IPhone3G, whats the result?

Hi..
I hope till now many of you have purchased iPhone3G. I want to know how was the experience of purchasing it.
1)Did you find any difference between iPhone and iPhone3G?
2)Is the speaker having more volume?
3)Does wireless and 3G eats less battery than the previous iPhone's internet?
4)Is the iPhone3G slow or hangs?
5)Overall how did you find iPhone3G?
Thank You!

*1)Did you find any difference between iPhone and iPhone3G?*
iPhone 3G screen has a slight yellow tint
iPhone 3G feels nicer in my hand
iPhone 3G connectivity on WiFi is slower than old WiFi waiting to find out if more people are experiencing the same problem
*2)Is the speaker having more volume?*
Yes its slightly louder
*3)Does wireless and 3G eats less battery than the previous iPhone's internet?*
This is tottaly subjective but it "seems" to me that 3G EATS up battery about the same or slightly more than the old iPhone.
4) Is the iPhone3G slow or hangs?
Without question the iphone3G is slower and hangs up considerably more than the old iphone.
Now I don't know if it’s because of the 2.0 update, or the new apps store, or the phone components where not the same quality as the old iPhone. I really think it has to do with the apps. So I’m going to uninstall all of them and give it another shot.
5)Overall how did you find iPhone3G?
Overall I love the 3G speeds over edge. So to me thats the biggest part.
The constant crashing is a MAJOR problem. In a typical hour period the iphone 3G is either un response or an app crashes about 3 - 8 times.
Certain features eg clicking on the SMS button was much faster than it is now.
If you don’t care about 3G speeds stick with your old iphone, until apple fixes the many problems.

Similar Messages

What the result while a user thread holding pidlock to sleep?

I know pidlock is used to protect process create/exit/swap and so on. When a user kernel thread sleeps holding pidlock, the dispatcher doesn't work or system will hang? So what the real function of pidlock?
Thanks?

Hi, can't be sure out here, but it sounds that perhaps there may have been a hidden folder behind those other ones? Did you drag select?
If it isn't that then perhaps som Disk/OS maintenance is in order.

HT2638 Hi, My Iphoto (on Mavericks) shows me a thumbnail but actually it is another photo whan you open it up...any idea what the problem could be? big thanks!

This has happened since my snow leopard update to be fair. I continuously mess up all of my "events" with photoes that shoul now be there due to this mistake.
Anyone know something about it?
Big thanks in advance

given the time this problem has existed hard to say what the results will be but Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - rebuild your thumbnails - this may take several tries
LN

I want to make a copy of slide show create from my own photographs and with a an audio track behind them. I have carefully followed the iDVD tutorials and burnt the result to a disc but image quality is very poor. What is wrong?

I want to make a DVD of a slide-show with an audio track behind the photographs. I have carefully followed the iDVD video tutorials but the result is far from satisfactory. The quality of the images on the resulting DVD are blurred and indistict although the original photographs are of a very high quality. Where am I going wrong? Would I have better results from a different program than the inbuilt iDVD and if so so what programs have others found to be better? I should be grateful for some expert guidance.

Hey Falcopebo,
Thanks for using Apple Support Communities.
Looks like you have image quality issues when using iDVD to burn.
iDVD 7.0: Burned DVD has interlacing, pixelation, or image quality issues
http://support.apple.com/kb/ht4078
A standard DVD made by iDVD is made to the standard DVD resolution of 720 X 480, which is smaller than most HDTVs and monitors. When expanded to fit the entire screen or monitor, the image will distort slightly due to upscaling to fit the screen or monitor.
Have a nice day,
Mario

TS1702 i if use "search" in music on my ipod touch 5th gen the result just show only album and playlist but nothing song result.whats wrong with it?please help

i if use "search" in music on my ipod touch 5th gen the result just show only album and playlist but nothing song result.whats wrong with it?please help

The users guide says:
Spotlight searches the following:
Contacts—All content
Apps—Titles
Music—Names of songs, artists, and albums, and the titles of podcasts and videos
Podcasts—Titles
Videos—Titles
Audiobooks—Titles
Notes—Text of notes
Calendar (Events)—Event titles, invitees, locations, and notes
Mail—To, From, and Subject fields of all accounts (the text of messages isn’t searched)
Reminders—Titles
Messages—Names and text of messages
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsynce all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

What is the result of using the "post tax payable" option in the advance ta

what is the result of using the "post tax payable" option in the advance tax report - program rfumsv00? I know it will then post the input and output tax to the tax payable GL account. But from point of view of reporting, when you run the advance tax report, will there be any change after doing this posting to tax payable account?

