Iphone won't power on after screen replacement

So I've dropped my Iphone 4S once and screen showed blue vertical lines. I replaced the screen for about $120. After 6 months or so I dropped it again and the screen cracked. I decided to replace the screen on my own so I got a new one and replaced it, but the phone doesn't power on after the screen replacement. I plugged it on charger, did a hard reset but still nothing. I plugged it on pc and it was recognized by the itunes! As it was plugged on pc, I did a reboot again and it left itunes as if it was powered on and suddenly powered off. Still plugged in I tried to power it on again, it was recognized again by the itunes but the screen still wasn't working. Another thing is that it burns a lot without even being on charger or on pc, and I need to take the battery off.

Sorry. There's not much we can suggest. Apple won't touch that phone now.
Try looking for advice someplace like ifixit.com.

Similar Messages

  • Iphone 4s wont power on after lcd replacement

    A friend dropped his phone quite badly and required a lcd replacement, after swapping it over, when I power it back up it just constantly flickers? Like its trying to power on. There is life in the battery.
    Anyone have any suggestions on this? Thanks

    Good to hear it all worked out for you

  • IPod touch 4th gen won't turn on after screen replacement?

    I took apart the iPod about 4-5 days before I put the new screen on it, and I don't remember if I turned it off before removing the screen. I got the screen and I have been working on it since Thursday the 23.. It will not turn on and I am getting frustrated. I have tried the "Locate the 3.7v and ground it." thing.. It sparked once, I connected it to the power and it didn't turn on either. Please any help, anything that helps please! Thanks in advance.
    Also, my computer does not read the iPod when it is plugged in. The iPod acts as if its turned off but doesn't turn on at all.. Any help please! Thanks!

    Take it apart and make sure that all connections are correctly made and that there are not any broken conductors in any ribbon cables.
    iPod Touch Repair – iFixit
    Next take/send the iPod to someone who has more experience with iPod repair.

  • IPhone 5 keeps turning off after battery replacement

    iPhone 5 keeps turning off after battery replacement. After 10 minutes or so, the phone freezes and shuts off, can't even use it anymore.

    Hi there Luke811813,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    1.Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    2.Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    3.Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    4.After at least 15 minutes, if:
    •The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    •The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    •Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    5.If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    •If the display turns on, go to step 4.
    •If the display remains black, go to next step.
    6.Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    7.If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Issue not resolved
    My issue is still not resolved. What do I do next?
    Contact Apple Support.
    -Griff W.

  • My iphone 4 turns off automatically after screen lock

    Hello guys,
    my iphone 4 turns off automatically after screen lock, i have to press the POWER + HOME button during 10 secondes for reboot.
    And it's like that every time i lock the screen.
    Please can someone help me ?
    thanks.

    Standard troubleshooting steps are reset, restore, restore as new.
    Since resetting isn't working, try backing up and restoring through iTunes.

  • How to fix white screen of death on iPod 4g after screen replacement?

    How to fix white screen of death on iPod 4g after screen replacement?

    I would try to reset it before anything else.  To do this press and hold the home and power buttons until the the white screen shows the apple logo (~ 15 secs.).
    If this does not work then more than likely the LCD is damaged.
    btw- The white screen is common after repairs.  The reset fix works 90% of the time.
    iRefresh ltd.
    http://www.ipodrefresh.com

  • Iphone won't power up.

    My iphone won't power up since yesterday morning. The back of it got a little wet on Saturday night but was working fine until yesterday. Any suggestions ?

    It would help if you would clarify what " I have tried everything" means.
    Have you tried restart, reset, restore?
    Page 34 of the manual:
    "If something is not working right, restarting or resetting iPhone will likely solve the
    problem.
    Restart iPhone: Press and hold the Sleep/Wake button until the red slider appears.
    Slide your finger across the slider to turn off iPhone. To turn iPhone back on, press and
    hold the Sleep/Wake until the Apple logo appears.
    Reset iPhone: Press and hold the Sleep/Wake button and the Home button at the
    same time for at least ten seconds, until the Apple logo appears.
    For more troubleshooting suggestions, see Appendix A, “Troubleshooting,” on
    page 132. "
    Page 132
    Reset iPhone settings. From the Home screen choose Settings > General > Reset
    Reset All Settings. All your preferences are reset, but your data and media aren’t
    deleted.
    If that doesn’t work, erase all content on iPhone. See “
    Resetting iPhone” on page 111.
    If that doesn’t work, restore the iPhone software. See “
    Updating and Restoring
    iPhone Software” on page 142. "
    http://manuals.info.apple.com/enUS/iPhone_UserGuide.pdf

  • My iphone won't power on. It just stopped working. What do I do?

    My Iphone won't power on. It just stopped working. It' been working fine with no porblems whatsover. Go figure. What do I do?

    I had this same issue today and my battery said it was 98% life. I only bought this iphone 5 exactly one month ago new, Wonder if the battery is already having issues this early. I charge it every evening and I have never gone in a single day below 73% battery life.

  • My iphone won't turn on after recent update

    My iphone won't turn on after recent update. How do I fix this?

