IPhone with my car ipod connection

I have a 2007 with the built in ipod connection...will my iphone work in my car? im scared to plug my iPhone in. Please Help, thanx.

It works if you plug it in I plug mine into my stereo iPod connection and it worked. It does tell you that its not compatiable when you plug it in, and then it gives you the option to switch to airplane mode just click no. I use it all the time I haven't really had any problems. Hope that helped.

Similar Messages

  • Integrating the iPhone with the car

    I have been wondering what I could do to integrate my iPhone with my car's custom stereo.
    Could a cable like this: http://www.wirelesshut.com/0/10424871.html work properly? Both ends would fit into their respective ports and such, but with the iPhone sometimes giving error messages such as 'You can't use such and such product with the iPhone', I would like to know before hand if this feat is possible.
    Any body have any prior experience?

    im assuming you dont have factory installed stereo equipment....
    first i would actually contact the manufacturer to see if the iPhone is compatible...
    i bought an alpine system w/bluetooth & ipod capabilities last year, got the phone recently and was told that the bluetooth will not work with the iphone, but the ipod function will work, but if i use it as an ipod and its connected to my car's system, the phone function wont work

  • After updating with IOS7, i can no longer control the music on my iPhone with my car controls. I have deleted the phone and re-synced it twice????

    After updating with IOS7, i can no longer control the music on my iPhone with my car controls. I have deleted the phone and re-synced it twice????

    Go here: http://www.apple.com/feedback/iphone.html and report it with as much detail as possible.

  • Here's the exact scenario with it: 1) Ipod connected successfully to iTunes. 2) Drag song from Library(in AAC format) to My Ipod. 3) Song plays successfully in iTunes. BTW: This is one of the songs from my cd. Not bought. 4) Eject Ipod. 5) Find song in

    Here's the exact scenario with it:
    1) Ipod connected successfully to iTunes.
    2) Drag song from Library(in AAC format) to My Ipod.
    3) Song plays successfully in iTunes.
    BTW: This is one of the songs from my cd. Not bought.
    4) Eject Ipod.
    5) Find song in Ipod and press play.
    6) Display for song and time appear.
    7) About 1/3 of a second of the song plays, then it cuts out and restarts itself. (boots me back to apple logo)

    Nope - and it was set to not look for them.
    The final clue came when I tried hooking the drive directly to the computer, instead of to the airdisk. iTunes still hung. Then I disconnected the drive and tried to run it, and iTunes came up right away - but with an ! next to each song. Clearly it was trying to find/touch every file in the library on first startup.
    I didn't try plugging in the drive and leaving the hanging iTunes running for more than a few minutes, so it's possible that it would have recovered and launched. But after removing the XML file, restoring the library to my pre-7.7 version, I could hear it accessing the directly attached drive (and see it in disk activity in the monitor) for a few minutes (less than I'd left the hanging one trying), before it came up.
    Conclusion:
    1) 7.7 is definitely trying to touch/see all the files in the library on first launch (proved by the ! when they are missing).
    2) Disconnecting/interrupting the touch/see MAY have corrupted something (can't prove it).
    3) Since touching 10,000 files takes a LONG time even at 802.11n speeds (let alone b or g), it's worth the hassle to plug the drive in directly for the first time.
    4) Patience is a virtue

  • Why can I charge me iphone with my car's usb port but not my ipad?

    Why can I charge my Iphone in my car using USB connection but not my Ipad?

    Because the iPad requires a lot more power to charge than your iPhone, and typically car and computer USB ports simply don't proivide that much.
    Its the same reason your iPhone comes with a 5Watt charger (and even then the iPhone only uses part of that) while the iPads come with the 10 or 12 watt charger.
    They just need more power.

  • After setting up bluetooth with my car , nano connection fails

    followed instructions to pair and connect, stereo says connected , nano says failed

    Same problem? My partner bought the latest iPod nano, tried to pair it with the car stereo in her MINI. The stereo recognised the iPod, said it was successfully paired with it, but the iPod says the connection failed. I cannot find anywhere that confirms whether the MINI (2011 model) has bluetooth that supports A2DP. If anyone knows for sure, I'd appreciate knowing.

  • Hello I just bought a car VW scirocco and I can't pair the iPhone with the car as the car says that the phone is not compatible so what can I do ?

