Iphone3gs now not working after i have erased all settings and contacts please help
i have just erased all contacts and settings as i have just brought my iphone from a friend so did not need to backup anything on my computer. it then went blank and then turned on by it self with a picture of the iphone USB with a arrow point to a itunes symbol, and at the bottom it says slide for emergency. so can not get on to my phone at all.. Help please
You need to connect it to iTunes and reactivate it.
Similar Messages
-
my device have now 8 hours after i did Erase All Content and Settings doing erasing , is this normal
Something has gone wrong, as this should have happened almost instantaneously. Turn your phone off, then force it into recovery mode:
Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new. -
Have just downloaded iSO6 to my ipad and now facetime will not work properly. It will take incoming but will not allow to make a call. Could anyone offer suggestions to the problem please?
Hi Deb,
Deauthorizing all is definitely the way to go. You will just need to authorize your computer again after, as well as your husband's.
Here's some additional information on deauthorizing all:
iTunes Store: About authorization and deauthorization
http://support.apple.com/kb/ht1420
I hope this helps!
- Ari -
Hi! I have erased all settings and connections of my ipad 1 generation by mistake and I tried many times to restore all settings and connections by connecting to iTunes but Itunes did not show me a column to restore my ipad, can someone teach me the step by stepto restore settings after connecting to iTunes, thank you!
If you have a backup of the iPad on your computer then you should be able to right-click (command-click on a Mac) the iPad 'device' on the left-hand side of iTunes and select 'restore from backup' on the pop-up - you can't just restore settings though, you will need to restore the whole iPad.
-
My phone ringer will not work. I have gone to settings and sounds and have the volume up all the way. The vibrate setting is off.
settings - notification - message - show preview - off
-
How do I get the iPad to work again after I have erased data (intentionally) and do not have my base computer to plug into to access itunes?
If you have iOS 5 installed on it, you don't need a PC. simply turn it on and set it up.
if you don't have iOS 5 then you'll need a computer. -
I gave my ipad 2 to my brother last month. After that he erased all content and settings, sign in with his apple id. The next day until now, I found out that I can not udpate my apps both on my iPhone and iPad Air. I had create new apple id, change my password, delete the icloud acc. But still I can not update my apps. I have many of red notifications on iPhone and iPad Air. What should I do? Thank you in advance.
1. It is never a good idea to include personal info like your email address or Apple ID in a post on an open forum.
2. The email you received DOES NOT say your Apple ID cannot be used to unlock this iPad. The email informs you that your Apple ID was used to unlock an iPad. Fortunately the iPad is yours. The message confirms that. If your Apple ID was used to unlock an iPad that was not yours your would then know to change your password. Since the iPad is yours you do not need to change your password.
Is your iPad working? -
Object is to sync address and calendar between laptop with Max OS 10.4.11 and iPhone. Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password for the laptop is now not working after the upgrade to 10.5., though it was working prior to the upgrade, for file sharing.
@ BDAqua > I tried your suggestion but no luck. holding opt+command just gave me a blue screen and it rebotted, pushing the disk out of the drive. Yes, the macbook has 1 gb of ram. I realize that the min req. call for 2 gb of ram so i've got an order in for another dimm to put into the machine. Thanks for your suggestions.
@ a_brody > Yes. The machine was plugged into a power source. The disk promts you to do that and i recall aspect this form other installs. Thanks for the reminder tho! ( btw your second post is like greek to me man!)
@ Kuncklesmac > You're right about Snow Leopard being an upgrade from Leopard. I'm aware of this. And yes previously i've been told by Apple that I needed the Box Set (not the family pack. i am using the family pack for OS Snow Leopard) to upgrade my 10.4.11 mac - they never mentioned adding ram but i figured that out on my own and an apple specialist recommended it when i purchased Snow Leopard and confirmed that I coul duse the Snow Leopard to upgarde from Tiger (10.4.11). I've also read extensively (as i said above) that it isn't necessary (always) to buy the box set. Several 10.4.11 users report having upgraded using the Snow Leopard upgrade disk only (not the Box Set) without trouble on intel macs (also see the apple link i posted). So i'm just ondering how they did it and i cannot.
