Iphone3GS - not connecting to TV

i've tried to connect my phone3gs to my TV (Samsung) to play audio, but the TV is not recognizing that anything is there. Am i doing something wrong? (TV OUT is set to 'widescreen on' "NTSC')
help!

right. i understand that, but i can't even get the TV to register any input from the iphone. it just keeps saying "no signal".
Do i need to have the video or youtube running when i plug it in? why won't it display anything at all?

Similar Messages

  • IPhone 4S iOS 6.1.3 will not connect to or even find any wifi networks, any ideas?

    I updated my iPhone 4S to iOS 6.1.3 and therein started my wifi problems. At first the signal was just dropping out and I kept getting the "Unable to join..." message, which was annoying but it had periods of time where it worked fine and gave me some hope. Since yesterday my phone has not actually identified any of the available wifi signals (not just my router, but also any other networks when I've been out and about) and so I am unable to join any as I cannot even see them to select them.
    I have tried:
    - changing the channel on my router
    - turning my router off and on again
    - turning my phone off and on again
    - plugging my phone into the computer and making sure it was updated (I did this yesterday which may have made it worse as that's when the problem intensified?)
    - resetting my phone by holding down the home and power button
    - resetting the settings on my phone (numerous times)
    - changing the WPA2 settings on the router
    - checking that I have got the wifi turned on
    - setting my iPhone to "ask to join" wireless networks
    I would suspect something fishy with the router, except that my husbands iPhone is still working fine (he has not yet updated his iOS), my MacBook and his laptop are still connecting fine, as is the PS3 and the wireless printer. I went out today to a place with an open wifi network and my friend with an iPhone 4S (*not* updated to iOS 6.1.3) could see it and connect to it, but my phone didn't even pick it up and we were sitting right next to each other. There are 10 wifi networks in the vacinity of my house which my MacBook and husbands iPhone can see but my phone is now not seeing any of them. This HAS to be something on my phone, but I can't ruddy well work out what it is and meanwhile I am going to get charged loads for using up my data allowance. The only good thing so far about having all this faff is that when I updated to 6.1.3 my phone wouldn't send any photos to anyone unless it was via iMessage and since I've been changing all the settings I found one that works, so I have been able to send my mother in law some pictures of her granddaughter. My own parents will be getting upset by the lack of wifi though as I don't want to FaceTime them using my 3G.
    Any help would be most appreciated.

    Hi JimHdk,
    I have also upgraded to ios6.1.3, and facing same wifi connecting problem, after upgrade my iphone3gs is not connecting to my laptop shared wifi, which was working perfect with ios6.1.2,
    and its not an hardware error, its software error, crippy apple does not test their releases which causes problem to users.
    Updates:
    Earlier wifi connection which i was using on my Iphone 3gs, was WPA2, which was shared from my laptop via "Microsoft virtual WiFi Miniport Adapter", was working perfectly till ios6.1.2, but when i have upgraded my iphone 3gs to ios6.1.3, my iphone 3gs became unable to join wifi,
    Today I have created "adhoc network"  on my laptop using "Broadcom 4313 802.11b/g/n"(default wifi adapter of my laptop), and kept security type "WEP", and found my wifi working fine with my iphone 3gs,
    So if someone using LAN internet on their laptop, they can share their LAN internet to use on their ios devices, via creating an 'adhoc network',
    How to create an 'Adhoc Network',
    choose Security Type : WEP (compatible with ios6.1.3)
    http://www.youneedabudget.com/support/article/create-an-ad-hoc-network-in-window s
    Vinay Rajput

  • IPhone 4s IOS 6.1.3 will not connect to 2011 BMW 328XI

    Hello,
    I recently updated my iPhone to IOS 6.1.3.  Everything appears to be working except I can no longer play music through my iDrive system.  The phone connects fine to the stereo in my other car and can be controlled from the stereo head unit.  I can also connect it to my home stereo through the headphone jack and that works flawlessly as well.  When I connect it to my iDrive usiing the Y USB cable, the external devices just says not connected and nothing happens.  I have tried reseating the cable and also cleaning the 30 pin connector on the phone but no luck.  Has anyone had this happen?  Should I just assume the cable has now gone defective and replace it?
    Thanks!
    4

