Iphone4 cant scroll , keeps talking and you have to double tap to do anything

iphone4 keeps talking , wont scroll and you have to double tap to get it to text an navigate

reset all settings
settings- general- reset - reset all settings
now reconnect to wifi
settings - wifi- click network name - enter password - join
if issue persists backup info and restore via itunes
Peace, Clyde

Similar Messages

  • My phone is in some mode where it will say everything i am trying to open and i have to double tap on it to open and wont scroll. whats wrong?

    my phone is in some mode where it will say everything i am trying to open and i have to double tap on it to open and wont scroll. whats wrong?

    You are in VoiceOver mode, you need to go into your settings>general>accessibility and turn off VoiceOver. 

  • Ipod nano 7th generation having issues with the UI. Out of box everything worked great. Once I snyc the device and it finished, the UI becomes unuesable. You have to double tap every icon in order to open music, videos, etc.  I cannot swipe to the second

    ipod nano 7th generation having issues with the UI. Out of box everything worked great. Once I snyc the device and it finished, the UI becomes unuesable. You have to double tap every icon in order to open music, videos, etc.  I cannot swipe to the second page of icons,  black box appears around an icon and then switches to a different one anytime I swipe. A box even appears around the time and battery power. iPod & iTunes are both updated. What is the FIX on this issue?

    I had this problem as well.  This is what I found by searching online.  I tried the fix on my nano 7th gen and it worked.  I hope this helps you.  Make sure to use two fingers for sliding and double-click the icons to get into settings.  Good luck.
    It would seem that Voiceover has been enabled on your iPod Nano. The following article contains information regarding Voiceover, and how to disable it once it's been enabled.
    iPod nano (6th generation and later): How to use VoiceOver
    http://support.apple.com/kb/HT4317
    To turn off VoiceOver on iPod nano using VoiceOver gestures
    From the Home Screen, swipe right or left with two fingers until you see or hear "Page 2 of 2" on iPod nano (7th generation) or "Settings" on iPod (6th generation).
    If the icons have been rearranged, or if there are more than four Home screens, you may hear something different.
    Slide one finger around the screen until you hear Settings. 
    Double-tap to open Settings. 
    Slide your finger up or down the screen until you see or hear General, then double- tap. 
    Slide your finger up or down the screen until you see or hear Accessibility, then double-tap. 
    Slide your finger up or down the screen until you see or hear VoiceOver, then double-tap. 
    Double-tap when you hear "VoiceOver switch button on." 
    You'll hear "VoiceOver off" to confirm the setting. Now you can use standard gestures to control iPod nano.
    Note: You can also turn off VoiceOver by resetting your iPod.

  • TS2634 my iphone 4s wont slide from one screen to the next and I have to double tap on an icon to make it work. How do I fix this??

    My iphone 4s wont slide from one screen to the next and I have to double tap on each icon to open it. I can hear siri talking and telling me what each icon or button I press is. How do I fix this problem? I have restored my phone to last saved but the problem still remains.

    My problem was fixed via your suggestion. Thanks. Then I heard, though it hasn't been substantiated by anyone I know, that pushing the the round "start" button after the unit is on three rapid times will solve the problem. Do you know if this is valid info?
    Message was edited by: wallyintouch

  • SInce upgrading to ios 7.04, my touchscreen is not working right. I cannot swipe anything, and I have to double tap on the icons to open them. The voice notifications will not turn off.

    I am having trouble with the ios7.04 upgrade. My touchscreen is acting funny. I cannot swipe anything and I have to double tap on the icons to open them up. I cannot scroll up and down. Please help!

    reset all settings
    settings-general-reset-reset all settings
    now reconnect to wifi
    settings- wifi- click network name- enter password - join
    if issue persists back up and restore as new via iTunes
    Peace, Clyde

  • HT201401 I have a voice speaking to me and i have to double tap the buttons. Also i cannot slide the screens. How do i get it back to normal.

    My phone has gone haywire. I have to double tap all the time. There is a voice talking to me. I cannot slide between screens. How do i get it back to normal.

