IPhone will not find my network. Neither will my wife's. Has worked for one year, but suddenly, cannot find network. My Mac can find the network. Why not?
Both of our iPhones won't find the our wireless router. The router is fine with other devices including our Mac and Kindle. Tried reseting and got nowhere. Any advice?
Oh I see, thanks for the info guys.
I find it incredibly weird that after just one night it went from connecting to not connecting at all. Now when I manually input my connection, It shows it and shows bars but when I select it, it doesn't connect and just has a little spinning wheel next to the network name.
EDIT: It came back somehow when I tried browsing in safari and it asked for my password and wala! Weird but hope it doesnt happen again haha.
Similar Messages
-
Airplay works for one user but not for another on the same machine
I have the problem where airplay works for one user but not for another and both users are on the same machine. For the user where it does not work, everything appears normal, it's just that there is no sound being transmitted. I have tried restarting the Airport express, restarting iTunes, repairing disk permissions. Any ideas about what can be done to resolve this?
my /etc/group:
root::0:root
bin::1:root,bin,daemon
daemon::2:root,bin,daemon
sys::3:root,bin
adm::4:root,daemon
tty::5:
disk::6:root
lp::7:daemon
mem::8:
kmem::9:
wheel::10:root,hans,ibm,gast
ftp::11:
mail::12:
uucp:x:14:
log::19:root
locate:x:21:
smmsp::25:
http::33:
games::50:
network:x:90:
video:x:91:
audio::92:ibm,gast
optical::93:hal
floppy:x:94:hal
storage:x:95:hal
scanner:x:96:
power:x:98:
nobody::99:
users::100:gast
dbus:x:81:
hans:x:1001:
vboxusers:x:108:hans
policykit:x:1002:
hal:x:82:
kvm:x:78:
nx:x:85:nx
avahi:x:84:
camera:x:97:
gdm:x:1003:
gast:x:1004: -
Classic - text ringtones work for one contact but not for others
Just got the new Blackberry classic. I'm having trouble with the ringtones for the text messages. The custom ringtone works for one contact but not for the others. I have taken the same custom ringtone that works for contact A and used it for contact B but it only works for A. B sounds the default ringtone from the default profile instead of the custom ringtone.
I have deleted all contacts and done a re-sync thinking something was corrupt. That didn't work.
None of the contacts have a link.
I have changed the notification profile and it still doesn't work.
I have deleted a contact and recreated it manually. It still doesn't work.
I finally deleted my dad's contact and from the phone app created a new contact. I set a custom ringtone for him and it worked. I of course had to recreate all his other information manually. Please tell me there is some other way to fix this than recreating manually all 147 contacts in my contact list.
I read that if the phone number has the hypen or space it won't work, but my dad's contact info that I created from the phone app has the hypen and it rings with the custom ringtone. Also contact A has no hypen in the phone number and it rings the custom ringtone. So that didn't seem to matter.
I have spent hours on Google and see that lots of people have had this problem (but not everyone) but have not yet found a solution.
Surely someone has found a fix for this issue.Make sure that the contact has "Mobile" as the field for her number and not "iPhone".
Note that the iPad cannot send SMS messages. -
On my new iPhone, at the Apps store, I tried to make a purchase, the popup screen shows my Apple ID and asks for my password, but no keyboard appears so that I can enter the password. How do I get the keyboard to appear??
On your iPad, delete the existing account then sign back in with the new ID and password.
-
iPhone 5S seems frozen after downloading OS 8. It worked for a while, but now cannot turn off or on.
Hi NWL1,
Thanks for the question. If I understand correctly, the iPhone won't update and is stuck. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Thanks for using Apple Support Communities.
Have a great day,
Mario -
I have described for one year, but the Cloud storage still 2 Gb. Why I have not got 20 Gb?
You have the Creative Cloud Photography plan Student and Teacher Edition (one-year), the storage space is 2GB for this CCPP.
Are you facing any issue in installing this., please let us know.