Thanks fo rall yor help! -
accidentally removed from,sharing and permissions the admin user,and now i do not when i find the home icon at my computer i do not have permmission,and the mac does not works properly,lots of question mark at the dock ,please help
I'm going to assume that since you deleted your hard drive and all its files, you had a backup, yes? If the backup has an OS (bootable clone), then you can boot into it by holding down the option key when you start up you iMac and choose the backup drive. Then use Carbon Copy Cloner or Super Duper to copy the files back to your iMac.
-
i have ip 3gs and ios 4.1 i want to upgrade it to download latest version of apps ,which ios will be compatible and is there any danger to update ios before i erased all settings and content and i tried to update but it failed .it is working properly but i want to update from itunes.iwill do back up but is there any other thing i will face after updating like it will jut show apple loge and will not work. please answer quickly
An iPhone 3GS is too old to update to the very latest iOS and you will never be able to use apps that are compatible. The phone is just too old now in technology terms and the app makers have all moved on, so it's time to get a new phone.
Ideally, perhaps get an iPhone 4s or if you can afford it, an iPhone 5s or 5c which are the newest models. -
I am using apple configerator. I am unable to prepare or supervise 1 ipad. After preparing, I get an error that says "refresh completed but with an error, unable to verify supervision state" . I have erased all content and set up as a new ipad and tried again with no success. Any help would be appreciated
Hello jaybearden,
Thanks for the question. After reviewing your post, it sounds like you are not able to restore the iOS device since you get an error 9. I would recommend that you read this article, it may be able to help the issue.
Resolve iOS update and restore errors - Apple Support
Check your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
This has happened doing the latest software update. I think I accidentally deleted iTunes before doing the latest update in trying to make room on the phone when it came up with limited space.
My iPhone is locked with the connect to iTunes logo on screen. I have connected and trying to restore but it is not working. I have turned it on and off but to no avail.
The restore says two hours to down load. Has anyone else had this problem.iOS: Unable to update or restore
-
The date and time is not working after setting it to current date and goes back to may,26 2011
the date and time is not working after setting it to current date and goes back to may,26 2011; 2 PM . I bought my ipod tocuh 4th gen on july 18th
On the iPod, make sure your Calendar is set to Gregorian (Settings > General > International > Calendar). Also make sure your date and time on your computer is correct as well as the Time Zones on both.
-
I have erased all contant and settings and now my ipod wont choose the network
i have erased all content and settings and now when it says select network i do.. type password and it wont let me choose the network help me
Unplug ur router and wait 15 secs.
Plug it back in and wait 10-15 secs.
Try again. -
My visual voice mail is not working..i have done all the steps that I have seen on here to do. When I call the voice mail it says that there is not a box set up and I need to contact my system administrator.
I have had voice mail set up on my phone for 10 years. When I did the last iOS update before 7 I guess it wiped out my voice mail. Can I not set it up myself? I haven't changed my message in years.
Maybe you are looking for
-
Dynamic Filename with TimeStamp
Hi Guys, i'd like to post a file on a ftp with following structure: yyyyddmmhhmmssMatNr Well the TimeStamp is a given function from XI. Reading the payload for getting the matNr is also given with variable Substitution. But getting both together didn
-
Unapproved Sales Order Procurement Wizard creates target document
Production Order Creation through Procurement Wizard 1. Create a sales order with an item that has a Bill of Material In OEC computers Customer = "Norm Thompson" Item = "S10000" "Server Point 10000" 2. Set Sales Order to Unapproved ( Logistics Tab ->
-
Do I need to uninstall Adobe Flash Player?
I have been trying to download the up to date Flash Player for months now. When I try, I get the message that it couldn't be downloaded. I've been through help sites that guided me to adjust Internet Explorer security setting and everything looks g
-
I have several 3rd party plug-ins
Am currently using CS6...will I have to reinstall all the plugins when I download CC?
-
Does version of iPhoto effect printing???
Hi, Was this using iphoto 6? I ordered books using iphoto 5.0.4. But the dpi was upped in the plist to 300 dpi. So, this should not really effect the printing, the version of iPhoto you are using? I would assume the problems of quality is with the pr