    Hi JimHdk,
    I have also upgraded to ios6.1.3, and facing same wifi connecting problem, after upgrade my iphone3gs is not connecting to my laptop shared wifi, which was working perfect with ios6.1.2,
    and its not an hardware error, its software error, crippy apple does not test their releases which causes problem to users.
    Updates:
    Earlier wifi connection which i was using on my Iphone 3gs, was WPA2, which was shared from my laptop via "Microsoft virtual WiFi Miniport Adapter", was working perfectly till ios6.1.2, but when i have upgraded my iphone 3gs to ios6.1.3, my iphone 3gs became unable to join wifi,
    Today I have created "adhoc network"  on my laptop using "Broadcom 4313 802.11b/g/n"(default wifi adapter of my laptop), and kept security type "WEP", and found my wifi working fine with my iphone 3gs,
    So if someone using LAN internet on their laptop, they can share their LAN internet to use on their ios devices, via creating an 'adhoc network',
    How to create an 'Adhoc Network',
    choose Security Type : WEP (compatible with ios6.1.3)
    http://www.youneedabudget.com/support/article/create-an-ad-hoc-network-in-window s
    Vinay Rajput

  • Why I can not connect ipad2 and iphone5 to wifi by using d-link modle? but my computer and iphone3 can do it.

    why I can not connect ipad2 and iphone5 to wifi by using d-link modle? but my computer and iphone3g can do it.

    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting
    http://www.apple.com/support/ipad/wifi/
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • My iphone 3g will not connect to network, but 3gs will,,, why?

    my older iphone3g will not connect to my homenetwork, but my 3gs will.  Why?

    Hey ebe301,
    Sorry to hear about your troubles with your PC. If you are not seeing your iPhone on your computer, then take a look at the link below to walk you through getting that working again. It will have you verify that drivers are installed and working as well as any third party software that may be causing conflicts. 
    iPhone, iPad, or iPod not recognized in iTunes for Windows
    https://support.apple.com/en-us/HT204095
    Take care,
    -Norm G.  

  • What do i do if my internet is wep and i need it to be wpa2 because my ipod touch 4th gen connects to the internet but when i click on safari or itunes it says safari cannot open the page because its not connected to the internet

    what do i do if my internet is wep and i need it to be wpa2 because my ipod touch 4th gen connects to the internet but when i click on safari or itunes it says safari cannot open the page because its not connected to the internet. i have contacted apple support and they said to change from wep to wpa2 but when i change it to wpa2 and type in password and connect on my laptop it says the saved setting on this computer for the network do not match the require ments of the network

    My 2nd gen works fine with WPA2 and AES encryption.
    You may need to go back and start over.  Reset the router back to factory defaults, log on as the admin, set up security, DHCP, and make sure the IP address pool has enough IP addresses to lease to ALL of the computers/devices that will connect to that the router.

  • ITunes could not connect to the iTunes Store "Error Message"

