Iphone wont work in car?

I have a Kenwood deck and i have the ipod adapter for it, but when i plug the phone into it i get a message saying that its not supported and asks if i would like it in airplane mode. No music will play but it will charge any ideas?

Who would fix it? If it doesn't work for the iPhone it means it wasn't made forit...cannot change how it is made. There are differences between the iPods and iPhones and the maker of the cable/connector has to know and design for it.

Similar Messages

  • My iphone wont work - computer text above the apple

    My iphone wont work - when I charge it I get the apple sign but it has computer language above it.  Its not recongised in itunes so I cannot reinstall the software.
    Any ideas

    Probably a hardware failure. Make an appointment at an Apple store and bring it in to be evaluated.
    ~Lyssa

  • HT5622 imessage on my iphone wont work

    my imessage wont work using my apple id, but i can log into my account no problem.
    not recieving any message from other iphone user but can send them message.

    Hi holte7,
    If you are having trouble using iMessage, this article contains relevant troubleshooting steps:
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/ts2755
    If the trouble is actually with activating iMessage, this article would apply:
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/ts4268
    Take care,
    - Ari

  • My american iphone wont work in norway

    Hi I have a problem with my iphone, because it wont work in norway after Ive been using it in America for 9 months now.
    the carrier I use in Norway is Telenor, and I know its something about the unlock, but can I get a straight forward answer on what I have to do to get this to work?
    people all around the network keep walking around the point, and I just dont get it, and it keeps annoying me!
    Anyone please?

    AT&T is the carrier for Puerto Rico. Your phone is locked to AT&T. Contact them:
    http://www.att.com/esupport/article.jsp?sid=KB414532&cv=820#fbid=Ont7guWFCdY

  • My iphone wont work help please

    my iphone is frozen at the apple logo and it wont work and turn on or i tried restoring it but it wont work can apple help me please?

    What, exactly, happens when you try to restore it?

  • Hi. My iPhone4 won't turn on unless it is in the charger. But when its in the charger it will not charge. If I take out the charger my iphone wont work.

    I just want my phone to work and I do not understand why it wont charge and why it wont work without the charger.

    Hi tbolibruch,
    Thank you for using Apple Support Communities.
    In order to troubleshoot this issue where your iPhone will not power on without the charger, please follow the steps below.
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    iPhone: Hardware troubleshooting
    Cheers,
    Alex H.

  • Hi there iv turned my old iphone on as my new one has gone to be repaired and i typed in the password to many times as i cant remember it and now its disabled and i have got a new laptop due to other one been broken and my iphone wont work with itunes

    hi there can anyone help me. i have gone back to my iphone as my other is in repair and i tried the passcode to many times and its now disabled and says connect to itunes however it says online that you need to connect it to the laptop you synced your phone with last however i have a new laptop and iv installed itunes and my iphone wont connect so how do i enable it so i can use it again.

    iCloud backups do not have seperate passwords, it is merely the password to the Apple ID.
    If attempting to restore via iTunes on a computer and the system prompts for a passwod to restore, there are two possible options:
    1) The user enabled backup encryption.  If so, enter the password.  There is no way to reset or remove this password.
    2) The backup is corrupt.  If the user never selected backup encryption and the backup is asking for a password, the backup is corrupt.  Delete the backup and restore as new.
    Relying on PhotoStream for storing all your pictures taken with the device is extremely unintelligent.  Old pictures roll off of PhotoStream after 30 days or 1000 pictures, whichever occurs first.

  • Please Help My iPhone wont work

    My iPhone isnt working. I turned it off last night but then when i got up this morning i hit the power on button and all it shows know is the whit apple logo in the middle of the iphone. But i need to get it back on. I have important apps on there for my buisness. I have an black iPhone 4S 32 GB. Please help

    use this article to help http://support.apple.com/kb/ts3281

  • Ive tried to update my iphone by using wifi but the wifi connection got interupted and not my iphone wont work

    Ive tried to update my iphone by using wifi but the wifi connection got interupted and not my iphone wont work

    Connect your iPhone to a computer and use iTunes to perform the update.
    ~Lyssa

  • IPhone 4s bluetooth wont work with car

    My Blackberry bold and iPhone 4 were absolutely fine with 3 different cars. I have just upgraded to the iPhone 4s and now the phone connects to the bluetooth but doesnt work properly. It rings and the screen shows that there is a call there, it even turns the radio off but the voice is coming out of the hadset. In previous versions i think you could select Audio Device 'in call' but you cant on the 4s. I have tried it in an Audi, a new Volvo and a BMW so i think that the car kits should be fairly up to date. Please help as i do lots of work miles during the day when on the phone.

