Iphone4 fails to connect to AppleTV very often

hi..my iphone4 fails to connect to my AppleTV very often. Sometimes it gets connected without i doing anything. Sometimes even if try connecting through the i remote, it looks for the Apple TV and then says turn on Home Sharing. My Home sharing is always on. Funny thing is sometimes when i open you tube etc, it already shows the Airplay icon. Other times (When i really need it), the Air Play icon is missing....Pls help.

A Gen4 TC should not run too hot.. yes, when backing up with the disk running for extended periods then they do run pretty hot.. but once the disk spins down they should cool off..
Is the disk spinning down?? Stick your hand on it and feel... stick your ear over the fan area.. right behind the power socket and listen if the fan is running.. on a gen4 it should.
Raise the TC on pencils or chop sticks or erasers or bottle tops.. make sure it doesn't sit on the bench.
If you are running the latest firmware.. go back. In fact on a 12month old TC you might be able to go back to 7.5.2 firmware. (hold the option key when you select firmware updates, to show all possible updates and downgrades.)
The latest firmware offers nothing but trouble.. for the vast majority of people.
Do you still have AppleCare on a computer.. that will cover your TC as well. Take it back to Apple if you are worried..
There is no difference whatsoever between the two model TC except the size of the drive.

Similar Messages

My Connection broke down very often

Hi,
I am using MS-Excel 2013 with Power Querry 2.1 , I ma having an operating system Windows 8.1 (64 bit) and I am using the MySQL connector (mysql-connector-net-6.7.5)
My problem is I am able to connect to a MySQL database after providing the credentials but after an interval of time (5-10 mins of idle situation) the connection broke down and I have to connect to my DB again and again.... if the process happened at the
back-end then it's okay but the excel seems to be crashed and I have to connect everything again
Is there some solution for this issue..
looking forward to hear back some positive results
Thanks and regards

I don't understand this because we don't keep any connections open; we open one when we want to run a query and we close it again immediately afterwards. Is there a specific error messages you're getting?

Sdlc interface down very often

Hello,
In my customer site, SDLC device connect to 2600. IOS version is 12.0.7T. Then access AS400 through DLSW function. We showed log and found the connected interface down very often. show log as below.
We checked AS400 log and didn't find the SDLC device inactive ever. And we check SDLC device, the device work well, user didn't find any problem??
We don't know why always log of message showed the interface down.
Anyone can help me??
.Jun 23 08:29:56 Taiwan: %LINK-3-UPDOWN: Interface Serial1/0, changed state to down
.Jun 23 08:29:57 Taiwan: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0, changed state to down
.Jun 23 08:30:01 Taiwan: %LINK-3-UPDOWN: Interface Serial1/0, changed state to up
.Jun 23 08:30:02 Taiwan: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0, changed state to up
.Jun 23 08:33:06 Taiwan: %LINK-3-UPDOWN: Interface Serial1/0, changed state to down
.Jun 23 08:33:07 Taiwan: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0, changed state to down
.Jun 23 08:33:11 Taiwan: %LINK-3-UPDOWN: Interface Serial1/0, changed state to up
.Jun 23 08:33:12 Taiwan: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0, changed state to up
.Jun 23 08:36:16 Taiwan: %LINK-3-UPDOWN: Interface Serial1/0, changed state to down
.Jun 23 08:36:17 Taiwan: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0, changed state to down
.Jun 23 08:36:21 Taiwan: %LINK-3-UPDOWN: Interface Serial1/0, changed state to up
.Jun 23 08:36:22 Taiwan: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0, changed state to up
.Jun 23 08:39:25 Taiwan: %LINK-3-UPDOWN: Interface Serial1/0, changed state to down
.Jun 23 08:39:26 Taiwan: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0, changed state to down
.Jun 23 08:39:30 Taiwan: %LINK-3-UPDOWN: Interface Serial1/0, changed state to up
.Jun 23 08:39:31 Taiwan: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0, changed state to up
JSB025a#sh inter se 1/0
Serial1/0 is up, line protocol is up
Hardware is CD2430 in sync mode
Description: connect to SNA pu2.1
MTU 1500 bytes, BW 128 Kbit, DLY 20000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation SDLC, loopback not set
Half-duplex enabled.
cts-delay 0 milliseconds
dcd-txstart-delay 100 milliseconds
dcd-drop-delay 100 milliseconds
transmit-delay 0 milliseconds
Errors - 0 half duplex violation
Router link station role: PRIMARY (DCE)
Router link station metrics:
slow-poll 10 seconds
T1 (reply time out) 3000 milliseconds
N1 (max frame size) 12016 bits
N2 (retry count) 20
poll-pause-timer 10 milliseconds
poll-limit-value 1
k (windowsize) 7
modulo 8
sdlc vmac: 4000.2625.01--
sdlc addr 01 state is CONNECT (xid-poll)
cls_state is CLS_IN_SESSION
VS 5, VR 0, Remote VR 5, Current retransmit count 0
Hold queue: 0/200 IFRAMEs 116636/58170
TESTs 0/0 XIDs 40235/14460, DMs 6784/6736 FRMRs 0/0
RNRs 7/0 SNRMs 9757/0 DISC/RDs 9733/0 REJs 0/0
Poll: clear, Poll count: 0, ready for poll, chain: 01/01
Last input 00:00:00, output 00:00:00, output hang never
Last clearing of "show interface" counters 9w3d
Queueing strategy: fifo
Output queue 0/40, 0 drops; input queue 0/75, 0 drops
5 minute input rate 0 bits/sec, 50 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
156063821 packets input, 318338246 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
11 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 11 abort
155708948 packets output, 337016303 bytes, 0 underruns
0 output errors, 0 collisions, 43092 interface resets
0 output buffer failures, 0 output buffers swapped out
106807 carrier transitions
DCD=up DSR=up DTR=up RTS=down CTS=down