    Do this, copied from page 143, iphone_user_guide 5.1 Accessibility features:
    Turn VoiceOver on or off: Go to Settings > General > Accessibility > VoiceOver. You can also set Triple-click Home to turn VoiceOver on or off. See “Triple-click Home” on page 153.
    You can turn individual accessibility features on or off in Accessibility settings on iPhone. You can also turn some features on or off in iTunes when iPhone is connected to your computer.
    Turn on accessibility features using iPhone: Go to Settings > General > Accessibility.
    Turn on accessibility features using iTunes: Connect iPhone to your computer and select iPhone in the iTunes device list. Click Summary, then click Configure Universal Access at the bottom of the Summary screen.
    Message was edited by: Ingo2711

  • Solution if iOS 7.1 keeps rebooting and you have 700+ Apps (4s)

    Hi,
    The iOS 7.1 update on my iPhone 4s 64GB made it reboot constinuously. I had to put it in recovery mode and restore a previous backup from iCloud; the phone was fine after restoring settings but it went again in its reboot cycle after downloading all Apps. I tried different backups and nothing changed, but I noticed that near the end of downloading Apps, the last ones disappeared! (while still being listed in Settings>General>Usage)
    The solution that worked for me:
    Recovery mode and restore a previous backup
    Once iOS 7.1 and the settings have been restored, remove Apps in excess of 500 before they have been downloaded.
    (I managed to keep 660 Apps but the last 160 disappeared before reapparing outside of folders, adding 10 full pages on the Home screen, hence previous crashes)
    The "X" to uninstall Apps will take quite some time to appear (maybe 10 minutes for me). If you need time to choose/review which one to uninstall, put your phone in Plane mode. Keep only 500 Apps (maybe 600 or slightly more could work).
    The phone will then be in iOS 7.1 and will not reboot continuously.
    Notes:
    - This solution is only for iPhones that keep rebooting after iOS 7.1 upgrade and with more than 700 Apps installed (and maybe iPhone 4s only).
    - If you have more than 500 Apps and haven't updated to iOS 7.1 yet, I advise you to keep only 500 Apps before doing the update.
    And if you have more than 700 Apps and the iOS 7.1 update went fine, please tell us (precise the number of Apps and your iPhone model to see if there is a trend or not).
    Hope it may help some people.
    Olivier

    My expirience is similar on iPhone 4 and iOS 7.1/7.1.1
    I have cca 550 apps, iPhone is often full, no empty space and because of that some apps are not fully downloaded and had just ghost icons.
    In that situation when I drained battery to 0% iPhone after charging started rebooting. Only recovery helped.
    Now it happened when iphone somehow rebooted accidentaly. It takes some tme before it restarts again. Its si vissible for some time in Itunes but backup is not possible because it reboots sooner or later.
    So I tried iTools app in work on Windows. I was able to export contact, notes and delete some apps. Home on Mac I can not get iTools list apps to delete more of them to get whether 500 apps limit would make difference.
    But from iTools I got thatnks to log viewer that there is some king of Springboard crash, icons missing and lot of other stuff I have no cluue off.
    Probably recovery will be only solution again. I reported that to Apple but not sure they will listen.
    I can not say it would happen under 7.0.x nor 6.x. I may not have so many apps before. Became apps fanatic later :-)

  • HT5858 I just recieved a new Iphone 5 and I have somehow deactivated the swipe action and now have to double tap every thing. I can not page down to see the complete page. And my phone will not turn off either. Please help me I have just had it for a few

    I can not swipe and when i go into general i can not page down to refresh. I have to tap once the tap twice to open up any apps on my phone or the make calls.
    Help me please

    Tap the Home button three times to disengage VoiceOver.
    Turn it Off at Settings > General > Accessibility > VoiceOver

  • My 6th gen ipod nano i have to double tap icons to enter and i have a grey 1 line boarder around my icons, how can i fix this? thanks

    i just recently got a new ipod back from apple because my other one had a hardware issue.
    i wasnt able to manually shut it off by holding the power down button, so i updated ipod and now that part works good. it still doesnt respond well to the touch screen part, i have to use two fingers to get it to slide through the icons and i have to double tap icon in order to enter, and there is an annoying grey boarder around everything now, and to scroll up and down i have to tilt the ipod and wait for it to scroll down by itsself.
    is this normal? anyway to get it back to the way my old one was, no grey boarders and it responded perfectly to my one finger touch.
    heres a picture of the boarder

    of course as soon as i post this question i find the answer on this website! it was in voiceover mode, i got rid of it by going into settings general accessibility voiceover. thanks to this website! so much better now haha

  • Have to double-tap home button TWICE to bring up iPod Control on 3.1.2 ?

