IPhone with iOS 5 not recognized by Aperture Import
I upgraded to iOS 5 on my iPhone and when I upgraded to Aperture 3.2 (on OSX 10.7.2) Aperture no longer recognizes my iPhone as an import device. It recognizes that something was attached that had photos for uploading on it, but no device shows up.
This is a solution that worked for me that I posted in another thread.
Similar situation: none of Aperture, Image Capture nor iPhoto recognised my iPhone 4 (iOS 5) as a device to import pictures from.
My solution
1. My setting for "When a camera is connected open..." was "No Application." I changed this to "Image Capture" (as it is the fastest to open).
2. I unplugged and then reconnected my iPhone.
3. Image Capture then automatically launched, with my iPhone and all of its pictures ready for import. The same occurred for Aperture and iPhoto (which I was just using to test).
I have now unplugged and reconnected my iPhone a number of times and have been able to import photos every time, using either Image Capture or Aperture.
Hope that helps!
Similar Messages
-
my iphone 4 is not recognized by itunes when i connect to it and tells me that the phone is in recovery mode, wants me to restore to factory settings. after i agree , an alert with error 9 stopped the sync. the phone wont start
Thanks for the response. There is no cloud icon next to them. All of the songs play on the phone still and no song was purchased through iTunes. I added them manually and tried to remove them manually. According to my iTunes they've been removed but they are still on my phone and working.
-
My IPhone 5S is not recognized on my Itunes so I cannot transfer music from my library to my phone. I use window 8.1 OS. My ipod touch is recognized so the problem is limited to my IPhone 5S. I have tried the solutions offered by Apple support What can I do?
I had a similar problem with my iPhone and fixed it. You might as well give this a try even if your iPod works. This is what I did. (Follow these steps):
1. Make sure your phone is not connected/plugged to your computer then continue on step 2.
(For some reason, apparently iTunes also get installed to iPhone's which makes it sort of faulty.)
2. By going to your computer's Control Panel - Uninstall itunes. To completely uninstall itunes you need to uninstall 5 programs in this very sequence. (You have to make sure you follow this in order.)
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
3. Then simply re-install the latest iTunes. Go tohttp://www.apple.com/itunes/download/ , on the left side of that page you'll see a blue botton that say's "Download Now". Press that button and it should allow you to make sure that you've downloaded the latest iTunes.
4. Once you've reinstalled it go ahead and start iTunes and connect/plug your iPhone to your computer. iTunes should now be able to recognise your iPhone.
5. If it still does not work try unplugging your Iphone again, restart your computer and connect your Iphone once more. See it your computer recognises your device.
Steps 1-4 worked out real well for me so I hope it does for you too. If still a no no why not try and contact apple themselves they should be able to give help.
Got all this info with an Apple person. Cheers. -
iPhone 5 is not recognized by iTunes 11.2 on Windows 8 pc after you updated your device iOS to iOS 7.1.1.
Hi calltimecasting,
Welcome to the Apple Support Communities! If your iPhone is not recognized by iTunes on Windows 8, I suggest the steps in the following article to get this resolved.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
I hope this helps,
-Joe -
Hello, so today I realized that my iPhone with iOS 6 is frozen on the music. I can get back to the home screen but I can't get the music player to work because its frozen on the w's and will not respond to touch. I would be grateful for any help on this.
Hi deamayfield,
Thanks for visiting Apple Support Communities.
If your Music app is unresponsive, try restarting/resetting your iPhone:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
Best,
Jeremy -
I have an iPhone with iOS 7.1.1 and am trying to update to 7.1.2, but get an error message "iTunes could not back up the iPhone because the backup was corrupt or not compatible with the iPhone"
Assuming you are using the current version of iTunes (11,2,2), open iTunes, click "Preferences" under the leftmost entry on iTunes' menu, then choose "Devices".
Find the iPhone's backup there, highlight it, and choose "Delete Backup". -
Since updating my iphone with iOS this morning, I am being asked for a 'passcode', it will not accept the no I have entered, I do not know who to contact?
Will it not open without a passcode?
Trr using your Apple ID password.
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Cheers, Tom -
Im trying to update my iphone with ios 5 but, for some reason its not giving me the option to do it? i've restored my phone once like it says do on the website and it hasnt done it? what can i do ?
Are you sure you have a 3GS and not a 3G? The 3G cannot be updated to iOS5. What version are you on now?... Settings > General > About > Version
-
HT1414 i can't complete the iphone with ios 6 my car is not valid and what should i do ?
i can't complete the iphone with ios 6 my car is not valid and what should i do ?
Try rephrasing your question.