Basic communication aside, J2EE is mostly a synchronous run-time environment. When asynchrony is introduced, a whole new set of infrastructure requirements is needed to support QoS and commercial-quality implementations. In other words, it's not just about API anymore, it's about reliable communication, exception handling, time outs, etc. You may want to look at this Q&A to see some of the benefits provided by J2EE as underlying run-time for orchestration:
http://searchwebservices.techtarget.com/ateQuestionNResponse/0,289625,sid26_cid511195_tax292928,00.html
Doron\
Download Collaxa 2.0
http://www.collaxa.com

I run Windows 8.1. I have received the result after several attempts uninstalling and reinstalling iTunes, "ITunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 127)" What can I co?

I run Windows 8.1. I have received the result after several attempts uninstalling and reinstalling iTunes, "ITunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 127)" What can I do? to solve the problem. Tried to clean the windows registry, no change. Very frustrating. Any advice is much appeciated.
Thanks.

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

What's the report to see the result after we run KSUB ?

Dear All,
Could you kindly help me ?
I'm new for FI-CO .
If i'd like to run assessment, and in the cycle I use Receiver Rule: Variable portion and type is Plan SKF . The sender will be cost center and receiver is WBS Group.
Afterward, I run KSUB to run cycle.
And I'm keen to see the result after doing the assessment, what's the report for it ?
Could somebody tell me ??
I wanna see the result from allocation ( type assessment). What's the report for it ?
Thanks a lot.
Have a good day,
Best regards,
Daniel N.

Hi,
the sender / receiver relation and the values are reported after executing KSUB.
Another possibility is to execute KSB1 report for the sender cost centers and the assessmnet cost elements for the assessment period. Create a layout where the receiver (=partner object) is displayed.
Best regards, Christian

When I convert my PDF file to either Word or Excel, the result is garbage and not usable. What am I doing wrong?

I have converted two PDF files to both Word and Excel. The result is garbage and unreadable. I want to edit the content of the PDF file and thought that this was the solution. What am I doing wrong?

It's probably not something wrong you're doing, just the way the file was
created. You can look under File - Properties - Description and see what
application and PDF producer were used to generate it. My guess is it was
not produced using Adobe software.
At any rate, there's no a lot you can do about it, I'm afraid. You can try
re-frying it, ie sending it to the PDF Printer to produce a new copy, and
then exporting that to Word/Excel, but that's about it.

HT1338 When I email an attachment with "Always Sent Windows-Friendly Attachments" checked, the result is a picture embedded in the body of the email, not a attachment. What am I doing wrong.

When I email an attachment (a .jpg file) with "Always Send Windows-Friendly Attachments" checked, the result is a picture embedded in the body of the email, not a attachment. What am I doing wrong.

1. "Always Send Windows-Friendly Attachments" has nothing to do with the display of attachments on either your machine or other ones. It's an esoteric setting that strips the resource fork from Mac files (that might have them) which could apper as a duplicate file on the Windows machine.
2. Send Plain Text emails. Then it will always be received as an attachment.

If empty internal table in select for all entries what is the result?

In select all entries statement , if empty internal table is there then what is the result.

