Iphone won't charge after overheat warning

Ok so every night I go to sleep I plug in my phone to charge, play some youtube videos or listen to music or podcasts( on the official apple app) until i fall asleep and every morning I have woken up to a fully charged phone, I have been doing this for about 1Year and 5Months no issues, however about a week ago I fell asleep listen to a podcast, whilst my phone was charging, when I woke up  the next morning I went to grab my phone and found that there was an overheating warning, i mean It was so hot I couldn't hold the phone for more than five seconds, so I placed it on my window sill(outside) for five minutes and it cooled down and worked perfectly, next few nights I listened to music and the issue didn't occur, however, two nights ago I listens to a podcast again and when I woke up the next morning my phone was 100% charged but boiling again with the heat warning, this time I hung it in front of my fan until it cooled down, after a full days use of my phone( no performance issues) I went to charge it up, this night I did not listen to anything, when I woke up the next morning 10hours later my phone had gone from 10% battery to only 18%, it had been like it ever since and just won't charge, is there an issues withy charging dock on my phone or my battery? Many thanks
(i have already cleaned charging dock with toothbrush and tried different sockets and leads)

(SOLVED)
After 10+ hours, Since it works in the BIOS screens, I decided to wipe the drivers.
Plugged my phone into a driverless windows and it works fine.
The reinstalled drivers did not work for me because I didn't manually wipe the driver files
Plugged my plugged my iPhone in and everything suddenly works
Next I have to go to war with my malfunctioning windows update
Thanks zelous for the suggestion, though it didn't work because my iPhone wouldn't connect at all. it did point me in the right direction. Thanks!

Similar Messages

  • After upgrade to Lion, iPhone won't charge after Mac goes to sleep

    I did a clean install of Lion, and have run Software Update. There are no problems with the system, but I noticed that when I plug the iPhone in to the Mac, it won't charge when the Mac goes to sleep.
    The iPhone gives the normal charging tone when it gets plugged in, and if I l press the Home button, it displays the charging screen. If I select Sleep from the Apple menu, the Mac goes to sleep and the screen on the iPhone blinks on as if not plugged in, showing the normal unlock screen. When I wake the Mac, the phone beeps and shows the charging screen.
    Is there a setting I can change to get the iPhone to continue charging after the Mac goes to sleep?

    This behavior is new in my experience, having been on Snow Leopard. I've always just plugged the iPhone into my keyboard since it is very convenient, and it has always charged overnight, even while the Mac slept. So this is not normal behavior for my system.
    My question is, has this changed in Lion?

  • Iphone 5 won't charge after being dead for three days.

    Iphone 5 won't charge after being dead for three days due to power cable breaking. I got a new cable and it still will not charge. Is my phone broken in any way? What can I do to fix this?

    Hey TalkBack12,
    These are the recommended troubleshooting steps I found for when your battery does not charge:
    Battery does not charge
    Verify that the outlet being used is working.
    Try another USB power adapter if available.
    If no other USB power adapter is available, try connecting to a high-power USB 2.0 port (not a keyboard). The computer must be turned on and not in sleep or standby mode.
    Try another USB cable if available.
    via: iPhone and iPod touch: Charging the battery
    http://support.apple.com/kb/HT1476
    Since you got a new cable, I would concentrate on trying a cable other than the new one.
    Welcome to Apple Support Communities!
    Sincerely,
    Delgadoh

  • Iphone 5 won't charge after reaching 100% battery

    iphone 5 won't charge after reaching 100% battery. what happen to it?
    update: i slove it already. i don't need your help now.

    Charging automatrically stops when your battery is full...that's done by design.

  • Iphone 4s won't charge after updated to ios 6.1.3

    iphone 4s won't charge after updated to ios 6.1.3
    Different adapters and usbs have been tried, and now power has been drained.
    Apple support says there is nothing they can do about it, and they surggested me to pay 199 for a new iphone.
    Is there anybody having the same problem?

    I'm having the same issue with iphone 4.
    Seems to work ok after i connect it to itunes but then the next day i have to do it again.

  • My i-Pad2 won't charge after I downloaded some new stuff from i-Tunes.  A note appears on the screen "Charging is not supported with this accessory".  I have tried charging through two computers and with the wall socket plug (with another cable).  I have

    My i-Pad won't charge after I downloaded some stuff from i-Tunes.  I have tried charging through two computers and using the wall socket,, with different cables.  I have turned the i-Pad off & on a couple of times but it still won't charge.  Any ideas will be gratefully received.

    The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
    In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
     Cheers, Tom

  • TS2734 my iphone won't beep after being located with find my iphone

    my iphone won't beep after being located with 'find my iphone' app.
    battery is fullly charged. the phone is not muted

    The phone "beeps" only if "Play Sound" is ON and after clicking "Send" (even if no message).  Just locating the phone doesn't make it beep.