What does your card have to do with it and how do you complete a phone with ios 6?
What exactly are you doing, and what is the exact message you're getting? -
I hv iPhone with ios 6.0.2
My iphone could not able to check for update…it’s just showing “checking for updates” with loading sign
How can I upgrade to ios 7?
Help plsI agree- I apologize if I sounded skeptical and attacking. In no way did I mean it to sound that way.
I completely agree on the software-hardware combo issue- this is why apple killed off 1G and 2G devices- because newer software revisions would never ever run well if at all on such ancient devices. can you imagine running iOS 6 on an iPhone/iPod touch 1G? That would be terrible. Let alone iOS 3 runs terrible on them and now are generally rendered useless due to newer App Store requirements (most require 4.3+ now to allow apple to kill off the older devices). forcing newer software on older hardware (apple, dell, HP,... Anything electronic this definitely applies to) will almost always yield less-than-par results. The other part is apple forcing you to upgrade by means of intentially making things obsolete. all companies do that.
All of this factual info aside, the issue at hand with the 5 is not a software-hardware combo problem- those are most widely seen with the major revisions. then again, this isn't the first time apple has gotten caught up in battery drain snafus (even iOS 5 was plagued with this as well- and now there are some people desperate to roll back but can't). it basically waters it down to the point where keeping the stock software will always yield the best results even though newer versions provide better features- it all depends on whether or not the person deems the added features are worth a performance hit.
PS. I'm still at 100%- and I've been using it periodically throughout the day. your combo worked for you, but didn't for me. And may or may not work for others- As the tech world would say, mileage may vary.
PSS. What model/carrier do you have? Just wondering. -
Hi all ,i had a 3G iphone with IOS 4.0.2, my new iphone is 4 (IOS=7.0.2), the backup from 3G to 4 does not restore. (eror=restoring backup session failed) , help me plz for restoring ?! TNX
<Personal Information Edited by Host>Well, first off, you are not addressing Apple here. This is a user to user PUBLIC forum. You should not post your personal information like that. Try closing iTunes, reboot the computer and connect again. Are you using the latest version of iTunes, v11.1?
-
My iphone is blocked and I am being told to plug it in to itunes but the itunes it was set up with is not recognizing the device - can anyone help?
I also live in the United States so redownloading shouldn't be a problem.
-
HT201628 My ios device(iphone 5s) is not recognized in Itunes and I am using windows 8.1
My Iphone 5S is not recognized in Itunes. I am using windows 8.1. What is the problem as I am not able to sync anything on the computer to my Iphone 5s?
Use the article about this issue from the support site
http://support.apple.com/kb/TS1538 -
My iPhone 5 is not recognized by iTunes
My iPhone 5 is not recognized by iTunes. My iPhone is iOS 7.0.4 and my iTunes is 11.1.4. When i connect my iPhone to the computer, all that happens is the file view opens and shows how mush usage i have left on my phone. And when i try to connect it to iTunes, it does not recognize my phone at all. When i used to plug my phone in, iTunes would automatically pop up and i was able to download music or whatever to with iTunes.
Read this iPhone not recognised by iTunes on PC
-
When I plug in my ipod to my laptop instead of my desktop, nothing pops up to sync it. Has anone had any problems with itunes not recognizing an ipod?
Hi sarahdavis0_o,
Welcome to the Apple Support Communities!
If neither your iPod or iPhone are being recognized by iTunes when connected, I would recommend the steps in the following article.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Have a great day,
Joe
Maybe you are looking for
-
Problem with the new server UCS C220 for set IP to CIMC
Hi We've a problem with the new server UCS C220. We bought two servers UCS C220 M3 for CallManager 8.6 with High Availability. When we turn on the server during the boot and when it tells us, oppress F8 to enter at the CIMC and set the IP. But it nev
-
Same line Item but two differentreceiving IDOCS
Folks I am new to SAP PI and seeking your help in the following scenario legacy -> SAP PI -> branched to two idocs in ECC The scenario is that a fixed length flat file coming from Legacy wil contain some line items but each line will be a separate i
-
Preview size & quality settings
Although I have been using LR for many months I am still confused as to what to set my import settings to when it comes to previews. Standard or 1:1? What quality settings? Can anyone enlighten me on best practices?
-
Hi all i am new for webdynpro, i have one doubt "how to do validations in webdynpro abap for a perticular report" thanx in advance karuna
-
Hello Gurus, I have some amounts on the dimensions member property and pulling them using 'evpro 'into to the evdre for reporting purpose and when trying to the some calculations on those values, system is not considering them as numbers and taking