Iphone won't show up in itunes after installing latest itunes update

I just installed the latest version of iTunes.  Now it won't recognize my iPhone 4.  It shows up as a camera on my computer (Windows XP Pro) but no matter what I do, I can't get iTunes to see the iPhone.  Any ideas?
thanks.

I'm not that familiar with Windows, but can you create another User account and run your Nexus Service software from there?
Dave M.
MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
Creator of 'Mac611 - Mobile Mac Support' (designed exclusively for an iPhone/iPod touch)

Similar Messages

  • Can not open itunes after installing latest version update 11.2

    Can not open itunes after installing latest version update 11.2

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • HT1386 after installing latest itune software,my ipod and outlook in my computer are not showing any calender items prier to one month

    After installing latest itune software in my computer, my ipod and outlook in my computer are not showing any calender items i added befor
    22nd december.Also not syncing with outlook, any calender items i have added in my ipod after 22nd january.I have selected all events to sync
    in my ipod.

    Thanks very much I have contacted them via this. Just hope they respond quickly- rather annoing! Greatly appreciated though

  • Problems to sync my computer calendar with my Iphone after installing latest Itunes download

    problems to sync my computer calendar with my Iphone after installing latest Itunes download

    When I connect my Iphone to the computer Ai have to sync automatically my outlook calendar. Never had any issues except with the latest download that tell is doing some sync over the air with ICloud and that I can go to my Iphone and change that. So far I have not been able to sync my Iphone calendar with my outlook calendar for tge whole week

  • After installing latest itunes on new PC unable to login to my account in iTunes Store

    Hi all,
    I get a new PC and wanted to use it with my apple devices.
    System is Windows 7 64 bit and, after installing latest iTunes I am not able to login to iTunes (needed to authorize my new PC and use it with my devices)
    Always get the message that iTunes Store is not available at the moment.
    For instance, I tried the diagnosys tool inside itunes and everything is ok.
    Please help me...
    Clemente

    There are a number of things you could do. One would be to network the two computers and transfer your iTunes folder from one to another. Here are a few links that may help you out:
    New PC & moving iTunes library
    Copying songs over a network to use with iTunes for Windows
    iTunes: Copying music between authorised computers with iTunes for Windows
    Another way would be to use an external hard drive, the guide for using the iPod as a hard drive is a good starting point. Apart from the sections on initially setting up the iPod, the instructions are the same for copying the iTunes folder to an actual external drive. If you substitute "external hard drive" for "iPod" the process is the same: How to use your iPod to move your music to a new computer

  • After installing latest iTunes I began having R6034 error messages, found and tried fox of removing 5 Apple programs and reinstalling iTunes.  Now iTunes says my library cannot be accessed because it was created with a newer version of iTunes.  HELP!

    After installing latest iTunes, I began getting R6034 Runtime Error messages, found fix of removing 5 Apple programs, reboot and reinstall iTunes.  Seemed to work but now getting error message that my iTunes Library (iTunes Library.itl) cannot be read because it was created with a newer version of iTunes.  Need Help!!!

    Try the following user tip:
    Empty/corrupt iTunes library after upgrade/crash

  • All applications in iWork fail to open after installing latest apple update. iMac running 10.6.8 Snow Leopard. Have tried reinstalling from iWork disc but no improvement. Help!

    All applications in iWork fail to open after installing latest apple update. iMac running 10.6.8 Snow Leopard. Have tried reinstalling from iWork disc but no improvement. Help!
    Error report as follows
    Process:         Pages [208]
    Path:            /Applications/iWork '09/Pages.app/Contents/MacOS/Pages
    Identifier:      com.apple.iWork.Pages
    Version:         4.1 (923)
    Build Info:      Pages-9230000~1
    Code Type:       X86 (Native)
    Parent Process:  launchd [93]
    Date/Time:       2012-08-22 12:33:15.909 +0100
    OS Version:      Mac OS X 10.6.8 (10K549)
    Report Version:  6
    Interval Since Last Report:          102101 sec
    Crashes Since Last Report:           11
    Per-App Interval Since Last Report:  2217715 sec
    Per-App Crashes Since Last Report:   4
    Anonymous UUID:                      1FA704D3-D5EF-4CE3-9813-42E4559157DC
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Crashed Thread:  0
    Dyld Error Message:
      Symbol not found: _SFAAutosaveUserActivityException
      Referenced from: /Applications/iWork '09/Pages.app/Contents/MacOS/Pages
      Expected in: /Library/Application Support/iWork '09/Frameworks/SFArchiving.framework/Versions/A/SFArchiving