  • My iPad won't charge after plugging into my computer and after holding down the power and home button at same time for 10 seconds- Can anybody help? Has IOS7.0 but the most up-to-date version

    My iPad won't charge after plugging into my computer and after holding down the power and home button at same time for 10 seconds… Can anybody help? Has IOS7.0 but not the most up-to-date version

    It's just the battery sign - nothing else. I've tried to reboot by holding down both power and home key for 10+ seconds, waiting for the apple logo - but nothing happens. It's plugged into the imac at the moment. I tried to recharge it overnight using the normal charger - but no luck. It went dead during a Skype call with a friend - even though it was powered into the mains - albeit at a low battery level at the time

  • Ipad 3 won't charge after updating to ios 6. even with apple charger

    ipad 3 won't charge after updating to IOS6. even with apple charger. just say "not charging" next to the battery symbol

    Hi,
    I did this after reading the forums and it made no difference. it has actually charged from 14% to 67% but thats taken over 12 hours.
    Will monitor it and if no joy will go to a apple store
    Thanks

  • I connect my iphone 4g on charging after some time it is complete dead and very heat up please help me.

    i connect my iphone 4g on charging after some time it is complete dead and very heat up please help me.
    helllllllllllllllllpppppppeeeeeeeee me

    There is no such thing as an iPhone 4G.

  • My iphone won't work after fatal error occurred installing iOS5.1 have followed allsteps to reconfigure software onto windows still no phone just a usb and itunes picture on screen

    my iphone won't work after fatal error occurred installing iOS5.1 have followed allsteps to reconfigure software onto windows still no phone just a usb and itunes picture on screen

    Connect the phone directly to the computer, not a hub.
    Disconnect all other USB devices except keyboard and mouse.
    Disable your firewall
    Disable your antivirus
    In iTunes if it recognizes the phone click "Restore"
    If it doesn't recognize the phone:
    Disconnect the phone from the phone end, leave the USB cable plugged into the computer
    Hold the HOME and SLEEP buttons until the screen turns black, excactly 10 seconds, then release the SLEEP but continue holding the HOME (If an Apple logo appears you have held SLEEP too long; do it over)
    While holding HOME connect the cable to the phone
    As soon as iTunes recognizes the phone release the HOME button and it should restore.
    If neither procedure works note the exact error message and post it.

  • My ipod shuffle won't charge after not being charged for a month... did the battery officially died?

    my ipod shuffle won't charge after not being charged for a month... did the battery officially die?

    maybe you can control the room temperature.... i try to charge iPod shuffle beside the mini fan, so heat from shuffle can blown away... or maybe, you can charge the iPod in Air Conditioned room....
    i think this device have a mechanism to cut off the charging process if device temperature too hot. such a safety system so this ipod won't burn out when overcharging.
    i hope it can help you...
    and trust me IT WORKS....

  • IPhone 6 won't charge after 8.02 update

    Hi,
        Since the 8.02 update my iPhone 6 won't charge from any of my 3rd party cables and will only charge using the apple cable; despite my 3m cable being "apple approved" and the battery indicator showing its charging on the phone, the power still goes down even while it's plugged in and it's saying the phone is charging. I'm just wondering if anyone else has had this issue since the update? All chargers are working fine on my iPad running 7.1.2 and worked fine while I was using 8.01 on my phone however since updating to 8.02 the only charger that seems to work is the official apple one which I'd rather not use as they aren't long enough. Any help would be appreciated.

    For the iPhone 4S, Apple seems to have used a faulty WiFi chip which in some cases seems not to be able to handle the load of the iOS. This can lead to overheating issues which can eventually cause a hardware failure
    As customers in good faith we bought this product
    We paid a large amount of money  (I paid some $800 last year) since we believed we bought a quality product in the believe we could use it -with good care of course- for at least 2, 3 or even 4 years to come
    We upgraded the firmware from iOS 5 or 6 to iOS 7 since Apple advised us to do so (as is very obvious from the constant messages in the settings menu of the iPhone and in iTunes)
    We followed all the regular procedures as advised by Apple in the upgrade
    There is no way how Apple could hold us responsible for having done a 'wrong' installation, making us responsible for our own actions.
    Apple has been aware for over a year the Apple 4S WiFi chip is not reliable (A Google search on iPhone 4S Wifi greyed out will proof my point) and was therefor fully aware this "greyed out" problem - which also occurred when iOS 6 was introduced, might very likely occur again with the introduction of iOS 7.
    Since Apple did not inform her customers of this risk the customers were not given the choice to either upgrade (knowing the risks) or staying with the previous (working) version.
    Apple does not enable the users to return to the previous version of iOS, and even if Apple would allow the users to return to a previous version, there is a great risk the hardware has become seriously damaged already in the upgrade to iOS 7, making this not a feasible option.
    As result of this us, we, customers are now stuck with an unusable iPhone for which we paid plenty of money and so support from Apple whatsoever in solving this issue.
    I feel that Apple should take their responsibility and help her customers in solving this quality issue.
    ( One thing I am sure of, if Apple would be a car manufacturer or an airplane manufacturer they would never get away with this, and would be forced to do a recall)
    My message to Apple:
    You know thousands of your customers are affected by this fault. It is now time to act. Taking responsibility never hurts (even if you for some reason feel you are not fully to blame) It gives you credit. And credit gives you loyal customers.

