Iphone4 Black Screen Error 1601 from restore.

To restore Iphone how to repair error 1601.
Iphone4 Black Screen

Question hello and welcome to Apple Discussions,
I was given a IMAC g3 (the white and blue single unit computer) i think the ram was like 190 mb plus virtual 190.
The first thing we need to know is whether the CD loads by tray or a slot.
As to the firmware problem.
http://www.capecodgraphics.com/imac_firmware.htm
see if any of that helps.
Richard

Similar Messages

I have an ipad 2, 16GB 3G WiFi, black screen, will not reset, restore or turn-on, keeps prompting error 1600 when trying to restore, but when other ipad 2 plugged in itunes works fine. Any idea's on how to resolve?

I have an ipad 2, 16GB 3G WiFi, worked perfectly, but now black screen, will not reset, restore or turn-on, keeps prompting error 1600 when trying to restore from recovery mode, but when other ipad 2 plugged in itunes works fine. Any idea's on how to resolve?
I have tried multiple laptops with both units, re-installed Itunes, same error message on one of the units but ok on the other. Thinking I have a defective Ipad 2, any ideas on what to do is greatly appreciated.

Tried Google? iPad error 1600

IPod 4G black screen, unresponsive, stuck during restore

Hi there, I would like to know if anyone has had this problem and if it has been resolved. I've encountered myself to be stuck in this loop of "waiting for ipod" when trying to restore the ipod to ios 6.1.3. It was previously on ios 6.1.2. This is my GF's ipod and she had told me she was using it just fine, but once putting it into her bag, and checking it again the screen had gone entirely black. She'd charge it assuming it was dead but it had gone into a recovery/DFU mode loop. Everytime I plug it into my computer I receive a message that it is in recovery mode and must be restored. I remind you again that no combination of buttons will cure the screen at this point. Holding home + power button for a few seconds for a soft reset just shows the same message when plugged in. Anyway, as I try to update, the screen turns on showing the apple logo and loading bar, but then once the step gets to "waiting for ipod" nothing works. I've tried letting it sit there for over 2 hours, but nothing. I have yet to find a solution, and it's become quite frustrating. Please let me know if you have any idea how to fix this. I've tried messing around using different methods such as iRec, TinyUmbrella, Redsn0w recovery, messing with hosts files, firewall, etc.

I think you are experiencing a fake DFU mode you are always on black screen and iTunes prompt recovery mode.
I think links below can help on how to put it to proper DFU mode, avoid error 1600 and 1601 when restoring, and proper update or restore.
How to Fix: iDevice Black Screen after Update or Restore
DFU over DFU

I always get a black screen & error message with YouTube, white screen on Facebook videos.

I always get a black screen & error message with YouTube. White screen on Facebook videos. I am using Firefox 17.0.1.
There is no more content to provide.

If you use extensions (Tools > Add-ons > Extensions) like Adblock Plus or NoScript or Flash Block that can block content then make sure that such extensions aren't blocking content.
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
You can check for problems caused by Flash updates and try these:
*disable a possible RealPlayer Browser Record Plugin extension for Firefox and update the RealPlayer if installed
*disable protected mode in Flash 11.3 and later
*disable hardware acceleration in the Flash plugin
*http://kb.mozillazine.org/Flash#Troubleshooting

Ipod touch 2G is black screen and won't restore in Itunes (error 21)

I have aquired an Ipod touch 2g 16g that I was hoping to make a present to my daughter with. The device is I guess what is called "Black Screen of Death". I can't get any image to display on the Ipod when trying to charge (which it apparenlty accepts) the item or when trying to connect it to Itunes. Itunes recongizes the item in recovery mode, and attempts to restore the item and consistantly gives the error 21 message. I am using Windows 7 and have tried to restore the device on a laptop running Win XP with the exact same results. The screen will turn white during the process, and the machine will from what I have read and believe go into DFU mode, but it stops with error 21. I am a Noob and have googled and googled for a week now with no luck. I have tried the reinstallation of Itunes, all the updates to both Itunes and the machine, no security software, the works. I tried connecting it to older son's laptop running Win 7 which he uses for his Ipod 2g 32 gig without problems. My device was recognized on his machine, and he said on his Itunes he briefly saw songs on the device he did not have on his machine/device in his library before it hung again in the recovery mode loop. I have read different articles and tutorials on jailbreaking and tried loading just the 'oem" firmware from apple with Redsnow and thought i was successful. The device went through the process of white screen, several boots/dings of on my PC, and then an image appeared on the Ipod of "loading Jailbreak data". After a few moments/minutes it then began what I believe is displaying the "verbose" booting running the lines of text on the screen. I then notice it to stop and give me an error of something to the affect of init failed, and then a "lan error, watchdog timeout, giving up, a long pause, then quick scrolls down the screen and reboot back to white screen. Holding the power button or home/power button puts it right back to a black screen and in the Itunes recovery mode loop/error 21 again. Can anyone please help me resolve this issue before I pull what's left of my hair out. I would love to get this working for my daughter before her birthday. Thanks in advance to anyone who helps.