    I'm having this issue as well only with a little different twist I guess. I'm transferring the iWorks applications from my Macbook Pro 3,1 with Lion to a new MBP 10,1 running Mountain Lion. I transferred the apps over using DropCopy since the older MBP doesn't have AirPlay. Applications show up but crash upon opening. This is the first install so there are no previous plist, versions or such to delete. All three crashed upon opening every time until I just had to have Keynote and purchased again - although Apple agreed to refund that purchase since my previous version quit working. Any ideas since I don't have any previous plist/versions to delete? Thanks in adavnce for any help you can offer.
    Process:         Pages [13521]
    Path:            /Applications/iWork '09/Pages.app/Contents/MacOS/Pages
    Identifier:      com.apple.iWork.Pages
    Version:         4.3 (1048)
    Build Info:      Pages-10480000~1
    Code Type:       X86 (Native)
    Parent Process:  launchd [153]
    User ID:         501
    Date/Time:       2013-03-11 14:57:02.175 -0400
    OS Version:      Mac OS X 10.8.2 (12C3103)
    Report Version:  10
    Crashed Thread:  0
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Application Specific Information:
    dyld: launch, loading dependent libraries
    Dyld Error Message:
      Library not loaded: @rpath/SFCompatibility.framework/Versions/A/SFCompatibility
      Referenced from: /Applications/iWork '09/Pages.app/Contents/MacOS/Pages
      Reason: image not found
    Binary Images:
        0x1000 -   0x354fe3  com.apple.iWork.Pages (4.3 - 1048) <3F2BE397-E81E-3355-C0DE-8B0F014E897B> /Applications/iWork '09/Pages.app/Contents/MacOS/Pages
      0x3ec000 -   0x46bff7  com.apple.iLifeMediaBrowser (2.7.2 - 546) <24A0A118-874B-3C7C-B50C-C80BED03A15F> /System/Library/PrivateFrameworks/iLifeMediaBrowser.framework/Versions/A/iLifeM ediaBrowser
    0x8fe3e000 - 0x8fe70e57  dyld (210.2.3) <23DBDBB1-1D21-342C-AC2A-0E55F27E6A1F> /usr/lib/dyld

  • Will not start even in safe boot after installing latest camera update

    MacBook Pro will not start even in safe boot after installing latest camera update.
    I started my machine and did a software update. Only the camera update needed. So installed and when required I pressed restart. It restarted and did install. Then restarted again. I expected to get to the login screen and it turned itself off. Tried three more times. Each time shutting off. I unplugged everything, and pressed start waiting for log in window. No it shutdown before the log in window. I then tried safe mode and that did not work either on three more occasions.

    I have managed to resolve some issues. I can now restart the machine via a CD boot. If I do cmd C into something like tech tool pro, then restart from that disks menu it restarts every time.
    If I try a safe start it shuts down. If I try a normal start it shuts down. I have managed to repair permissions and that cleared up some start up permissions but with no improvement to the boot problem. The only way to load is via the cmd-C boot option. Any other ideas?

  • After installing latest OS update I can no longer print from my iPad to my HP Officejet Pro 8600 printer.  Any suggestions?

    After installing latest OS 5.1 update I can no longer print to my HP Officejet Pro 8600 printer?   Suggestions?

    Installing the new os may have tricked one of the three devices involved.  If it used to work, it will again.
    Reboot the printer.   Reboot the router.  On the pad, general, reset, reset network connections. 
    Make sure all the devices are on the same wifi network.   Talk nice to it.

  • Iphone won't connect after installing latest itunes

    After installing the latest version of iTunes and plugging in my iphone I received the error message "Iphone cannot be used because the proper software is not installed." I've already tried removing and re-installing the program. Not sure what else I can try to get this working.  I'm running windows vista.

    Hi Neodoc,
    Welcome to the Apple Support Communities! I understand that your MacBook Pro will not boot past the Apple logo. There may be a few troubleshooting steps I would recommend for this situation. The following article outlines the steps to perform to get this resolved for you.
    Mac OS X: Gray screen appears during startup
    http://support.apple.com/kb/ts2570
    I hope this helps,   
    -Joe

  • Help, cd reader won't read cds after installing latest itunes upgrade.

    Just inserted a music cd (non-pirated) into my macbook but it keeps getting auto-ejected.  Tried this with several music cds.  This issue only cropped up AFTER installing the latest iTunes update on 11 June 2011. 

    Hi, and welcome to Apple Support Communities.
    You could try going to System Preferences > Accounts and create a new account to see if the problem also occurs in a new account. If so, it would point to a hardware problem with the optical drive.

  • HT1926 Problems synchronizing iPod touch after installing latest iTunes update

    After having installed the latest iTunes update I can't sync my iPod touch with iTunes anymore. Error message reads: Attempting to copy to the disk "Acer" failed. The device is not connected." I already re-installed iTunes completely. Another error message says: "iTunes could not back up the iPod because the iPod is disconnected". But the iPod was connected. What can I do?

    Temporarily disable any security software on the computer.