Regards
Rajshree -
HELP!! WRT54G2 works for one computer, but not for the other
I have a WRT54G2 and it is connected to 2 computers. The internet works in one computer, but not on the other. The tech support said i needed to configure it or firmware or something like that. But my product is out of warranty and I really need the internet on the other computer as well. Please Help!!!
As your one computer is working fine then there is no problem with the router so far...
The computer which is not working...check the IP Address on that...
Click Start >> All Programs >> Accessories >> Command Prompt...A black box will appear(Command Prompt)...In the Command Prompt window type ipconfig and press 'Enter'...Look for Ethernet Adapter Local Area Connection IP Address , Subnet Mask and Default Gateway...
IP Address should be 192.168.1.x, Subnet Mask : 255.255.255.0, Default Gateway : 192.168.1.1 (assuming your router is 192.168.1.1)...
If you get the above mentioned IP Address, Subnet and Gateway Address then you should ping the Gateway, type ping 192.168.1.1 and press Enter...If it gives you request timed out then disable any firewalls, security softwares on the computer...
If you get 4 replies then type ping 4.2.2.2 and press Enter, if you get request timed out, then you need to upgrade your router's firmware...If you get 4 replies then type ping yahoo.com and press Enter...If you get replies for Yahoo then you should get the Internet after adjusting the browser settings...
Adjusting Browser Settings : Open an IE, click Tools >> Internet Options, then delete all files, cookies, history, forms...Goto "Connections", make sure Never Dial a Connection is checked, click on LAN Settings and make sure all the options are unchecked...Once you are done click on O.k...Close the IE and re-open it...
If yahoo times out then provide static DNS on your LAN Connection...
Click on the Start button >>> Settings >>> Control Panel >>>Network Connections- Right click on the icon for Local Area Connection and go to properties- On the 'General' tab select 'Internet Protocol TCP/IP' and click on the Properties button- Select 'Use the Following DNS Settings' Preferred DNS 4.2.2.2 Alternate DNS - 192.168.1.1>>Click on Ok button to Save and Click on "Close" on main Properties window...You should be able to go online... -
Safari works for one user but not another on same computer
MacBook with multiple user accounts. Safari (and Firefox) work fine for one user but are unable to open web pages when the other user is logged in. The error in Safar is "Safari can't open the page "http://xxxxxxxxx/" because it could not connect to the server "/xxxxxxx/" . DNS is working for this user. I am able to ping any number of sites from Terminal. Network Preference pane is configured to not require any proxy. This is a case of it was working but now it's not.
Can anybody help with this? I know I can fix this by simply creating another user and transfering the affected user's data to the new account but I would rather not. TIAHI Bob,
You can test your settings by clicking the big "Test My DNS" button at <https://www.dns-oarc.net/oarc/services/dnsentropy>. If you see "Poor" on any of the tests, don't use that domain name server! Remove it from Apple Menu => System Preferences =>Network =>DNS Servers or similar location in your router if you've got a 'home network'. If all you have is "poor" DNS servers in your list, call your ISP and insist that they give you the address of a name server which is protected against the recently exposed DNS cache-poisoning threat.
Also, open System Preferences/Network. Click the DNS tab. Add these numbers in the DNS Servers box.
208.67.222.222
208.67.220.220
See if that helps.
Carolyn -
Flash not working for one user, but not another on this CPU
Hi,
For user A on my computer most video will play in Safari, Firefox, and Chrome. But video at nfl.com will not play. The ads will play but not the actual feature.
I just found out that the videos on nfl.com will work for user B. I have rerun the Adobe Flash 10.1 installer in user A's account several times with no luck.
Are there permissions or libraries I should trash to try to restore this capability?
thanks,
SteveHI,
For user A on my computer
Try uninstalling the current copy of Flash, reinstall new, then repair permissions.
Uninstall Flash
Install the most recent version of Flash here.
Now repair permissions.
Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
You may also need to delete the Flash cache. Instructions here.
http://discussions.apple.com/thread.jspa?messageID=11672709�
If that doesn't help, install the v10.6.4 Combo Update It's ok to do this even though you are already running v10.6.4.
