Iphone won't turn on after resetting

hi does anyone know what happened after i restarting my iphone? i did the erase all contents and settings but after an hour or so it just turned on and off, on and off.. i thought it was part of the erasing process.. so i left it till morning.. and in the morning i found out it still the same.. help me if anyone know how to solve it.. thankssss..

Put the phone into recovery mode while connected to the computer and itunes on (hold the power and home buttons until you see a cable and itunes logo) then run the restore firmware function and your phone should return to factory settings.

Similar Messages

  • My iphone won't turn on after recent update

    My iphone won't turn on after recent update. How do I fix this?

    2 more options:
    Restore from backup
    Restore as new
    http://support.apple.com/kb/HT1414

  • IPhone won't turn on after brief blue screen.

    My iPhone is currently broken, won't turn on after a blue screen appeared briefly. Won't even connect to my PC or iTunes. Won't even charge with my charger or using a new charger from a family member. Won't hard reboot by holding home top button. Anyone know what my situation is? Checked over the internet and couldn't find any similiar situations. Also this occured after i was browsing Reddit so nothing intense was occuring on my phone at the time.

    I'm afraid you'll have to get it looked at by visiting an Apple Store or Authorized Service Provider next to your place or by contacting Apple:
    Apple - Support - Service Answer Center

  • IPhone won't turn on after attempting to restore!

    My iPhone will not turn on after trying to restore it it starts to boot up fine then it goes back to the black screen and it keeps doing this please help!

    Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost).

  • IPhone won't turn on after trying to restore to beta version.

    I was trying to restore my iPhone to the latest beta version and during the restore, an error occurred and my iPhone won't turn on, and iTunes does not recognize it anymore. Now, when i try to turn it on, the logo appears and then appears the "connect to iTunes" image and IMMEDIATELY the screen turns white and Apple's logo appears again and starts all over again.

    If you're a registered developer, you have access to the developers forums. iOS 5 beta can NOT be discussed in the public forums. If you're not a developer, bummer... you shouldn't have installed a stolen beta on your phone, should ya?

  • TS1538 iPod touch won't turn on after resetting

    I started by resetting my iPod touch 3rd generation, and now it won't turn on at all. I've let it charge and have tried literally everything I can find on the internet,, but nothing has got it to turn back on. Someone PLEASE help me...

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • Nano (4th gen) won't turn on after reseting and I need itunes support

    A couple of weeks ago, my family computer crashed when we were trying to install a sercurity program. The computer company sent us a disk to bring the computer back to its original state. (This was supposed to make the computer be like it just came from the factory when we first got it) The disks didn't work and we sent it to a local computer repair center where they fix stuff like this.
    So anyways, now that the computer is back to when we first got it, I'm afraid that if I downlaod itunes, sign into my account, and plug my ipod into the computer that all my songs and PURCHASED songs will disappear and I will be out more than $200.
    Now it's Oct. 30th and my ipod will not come out of sleep for anything. I've tried all of the things they offer on Apple's support webpage. I plugged it into my wall adapter and it's making a funny buzzing noise.
    Please help me with these 2 issues I'm having.
    Thanks so much.

    My 4th Gen iPod Nano won't turn on once it is off the USB cable. If it is connected to the iMac (iTunes 10.1 (54)) it works perfectly well (synchronizes, plays music). Have tried to reset it (holding the Menu and Center buttons) and to reset it to its original settings (current SW version is 1.0.4) and it still wont work.
    Any suggestions?

  • IPhone won't turn on after replacing LCD and Screen

    My dad replaced the glass digitizer and LCD panel the screen won't turn on. what could go wrong that would cause this?
    I plugged in into the wall charger and it made the charging sound but still the screen didn't turn on. The sound works and vibrator also. I held the home and power button and nothing happened. I took a snapshot and I heard the picture sound. I also hooked it up to my computer and iTunes synced it but still the screen did not turn on. What could I do to make my screen show and be able to use my phone again? Please Help!! Thanks in advance !

    As deggie poined out, it could be any number of things. If your dad can't fix it, you may need to find a competent repair shop or buy a new phone. Apple will not service that one.

  • IPhone won't turn on after update

    I tried to do an update on my iPhone4 and now the phone won't turn back on and iTunes isn't saying that it's in recovery mode.

    I have already tried that, and it just comes back to the screeen that says I need to connect to iTunes, which I am.

  • Has anyone encountered their iphone won't turn on after installing the 8.1.3 update?

    Has anyone else encountered this problem?  The update took about 15 minutes.  After the update the phone wouldn't turn back on. I hit the power button and a the iTunes logo appeared with a lightening cord, so i plugged into my pc to iTunes.  iTunes had a pop up telling me that I needed to restore the phone back to factory settings and I would lose all my data that isn't on icloud.  Before I hit restore, are there any other things that I should try?  I already tried hitting update again and it won't complete the update.

    The message is correct. Once you see the iTunes logo and the USB cord your iPhone must be restored. It has already lost all data stored on it. You can recover your data from a recent backup if you have one. You can recover all purchased music and apps without the backup. When I updated our 2 iPhones, I backed each of them up to iTunes before updating just in case. I recommend that you do this before you do any future updates.