Hi,
I believe that your line keeps bouncing due to Data
Carrier Detect(DCD) going down. I didn't see a copy
of the interface config but do you have the following
command under your interface?
half-duplex controlled-carrier
This in conjunction with the dcd-txstart-delay and
dcd-drop-delay settings will cause the DCE to drop
DCD frequently.
These are for very specialized environments which
probably are not what you have.
What is your environment, with respect to the
connection to the AS/400? Is it just a Cisco DCE
cable connected to an AS/400 cable? Or are there
other cables/switches/modems involved?
If you just have the Cisco DCE cable connected to
the AS/400's cable then you do not need that command.
Otherwise, it is possible you have a cable or
physical interface problem.
Please include your interface's config if this
information wasn't enough to resolve the problem.
Thanks and regards,
Ed Mazurek

HT201412 After ios7, My iphone4 has gone dead twice in a time frame of around two months...even though its not happening very often but a two month Old phone going dead just after a New update is not acceptable.probably ios7 still has sum bugs dat need to

After ios7, My iphone4 has gone dead twice in a time frame of around two months...even though its not happening very often but a two month Old phone going dead just after a New update is not acceptable.probably ios7 still has sum bugs dat need to be fixed...Can this bug expected to be fixed in the next update...

Hi 1283ar.
Unfortunately, iOS 7 is too hard to push for the iPhone 4 and therefore has a lot of effects turned off to try to get it to run as smoothly as possible.
However, it becomes better and better with each update coming but it's hard to do anything about the hardware on an already released phones.
If you still have trouble or think they are too hard. My tip is, if so, to restore your iPhone 4 and make a clean setup with no iCloud backup. But all your photos in a photostream so you can access it later.

OfficeJet 8600 Pro: WiFi connection severed very often / Printer cannot reconnect

Hi there,
My printer´s connection to my wireless network is severed very often so I can´t use network print, scan and HP ePrint service. When I try to reconnect, the printer shows an error message. I printed a diagnosis page showing an error:
settings -> no filtering -> error (I´m a German user and translated that headword from German into English, maybe it´s not translated properly).
I tried following:
-checked if router firmware is latest: it is!
-checked if printer firmware is latest: couldn´t find the option but it installed one update when I set up the printer first time in November
-restarted router and made a reset of printer network settings: once it helped, now id did not
I just now took a look on my printer and saw it suddenly was connected to my network. Although I think it´s a question of time till next connection abort.
My OS is Windows 8 with latest updates installed. My router is a model of a leading German router manufacturer (AVM Fritzbox).
I hope HP will publish a firmware udate to fix that annoying bug. I can´t believe it´s a problem of my router because all my computers don´t experience connection aborts.
Kind regards,

