Iphone4 connection with car bluetooth!!!

I just got an iphone 4 and can't get connected to bluetooth in my car. It says it's not compatable. My last phone worked fine so I must be doing something wrong. Any suggestions?

Thank you for your reply,
Do you think, that the solution is new update for Parrot device?
As I understand, you still have the problem and your hope is this update eventually.
Do you read somewhere something about this?
I have registration in Parrot forum, but I haven't read inside anything about the problem . It looks, that they never heard about it...

Similar Messages

Bluethooth connects with car bluetooth but no sound. This problem started after up dating to IOS 8.0.2. Any suggestion to fix the problem?

iPhone: 5s,
Problem started after IOS 8 up date.
Problem: Bluetooth connection with car indicated: connected.
               Incoming call: no sound (caller's voice) from car speaker.
               Out going call: no ring sound through speaker.
              At random shows calling but can not hangup & no ring sound.
Car: Infiniti G 37    2009.

I uploaded ios 8.0.2 on my iPhone 6 128 GB today 9-29-14 due to problems with Bluetooth talking to my ReSound Linx hearing aids to hopefully fix the problem. It sounds like the Bluetooth looses connection to the hearing aids and turns them off for about 1 1/2 minutes, then they come back on and I can hear again. I understand there are problems with Bluetooth and cars using the phone. I believe this Bluetooth problem is causing my hearing aid problem as my hearing aids connect to the iPhone via Bluetooth and the ReSound Smart App. I tried the reset fix, Settings>General>Reset>Reset All Settings as some have suggested but that did not resolve this issue either. I can't believe Apple is not talking about this ios 8.0.2 Bluetooth problem. This affects my everyday life in that I cannot hear when the Bluetooth drops.Try working with your hearing dropping every few minutes! If Apple wants in the Health field, I suggest they take their QA a little bit more serious than they are at present. Whomever was responsible for testing ios 8, 8.0.1 & 8.0.2 should be fired! This is causing more trouble than anyone can imagine. I understand the car - Bluetooth problem but think about the fact that if every time the Bluetooth drops, you can't hear.My job could be in jeopardy. I posted the problem to Apple Support and they will not even have the decency to respond with even a "we are sorry." How long do I have to go without being able to hear before Apple responds??????

3 g iphone rthat did not connect with bmw bluetooth in 3.1.2 and also 3.1.3

hi there
can you please tell me why my iphone has stooped working with my bmw bluetooth?
I have a 3g model and it was updated today to 3.1.3... and i was hoping that any bugs would have been resolved from version 3.1.2... which has not allowed me to connect with my bluetooth in my car since november...can any one help?????

Teonlee wrote:
My BMW dealer told me to downgrade the software. Can anyone tell how to do that?
tell him to stick to what he;s good at - selling cars - as you cannot downgrade.
3.1.3 works fine on a 2005 X5 btw.

New to the iphone, I cannot connect with the bluetooth to other devices, any help?

I have a new IPhone 4, I cannot connect with other bluetooth devices - any help??

What, exactly, are you trying to pair your phone with? These are the only supported bluetooth profiles:
http://support.apple.com/kb/ht3647

N95 Bluetooth connection with car

I drive an AUDI A6. Before I got my N95 I had a Sony/Ericsson i800. When I connected this phone with my car (Bluetooth), everything can be done from the car environment such as lookin for phonebook entries, selection of entries, dialing etc.
With my N95 I can connect with my car and I can use the hands-free speeking system ... but only this! I can't read any phonebook entry, calling list etc.
Is there any trick to open the phone directory for use in bluetooth mode?
Best regards and thanks in advance.
Sunni

Having just bought a new Audi A6 Le mans 3.0tdi quattro Avant - I was keen to find a solution to this bluetoth/phonebook problem. I too have the Nokia N95 and can confirm that the above link works 100%. Firstly you need to have Nokia PC Suite installed on you PC & phone .. then download the application and save to your pc. With your phone now connected to your pc.. download the saved application to the phone... [ make sure bluetooth is off and not paired to your car ]
Once installed on your phone - go to your car & connect/pair via bluetooth.... go to applications and run the application. It took a couple of minutes "processing " .... then switches to " transferring " ... again a minute or so.... Job Done.. My phone book is now integrated with the car and the MMI.
Thanks for the above link. http://europe.nokia.com/A4143881
It's the 2nd one down.....ie
Nokia 810 Contact Download Application for Nokia S60 3rd edition devices Download now
Nokia_810_Contacts_Download_S60_3rd.sis
103.80 KB | English
This contact download application enables you to download the contacts from the following Nokia phones to your Nokia 810 Car Phone via Bluetooth technology: Nokia E50, E60, E61, E61i, E62, E70, E90 Communicator, N71, N73, N77, N75, N76, N80, N91, N91 8GB, N92, N93, N95, 3250, 5500 Sport, 5700 XpressMusic, and 6290.Message Edited by audinut on 16-Oct-200703:19 PM