Carolyn -
Magic Mouse One-Finger Swipe Works for one user but not the other
For the main account on my iMac, I can use a single finger swipe to move back and forward within Chrome. However the second user (also an administrator) cannot use this setting and must instead use the two finger swipe in settings. Both settings are identical but the Chrome browser wont recognize the single finger swipe for the second user. The gesture works fine in Safari, but not Chrome. Any suggestions?
my /etc/group:
root::0:root
bin::1:root,bin,daemon
daemon::2:root,bin,daemon
sys::3:root,bin
adm::4:root,daemon
tty::5:
disk::6:root
lp::7:daemon
mem::8:
kmem::9:
wheel::10:root,hans,ibm,gast
ftp::11:
mail::12:
uucp:x:14:
log::19:root
locate:x:21:
smmsp::25:
http::33:
games::50:
network:x:90:
video:x:91:
audio::92:ibm,gast
optical::93:hal
floppy:x:94:hal
storage:x:95:hal
scanner:x:96:
power:x:98:
nobody::99:
users::100:gast
dbus:x:81:
hans:x:1001:
vboxusers:x:108:hans
policykit:x:1002:
hal:x:82:
kvm:x:78:
nx:x:85:nx
avahi:x:84:
camera:x:97:
gdm:x:1003:
gast:x:1004: -
-computername works for one computer but not multiples
Hello,
I am new to powershell and I am trying to run a basic command:
Limit-eventlog -logname Security -computername server1, server2 -maximumsize 6400KB
My computer and the two servers are both running powershell 4.
If I remove one of the computernames the command works fine...it doesn't matter which one, each one will work, they just won't work together.
The error message has nothing to do with the servers though:
"Limit-eventlog: the value supplied for MaximumSize parameter has to be in the range of 64 KB to 4GB with an increment of 64KB. Please enter a proper value and then retry".
It doesn't matter what value I try (64 KB, etc )it is always the same error with both servers. Remove one server and the command runs fine.
What is the proper syntax to use for multiple servers?
thanksHi,
This is the forum to discuss questions and feedback for Microsoft Excel, I recommend you post the question to the powershell forum
http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverpowershell
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. -
Drill Back from HFM works for one year, not another
Hello,
We are on FDM and HFM 11.1.2.1 and I was doing some reasearch in the system today and for some reason in all periods that were loaded during 2011 in this version (Aug-Dec) I am able to drill back to the FDM source data. However, if I go into 2012 and try a drill back for Jan or Feb it does not work and I get the below error message. I'm guessing there must be a setting I'm missing somewhere, but can't figure out why the year would make a difference here.
Error: No Locations were found matching the passed intersection values. Please verify:
1) that the target system (originating the drillback) is properly configured;
2) that the FDM POVs have not been retroactively modified or compromised.
Thank you,
JasonYes, that is what the problem was. After talking with Oracle support apparently when you upload new periods via the Excel template it does not update the tpovperiodadapter table, which is needed for the drill back from HFM to work. In order to fix this I had the DBA go in and manually update the 4 fields (see below) for the 2 periods we had already loaded for 2012 and all is working now. I also went back and deleted all of the other future periods and added them manually via the FDM web interface.
The table has the following collumns:
PeriodKey
IntSystemKey
PeriodTargetM
YearTarget
Period Key would be the period date
IntSystemKey would be the adapter system code that was used to load the data to HFM
PeriodTargetM would be the target Month in HFM
YearTarget would be the target year in HFM
Example:
PeriodKey - 1/31/2012 (format needs to be the same as what's currently in the database)
IntSystemKey - FM11X-G5-E
PeriodTargetM - Jan
YearTarget - 2012 -
Synaptics touchpad on 4540s works for one person but not another
The Synaptics touchpad on my ProBook 4540s (Win 7) works normally when I use it but when my wife tries to use it, the touchpad is unresponsive after a very slight initial cursor movement. (Anticipating replies - Yes, she casts a shadow, pictures of her come out normally, and she has a visible reflection in a mirror.) The touchpad sensitivity setting is maxed on light touch and cursor speed is maxed.