Common, no one has any ideas? Well, don't know if this will help, but here's some new data to process. I noticed that when I was trying to load the firmware with Redsnow w/o installing any options to include Cydia I got errors displayed on the Ipod such as WMR NAND format invalid; NANDLegacyFTL failed. Someone has got to know something. I would appreciate any ideas or thoughts from anyone with any idea. Thanks

How to fix black screen on iPad after restoring from 4.2.1 to 4.3.3

recently i just restore my ipad from 4.2.1 to 4.3.3, suddenly it's just hang up on black screen (DFU mode i guess).
I've tried pressing home and off button for 10 sec and bla..bla....but doesn't work at all...
Googling to find another way such as use TU and others third party software..but still not bloody working at all...
After few troubleshoot done, thing goes worse and worse...
now my iTunes didn't detect my iPad at all.
Can anyone help me?PLEASEEEEE!!!!!!

Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

My ipod gen 3 is frozen after the latest update from itunes,it will not power on or restore without error.Itunes is up to date,changed usb ports,even uninstalled and reinstalled all apple software, error 1601 during restore

My ipod gen 3 is frozen after the latest update from itunes,it will not power on or restore without error.Itunes is up to date,changed usb ports,even uninstalled and reinstalled all apple software, error 1601 during restore

Hello, VvioletT.
Thank you for visiting Apple Support Communities.
I see you are experiencing issues syncing your iOS device. Here are a couple articles that I would recommend going through when experiencing this issue.
iOS: Troubleshooting USB-related alerts when syncing
http://support.apple.com/kb/TS5254
Resolve issues between iTunes and security software
http://support.apple.com/kb/ts3125
Cheers,
Jason H.

HT201444 My iphone 6 screen suddenly turned red and collapsed into a black screen, I can't restore or reset it, error 4013 appears on itunes

Last week I bought my iphone6 and today, when I was using it, a red screen appeared and it collapsed into a permanent black screen with an apple in the middle... I restarted it a few times and tried to connect it to itunes and restore it, but it doesn't work, it starts the restoring process but after a while it fails and error 4013 appears on my Mac's screen. I don't know what to do, please help me I really need to use my phone right now.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Changed rear housing but blank screen / error 1601

The rear housing had started to crack on my 3GS. This caused the power/sleep button to become intermittent so I decided to try and change the housing myself. Everything seemed to go back together fine but the power button still didnt work. I took it apart again, took the button off and just pressed the little button on the ribbon cable. it was still intermittent! during this i managed to snap the little prongs for the home button so now that doesnt work either.
After playing about for a while the screens now gone blank (not black..blank). my comp/itunes (windows 7) recognises the iphone as "in recovery mode and needs to be restored" i tried this but keep getting error 1601. ive followed the apple support pages...uninstalled itunes and reinstalled but nothing. tried running a script which i found to enter DFU mode which didnt do anything but to be honest im not really sure what im doing!
please help, its driving me crazy....

No, but I think there are a lot of very delicate connections and components inside the phone. There is a reason it's not considered user servicable. If you had a problem with a button, and you opened it up and re-assembled it and now the display doesn't work, I'd say there's a good chance that you broke something. Whether you intended to or not.
Maybe you can buy one with a physically broken display from e-bay or something and re-assemble a working phone from the frankenstiened parts.