C7 - Bluetooth connection with car kit - problem

Hi all,
Can anyone help me about my problem. I bought new phone Nokia C7 with Anna software and I have a problem with pairing with my car (Bluetooth device Parrot CK3000 Evo). I think that the problem is with phone, because when I paired devices all things work well, but when I turn off the car (Parrot is switched off) and go away, other phones that I previously used disabled connection and can be used normally. But with this phone I see that for the phone connection still present (?!?) The car symbol on display still shown, and when I try to use the phone, I can make call, other people say that they receive calling , but I can't hear them, and they can't hear me. When I manually disconnect Bluetooth device, phone work normally, but when I am in the car again, two devices doesn't initiate pairing, and again I have to do this manually. It' a huge problem for me.
Is there anyone who have the same problem, or anyone who know how to solve this. I couldn't find option to solve this from menus.
Any ideas?
Unfortunately my warranty doesn't allow me to change software version from 022.014 to another... but if this will help...

Thank you for your reply,
Do you think, that the solution is new update for Parrot device?
As I understand, you still have the problem and your hope is this update eventually.
Do you read somewhere something about this?
I have registration in Parrot forum, but I haven't read inside anything about the problem . It looks, that they never heard about it...

Bluetooth phone connection with car

i have nokia n70 mobile , when i am trying to connect my mobile to my volkswagen car phone via bluetooth i get a massage ( no compatable phone found ) but when i try another mobile it is working . but i can connect my mobile with other bluetooth device like my wireless headset

Thanks. Worked perfectly.
<Personal information (email signature) removed for privacy per the Verizon Wireless Terms of Service.>
Message was edited by: Verizon Moderator

IPhone 4s No Longer connects to Car Bluetooth after iOS 7.1 Update

My iPhone 4s has been paired to our 2006 Acura TL hands free link (Bluetooth) and working flawlessly for more than a year. After the iOS 7.1 update installed on my iPhone the connection has been lost and the car's Bluetooth does not recognize, and will not pair with my iPhone anymore! I noticed there were two back-to-back updates for iOS7. The first one caused intermittent interruptions and lost connections with the iPhone. The second update completely destroyed the connection between the car bluetooth and the iPhone. Any ideas on how to correct this problem would certainly be appreciated. Thanks!

Hello algee1,
Thank you for the details of the issue you are experiencing with pairing your iPhone with your Acura.
In my experience, when updates are released for iOS devices, compatible devices release an update to maintain compatibility. Step 2 from the article below recommends checking with the manufacturer of your car stereo to see if there is a firmware update available for your car stereo:
2. Update software and firmware if necessary
Verify that both your car stereo and your device have the latest software versions. Contact the manufacturer to see if any updates are available. If your device does not have the latest version of the iOS, update to the latest software version.
I recommend reviewing the full article here for additional troubleshooting steps:
iOS: Troubleshooting car stereo connections
http://support.apple.com/kb/TS3581
I also recommend these steps if the issue persists after following all the steps in the previous article:
Unable to find nearby Bluetooth accessories
If a pairing record already exists, the device does not appear as discoverable. Try to connect the device using that pairing record.
If you are unable to connect using the existing pairing record, delete the record and pair again.
Ensure that the firmware or software on the Bluetooth accessory is up to date.
Ensure that the Bluetooth accessory is charged or connected to power.
Verify that the Bluetooth accessory is using a profile that works with the iOS device.
Turn off both the iOS device and the Bluetooth accessory, then turn both devices on again.
If the issue persists, test Bluetooth with another device or consult the manufacturer's documentation.
You can find the full article here:
iOS: Third-party Bluetooth headsets, headphones, and keyboards
http://support.apple.com/kb/ht1664
Thank you for using Apple Support Communities.
Best,
Sheila M.

Problem with car bluetooth after firmware update.

Hi, i have updated my N96 to 30.033. Phone is a lot faster then before which is good but where before it worked perfectly with my mitsubishi in car bluetooth (MMCS), now it still connects fine but it wont make calls, it just hangs untill you turn off bluetooth.
I have tried new pairings etc but it still wont make calls?
Anyone any ideas what to try next?
Thanks Baggy69.

No one any ideas ???

6220c - Cant pair device with car bluetooth?

I have been trying to pair my 6220c with my new car bluetooth (installed by factory in new car purchase, I dont know what brand).
I have tried other Nokia phones and they have worked perfectly, but I cannot for the life of me get mine to pair. I have checked all settings and everything seems fine but it still wont work.
Any ideas please?
Its a new phone and a new car so im desperate to get them to work together!
Cheers in advance

You did not say which car but most factory fitted car bluetooths can be very tricky to connect to.
For a start, I suggest you remove all previous pairings on both car and phone and start from scratch. Check that the bluetooth on the phoine and car are working by testing with other b luetooth devices. Also make sure you have the latest fiirmware on both car and phone. It would also be no harm to contact the car manufacturer for a list of compatible phones.

