Iphone wont shuffle when connected via ipod connector in hyundai sonata

It only plays the songs in alphabetical order. Yes i press shuffle at the top of the list of songs before plugging it in.

Update
I guess that it just had a bad connecting port on the phone itself, no clue why it wouldn't work when plugged in both ways other than there is actually some differentiating between the two sides.

Similar Messages

Iphone 4S - Windows Vista - 64 Bit (and photoshop elements 9.0) is not recognizing my iphone as a camera - therefore I cannot download pictures from my iphone. iTunes works fine with the iPhone, but I do not see it in "My Computer" when connected via USB

iphone 4S - Windows Vista - 64 Bit (and photoshop elements 9.0) is not recognizing my iphone as a camera - therefore I cannot download pictures from my iphone. iTunes works fine with the iPhone, but I do not see it in "My Computer" when connected via USB. I already tried uninstalling and reinstalling iTunes....still nothing. Any ideas?

Thank u verrrrrrrrrrry much FoxFifth u save my life thank u.

TS3694 Downloaded latest IOS 7.0.2 and it crashed my iphone 4. Now Ive got nothing and it wont restore when connected with Itunes cos Error Message 4005 comes up. Cant find it listed anywhere. Help

Downloaded latest IOS 7.0.2 and it crashed my iphone 4. Now Ive got nothing and it wont restore when connected with Itunes cos Error Message 4005 comes up. Cant find it listed anywhere. Help

Hi!
It looks like there might be some security settings or software on your laptop that's preventing the restore process from working.
Check out this article in Apple's support. It shows you the steps you can take to try to get around error 1611.
Like diesel vdub said, a DFU-mode restore might give you success where a regular restore might not, so maybe you can try that.
What you need to do is put your phone into DFU mode, which is a low-level mode that helps the restore process get a little more done, or it can help iTunes get around certain roadblocks (hopefully like the one you're experiencing!). Your computer will install special DFU-iPhone drivers for it, and then iTunes will see it as a phone that needs restoring.
To get your phone into DFU mode:
Plug your phone into your laptop.
Turn the phone off.
Press and hold the power/lock button. Keep it held in, even after the display turns on and you see something on the screen. As soon as you see something on the screen, start holding the home button as well as the power button, so that they're being pressed together.
Keep both buttons pressed down for 10 seconds.
After 10 seconds, release the power button, but keep holding home until the laptop sees a new USB device. Once you see that, you're in DFU mode, and you can let go of buttons. Your iPhone screen will be blank during it all, even though it's actually on, in DFU mode.
Now your restore should work!
If your phone shows the Apple logo or anything else while you're trying to get it into DFU mode, then something went wrong. Try the steps again. If it suddenly starts up normally again, try reducing the time to a bit less than 10 seconds--try reducing it by about a second at a time. It should work!

My new computer with Windows 8.1 does not recognize my iPhone when connected via USB.

My new Dell Computer with Windows 8.1 does not recognize my iPhone 5 when connected via USB. I have reinstalled iTunes to no avail.

Hey, I may have to if I can't get this one to work!!
I have tried a different USB to no avail. Both cables work on my old Dell so I don't believe they are the issue.
I uninstalled iTunes as directed by Apple Support and reinstalled. Apparently, Apple Mobile Device Support is not loading with it because it does not show up in programs.

Ipad wont charge when connected to laptop but charges when connected to wall outlet

ipad wont charge when connected to laptop but charges when connected to wall outlet

The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Best Practices for iPad Battery Charging
http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

The iTune Remote App has stopped finding my iTunes library when connected to wifi from my main router, but works fine when connected via second wifi router on the same network (different SSID)

I'm running iTunes Remote App from a couple of iPhone 5's and a first generation iPod Touch. iTunes is running on a PC - Windows 7. My home network runs two Wifi Routers, each with a different SSID. I've had no problems with the Remote app running this set up for the last 8 months but recently the App can only find my iTunes library when the iPhone/iPod is connected via one specific router, when connected to the network via the other router, no iTunes library is found. I'm also running an Apple TV and it's the same as the iTunes Library, only visible via the one SSID.
Everything else seems to work fine when connected via either router, eg Internet on the iPhones (definitely via wifi)
I've tried renewing the lease on the iPhone wifi connection, restarting everything.....several times.....
It used to work fine, this only seems to have been a problem in recent weeks
Any help or advice would be much appreciated
Thanks
Ian

It turned out to be the firewall settings on our router. Her machine was sending traffic that our router interpreted as a DoS attack and blacklisted her Airport's MAC address. That's why it would work fine if she switched to Ethernet.