  • IPhone won't turn on after a non-iTunes iOS6 update

    Hi Fora! I just updated my iPhone 4S to iOS6 yesterday via an update message I got on my iPhone. The update went overnight while I was sleeping, and when I woke up my iPhone was off. I tried to turn it on and just get the black screen with the apple logo on it, and it just stays there. Whatever I press next the iPhone restarts and I get no further. I tried to do a hard-reset on it via iTunes, however when it's about to finish I get the error message that the recovery prosses has failed.

    Hey,
    I've got the exact same issue with my new iPhone 4S. Updated using the on-screen prompt. I plugged in my 4S into the laptop to finish everything off and I get a message statng my phone needs to be restored to factory settings in order to update the OS. I do that, and now my mac is downloading iOS6 (strange when I thought my 4S had already done that), starts installing (or extracting) the update, and then I get the prompt that the update is not compatible with my current model. Now, if I try to turn on my 4S it simply stays on the Apple logo, first it's bright, then it dims down a bit and after a few minutes the phone switches off. Hard resets, trying to sync it with iTunes, nothing works, it just stays on the logo and nothing happens. Very frustrating and I've tried all the reset/restore tips provided and nothing works! Anyone know what is causing this or what can be done to fix it or do i just have to go in and get my handset replaced?
    Thanks.

  • Iphone won't turn on after a failed update

    i have a brand new 5s its not even a year old, in a life proof case so its as good as new!
    i had installed the iOS 8.01 and it was working fine, tonight i decided to install 8.02 and my phone is completely unresponsive
    The upgrade failed to install and now my iPhone keeps turning off and back on..
    but only to the APPLE screen and then it goes bright blue for a quick second and turns off completely.
    and then starts doing that over and over again!
    Naturally i thought id try hooking it up to my Mac but iTunes can't even detect my phone since its not completely ON...
    PLEASE HELP

    Hi val0891,
    Thank you for using Apple Support Communities.
    To help resolve this issue I'd like you to please put your device into recovery mode, and restore it using iTunes.  After restoring, you can then restore from your backup.
    If you can't update or restore your iPhone, iPad, or iPod touch
    Take care,
    Alex H.

  • IPhone won't turn on after software update

    Last night I went to update my iPhone 4S to the latest iOS 7. I went to sleep while it was updating and it was charging and when I woke up it wasn't on and it kept vibrating every few seconds when it was charging. I tried to turn it on, then I tried to restart it and held the home and sleep buttons for 20 seconds. I tried connecting it to iTunes and iTunes won't detect a device. Any help??

    I tried to restart it and held the home and sleep buttons for 20 seconds.
    Try it this way ...
    Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, then swipe the slider to power off.
    Then press and hold the Sleep/Wake button until the Apple logo appears.

  • IMac won't turn on after resetting SMC

    Recently my 2011 iMac starts uttering strange noise even if the fan speed is low so I decided to reset SMC this morning. However, after unplugging for 15 sec and plug again. it just won't start! No matter how I pressed the power button, there is no reaction coming from my iMac. I tried to long press for 10 more seconds, re-unplug and plug in, and tried another socket on the wall but in vain. Do you have other ideas 'cause I have not backup my data and hope to grab something output before sending it to the APPLE store. Thanks.

    If you get no video or audio at all and you have confirmed it's not the power source or power cord then that indicates your power supply may have failed.

  • Iphone won't turn on After blue screen of death, even after press sleep and home buttons simultaneously.

    I was watching YouTube on my iPhone 5 and all the sudden the screen turned blue and phone stop responding to any buttons. I some how pressed the volume buttons and power button and the phone went off but since then it can't turn back on. I tried to press the power and home button simultaneously but still nothing. After that I removed the case from my phone and noticed there was moisture on the back of the phone, I didn't drop the phone in water. Any suggestion how to turn on this piece of crap. Thanks!

    hopefully they'll have your iphone in stock!!! if they do, they should just replace the phone.

Maybe you are looking for

  • Can the Apple Universal dock

    Can the Apple Universal dock & remote work with the iPod nano 7th generation?  Especially to connect to a powered speaker in my home stereo system?  Will the new Lightning to 30 pin adapter be required & will it work in the Universal dock?

  • TIN Creation algorithms in Oracle 11g

    In the Oracle 11g Developers Guide http://download.oracle.com/docs/cd/B28359_01/appdev.111/b28400/sdo_intro.htm#sthref99 it mentions that "Oracle TIN generation software uses the Delaunay triangulation algorithm, but it is not required that TIN data

  • CLASSPATH, Jar file or zip file visibility during compilation and  run time

    I am using jwsdp-1_0_01 with some success. However, making my *.jar or *.zip files visible during ant builds is not working. Setting a CLASSPATH environment variable (BTW: I on a Linux box) seems to have no effect. I'm using the ant build machinery f

  • After installation of OS X 10.8, Mac still restarts in OS X 10.7.

    So i installed OS X 10.8 in order to upgrade my MBP 2011 from OS X 10.7.  Installation completed, aparently.  Then the installer asked to restart the system.  So i did.  Then it just restarts into to same old 10.7 Lion like nothing ever changed.  No

  • With IOS 8.0 on iPhone 4s calendar does not working properly

    Hello, after installing IOS 8.0 on iPhone 4s calendar does not working properly (is suspended). Could anyone advise ? Thank you in advance, Daniel