Issues with Car Bluetooth and the 9630

Hey guys,
Over at the crackberry forums there are many people reporting issues with the tour and car bluetooth. Basically, for people that are syncing the tour with the bluetooth in their cars, people can barely hear them. We can hear everyone just fine, but when talking the person on the other end reports that our voice is very low. This is happening on VZW, Sprint, Bell and Telus, which leads me to belive this is an issue with the OS itself. The link to the discussion at crackberry is http://forums.crackberry.com/f141/car-bluetooth-tour-issue-they-can-t-hear-me-well-267206/ I'm hoping someone from RIM cam comment on this or provide some help. This is a VERY frustrating issue to Tour owners especially with so many places having "hands free" laws.
Thanks!

Greetings from Charleston!
I was using a Verizon 8830 World Edition until I upgraded to the Verizon Blackberry Tour on launch day July 12. I never had any Bluetooth issues before and I'm not having any now. As a matter of fact, I would say the quality is a tad better. My volume is controlled by my car when the Blackberry is connected via Bluetooth and I've actually had to turn it down sometimes because it has been so loud. I drive a 2007 Toyota Landcruiser. I suspect it has less to do with the Blackberry than it does with the car. Perhaps there's a Bluetooth software/firmware update necessary for some of your vehicles?
All in all, I love this new Blackberry!!
Cheers!

How to prioritise connection of CAR Bluetooth PHONE system/ device over SmartBand Talk SWR30

After pondering about this device for over a month I asked my wife to gift it me for Christmas. For 3 days I really liked it, but then a critical flaw became apparent Having not driven for a few days due to the holidays I set off in my car, only to realise that I was not receiving telephone calls, SMS and other notifications on my built-in car bluetooth system (Ford Sync by Sony/ Microsoft), only on the Smartband Talk. Doing some research it became clear that if my SWR30 was already connected with my Xperia (Z2) my Ford Sync could not connect! I realise the limitations of Bluetooth (i.e. you cannot have simultaneous connections using a same Bluetooth profile) and the workaround is to manually turn off the Phone Audio (handsfree) Bluetooth profile for SWR30 in the Z2. Remembering to turn off/ back on is proving to be irritating and too much effort. I thought I might be able to create an Event (macro) in Sony's Smart Connect app to do this automatically, but this cannot be done as the app is rather limiting! It is more important for my car system to work with my Z2 as I use it frequently and is altogether a safer and more legal way of answering calls etc. Has any one got ideas or suggestions? I really like this SmartBand (its far sleeker & lighter than true smartwatches) and I actually want the talk feature, but if I cannot resolve the car bluetooth problem (and this will probably affect all other Bluetooth car systems/ devices) easily and smoothly, regretfully, the SWR30 will be going back to the seller

As stated before, I really like the SmartBand Talk and was very disappointed to learn that it could not coexist with a car Bluetooth system! Having had a few days off between Christmas and New Year I was determined to resolve this "flaw" and am glad to report that I have and in a slick way! Prompted by "ensaro's" widget suggestion, unfortunately I did not want a toggle which had to be manually executed, it had to be automatic. So I thoroughly researched the Google Play Store, trying out many, and ended up with 2 apps which were real contenders: Trigger (by Egomotion) and Automagic (by Gridvision). Both apps basically allow you to create a trigger (eg Bluetooth Car Audio wants to connect to phone) followed by an action (eg switch off Bluetooth phone connection to SmartBand, followed by switch on connection to Bluetooth Car Audio). Trigger calls this automation task a Trigger, Automagic calls it a Flow.Trigger is fairly intuitive visually, but unfortunately support for this supposedly highly rated app seems no longer to exist! This became very frustrating for me as at times it would not run (however, it also allows a widget to be created to manually run the task manually)... therefore I dug in to the more heavyweight Automagic! Automagic uses a dynamic flowchart, where you add a trigger, an optional condition (true/ false) and finally action(s). The style reminded me of my programing days many years ago and the logical nature excited me. The possibilities are huge and may scare off some users looking for a quick result, but in fact it is really quite easy to use, especially once you undertstand some of the slightly "obscure" terminology used (after all this a German programer at work and some translation suggestions may be required). At the end of the day I created 2 flows, one to connect to the car system (via disconnection of SmartBand and then connection to my car) and one to reconnect to the SmartBand when not in car (the trigger being that the car Bluetooth is no longer connected/ disconnected). These flows are passive and apparently use very little battery power, executing when a trigger condition is matched and so far is working well. If anyone wants to see how my flows are constructed, I will be happy to email them. You open them up directly in Automagic (going to their site allows you to download a 9 day trial with up to 3 flows working)... my flows are embellished with extra actions, such as switching off WiFi and playing a sound when a connection has taken place... and most important of all there is a forum with lots of help and examples and I was really happy when the progaming author, Martin, actually replied to a query... Problem... sorted! Automagic is well worth £2.40 ...