My ipad wont charged when connected to laptop. HELP?!!!

my ipad wont charged when connected to my laptop. Anyone know how to fix that. thanks, much appreciated
Also, just noticed this now....i have it connected and its got no battery. It will shut off like it died (while connected to the laptop) and then after a few minuted it will turn on. with the battery icon saying "not charging"

Chances are your USB port is charging but only when the screen is off. This is e behaviour i get from our pcs.
Make a note of the battery level, plug it in and make sure the screen is off, after and hour check the battery level.
It should have charged a bit but very, VERY slowly.
Your computer port normally only delivers 500mha of power. Some modern macs deliver 1100mha. Anything less than 1000mha wont charge with the screen in.
The iPhone charge delivers 1000mha and the iPad charger delivers 2100mha.
So it not charging via the computer is normal.

Does anyone Know how to fix error 0xe8000065 when connecting the ipod touch 4g

does anyone Know how to fix error 0xe8000065 when connecting the ipod touch 4g

See:
iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting

10.6.1: Can't resolve FQDN when connecting via WLAN / Airport Base Station

Hi everybody,
after hours of work and having read many helpful topics in this forum (and other) I've successfully setup a Single Signon Environment for my home office. It's a dual core macmini server running 10.6.1 and only mac clients.
The server is connected via switch to my airport extreme base station. This airport station uses PPPoE to connect to my ISP and it has the DHCP service running, handing out the clients' IP addresses. The server and the switch have all static IP addresses.
My issue is the following:
Whenever I connect via wifi or vpn using my MBP, I am not able to "bind" to the server (via system preferences : users : login setting) using the FQDN. The error is "can't resolve address. -2200" Instead it only finds myserver.local - and then I am able to set up my wifi connected client.
However, when I set up the client with the .local address I am unable to get a kerberos ticket for my users. The ticket viewer says, that it can't resolve the address for myserver.mycompany.private
I was able to get afp or ical to work on my vpn or airport connected clients when I used the server's IP address instead of a domain name - but only with kerberos turned off and with other problems.
I've heard that if everything is configured right, the server should show up in every clients' sidebar with its FQDN and NOT the bonjour name. Right now it shows only the bonjour name - even on the clients connected via Ethernet.
The other strange thing is that when I log into my client system I still have to authenticate with ticket viewer in order to get my kerberos ticket. Usually Single Signon should work with the login window, right?
I really don't know what else to do. I double checked my DNS settings and everything seems ok. I entered the FQDN of the my server in the airport stations' DHCP settings as "LDAP server" - nothing changed...
Do I need to use the server's DHCP service instead of the airport station's DHCP? And if I do this, how to I turn off airport's DHCP? It does not seem to be possible when connected via PPPoE to my ISP.
I am unsure what to do in order to get things to work. Anybody out there who can help?

Hi Davidh and thanks for posting!
I had 3 DNS entries in my client's network settings - one was the server and the other 2 were from my ISP. Removing the ISP's DNS entries and keeping the server DNS IP solved my kerberos issue. Wow!
I'd never thought that it won't work with more than the server given as DNS entries. I'll need to check this with my iPhone later, because I had a similar issue with that device yesterday when trying to connect via VPN.
Thanks very much!
Still one question:
The sidebar of my clients still don't show the server's FQDN - but only its bonjour name. Is this right? I read in another forum that the client's sidebar should show the FQDN if everything is configured right.