Hello sentinel717,
There are several factors that can cause your printer to lose its wireless connection, including, but not limited to:
The network connection is no longer active, or has a low signal strength.
The HP product goes into Sleep Mode or Standby Mode.
The HP product is moved out of range of the wireless router.
Check out the linked article below for troubleshooting you can do to resolve the issue:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02817031&cc=us&dlc=en&lc=en&product=4323652&tmp...
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

M30X-125 cooling fan is running very often if USB device is connected

Hello,
I have used USB devices with my M30X-125 for a few months and noticed that as soon as I connect a USB mouse or printer with external power supply the fan cooling works very often.With no USB device the fan cooling is very "quiet".
I updated the BIOS with the last 1.90 release and changed parameters (reduce processor speed) of the Power Management Utility.No effect on this fan cooling issue.
Can you help me please to limit fan cooling work with USB device connected?
Regards

Hi Phil
I agree with you but I believe that it is not easy to make a optimum there. If you check other notebooks from different producers the cooling vents are not so quiet. Like you know the units are designed to be small and a lot of hardware is placed at small place. The warmness is very high especially if the CPU activity is high and the units must be cooled before the hardware can be damaged.
I have tested cooling method intensively with my unit (Tecra M1) and if the cooling method and CPU activity is set to lower level the unit doesnt run like I want. Because of that I can live with sporadically running cooling fan but the performance is fantastic and all running processes flow smoothly.

I have a iMac 21.5", with cordless mouse, very often it shows "not-connected" or "connected", at its will, we can't do anything. Changed the battery, no improvement. Now fixed another wired mouse to the system to work. My wire less keyboard working well

I have a iMac 21.5", with cordless mouse, very often it shows "not-connected" or "connected", at its will, we can't do anything. Changed the battery, no improvement. Now fixed another wired mouse to the system to work. My wire less keyboard working well

Make the device a favorite.
Also, I would reset the PRAM and SMC.
Barry

Very very urgent : ERROR collaxa ProcessJob::execute Failed to connect

Hi ,
When am starting the Server with opmnstarll its not starting and giving the following error, if anybody
faced this before please reply the solution which you followed asap.
<ERROR> <collaxa> <ProcessJob::execute> Attempt (1/30) ... failed to connect ...retrying in 15 seconds
thanks
JR.

Hi,
I think this problem is described in http://download-uk.oracle.com/docs/cd/B31017_01/linitan.1013/relnotes/install.htm :
2.1.18 OPMN Configuration Assistant Fails during Installation on NFS Storage
While starting up the BPEL process, the Oracle Process Manager and Notification Server (OPMN) Configuraton Assistant fails and the following error message is displayed:
<2006-11-08 03:51:07,096> <ERROR> <collaxa> <ProcessJob::execute> Timed out
reading http://iwin6509.us.oracle.com:8888
<2006-11-08 03:51:22,099> <ERROR> <collaxa> <ProcessJob::execute> Timed out
reading http://iwin6509.us.oracle.com:8888/orabpel <2006-11-08 03:51:37,124> <ERROR> <collaxa> <ProcessJob::execute> Timed out
reading http://144.25.145.91:8888/orabpel
<2006-11-08 03:51:52,127> <ERROR> <collaxa> <ProcessJob::execute> Timed out
reading http://iwin6509.us.oracle.com:8888/orabpel
<2006-11-08 03:52:07,131> <ERROR> <collaxa> <ProcessJob::execute> Timed out
reading http://localhost:8888/orabpel
<2006-11-08 03:52:07,132> <ERROR> <collaxa> <ProcessJob::execute> Attempt
(1/15) ... failed to connect ... retrying in 5 seconds ...
<2006-11-08 03:52:27,176> <ERROR> <collaxa> <ProcessJob::execute> Timed out
reading http://iwin6509.us.oracle.com:8888
<2006-11-08 03:52:42,179> <ERROR> <collaxa> <ProcessJob::execute> Timed out
reading http://iwin6509.us.oracle.com:8888/orabpel
<2006-11-08 03:52:57,182> <ERROR> <collaxa> <ProcessJob::execute> Timed out
reading http://144.25.145.91:8888/orabpel
<2006-11-08 03:53:12,185> <ERROR> <collaxa> <ProcessJob::execute> Timed out
reading http://iwin6509.us.oracle.com:8888/orabpel
However, this issue only occurs while installing the SOA suite on NFS/NAS storage.
To workaround this issue, set the timeout value to 1200 or higher in the opmn.xml file. Following steps describe how to set this value:
1.
Start the installation using runInstaller.
2.
Increase the value of start timeout to 1200 for the oc4j instance in the ORACLE_HOME/opmn/bin/opmn.xml file. For example,
<start timeout="1200" retry="2"/>
3.
Run root.sh to continue with the installation.
Regards, Gerwin