Hello,
If the table is empty then it will select all the records table....
To aviod this u have check the body of the itab.
If not itab[] is intial.
select * ....
endif.
I useful reward.
Vasanth

I Use the last FCX but I have a prob when I export (share) to dvd the result is over 4GB for a single DVD is about 6 to 9 Gb for a short film of 1h so what can I do to fix this

I Use the last FCX but I have a prob when I export (share) to dvd the result is over 4GB for a single DVD is about 6 to 9 Gb for a short film of 1h so what can I do to fix this thnks

These "Share" files are accessed and used by the Create Disc app.
Create Disc is buried in the FCP X package.
Applications>FCP X>Show Package Contents>Contents>Plugins>Compressor>Compressor Kit.bundle>Show Package Contents>Embedded Apps>Create Disc
I'm wondering if having the Compressor Application on a Mac makes a difference to having just FCP X on a Mac and the use of the Sharing feature.
I have Compressor loaded and find that DVD and Bluray burns from Share without any glitches as some are experiencing.
Al

My "What's New" procedure doesn't show the result Search result page

Hi,
I needed a "What's New" report for a content area. The advanced search screen has the option to query with the create date, but you can save the search with something like #sysdate-7. So I created the following procedure:
create or replace procedure whatsnew
(p_caid in number default 0
,p_folder_id in number default 1
,p_days in number default 7
) is
a_attribute_id portal30.wwsbr_type.array;
a_attribute_name portal30.wwsbr_type.array;
a_attribute_caid portal30.wwsbr_type.array;
a_attribute_data_type portal30.wwsbr_type.array;
a_attribute_operator portal30.wwsbr_type.array;
a_attribute_value portal30.wwsbr_type.array;
begin
a_attribute_id(1) := '10';
a_attribute_name(1) := 'createdate';
a_attribute_caid(1) := '0';
a_attribute_data_type(1) := 'date';
a_attribute_operator(1) := portal30.wwsbr_search_api.greater_than;
a_attribute_value(1) := to_char(sysdate-p_days);
portal30.wwsbr_search_api.submit_search
(p_search_terms => null
,p_caid => p_caid
,p_current_caid => p_caid
,p_folder_id => p_folder_id
,p_folder_caid => p_caid
,p_include_child_folders => portal30.wwsbr_search_api.yes
,p_attribute_id => a_attribute_id
,p_attribute_name => a_attribute_name
,p_attribute_caid => a_attribute_caid
,p_attribute_data_type => a_attribute_data_type
,p_attribute_operator => a_attribute_operator
,p_attribute_value => a_attribute_value
end;
Now you can call this from a dynamic page component (have it displayed as portlet), or include it as an URL item in the content area (/pls/portal30/portal30.whatsnew?p_caid=33&p_folder_id=1&p_days=7).
This work fine and show the search result. Now I've customized the Search Result Page, but it seems that wwsbr_search_api is navigating to a standard (fixed layout) search result screen (square item/folder links in stead of tabs) and not to my customized Search Result Page. If I click the submit button in the result screen then it navigates to my customized Search Result Page.
So why doesn't wwsbr_search_api navigate to the customized Search Result Page, or am I doing something wrong ?
Regards,
Willem-Pieter van der Lugt
Oracle Consulting NL

Hi,
I just saw topic http://technet.oracle.com:89/ubb/Forum82/HTML/000617.html with the answer pointing to bug 1869531.
regards,
Willem-Pieter van der Lugt

What is the result this in access sequence exclusive not marked

Hi Gurus,
In pricing access sequence v/07 if we did not mark the exclusion what will hapeen. In that access sequence it contain 3 tables i did not mark as exlusion what will happen. What is the result of this.
Thanks & Regards
Points will be rewarded

Hi lakshmi pathi
Thanks for your replay. When am maintaining condition record in vk11 all condition recordds coming. In that am selecting am maintaing. Even though if i put exclusive indicator in access sequcne even though same records am getting in the same order.\
please clarify on this
Thanks & Regards
points will be rewarded

What does that mean the result of (int)character ?

---- code snippet
char ch = '가';
System.out.println( (int)ch );
As you might know, the value of ch is Korean character that takes up to 2 bytes.
And the result of above code is 44032.
What does that mean this number? Is it ASCii code or unicode number?
Of course, if the value is 'a', what I get is 97 which is ASCii code for 'a'.

All Java char values represent UNICODE values (defined at www.unicode.org).
But it's generally more common to represent them in hexidecimal because the code is divided into 255 pages of 255 characters.

IPhone3G, whats the result?

Similar Messages

Maybe you are looking for