  • Problems after installing latest itunes

    I installed the latest itunes 9.0.1 the other day, since then my ipod nano ,3rd gen, wont sync, a message comes up when you plug it in saying 'new hardware found, there was a problem with installation and may not load properly' then continues to do nothing. when i plug in my sisters ipod 6ogb 5th gen on her itunes it says 'ipod service module (32 bit) has encountered a problem and needs to close'.
    tried resetting the ipods but that didnt helpnot a computer wizz so need help in simple terms please!!

    (default) REG_SZ (VALUE NOT SET)
    APPLE APPLICATION REG_SZ =JJ*5.q6R9m~e?-X$O^7!5sPG*i7c9a%EIdQdnl&dib_....
    CRT-winSXS REG_SZ _i0Y]s!soe8MkbIdFwUv$f.Z@}4G(*9MkbIdFwUv$f.Z....
    Good job, Natters. On doing the same search through my own registry I find the same results and my Device manager *isn't* blank. So I'm not so inclined to think it's the SP3 problem anymore. Again.
    So the other thing that I would be worried about is a malware infection. *Apropos* adware can cause a blank Device Manager, although other similar varieties may also cause similar problems.
    In order to get that possibility off the table, I think you should try heading to a reputable Malware removal help forum where somewhere can have a good look through a HiJackThis log of your PC, and can advise you how to fix any problems that show up. There's a list of reputable malware help forums at the bottom of the following page (although there are others out there):
    http://www.doxdesk.com/parasite/links.html
    (Not trying to get rid of you, just trying to get you on the radar screens of people with the right set of skills.)

  • PC completely crashed after installing latest iTunes update-coincidence?

    I downloaded and installed the latest iTunes upgrade yesterday. After doing so it asked me to restart my PC which I did. However, my PC would not then start, I get a black screen with the message:- "windows could not start because the following file is missing or corrupt - \windows\system32\config\system "
    I have tried rebooting from the "last known good configuration" in "safe mode" and have also tried restoring the system with the cdrom that came with the PC.
    Is this problem connected to the iTunes download or is it just a coincidence that my PC has crashed immediately after this?? It seems very starnge as I have never had any problems like this before. I am now using my work laptop to post this message as my home PC seems to be completely kaput.
    Has anyone any advice or has anyone suffered the same problem?

    This error is often due to a corrupted registry. I am afraid I can not help you myself, but this Miscrosoft article seems to cover it:
    http://support.microsoft.com/kb/307545
    If you google: missing corrupt \windows\system32\config\system
    you will find quite a few other hits about the problem.
    PS I noticed that the Microsoft method does not aply if you have an OEM installed Windows:
    +Warning Do not use the procedure that is described in this article if your computer has an OEM-installed operating system. The system hive on OEM installations creates passwords and user accounts that did not exist previously. If you use the procedure that is described in this article, you may not be able to log back into the recovery console to restore the original registry hives.+
    Message was edited by: polydorus

  • TS1967 Having trouble after installing latest iTunes

    I have tried to install the latest itunes on windows xp, but keep getting this answer when I try to run it "This application has failed to start because dbghelp.dll was found. iTunes was not installed correctly. reinstall iTunes. Error 7 (Window 126)"

    Sorry about that, this should read as,
    I have tried to install the latest itunes on windows xp, but keep getting this answer when I try to run it "This application has failed to start because dbghelp.dll was not found. iTunes was not installed correctly. reinstall iTunes. Error 7 (Window 126)"
    Many thanks for your input
    Talking ainz

Maybe you are looking for

  • File Adapter - File Content Conversion to XML last element missing

    I'm using the SAP File Adapter with File Content Conversion to convert | (pipe) delimited records into XML. When the last field is blank, I would expect that an empty node gets created, however, the node doesn't get created at all. For example given

  • BPM Exception errors

    Hi Experts, I am trying to activate my BPM. I have used exception handlers and when i try to activate my BPM, I get either a warning/information which says (!)Exceptions will never be caught system exceptions will never be thrown Has anyone faced suc

  • Set time automatically suddenly 5h 56min slow

    This is bizarre and AT&T was not able to help. Two days when traveling by car from Minneapolis to Fargo (same time zones) my iPhone 4 phone suddenly began to display a time that was 5 hours and 54 minutes in the past. What is strange is that one of m

  • Size/Angle Jittering and Scattering with a "brush tip" in full color?

    Is there any way to emulate the options available for a custom brush tip created from an image, yet still keep all the color information? I know this can't be done with a regular brush tip, but is there another way to pull it off other than copy/past

  • OS X quit Unexpectedly (kernel Panic)

    Okay, I got this iBook G4 for my wife for Christmas. She has loved working on it immensely. But now we're getting these kernel panics, and I wanted to see if someone can possibly give me a clue as to where the problem may be. Below is the entire cont