    Please I want to know what can I do to pair my iPhone to my VW as the car says that the phone is not compatible and I tried other phones and it worked very good.
    Thanks

    You must change or bluetooth module to a more recent one. It's under the passanger seat.
    I use this one: 5N0 035 730D. It works great on with the iPhone. You can even play musics from the iphone to the radio (on RCD 510 or RNS 510) wirelessly, using BT-Audio.
    I think you can buy it on ebay. It's relatively cheap.
    BTW, is your board computer red or white? If it's red there is no bluetooth module comptible with your car and the iPhone. It must be white.

  • Remote app on iphone with Itunes library / Erratic connection problems.

    I have been using Remote app on my Iphone to manage Itunes for months with 100% pleasure and 0 trouble.
    For a few days, it has some erratic behaviour like having difficulties to connect to my Itunes library.
    In such case if I touch the Change Library button on Iphone remote screen, it connects quite instantly...
    I have a simple wifi network generated by my adsl box and a single computer.
    The remote setting option "stay connected" on Iphone is On.
    Generally when I get connected if I quit remote on Iphone and restart it within a minut it will find the library in a jiffy most of times ... but sometimes not.
    I disabled firewall : no change.
    I scratched all remotes in Itunes and paired the Iphone again : no change.
    Does anyone with some idea ?
    Thanks in advance.
    Jean.

    Almost the same issue here. And this only started yesterday.
    Initially iTunes would not pair at all, but I went into add/remove programs (Win 7 PC) and ran a repair on Bonjour, Apple Mobile Devices, and iTunes. I did not remove or reinstall any of these applications.
    After this my iPhone remote app would be found by iTunes, the passcode accepted, plus the library showed up. I thought I'd cracked it...
    But after a few minutes - usually when the screensaver kicks in on my PC - my iPhone loses connection to my library and WILL NOT reconnect unless I restart iTunes.
    I have to say that over the years the remote App is without doubt THE most buggy, inconsistent and erratic piece of software I have ever used. If there was a decent alternative I'd have ditched it a long time ago.
    Looking forward to a solution from one of the experts here (not expecting Apple themselves to even respond!).

  • I bought iphone from Canada but now I'm in Thailand and I upgraded to ios6 but I couldn't turn on wifi and back up on icloud so I want to know that how can I claim my iphone with apple care because no apple store in Thailand. Thank you.

    I bought iphone from Canada but now I'm in Thailand and I already upgraded to ios6 but It doesn't work well.I couldn't turn on wifi and back up on icloud so I want to know how can I do with my iphone because no apple store in Thailand.Can I send it to any apple care which is easy and near my country? Thank you.

    You can find a local shop and pay to get it fixed or you will need to send the phone to someone you know in Canada and have them take the phone into Apple for service. Then they will need to ship the phone back to you. The warranty is based in the original country of purchase.
    Decide which is your best option.

  • Pair iPhone with alpine car radio

    My iPhone 5 won't pair with the Alpine radio in my car. The iPhone 4 did it with no problems.

    I have an Alpine CDE-103BT, had an iphone 4 paired to it. When I got my iPhone 5 I couldn't get it paired. It saw the unit but using 0000 failed each time even though the Alpine manual said to use it and that worked with the iPhone 4. I bought the Stereo at Crutchfield which has lifetime support for anything you get from them. After several hours of searching and reading forums I broke down and called Crutchfield. Supplied my order number and explained what was happening. They told me even though the maunal say use 0000 , try 1234 . Did 1234 and I now have the iPhone5 paired to my Alpine.

  • Selling iPhone with Apple Care Protection Plan, Transfer required?

    I am selling my old iPhone 3Gs (just upgraded to the 4s : D ) and it has two months of Apple Care Protection Plan left on it. I was wondering if it was necessary to transfer ownership of Apple Care Plan. The reason I ask is I cannot find my original receipt for the iPhone, nor the Apple Care paperwork, though I do have the original box with UPC.
    I have heard people say that the Apple Care Plan follows the phone and not the owner, therefore the new owner would have no trouble getting service on this phone. However, when I tried to request service (just to see if he could do it) it asked me to log in with an Apple ID. I am wondering if the new owner entered his ID, could he request service? Or would it have to be my Apple ID?
    So I have two Questions:
    1) Do I really need to transfer the plan over to the new owner for him to be able to get service?
    2) Do you think apple would even transfer the plan without the Apple Care documentation, or the original iPhone purchase reciept?
    Thanks in advance for the help
    -Vorsicht!!

    See
    Is the AppleCare Protection Plan transferable? = Yes.
    From Here
    http://www.apple.com/support/products/faqs.html

  • I backed up my iPhone with a different iPod by accident and it deleted everything and replaced it. Any way I can "undo" the back up so the iPhone is back to normal?