She has relatively small hands, and long nails, but she had no difficulty using the touchpad on our old HP dv9910us and has no problem with an iPad touchscreen. This week she tried the touchpad on a Sony VAIO that was so worn most of the original surface coating is gone, and had no problem moving the cursor on that machine either. She even tried the awkward solution of using her knuckle instead of her fingertip on the HP in case her nails were getting in the way, but that didn't work either.
Not having used a 4540s before, and not having access to another one to compare, I have no way to tell whether this is a bad individual touchpad unit or a design issue. If a design issue, what's the workaround? For instance, is there a skin I can put on the touchpad to increase its conductivity?A friend of mine bought a ProBook 4540s yesterday. At Microcenter we noticed that the touch pad often would stop working for her, and sometimes for me, but it usually worked for me. She bought the laptop, and we she got it home we noticed the same problem. I played with the touchpad a little and noticed this pad has a very narrow window of operation. With the 14.1" HP's like the nc6220 or nc6400, you can use one finger, two fingers, even three fingers, and the mouse responds nicely. However if too much surface area is in contact with the touchpad of the 4540s it doesn't work. Too much surface area is the pad of your finger. Because my friend has long nails, she was laying her finger pretty flat on the touch pad, and it wouldn't work. When I used the pad like this it wouldn't work for me either. Because I have short finger nails I have always used the lower end of my tip. This works pretty well with the 4540s. Pressure seems to have little affect. It is a matter of surface area, and the acceptable area has a small range!
-
Script works for one frame but not another
I set up 2 keyframes, each one loads a different text file
into a dynamic text box. The text box for the first keyframe is
named "session" and the text box for the second keyframe is named
"oneptq". The text file for the first text box is named Titles.txt
and the text file for the second keyframe is 100Q.txt. The code I'm
using is identical (except for the respective names of the text
boxes and text files) but for some reason the text will load in the
first text box but not the second.
Here's my AS for the first keyframe:
lvLoader = new LoadVars();
lvLoader.onLoad = function(success)
if(success)
session.text = lvLoader.textbody;
lvLoader.load("Titles.txt");
And my AS for the second keyframe:
lvLoader = new LoadVars();
lvLoader.onLoad = function(success)
if(success)
oneptq.text = lvLoader.textbody;
lvLoader.load("100Q.txt");
I can't figure this thing out. Please help. Thanks.Have you double checked that it's a DYNAMIC text box? Maybe
it was accidentally swapped by to static at some point... -
Hi just wondering if anyone can help.
We have an app (get i_player automator) that we have been successfully using for the last year or so. The other day our internet connection died mid download and the app stopped responding.
Rather than force quit darling hubby did something fancy with the terminal window (not entirely sure what but I remember kill, bash and gerlp??).
Anyway since then the app will start appear in the doc (bouncing happily up and down) but no window will open. This happens just on my log in. If I ctrl click the application is listed as not responding.
The app works correctly for other users on the same machine.
I have tried the following to no avail
Turning off and on again
Deleting the app and re installing
Any ideas?Most applications work user-per-user, maybe your darling has to do some more of that magic in the Terminal on your account?
Maybe you are looking for
-
Procedure for creating logical standyby database for oracle 11g?
Hi all, can anybody provide me docs /procedure for creating logical standby databse for oracle 11g standard edition. Aravind
-
Is it possible to syc my photos from the iphone4 to cpu or itunes to free up space?
Is it possible to syc my photos from the iphone4 to cpu or itunes to free up space?
-
I have a spry:region that feeds data to another spry:region and spry:detailregion. The setup works fine, but the first dsJobCategories TD doesn't appear selected via CSS. It pipes in the data to the subsequent spry:region and :detailregion without sh
-
Usually i use DTS or SSIS (microsoft) to import data to my Staging area. Now all my data is in Oracle 11g DB and I would like to replace my data transformation step to Streams Replication. I would like to ask, do you thing it is a good chose ? I'm Ne
-
Coldfusion 10 developer edition, download link required !!!
Hi, I need to install Coldfusion 10 developer edition for my project, please share the download link. Thanks in advance. Regards, Ankit