Black screen on resume from sleep using open source AMD/ATI driver

When waking from sleep using systemctl suspend or pm-suspend , I am presented with a black screen. I can still open programs, type, etc. but cannot see what I am doing. I usually just wind up rebooting from whatever terminal I had open, but again I can't see what I am typing. Upon reboot, the screen starts back up again. Everything else seems to resume from sleep just fine, it's just the screen that won't turn back on.
I came from Ubuntu and had this same problem there. However, I only had this problem when using the open source xf86-video driver; when using the proprietary drivers, I was able to suspend/resume just fine. So it seems this problem is specific to the open source drivers.
If I'm using an external monitor, my external monitor will resume just fine after waking from sleep, but the laptop screen will not.
Googling around shows this is a common problem with AMD/ATI cards, and after a lot of attempts and failures I'm interested in knowing if anyone else has solved this problem.
What I've tried so far (without success):
-various quirks included with pm-utils to turn on dpms after resume
-xrandr after resumption from sleep
==xrandr --output LVDS --off (If used without suspending (so while the screen still works) this seems to crash Gnome the first time around, but Gnome automatically restarts. If used a second time, it completely blanks the screen and requires a reboot)
==xrandr --output LVDS --mode 1600x900
-xset dpms force on or xset dpms force off after resumption from sleep
-vbetool dpms off and vbetool dpms on results in error message "Real mode call failed"
-scripts using vbetool or xrandr when resuming from sleep
-switching between virtual consoles and gnome using alt-ctrl-fn-f1 and alt-ctrl-fn-f2 keys
My setup:
-HP Envy dv7
-UEFI dual-boot with Windows 8
-AMD Radeon HD 7640G
-xf86-video-ati 1:7.2.0-1 driver
-Gnome DE using GDM login manager
Thank you.
EDIT: I did try using the proprietary drivers for a time, but found I couldn't adjust my brightness. At first I thought working suspension > adjustable brightness, but I quickly changed my mind after one night of trying to work on an unadjustable maximally bright screen.
Last edited by broahmed (2013-11-23 02:18:57)

Unfortunately I could not fix the problem so I wiped my system and loaded all new drivers before I found this posting.
Is there a way to get the old ATI driver that works? The only one available on the ATI and Lenovo website is the latest one with the problem. I agree with you David, Lenovo should have fixed this problem already with ATI.
John

Black screen upon waking from sleep

Hello,
I have an intermittent problem with waking my entry-level MBP from sleep; on some occasions, the screen remains black instead of the system waking up and displaying the Finder.
Recently, upon waking from sleep, the authentication dialog displayed, I typed my password and pressed return, the dialog dismissed, the screen remained black, and the wait cursor displayed without spinning.
To recover, I needed to force power down and cold reboot.
system.log (in Console) contained the following entry at the time of the crash.
Aug 14 07:39:51 BF-H-MBP kernel[0]: NVChannel(GL): Graphics channel exception! status = 0xffff info32 = 0xd = GR: SW Notify ErrorAug 14 07:39:51 BF-H-MBP kernel[0]: NVChannel(GL): Graphics channel exception! status = 0xffff info32 = 0xd = GR: SW Notify Error
The entries surrounding the one above were as follows (the next to last one evidently was the final entry before the forced power down).
Aug 14 07:39:47 BF-H-MBP kernel[0]: IOBluetoothHCIController::restartShutdownWL this is a wake from sleep
Aug 14 07:39:47 BF-H-MBP kernel[0]: System Wake
Aug 14 07:39:47 BF-H-MBP kernel[0]: IOUSBWorkLoop::closeGate - interrupt Thread being held off
Aug 14 07:39:51 BF-H-MBP kernel[0]: NVChannel(GL): Graphics channel exception! status = 0xffff info32 = 0xd = GR: SW Notify Error
Aug 14 07:39:51 BF-H-MBP BatteryUpdater[3590]: Battery does not need the BatteryUpdate v 1.2 (0x2)
Aug 14 07:39:51 BF-H-MBP lookupd[3588]: lookupd (version 369.6) starting - Tue Aug 14 07:39:51 2007
Aug 14 07:50:08 localhost kernel[0]: hi mem tramps at 0xffe00000
Can someone diagnose the problem based upon the above Console entries?
Thanks in advance!

Hi,
Thanks for taking time to post.
My question is different than the one your posting answers.
My question is, what is the diagnosis of the problem based upon the Console log entries that I've posted (rather than "How do I recover from the black screen?")?
Cheers!

Black screen on reboot from windows to mac?