    I recently added iTunes 7.6 to my Windows XP operating system at the same time when I added an *Ion USB Turntable (TTUSB).* I currently have the 80G iPod with the larger video screen. I added in the supplied software of the EZ Vinyl Converter. The software reads from Gracenote and imports into iTunes okay. But now my PC cannot access the iTunes store to buy songs, read the tracks on the discs, or display new album artwork. The diagnostic read the network connectivety test, the CD/DVD drive, and iPod connectivity tests all read okay. I followed the directions on checking the network settings under the Internet Options Tool "Connections" Lan Settings and the Automatic detection and still no dice. All I get is "Make sure your network is active."
    Can anybody help out their?
    Microsoft Windows XP Professional Service Pack 2 (Build 2600)
    HP Pavilion 061 ED842AA-ABA M7250N
    iTunes 7.6.2.9
    QuickTime 7.5
    CD Driver 2.0.7.3
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 1.1.4.7
    Bonjour 1.0.4.12 (118.4)
    iTunes Serial Number 425XXXXXXXXXXXXX
    Current user is an administrator.
    The current local date and time is 2008-07-06 01:07:54.
    iTunes is not running in safe mode.
    Video Display Information
    RADEON X300 Series
    RADEON X300 Series Secondary
    ** External Plug-ins Information **
    No external plug-ins installed.
    ** Network Connectivity Tests **
    Network Adapter Information
    Adapter Name: {1C6FC80D-7300-43A2-A78B-9DFA93BF7727}
    Description: Intel(R) PRO/100 VE Network Connection - Packet Scheduler Miniport
    IP Address: XXXXXXXXXXXX
    Subnet Mask: XXXXXXXXXXXX
    Default Gateway: XXXXXXXXXX
    DHCP Enabled: Yes
    DHCP Server: XXXXXXXXXX
    Lease Obtained: Sun Jul 06 01:02:58 2008
    Lease Expires: Sun Jul 06 02:02:58 2008
    DNS Servers: 66.51.205.100
    66.51.205.100
    66.51.206.100
    Active Connection: LAN Connection
    Connected: Yes
    Online: Yes
    Using Modem: No
    Using LAN: Yes
    Using Proxy: No
    SSL 3.0 Support: Enabled
    TLS 1.0 Support: Disabled
    Firewall Information
    Windows Firewall is on.
    iTunes is enabled in Windows Firewall.
    Connection attempt to Apple web site was successful.
    Connection attempt to iTunes Store was successful.
    Secure connection attempt to iTunes Store was successful.
    Secure connection attempt to iPhone activation server was successful.
    iTunes has never successfully accessed iTunes store.
    ** CD/DVD Drive Tests **
    LowerFilters: PxHelp20 (2.0.0.0),
    UpperFilters: GEARAspiWDM (2.0.7.3),
    E: HL-DT-ST DVD-RAM GSA-H55N, Rev 1.03
    Audio CD in drive.
    Found 12 songs on CD, playing time 39:58 on Audio CD.
    Track 1, start time 00:02:00
    Track 2, start time 04:18:00
    Track 3, start time 07:16:25
    Track 4, start time 11:23:70
    Track 5, start time 15:23:17
    Track 6, start time 20:15:17
    Track 7, start time 23:04:67
    Track 8, start time 26:10:40
    Track 9, start time 28:59:05
    Track 10, start time 31:31:42
    Track 11, start time 33:32:32
    Track 12, start time 37:03:57
    Audio CD reading succeeded.
    Get drive speed succeeded.
    The drive CDR speeds are: 8 10 16 40 48.
    The drive CDRW speeds are: 8.
    The drive DVDR speeds are: 8.
    The drive DVDRW speeds are: 8.
    ** iPod/iPhone Connectivity Tests **
    iPodService 7.6.2.9 is currently running.
    iTunesHelper 7.6.2.9 is currently running.
    Apple Mobile Device service 1.14.0.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) 82801DB/DBM USB Universal Host Controller - 24C2
    Intel(R) 82801DB/DBM USB Universal Host Controller - 24C4
    Intel(R) 82801DB/DBM USB Universal Host Controller - 24C7
    Intel(R) 82801DB/DBM USB 2.0 Enhanced Host Controller - 24CD
    Intel(R) 82801GB USB Universal Host Controller - 27C8. Device is working properly.
    Intel(R) 82801GB USB Universal Host Controller - 27C9. Device is working properly.
    Intel(R) 82801GB USB Universal Host Controller - 27CA. Device is working properly.
    Intel(R) 82801GB USB Universal Host Controller - 27CB. Device is working properly.
    Intel(R) 82801GB USB2 Enhanced Host Controller - 27CC. Device is working properly.
    FireWire (IEEE 1394) Host Controllers:
    VIA OHCI Compliant IEEE 1394 Host Controller. Device is working properly.
    Connected Device Information:
    HP_ADMINIST (L:\), Fifth Generation iPod (iPod with video) running firmware version 1.3
    Serial Number: 8K645xxxV9R
    Bus Speed: 61440

    I'm seeing this error on some, but not all, of my Windows XP machines. On my personal development XP box, I see this error if iTunes is closed when I try and access iTunes U via my transfer script or Stanford's.
    "iTunes could not connect to the Music Store. The network connection was terminated unexpectedly. Make sure your network connection is active and try again."
    The errors occured in IE 7 Beta, Firefox 1.5.x, and Firefox 2 Beta. In each case, iTunes U loaded after I clicked the 'ok' button in iTunes. I did notice that in Firefox's case an additional pop-up window appeared that asked whether or not I had iTunes; when I selected that I do have itunes, it transfered me to iTunes but generated the error.
    After getting these errors on my Windows XP machine, I tried it on two different lab machines running Windows XP, and didn't get the error message once -- I tried it in IE 6, Firefox 1.0.x and Firefox 1.5.x and they all worked. It even worked with IE 7 Beta and Vista Beta.
    Based on this, I think the problem must lie in how Windows registered iTunes, and the handshake just isn't happening properly.
    Ken Newquist
    Lafayette College

  • I cannot update my ipad2 to ios5.  Updating through iTunes on pc Windows Vista, Error message reads "cannot connect to iPad Software Update Server.  Tried resetting network settings, still not connecting.  Tried updating iTunes, still not connecting.