Apple TV (1G) doesn't appear in devices list when connected via ethernet

After upgrading to OS X Lion and iTunes 10.4 my Apple TV (1G) doesn't appear in the devices list when connected via ethernet. When I switch to wireless lan the device is shown and the sync process starts but can't copy the new films. The copy operation stops every time and sometines the device disappears from the list.
Despite of the upgrading of OS X and iTunes all the settings are unchanged.
Anyone an idea?

Since my last update, I've gathered more information. I'm almost certain this is not entirely a 10.7.1 issue, if an issue in 10.7.1 at all. 10.7.1 may have changed something that caused this issue to appear,but where I was having this problem weekly if not daily, I no longer have the problem. I changed routers. I was using a new D-Link Xtreme N Gigabit RouterDIR-655. This router was causing me pain with lock ups. I replaced it with a Cisco Linksys E4200. I have not had a lockup in over 2 months now and not one sync issue with Apple TV nor my new iPhones, which sync wireless to iTunes on my Mac Pro.
Thinking about how my network is wired leads me to believe the issue was in the router, or maybe a network communication change in 10.7.1 that the DIR-655 was not supporting correctly. My MacPro and a few other hardwired access points in my house go directly to the router. My AppleTV and Airport Extreme are connected to a Gigabit switch and the Gigabit switch is then connected to the router. I also turn off the wireless capabilities in my routers, as I prefer to let my Airport Extreme handle those duties. This all means my normal hardwired communication path from my Mac Pro to Apple TV was going through the router, to the switch, to the Airport Extreme and then to my AppleTV. My Apple TV is connected to the LAN port on the Airport extreme. By going wireless on the MacPro, I was bypassing the router altogether.
As I started out saying, since I replaced my router, my sync issues have also gone away. If your having Apple TV sync issues, you might want to look at the router as well. Also, while I can’t remember the exact settings, I had opened up or enabled UPnP and other router settings in the DIR-655 to see if that would resolve the sync issues and it did not. In the end, I just spent the money and bought a new router and life is good now.

Itunes freezes when connect my ipod

When connect My ipod Classic to itunes, itunes freezes and when disconect the ipod, itunes restabilized. I try uninstall all apple software in my pc, but no work. This problem continue in others computers
Sorry for my english, i speak spanish... HELP
EDIT: Ah! When connect mi iPhone is work correct, the problem is con my iPod. It's work perfect in hard disk mode, not know

Similar problem here:
When I'm playing songs with iTunes and connecting my 3G 20GB iPod, my computer will hang up completely - screen goes dark and I have to reset my PC.
However, when my iTunes is "idle", i.e. not playing a song or doing anything else, connecting and syncing the iPod will work just fine.
I'm using the newest (6.x) Version of iTunes on WinXP SP2 with a 3G iPod 20GB.
Martin

When connecting an iPod touch 4g to an accessory (car radio) can be heard crackling (cliping)

When connecting an iPod touch 4g to an accessory (car radio) can be heard crackling (cliping), as if listening to an old record, but via headphones everything is ok. So where is the problem?

All I can suggest are the standard fixes:
- Reset the car system/contact the manufacturer
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

My iphone wont let me connect to my wifi it just keeps saying 'activation server is temporarily unavailable' what do i do?

My iphone wont let me connect to my wifi it just keeps saying 'activation server is temporarily unavailable' what do i do?

Ask him. In any case, if it was jailbroken, you cannot get help here for jailbroken phones. Sorry.

How can I transfer photos from LG phone to mac notebook. Phone appears in iPhoto when connected via USB but selection for download shows 0 photos

How can I transfer photos from LG phone to mac notebook. Phone appears in iPhoto when connected via USB but selection for download shows 0 photos

Just open your LG volume up likes its an external HD and drag all photos onto a folder in your macbook Air.

Mac pro does not recognize ipad device when connected via usb port, suggestions?

mac pro running os 10.6.8 does not recognize ipad device when connected via usb port, suggestions? itunes 10.7

Here's a troubleshooting assistant: http://www.apple.com/support/ipad/assistant/itunes/
The most likely issue: Have you plugged your iPad into a USB port that is not directly part of your MacBook Pro?

Iphone wont shuffle when connected via ipod connector in hyundai sonata

Similar Messages

Maybe you are looking for