    I noticed it takes more time for the iphone to wake up after I press the home button on 3.1.2 . Usually it's instant, now it takes roughly 1.5 second now. And I have to double-tap the home button twice (four times total)when I need the iPod Control(<<,>,>>), the phone doesn't respond to the first double-tap. It only wakes the screen up,then I have to do it again. This is so frustrating especially when I need to switch songs.
    BTW, this happens everytime when the phone is asleep for more than 20 seconds. If I double-tap when the phone has just been put to sleep (<20 seconds), the iPod Control comes up normal.
    And it's normal when it's connected to a PC, the screen wakes instantly.
    Anyone had this issue ?
    Message was edited by: Kashahayh
    Message was edited by: Kashahayh

    oh I get what you're saying now.
    unfortunately, you're not missing anything. that is how they have it set up in 3.0
    if you're unhappy with this design, give Apple feedback at http://www.apple.com/feedback/iphone.html

  • My phone keeps freezing and I have the 5s and now it won't turn on but I can talk to sir

    My phone keeps freezing and I have the 5s and now it won't turn on but I can talk to sir

    If you can talk to Siri, but the screen is not turning on, try the 2 button reset.  Press and hold the Sleep/Wake (Power) Button and the Home Button at the same time for at least 10 seconds. http://support.apple.com/kb/ht1430
    If that doesn't make you screen come back on, you can try restoring your iPhone. http://support.apple.com/kb/ht1414
    iPhone hardware troubleshooting - http://support.apple.com/kb/ts2802
    Display has no backlight or dark screen
    Toggle the ringer switch to see if the unit vibrates. If it does, it could be that iPhone is getting power, but is not displaying any image.
    Try turning iPhone off and then on again.
    While connected to the iPhone charger, try to reset the iPhone.
    If the low-battery screen appears, charge the iPhone.
    My issue is still not resolved. What do I do next?
    Contact Apple Support. https://support.apple.com/kb/HE57 or https://selfsolve.apple.com

  • TS2771 my ipod touch is stuck in a talking mode, and i have to double click everything and it wont scroll, and it tells me everything im doing

    my ipod touch is stuck in some kind of talking mode and wont scroll and i have to double click everything. how do i get it back to normal

    - Try triple clicking the Home button and then going to Settings>General>Accessibility and turn VoiceOver off
    - Next try connecting the iPod to the computer and going to the Summary pane for the iPod in iTunes. Click on Configure Universal Access and turn VoiceOver off.

  • My phone wont let me unlock it and siri keeps talking and saying everything i do

    My iphone 5 is stuck in a talking mode where siri keeps talking and wont let me unlock my phone she says the password out loud but wont unlock it. what do i do?

    It's not Siri. Sure sounds like you turned on VoiceOver.
    Turning VoiceOver On or Off

  • Could not save Preferences because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the 'Get Info' command in the Finder to ensure the file is unlocked and you have permission to access the file.

    I have this massage every time close ps cc
    Could not save Preferences because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the ‘Get Info’ command in the Finder to ensure the file is unlocked and you have permission to access the file. If the problem persists, save the document to a different file or duplicate it in the Finder.

    You may get better help in Photoshop General Discussion
    The Cloud forum is not about using individual programs
    The Cloud forum is about the Cloud as a delivery & install process
    If you will start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll
    If FINDER means Mac, read below (and try to give more information when asking a question)
    Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
    Enable Mac Root User https://forums.adobe.com/thread/1156604
    -more Root User http://forums.adobe.com/thread/879931
    -and more root user http://forums.adobe.com/thread/940869?tstart=0

  • Ive just updated my iPhone4 to the IOS5 software and i have lost all my apps? why? and how can i get them back?

    Ive just updated my iPhone4 to the IOS5 software and i have lost all my apps? why? and how can i get them back?

    When an iPhone updates, it wipes the whole device clean and then reinstalls the software and then the backup. Obviously you didn't create/couldn't create a backup either via iCloud or iTunes. You can get your apps back when you go to App Store>Updates>Purchased and download the apps you want.

Maybe you are looking for

  • Need help with inverter program

    I am very new to labview and I need a lot of help fast. I have been given this vi program, which I have attached, that operates a bunch of inverters. The program is driving the inverter which in turn drives the agitator on a washing machine. The agit

  • Alternative to Photoshop for Importing from Scanner (Mustek A3)

    Since Ps CS3 or CS4 it is not possible anymore to import directly from the Scanner. I bought a Mustek A3 Scan Express that works under VMWare Fusion/Windows XP and also came with drivers for Mac OS X. Unfortunately no scan software. It says "Use your

  • How can I improve playback of HD QT movie

    I created an HD Quicktime movie from FCP > Compressor that plays flawlessly on a new iMac at my local access station. The same file played from the same external Western Digital hard drive plays in a jerky, stuttering fashion on my G5 at home. I tran

  • Report field position

    hello I m using report 10g.. I want to move position of field at run time and also want to set elasticity at run time... can i do that? srw package doesnot support this. any other alternative?

  • First tab not getting "TabPanelTabSelected" class when tabs created from dataset

    Greetings all. I've got a tabbedpanel widget whose tabs are created with a spry repeat region. works great, except none of the tabs get the "TabPanelTabSelected" class on initial load. I tried setting the defaultPanel in the constructor, but to no av