  • IPhone won't sync after upgrading to Leopard

    My iPhone won't sync, or even show up in iTunes, after upgrading to Leopard. I've tried restarting my Macbook Pro, trying different USB slots, closing and reopening iTunes, everything. Has anyone else had this problem??
    I've tried everything apple suggests:
    1. The iPhone battery might need to be recharged. For information about charging iPhone, see "Charging the Battery" in the iPhone User's Guide.
    2. If that doesn't work, disconnect other USB devices from your computer and connect iPhone to a different USB 2.0 port on your computer (not on your keyboard).
    3. If that doesn't work, turn iPhone off and turn it on again. Press and hold the Sleep/Wake button on top of iPhone for a few seconds until a red slider appears, and then slide the slider. Then press and hold the Sleep/Wake button until the Apple logo appears.
    Note: If you enter the PIN incorrectly three times, you may need to contact your carrier for a Personal Unlocking Key (PUK) to enable your SIM card again.
    4. If that doesn't work, restart your computer and reconnect iPhone to your computer.
    5. If that doesn't work, download and install (or reinstall) the latest version of iTunes from www.apple.com/itunes.

    You might need to remove and reinstall the Apple Mobile Device Service. Follow the link below for info on how to do this.
    http://docs.info.apple.com/article.html?artnum=306637

  • Ipad won't charge after upgrade to 7.1.2

    Apple recommened install update.  After the update started having problem battery won't charge.  I took it to the apple store last July 13 they did hard reset it work for one day and went back to the same problem won't charge.  Please help

    Could be the charger, cable or iPad. Plug the USB cable into your computer. It may say "Not Charging", however, it is charging slowly and will verify that the cable is good. If your computer/iTunes does not recognize the iPad, then the cable is probably bad.
    Try this first -  Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
    The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- %20beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    iPhone: Hardware troubleshooting (Power/Battery section also applies to iPad)
    http://support.apple.com/kb/TS2802
    http://www.overthought.org/blog/2014/the-ultimate-guide-to-solving-ios-battery-d rain
    http://www.overthought.org/blog/2014/the-ultimate-guide-to-solving-ios-battery-d rain
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    iOS 7 Battery Life Draining Too Fast? It’s Easy to Fix
    http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/
    Poor battery life after installing iOS 7.1? Try these simple tips
    http://www.zdnet.com/poor-battery-life-after-installing-ios-7-1-try-these-simple -tips-7000027348/
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    iPad: Charging the battery
    http://support.apple.com/kb/HT4060
    Charging Tip - Switching to airplane mode turns off battery-draining wireless and cellular access, allowing your iPhone/iPad to recharge up to twice as fast.
    Best Practices for iPad Battery Charging
    http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
    How to Save and Prolong the battery life of your new ipad
    https://discussions.apple.com/thread/4480944?tstart=0
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
    iPhone, iPod, Using the iPad Charger
    http://support.apple.com/kb/HT4327
    Install and use Battery Doctor HD
    http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
    To Extend a Device’s Battery Life, Get to Know It Better
    http://tinyurl.com/b67c7xz
    iPad Battery Replacement
    http://www.apple.com/batteries/replacements.html
    In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
     Cheers, Tom

Maybe you are looking for

  • New to Mac and faced with a series of errors...!

    Hey, I recently decided to get myself a Macbook Pro as I had always wanted one and had the funds at the time. I know Apple is renowned for its meticulous testing and design of all its products but I think I may have been on the end of a bad bunch. Er

  • RPC Error in ISE but not when I run manually in console

    I'm having a very strange issue. I developed a function that invokes SCCM Machine policy refresh on a remote computer: Function Refresh-SCCMMachinePolicy { param($computer = $null) $ms = new-object system.management.managementscope $ms.path = "\\$com

  • Exporting interactive document to PDF

    Hi, I just exported my interactive document (CS5) to PDF (interactive) and ticked include all buttons and media. When the PDF opened no behaviours worked and the PDF was much bigger in pixels then it was made in Indesign. any help appreciated. thanks

  • IDE:  Child movieclip timeline changes don't show in parent timeline?

    Why does a child movieclip only show the first frame within the IDE, regardless of where you are in the parent timeline? If you throw a movieclip with 25 frames onto the main timeline, which also has 25 frame, you don't see the nested movieclip's fra

  • Intermediate result between two message mappings

    Hi, we have a Scenario with an Interface mapping, which is created from two message mappings. The first one receives the source message and the second one sends the target message. I have a trouble with finding the intermediate result between the two