    2 more options:
    Restore from backup
    Restore as new
    http://support.apple.com/kb/HT1414

  • Aluminium iMac won't power up after shutdown

    Hello All,
    I have bought a 20" aluminium iMac for my parents a couple of weeks ago. It went extremely well in the first few days, but I got the complaint from my parents that it cannot power up after the proper shutdown.
    It is very strange that it won't power up after it has been shutdown for a couple of hours, unless I unplug the power cord and plug it back in after a minute or so (reset the SMC)
    Oppositely, I can power it up normally right after it has been shut down for a few minutes. But never overnight.
    I have tried everything I know about like reset SMC and PRAM, as well as running apple diagnostic. Symptom still persist (though the diagnostic says nothing wrong with my hardware)
    Is there anyone facing the same problem as me ?
    Thanks
    Jimmy

    Thanks Guys.
    I haven't called Applecare yet. However, I have reinstall the system and done a software update EXCEPT the latest imac software update v1.1 released recently.
    See if anything good happen tomorrow and will let you guys know
    by the way, it's really great that Mac retains everything including the Apps and Desktop setting after the reinstallation......... nothing has to reinstall except the OS itself
    Jimmy

  • My iPhone won't power on

    My iphone won't power on.  Quit suddenly last night.  I have tried holding the sleep button and home button simultaneously for 30 seconds but that didn't work.  any other suggestions?

    take it back where you bought it, It should still be under warranty.

  • My iphone will not turn on after I replaced the battery

    My iphone will not turn on after I replaced the battery, itunes logo comes up, but it will not connect and does not reset! does anyone know what I can do?

    Who replaced the battery, you, Apple or an Authorized Apple Service Provider? If you did it yourself, then you could have done anything to disable it. It also voids any warranty and post-warranty support from Apple and the forum. You are on your own. If Apple or an Authorized Apple Service Provider replaced it, then take it back and have them check it.
    The iPhone does not have a user replaceable battery, or user serviceable parts. It is meant to only be serviced by Apple, or authorized service providers.

  • IPhone won't power on or show battery icon after discharge.

    My iPhone4 ran out of battery.  I plugged as soon as I could after it ran out (within 15 mins) and charged it overnight.  It won't power on this morning and does not show the charged battery icon on the screen.  The phone is only 4.5 months old and has never been left in a car or extreme heat.  I always let the bettery run down to <10% before charging and then charge back to full capacity.   I have tried holding down the home key and the sleep/wake buttons individually and together and nothing.  Any suggestions?

    Thanks for the help.  I had tried to connect it to the computer on my own and found out that my version of iTunes must  be too old to talk to my iPhone4.  I am still running 10.4.11 on my PowerBook G4 which uses an older version of iTunes.  I don't use the music feature on my phone to conserve my battery for Apps and other features I really like and leave the music to my Shuffle.  Guess I am really lucky it doesn't work as I would hate to loose my photos of my new grandson.  I need to find a quick way to send them to backup storage.
    When I disconnected after trying the computer and tried your suggestion of holding it until I saw the symbol, it finally worked.  Guess I did not hold them both together for long enough.  The battery only shows 31% even though it was on wall charger all night.  I will use it as is today and charge it overnight again to see if it gets a full charge.

  • IPhone won't turn on after brief blue screen.

    My iPhone is currently broken, won't turn on after a blue screen appeared briefly. Won't even connect to my PC or iTunes. Won't even charge with my charger or using a new charger from a family member. Won't hard reboot by holding home top button. Anyone know what my situation is? Checked over the internet and couldn't find any similiar situations. Also this occured after i was browsing Reddit so nothing intense was occuring on my phone at the time.

    I'm afraid you'll have to get it looked at by visiting an Apple Store or Authorized Service Provider next to your place or by contacting Apple:
    Apple - Support - Service Answer Center

  • Rand new iPhone 5s black, dead, won't power up after ios 7 upgrade...held down top button, held down home button...dead. Was fully charged, working fine tell said yes to upgrade. HELP!!!

    Brand new  iPhone 5s dead, black won't come on after ios update...is fully charged, was working fine till said yes to upgrade. Did not watch process beyond seeing Apple logo appear, left it alone, came back, dead. Tried holding top button, tried home button, nothing...HELP!!!

    If iTunes does not recognize your iPhone even if it’s plugged in, you may need to put it into DFU (Device Firmware Update) mode. If you have to put the device in DFU mode, you will most likely be unable to back it up.
    Hold Power button for 3 seconds and then the Power and Home together for 10 seconds (exactly).
    Release Power but keep holding home until the your iPhone shows up in iTunes.

Maybe you are looking for

  • Help on RV_INVOICE_CREATE

    Hi, I want to create an billing document of type F1(FKART). I must use the function module RV_INVOICE_CREATE to generate billing document. Here in my program am passing..... exporting parameter WITH_POSTING = 'B' & filling table parameter XKOMFK(MAND

  • Problem with my Ipod from Iphone

    Two days ago, i put in my Iphone some video files, all was good, i could see all files, all perfectly, but yesterday i dont know how, but i cant see no one of them, i know there are there all files because, the space of that video file are there, i d

  • Issue in query created on infoset - characterstic values are not displayed

    Hi, We have created a query based on an infoset(customized). In this query, values of only one object(sold-to-party) is not displayed. Where as for the same object, values are displayed in the other query created based on the respective ODS. note : Q

  • How to cope with Out of Memory Errors

    Hi, I am distributing a desktop application to the general public written in Java 1.4.2. How much memory is required is approximately propertional to how many files they load so Ive tried to pre-emtp OutOfMemoryErrors by checking when memory usage is

  • Button parameter mapping for tree tables (nw04)

    I've successfully implemented a table including a master column, which is bound to a context tree node. The table has property selectionMode: none Next to the master column I have a couple of columns, one containing a button. This button has property