Iphone connectivity with car

I just upgraded my Iphone 3Gs with the ios 5 software upgrade. My phone is synced with the bluetooth in my car. Since the upgrade no sound comes through. What's wrong?

I dont have a problem with my bluetooth at all - once paired, it works like a champ. My issue is the usb connection., . .
I have the 2011 Altima 2.5 SL Coupe with Nav / iPhone 4, iOS 5.0.1
When I leave my iPhone plugged in - say I run into a "stop & rob" for a minute, when I come out, the song will continue to play for 1 second and then stop. The only way I can get it to restart is to unplug the phone and plug it back in.
If I plug in my phone before I start the car, the same thing happens.
If I plug in my phone before it connects via Bluetooth, the same thing happens.
The only way I can get the iPhone to work is if I wait a good 10 - 15 seconds after I start the car. I am usually rolling down the road by then.
I know it is not a Nissan problem because I used my son's old iPod (30gb) and it works great (except it does not pause the music when I turn off the car)

Synching iPhone contacts with car Bluetooth.

I have a MB GLK 350 and an iPhone4 with iOS 5. Each time I try to synch up my phone contact list with the bluetooth device, it disconnects from the bluetooth. I can use the phone on hands free if I select a contact but it will not download the contacts. Can anyone help me address this issue?

If the system supports the PBAP (Phone Book Access Protocol), contacts will upload automatically. If it does not, you can not transfer your contacts to the system.
Check the documentation for your in-car system.

N86 8MP will not pair up with car bluetooth

Hello / Hi. This is THE most frustrating and annoying time I have spent with a phone, and it makes me doubly detremined to go 'anything but Nokia' in the next few months.
Anyway, my N86 8MP is under warrantee so when it broke last week, the Australian Nokia Care people replaced it - and I picked it up today. Got to my car and the darned phone will not pair up to the bluetooth in my car. This is the second time I have had problems pairing up with this phone - the first being when I got the N86 five months ago.
N86 Phone will find all kinds of 'devices' including the Parrot Bluetooth in my VW car - it just will not 'pair'. Now have about ten 'devices' on my N86 that it found while doing what the downloaded N86 instruction manual told me to do, and cannot delete any of them. What I am copying and pasting below, taken from page 56 of the Nokia manual, just is NOT possible. I mean one is not able to Delete any fool thing - there isn't even a 'delete' option on my phone.
To delete a pairing, select the device whose pairing you
want to delete and Options > Delete. To delete all
pairings, select Options > Delete all. If you are currently
connected to a device and cancel the pairing with that
device, pairing is removed immediately, and the
connection is ended.
I have updated the phone software this evening - when supplied new to me by Nokia Care this morning, the phone was about two or more years behind in terms of software - but after downloading some 35 Mb an hour or two ago, it now has the latest version 30.009. STILL I cannot pair my bluetooth. STILL I cannot delete any of the devices my phone found earlier today.
Oh, by the way, I have tried three other brands of phones and all pair up with my car bluetooth. So it's not the bluetooth device.
I cannot tell you how frustrating it is to have a new phone that dissapoints me as much as the one it replaced. Oh, Nokia replaced my previous N86 because it wasn't charging the battery properly.
But I ned to get this fool phone to work - at least for now. And it is SO frustrating when the
Nokia N86 8MP User Guide Issue 3.0 does not help - AND tells you to do things that my phone just cannot do - like go into Options Delete, when it doesn't exist.
So how DO I delete all the devices my phone found?
And how DO I get my phone to recognise and pair with my car bluetooth?
Please help.
Thank you SO very much.
Pete

Hi ganesh8888
Unfortunately the UDP = User Data Preservation feature of your device is working to your disadvantage here, whereas in days of old a firmware update would have wiped out settings. Provided that you backup essential data first you can then hard reset - hold the following buttons * (star key), 3 (number button) and green (phone key) depressed and power on whilst keeping these three keys down until after Nokia "shaking hands" appears. This should return device to out of box state showing "select country".
Unfortunately you don't say which Parrot Bluetooth you are using but as example support here:http://www.parrot.com/tur/musterihizmetleri/musterihizmetleri/parrot-sk4000/compatibility/?idproduct...
Happy to have helped forum in a small way with a Support Ratio = 37.0

Iphone4 connection with car bluetooth!!!

Similar Messages

Maybe you are looking for