Problem with update MUSE CC 2014.2 (october 6). after upgrading to the new version of Muse crashes very often (out without notice).

Problem with update MUSE CC 2014.2 (october 6). after upgrading to the new version of Muse crashes very often (out without notice).

HELP! i can't get ANYTHING done in the new muse - keeps closing. once it crashes - i can't get the file back open!
i've lost all my work!
from my desktop - when it stared happening was with the updated version:
Logging in build 2014.2.1.10 started at: Mon Nov 03 13:36:38 2014
========================================
[00:00:42.416] Opening file '\\D-LAPTOP\_websites\dsbees muse\dsbees.muse' with status:success size:9797632 mod Date:Tue Sep 23 15:51:42 GMT-0500 2014 highestUID: 3548
[00:01:03.898] Preparing to Save As over "\\D-LAPTOP\_websites\dsbeesTWO\dsbeesTWO.muse" exists: true
[00:01:17.516] SaveAs complete for file '\\D-LAPTOP\_websites\dsbeesTWO\dsbeesTWO.muse' file size:9830400 mod Date:Mon Nov 3 13:37:51 GMT-0600 2014 highest UID:3551
Build 232: Mon Nov 3 19:41:03 2014 UTC: Error: CSI: OOBE: Serial Number: Error Code: O-10 Error Message: Unable to retrieve the serial number (Note: this may not be an error)
Build 232: Mon Nov 3 19:41:03 2014 UTC: Error: CSI: OOBE: Serial Number: Error Code: O-10 Error Message: Unable to retrieve the serial number (Note: this may not be an error)
Build 232: Mon Nov 3 19:41:07 2014 UTC: Error: CSI: OOBE: Serial Number: Error Code: O-10 Error Message: Unable to retrieve the serial number (Note: this may not be an error)
Build 232: Mon Nov 3 19:41:21 2014 UTC: Error: CSI: IMS: Connect: Error Code: I-200 Error Message: No Account
Build 232: Mon Nov 3 19:41:21 2014 UTC: Unknown IMS error 'SHARED_NOACCT_ERROR' has occurred when retrieving IMS token.
Build 232: Mon Nov 3 19:41:57 2014 UTC: Opening file '\\D-LAPTOP\_websites\dsbees muse\dsbees.muse' with status:This Adobe Muse site file requires a newer version of Adobe Muse. Please update to the latest version. size:9797632 mod Date:Tue Sep 23 15:51:42 GMT-0500 2014
Build 232: Mon Nov 3 19:41:57 2014 UTC: This Adobe Muse site file requires a newer version of Adobe Muse. Please update to the latest version.
Logging in build 2014.2.1.10 started at: Mon Nov 03 13:43:17 2014
========================================
[00:00:21.481] Opening file '\\D-LAPTOP\_websites\dsbeesTWO\dsbeesTWO.muse' with status:success size:9830400 mod Date:Mon Nov 3 13:37:51 GMT-0600 2014 highestUID: 3551
[00:00:30.373] AssertInDebug: Unable to run recovery. User file remains locked after 5 second pause.-assertInDebugOnly+DataBase/recover+MuseSite$/recover+MethodInfo-2886+DataBase$/run Recovery+apply+UIComponent/callLaterDispatcher2+UIComponent/callLaterDispatcher+end stack
[00:00:30.404] Failed to recover file:\\D-LAPTOP\_websites\dsbeesTWO\dsbeesTWO.muse
[00:00:30.420] Calling openConnection for file that doesn't exist? C:\Users\Owner\AppData\Roaming\com.adobe.AdobeMuseCC.2014.2\Local Store\Recovery\JXRoDn335LE0UosOdoStnQ Parent folder exists.
[00:00:34.429] open of SQL connection failed for C:\Users\Owner\AppData\Roaming\com.adobe.AdobeMuseCC.2014.2\Local Store\Recovery\JXRoDn335LE0UosOdoStnQ
[00:00:34.429] Failed to open mini-save connection B "C:\Users\Owner\AppData\Roaming\com.adobe.AdobeMuseCC.2014.2\Local Store\Recovery\JXRoDn335LE0UosOdoStnQ" Doesn't exist. Folder exists. error:SQLError: 'Error #3125: Unable to open the database file.', details:'Connection closed.', operation:'open', detailID:'1001'
[00:00:34.429] EXCEPTION:[SQLC/internalOpen] SQLError: 'Error #3125: Unable to open the database file.', details:'Connection closed.', operation:'open', detailID:'1001'-SQLConnection/internalOpen+SQLConnection/open+DataBaseConnectionWrapper/o penConnection+MethodInfo-28954+EventDispatcher/dispatchEventFunction+EventDispatcher/dispa tchEvent+MethodInfo-28938+end stack
[00:00:34.445] AlertAndExit because of: [SQLC/internalOpen] SQLError: 'Error #3125: Unable to open the database file.', details:'Connection closed.', operation:'open', detailID:'1001'