    I cannot update my ipad2 to ios5.  Updating through iTunes on pc Windows Vista, Error message reads "cannot connect to iPad Software Update Server.  Tried resetting network settings, still not connecting.  Tried updating iTunes, still not connecting.

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
     Cheers, Tom

  • Hi, my MacBook Air is not working anymore if it's not connected with the power cable. It's pretty new so I can't imagine that the battery is dead already. Why can't I use my MacBook Air without the power cable even though I charged it for hours?

    Hi, my MacBook Air is not working anymore if it's not connected with the power cable. It's pretty new so I can't imagine that the battery is dead already. Why can't I use my MacBook Air without the power cable even though I charged it for hours?

    Please take the Mac to  Apple store to have it checked out.
    Genius Bar reservation
    http://www.apple.com/retail/geniusbar/
    Best.

  • I need to upgrade my 10.5.1 os on my G4/1.25 (I'm having some audio-midi setup problems), but it's a machine that is not connected to the internet.  Do I have any options?  Thanks!

    Friends,
    I'm having some audio-midi setup problems on my G4/1.25/10.5.1 machine.  I'm thinking that a routine OS upgrade might help.  However, this machine is not connected to the internet.  Are there any alternate methods for upgrading system software?  Thanks in advance!

    OK, what you should do is download the updates on another machine and burn them to a disc.  Start at this link http://support.apple.com/downloads/#leopard for downloads and find, among other things, the 10.5.8 combo updater that works on PPC machines, plus security, QuickTime and other updates.  Going from 10.5.1 to 10.5.8, there will probably be a bunch of things that you should install.  Being off the internet with the machine, you can't have Software Update sort it out, so something might get missed, unfortunately.
    My suggestion is this: if it looks like you might need a download, get it onto that disc.

  • Win 7 Pro not connecting to remote Win 7 pro via port 3389

    I have a new Dell XPS 8700 Win Pro 64 bit that will not connect to work machine of same specs, i.e, XPS 8700 Win 7 Pro. Ironically an old lap top running XP Pro
    will connect to work computer. I have a new Dell laptop with Win 8.1 pro that will not connect either.  I tried everything, uninstalled Symantec End point, shut off the Windows Firewall, did a complete
    hardware check via Dell Diagnostics, made sure network discovery was on as well as all remote services, turned on RD, changed every setting on the  RD dialog box, pinged the external IP and it timed out. None of the forums seem to have an answer and I
    am at wits end. I set up 15 machines at work under Win 7 for RD and all are working with Win 7 Pro.

    Hello Al Wayne,
    What is your current situation?
    Please share us more information for better analyzation as Frederik Long mentioned.
    Do you mean that the Dell XPS 8700 and laptop can’t RDP to work Windows 7 machines, but the Windows XP laptop can RDP to?
    Please take the following steps for troubleshooting:
    1. Share us the result of command ipconfig /all in the source and destination computers
    2. Check if we can ping the Windows 7 machines from the Dell XPS 8700 and laptop
    Best regards,
    Fangzhou CHEN
    Fangzhou CHEN
    TechNet Community Support

  • Error message "not connected to internet" when trying to sign in to BB id with Mac laptop

    I have a Mac laptop and was forced to remove the original BB Link OS when the Z10 launched.  I replaced the OS with the current one but now it doesn't allow me to use my Mac's computer name eg.  John Smith's Mac book. I can only use a single name.  I suspect that is why I'm not getting the itune's library to load.  Also, I can't sign into my BB id, I get a message that says I'm not connected to the internet.  I've taken the firewall off as I heard that was a solution with Windows but it didn't work.  Any ideas?

    i have the same problem. I have window 7 pc. I had to use internet to download link so i don't understand why it is not allowing me to use link or do set up. I uninstalled my previous bb desktop driver in hopes that would help. It didn't. I appreciate any help on this forum

  • Can not connect wireless through Bootcamp Windows XP to Timecapsule?