    i would try turning the bluetooth off and reconnect it and if that does not work reset your phone for it may be something wrong with it. if nothing else works you may have to bring it to the apple store, becuase the 4s you may have may have a bad bluetooth connector. hopes this helps

  • My iphone wont work after i updated it

    I Updated my iphone 5 last night to ios7.1 not it wont start, also with my macbook pro after updating and restarted now it wint start and work oroperly, what is happemning???????

    i have the same problem. I'm looking forward to possible solutions

  • My power button on my iphone wont work

    Three days ago I was in the car coming home from camp and my power button began to not work well.  I would have to press it a lot harder then i usually would.  So i just stopped using it in general, to see if it would start working again.  I tried to use it today and it had stopped working completely, I dont know what to do!!  I'd like it to work:/

    Hi there,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    -Griff W

  • HT4623 i updated my 3gs to ios 6 and now my iphone wont work at all

    updated the software and it worked for a few hours and then it reset and said i had to restore my phone but it wont restore it says error every time.

    hi i need your help, im having problem also with 3gs, ive updated from 5.1.1 to 6.0 but itunes ask me to restore which i did, but now my iphone stuck in the configuration like asking for language, country etc. i cant even activated it and also it says no service. in itunes it says no sim card to activate the update.PLEASE HELP ME

  • Iphone wont work at all since upgrading to new version of itunes (10.2.1)

    Ever since upgrading to the new version of itunes 10.2.1 my iphone will not work at all, it will not switch off and will not restore which itunes tells me is needed, cannot use phone at all, need help please.

    I only have songs no other media. The specs for my Ipod say it should hold 7500 songs. This problem only started after upgrading to the newest version of iTunes 10.2.1.1

  • Iphone not working with car headunit

    I have a JVC KW-NX7000 installed in my 2004 Subaru WRX wagon. I must say the head unit is amazing, i love it! I just recently bought a Iphone 3g. I read all the info about both the head unit and phone and then bought a JVC KS-U30 audio/video cable.
    I can not get the head unit to see the phone. Just keeps telling me no USB device but will charge the iphone. Thought it might be the cable or head unit so tryed a friends ipod touch. That worked perfict. Tryed another friends iphone 3g also with no luck. I have the AV setting on the head unit set to Ipod, is there another setting i am missing-maby one on the phone? Any help would be much appriciated.

    I have a simmilar problem, i have a JVC KD-R606 head unit and seem to have connection issues first thing in the morning or when it's a bit cold it just will not connect, also when i do get it to connect the audio switches over to the Stereo bluetooth connection from the dock connector after about 20 seconds and then have to manually go through the iphone to change the output source to the dock connector, it still works ok when a phone call comes in it switches to the bluetooth automatically and back to the dock connector again, it's getting a bit annoying when it's connecting for the first time and keeps switching speaker source.

Maybe you are looking for

  • 10gR2 on Windows XP Pro SP2

    Can anybody help: I just installed Oracle 10g Release 2 on Windows XP Pro SP2 and receive the following message when starting the Enterprise Manager: DBD Error: OCIServer Attach. Via SQLPlus I can work and the Instance is running. I would appreciate

  • Writing data in text file..

    1. check the file name in D:\\temp\\test.txt 2. if it exists, then open file. if there is data, then read data. after the last record, it writes new data. 3. if it does not exist, create text.txt file and write data into text.txt file. so far, I have

  • Import Images into slide show - Creating Thumbnail images -Hang

    I am using iDVD 7. I imported my images into a slideshow. The pictures were not in iPhoto but just a folder that I created and edited in Photoshop. Once I import the images, the window shows all the file names as expected but all the Image Thumbnails

  • Activation problems with Apple TV 3 rd gen and the latest version of YouTube for Apple TV

    Since the latest version of YouTube for Apple TV you need to connect your iPhone Youtube account to your Apple TV for Youtube to use a personal account. It does this through youtube.com/activate. I have two Apple TV and have implemented the process t

  • Eax doesn't work with Colin Mcrae 04,05 on Audig

    Hi there?I have an Audigy 4 card with all the latest drivers installed. When I try to play Colin McRae Rally ( both 04 and 05) I cannot select the EAX 4.0 option in either game. It is shown as disabled and always off. Has anyone encountered this? Is