TS1398 iphone 5 and sky hub? My phone connects intermittantly and quite often cannot find the network. Also does not reconnect automatically? Any ideas?

My phone connects intermittantly and quite often cannot find the network. Also does not reconnect automatically? Most of the time says unable to join network? My laptop and ipad seem fine? Very annoying Please help!

All the information you need is right here: http://www.apple.com/iphone/specs.html
Notice there is no mention of WiMax.
It doesn't really matter anyway as Sprint is rolling their WiMax network down for use by MVNOs. Actual Sprint customers will not have access to WiMax at all. It was a failed experiment.

Screen Sharing Failed to Connect Please Try Again with different credentials

Very strange behavior from Screen Sharing - which I have been using across multiple Mac system and OS versions for years. I have one system that is 10.8, several that are 10.7 and a 10.6. Most of the time it works as expected - the weird thing is that every so often I get a failure and please try different credientials but that do not get any way to enter other credientials.
Even stranger - sometimes - after failing to connect mulitple times - if I connect with LogMeIn - then Screen Sharing works.
In some cases I am able to connect no issue - then disconnect - and opps need to check something else and unable to reconnect.
I have looked in KeyChain access - and preferances - and other places - cannot find where Screen Sharing is storing info bits that might need deleting to clean things up.

Perhaps stranger still - one of the systems - a Mac OS X Server 10.7 - which is headless - had not been rebooted for nearly 100 days - so I rebooted it - and no can connect to all remote systems on the first try - repeatedly - even though I have not changed anything on or rebooted any of the others. And the OS X Server is NOT my domain, or DNS server.
except now Time Machine is not finding the backup disk on the server - which has been workign for the past year - and I did not delete the time machine stored keychains. ugh.

My iphone 5 won't make a call when i fail to connect to the internet via 3g

My iphone 5 won't call when i fail to connect to the internet via 3g.
At work i dont have wifi i have 3g, if i launch say the sky go app,or the iplayer, sometimes they work and everything is fine...sometimes they wont load as 3g for whatever reason cant get a connection at that particular time........ if i then try and make a call the call will fail. I've experimented 25 + times and this is definately the cause.
(note: when the 3g connection does work, the phone has absolutely no problem calling people)
Anyone had this problem?
Even better has anyone got a solution?
Thanks,
Nick.

Are you sure that the carrier's signal is strong where you are having this problem? Certain building structures and locations have poor cellular signal strength and this often results in the "No Service" indication. Are other users able to get service in the same locations where you have problems?