    Any help would be appreciated.
    I recently purchased an iMac with Leopard (10.5.2). Today, I used Bootcamp to install Windows XP with SP2. I created a FAT partition of 32 gigs and followed all of the steps (including installing drivers off of MAC OS installation disk 1 while on initial XP boot up).
    My wireless network is on a Timecapsule and is "WPA Personal secured". The Mac OS detects the network and connects instantly, my work laptop PC detects the network and connects instantly. However, the newly installed XP detects the wireless network but will not connect. When I try to connect to the network, I receive an error message that basically states "unable to connect...". I do not even get to a screen that asks for me to enter a network key or password. When I try to connect to two other networks in the neighborhood, I at least get the network key screen.
    I have gone into the Windows network tools and have tried to manually configure the connection, but I still get the same problem. I thought maybe I had "WPA2 Personal" enabled as the security setting for the network (XP does not support WPA2 out of the box) , but I have it as "WPA Personal".
    Can't figure it out. I am new to Macs (about 1 month). The reason I switched was because I could run both Leopard and XP.
    Best regards,

    Solved my own problem.
    FYI
    Even though my security settings on my Timecapsule are listed as "WPA Personal", my work PC Laptop kept detecting as "WPA2 Personal". I even removed all security settings from the Timecapsule and my laptop still detected as "WPA2".
    I know that XP does not support WPA2 out of the box.
    I hooked directly into the Timecapsule via an ethernet cable while in Windows environment. Thankfully, I was able to access the internet. I went to Microsoft and did a search for WPA2 patches for XP. Found one that allows XP wireless connection to WPA2. I installed the patch and was able to detect and connect wirelessly to Timecapsule from XP.
    After two days, I have come to the firm believe (don't know the technical reasons why) that Timecapsule is a WPA2 device and that the XP patch is the only way to create initial connectivity. It is sort of ironic that although I wanted to connect wirelessly, I had to first connect via an ethernet hard connection.
    Solve one problem, left with another. I have a Epson all-in-one scanner, printer, copier hooked to the Timecapsule. My iMac picks it up fine wirelessly but I am getting nothing on XP. Hopefully it is a simple driver download issue.

  • Can not connect outside of Lan to with rtsp PVC2300

    I have the following cameras set up at my office
    1 - PVC2300
    2 - WVC54GC
    3 - AXIS 225FD
    I have a BEFSR81 Router
    I have a computer on Windows XP running the surv software to record.  Everything with that is good.
    I also have 2 desktops.
    I have been playing around with the rtsp feed with the pvc2300, but have run into a few problems.
    1(a).  I can not connect outside of the LAN with RTSP with either the VLC player or quicktime.  It connects and asks for a password and then just hangs.
    The PVC 2300 local address is 192.168.1.102 with ports 554, 5000-5010, and 6970-6999 forwarded on the router.  What am I missing?
    1(b) I can successfully connect with my blackberry bold, although when I try to change the default port (554) to something else (I would like to RTSP my the AXIS camera as well,  so I will need a different port) it connects on my bold, but then says server is unresponsive. What am I missing here?
    2.  The voice with the PVC 2300  using http outside of the LAN (internet) lags quite baddly and is choppy.  This happens without fail when I have all 4 cameras running, which I understand is upload bandwidth problem.  But it also happens when I connect to just the PVC2300.  I do have a connection to all 4 cameras inside the LAN to the XP running the surv software, but that is it. Is the my router acting buggy?  I have unplugged the router for 5 sec, and it fixed it for a while, but it always comes back.  I have donwloaded the latest firmware for the router and PVC 2300 and that didnt seem ot fix it either.  Suggestions?
    3.  This is more of a question.  I know the mobile streaming of the PVC 2300 does not include voice.  Is there an app or way that I can just get it to my Blackberry.  Even if I didnt get the video, voice is sometimes more important to me.
    I hope Ive been clear enough in my description, Im very self taught (google is amazing), but I am in no way a techy.
    Thank you in advace for your help.
    Colin

    Glad to hear you are successfully using the SWVMS16. That program is really cool and useful. I just cant tell you how that model of Linksys Router can work for you here (that is not a model we support on this community as its not small business)
    Regarding RTSP access, are you also including the mobile.sdp in the URL?
    RTSP:///mobile.sdp   I noticed in the camera GUI with the newer firmware, you can specify an access code under mobile settings after checking the enable mobile streaming box.  That word may be what you have to include, so check that too...
    Try this locally first and then remotely is the easiest way to see if you got it right, then it just becomes a routing or firewall issue to figure out.
    But your forwarded ports look right and should be opened.
    Under advanced settings, you can define an alternate HTTP, HTTPS or RTSP port

  • Can not connect computer to Cisco Connect -EA3500

    Can not connect computer to Cisco Connect -.Receive error msg 82BD0305. Reset to EA3500 to default and reinstalled software.

    Reading the manual it says the username is blank, password 'admin'.

Maybe you are looking for