Hello,
A black screen is stalking me... I'd be much obliged if anyone can help.
The problem:
I have Windows 7 installed with Bootcamp. Every time I shut down / restart from Windows to get to the Mac side, the chime rings, but the screen stays black. I can tell the Mac is running though, because of the sound I hear when I press the volume up/down keys on the keyboard. Then, at some point (5 - 30 - 60 mins later) the computer decides out of nowhere it's time to unveil the desktop... This never happens when I reboot from the Mac side (unless I force shutdown while the black screen is still there).
Things I tried that didn't work:
- Command-Option-P-R to reset NVRAM (worked once but didn't fix it, and now when I try the screen stays black)
- Resetting SMC
- Apple Diagnostics came back with no issues found (when I restarted after the diagnostics, I got hit with the black screen again...)
- Erasing the Windows partition and reinstalling it.
Things I should probably mention:
The mac is a late 2013 iMac, Intel Core i5 with NVIDIA GeForce GT 750M, running OSX 10.9.1
I apologize if this has an obvious solution I somehow missed, or if it was answered in another post.
Thanks for your time.

One way is to wipe the iPod clean and use it as a hard drive to carry the files over to the new comptuer. You must format the iPod in what's called Fat32, the older formatting for DOS. If you do this on a Mac, you use the Disk Utility to Erase the disk, and you choose MS-DOS for the format.
Then you plug in the iPod to the Mac, drag the iTunes Music folder to the iPod disk. Then you plug it into the Windows machine and drag the files to your iTunes folder there. See some instructions here:
http://docs.info.apple.com/article.html?artnum=300173
On the other hand, you might try using a 3rd party program that takes songs off the iPod. But Windows doesn't read the Mac files, I bet they won't help you move the music cross-platform.
Hope this helps...

Black Screen Error in Captivate 7

I'm hoping someone can help me out. I loaded a training course into Captivate 7 from powerpoint. I was having no issues at all, but now all of a sudden when I run the course from Captivate through Internet Explorer it stops at a certain slide and just goes to a black screen. I tried removing the slides and adding them back again but I get the same thing. All of the settings look the same on the slides before and after the black one....anyone have any ideas??

Please try these steps, or one of these:
Could you copy all slides from that project and paste them in a blank new project of same resolution, then publish and check that.
You can also hide few of the slides and publish in order to check which slide or object is corrupted.
To hide a Slide, right click on slide from the Filmstrip and click hide slide, then that slide will not be the part of the output. You can hide a group of slides or just one slide at a time, and keep publishing to investigate for the corrupted slide.
Have you got all slides created from that Power Point Presentation?
If yes, then could you create a new Project from that Power Point Presentation and Publish that one, if that works in IE?
Thanks.

Blue screen (BSOD) or black screen errors? Try these solutions.

If your laptop displays an error message on a black screen or "blue screen of death," and won't start up correctly, try the troubleshooting steps in one of the following documents: HP Notebook PCs - Error Messages Display on a Blue Screen during Startup or Boot (Windows 8, 7) HP Notebook PCs - Error Messages Display on a Black Screen during Startup or Boot (Windows 8, 7) Black screen/blue screen error message examples include: STOP error codes (hexadecimal codes beginning with 0x, such as 0x0000007F)A fatal exception has occurredIRQL_NOT_LESS_OR_EQUALA problem has been detected and Windows has been shut down to prevent damage to your computerYour PC ran into a problem and needs to restart

My Hp laptop blue screen want start with password

Apple TV blurry black screen when streaming from iMac?

My Apple TV shows a black blurry screen when trying to stream from my 2013 iMac. ATV works perfectly with iPad/iPhone but not iMac. Audio from iMac is fine, just no video. Both products are entirely up to date as far as software goes and restarting both + wifi hasn't achieved any results. Any **** would be appreciated, thanks.

I've found out it is an Mavericks 10.9.2 and 10.9.3 failure! Online I have found more people with the very same Problem, and all of them are running 10.9.2/3 - ON THEIR IMACS (different Models)!
My Apple TV and Streaming Services were functioning just fine 2-3 Monts ago, the only thing that changed was Updating my iMac Mid 2011 to 10.9.2 -> Then i've got the black screen when streaming, could not activate DisplayMirroring, when i played something in itunes or VLC the sound went through AppleTV but no video.
Then have checked it with iPad 2 = OK, iPhone 5 = OK, MBP Early 2008 with SnowLeopard = OK,
so i decided to Install an 10.9 on an external drive - and guess what? It works! Tried to Update (ComboUpdate) to 10.9.1 and it was still OK, got the BLACK SCREEN after ComboUpdate 10.9.2, and tried to Install 10.9.3 just to see if it will solve the problem -> NOT
this must be a joke!

Iphone4 Black Screen Error 1601 from restore.

Similar Messages

Maybe you are looking for