My iphone 3g stays on the apple logo for about 4 minutes then flashes white and goes back to the apple screen, it repeats untill battery is flat, every now and then im lucky enough to get it to turn on but not very often and then it freezes and repeats??

hello my name is kirstie, i updated to firmware 4.2.1 .....my iphone 3g stays on the apple logo for about 4 minutes then flashes white and goes back to the apple screen, it repeats untill battery is flat, every now and then im lucky enough to get it to turn on but not very often and then it freezes and repeats the same problem?? (if i turn the phone off my pressing the two buttons it wont keep rebooting, its only when i leave it after turning it on)
I have reset the phone, full firmware restore, even downgraded back from firmware 4.2.1 to .3.1.3 official by using dfu mode and still doesnt fix.
(i correctly got out of dfu mode after the downgrade)
i can enter dfu mode and recovery, and update through itunes with no problem, but it doesnt fix the problem,
i have searched and found no answer to this problem, every option availible to try that i know of i have tried and failed. i dont care about preserving my content i just want a fix. i have a good understanding how to operate software on a computer and shouldnt be too confused by any advice given, so plz even if the answer is very complex i wish to try anything, please help me to get my iphone working.

Anyone have any suggestions? or is everyone else just as clueless as me !

What am I doing wrong that I can't connect to a very remote computer?

Maybe I just don't understand the definition of "remote" but I can connect to computers on my local Ethernet network, but when I attempt to connect to my dad's computer a thousand miles away, I get a "disconnected" or "offline" comment. He has Safari and Mail active, and we are looking at each other through iChat, so I KNOW he's online.
He's 84 years old, and the communication is killing me, but I've had him turn on all the permissions in Sharing, so I can't figure out why I can't get on his machine. He's got a new iMac/Intel box, and I'm running a G5; we're both running 10.4.7.
When I "edit" his information, very often the address turns from the number I've entered to "0.0.0.0." and I can't change it. Our IP numbers are only different by 50 in the last set, which seems odd to me, but I'm ignorant!
According to the Sharing panel, the IP address is supposed to begin with "afp://" but that gets stripped out when I enter it - in fact, sometimes (but not always) it won't let me enter the slash marks.
I'd appreciate any info you guys can give me.
Thanks!

what's this about 'consumer hubs'?
i've tried almost every trick i've read, short of doing a complete dump and re-install of all software. i just can't get connected to someone over the internet. could it be their service provider doing the blocking?
as i've only tried connecting to one other person's computer in one area of the globe it's difficult to say what the problem is.
here's a thought for apple - have a dummy site (for us dummies) that we can access using ard, thusly allowing us to test our own settings to make sure the problem doesn't reside with us.
any help would be great.

Device Manager HP Printer ! Symbol, Windows "failed to connect" Sound- Yet Printer Works

Every startup, I hear the Windows "device failed to connect" sound. How can I get rid of this?
I have an HP J6480 Printer with WIn 7. Device Manager is not recognizing the printer driver.
Under Device Manager, the printer is listed with the ! error symbol. No other devices have an error symbol. Yet the HP Solution Center and printer work.
1) I have tried fresh installs of the current HP Full Feature Software.
2) I have tried the HP Uninstall program, going through all five Uninstall programs two times.
3) I have run CCleaner to clear registry issues.
4) I have tried deleting the Device Manager "Officejet ! J6400 series" entry. The Solution Center and the printer then do not work. Apparently, Device Manager recognizes the printer but not the driver. I have to go to "Programs", "HP", then "Officejet J6400 Series" to reinstall the software.
5) I have tried to get Device Manager to recognize the software. When I click on "! Officejet 6400 series", I get the message "the drivers for this device are not installed (code 28)". If I then click on "Update Driver" and select" Browse my computer for driver software" then click on "Browse "C:\Users\Myname\Downloads", where I have both the HP 13.0 Full Feature Sofware Software and the Basic Print and Scan Driver files, it says "Windows cannot find driver software". If i click on "Search automatically for driver software" I get the same message.
I would very much appreciate any ideas! Thank you!
This question was solved.
View Solution.

Friendlycomputr,
Your persistence is admirable! I totally understand you just want it working properly. I really appreciate the updates, I am going to look into this and get back to you as soon as I can!
Thanks again
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Iphone4 fails to connect to AppleTV very often

Similar Messages

Maybe you are looking for