    I did something incredibly stupid. I plugged my iPhone into my computer, and when iTunes asked if I wanted to back it up, I said yes. It asked if I would like to back it up as a new iPhone or from an older backup the computer had saved. This is an old iPhone (4S) so I clicked on an older backup. I assumed it would just add on to the current iPhone's contacts and photos but it replaced all of them with old contacts and photos.
    I have completely lost all contacts and photos and videos and they have been replaced with contacts from a different phone owned by someone in my household. Is there any way at all to undo this backup and get my old phone back?

    Just restore you phone with the correct backup if you have it

  • Adapter for in-car iPod connection

    Is there an adapter for iPod Shuffle 2G or iPod Nano that will let either one of these play through my in-car (2006 Scion xB) dock?

    Thank you for your reply.
    Hope it counts as a suggestion for a next iteration

  • Iphone with home wifi network connection

    says unable to join network when I try to manually join wifi at home

    I have the same problem and called Apple. The first perrson I spoke to said he hadn't heard about this BUT he put me on to a senior tech who said Apple definitely knows about this problem and he asked me all kinds of questions about my home system. He said that mine was the first case he'd encountered where the iPhone 5 wouldn't connect to a Time Capsul but I don't believe that for a second. So if you, too, have this problem, please post what kind of router you are using. I'm sure Apple is monitoring this issue, or at least I hope they are. I am so angry at myself for buying this phone. Apple should be ashamed of themselves for selling it when it is not ready for the marketplace. This problem deserves to be reported by the press.

  • IPhone with IOS "Trust this computer" keeps popping up

    I have upgraded to ios 7 on my iphone, but when I now connect my phone to my car (ipod connectivity) it pops up with the "Trust this computer" box! but disappears quickly and then keeps popping up and disappearing.  I don't even have time to click TRUST!!!!
    After a couple of tries the car says there was an error and stops trying.  What the **** is going on!
    If no one knows, maybe you can tell me how to downgrade/restore to ios 7 as without this connectivity I can't listen to my music in the car?

    I finally fixed it!  Don't know really how but here goes what I did.
    You all agreed that before IOS7, by simply plug usb cable between PC and iphone that was it?!
    Updated to IOS7, liked it a little, noticed slowness, but was fairly acceptable. My problem started when I was not able to sync my outlook calendar, contacts, etc. to my phone then I freaked out, because kept having this "do you trust this computer again and again when I clicked Trust.... got me crazy.
    Someone told me to use iCloud. Did, but I can check my Iphone contacts on a website! not what I was looking for. Then I downloaded ICloud for windows, so I can sync (another procedure) to my outlook. Ran it, restarted, found that my wlan card was disabled, fixed it, restarted (anxious), when back, checked some changes made in outlook, more folders and buttons, but it seemed to work.
    I plugged the usb cable and iphone to my pc and Viola! they synchonized!! via usb cable!!
    was it the cable? the icloud installation? the rebooting? don't really know, but it works now...
    I was this close to return to IOS6 by doing all those creepy steps, but it is ok now...
    Please let  know if it work for you guys!!
    cheers!
    Manny

Maybe you are looking for

  • Is there a workaround for making CanoScan8400F scanner work with OS 10.9?

    I have a Canon 8400 F scanner and a brand new IMac running OS 10.9 The scanner does not work with its original driver disk, (Apple does not support power PC )... I tried downloading the european driver but the IMac didnt seem to like that either. Any

  • Converting XML string to internal table

    Hello everyone, I am trying to convert an XML string to an internal table. The format of the XML string is as follows: <node label="Compressors" NODE_ID="783" checked="1" expandStatus="false">    <node label="Nail guns" NODE_ID="78543" checked="1" ex

  • Is there an easy way to find apps that will run on an ipod touch gen 2 with iOS 4.2.1?

    My grandson's ipod touch gen 4 was stolen so I picked up a used ipod touch gen 2 only to find out I can't upgrade beyond 4.2.1 iOS, so I am trying to find apps that run on that iOS. Enter an unfriendly App Store for those of us not used to using it!

  • Print order confirmation at multiple branches

    I need to be able to print an order confirmation ( sapscript ) to all of the sourcing plant specified in the items.  We are using the standard print program, RVADOR01.  The copies need to print to the default BA00 printers set for the branches. How c

  • Background jobs - AE session environment setup incorrect ?

    Hi, I am trying to accomplish a small email queue myself, as due to the current privileges I have no access to the HTML Mail queue myself. Thus I stored emails to be send in a regular table.. Sofar so good. In order to really email the pending messag