Iphone4 "Mobile Data" Tab

Hello,
Aplogies in advance for my ignorance in technical matters... I have purchased an iPhone4 in the UAE, independently from the local Carrier, so i assumed unlocked?. When I go to Settings/Network/ I see a tab named "Mobile Data" that I can only turn ON or OFF. It does not offer me any other option f I turn it ON. Also, I do not have any "Cellular Data" button. Is that a problem and should I worry abouth that? My phone seens to be working very well. I do not have Face Time either, but I assume it is becuse my SIM card is from the UAE? Please advise. Thank you :-)

Try a reset: hold down the home button along with the sleep/wake button until you see the apple, then let go.

Similar Messages

My iphone4 says its cinnected to 3g but when i use safari it says "could not activate mobile data network". Any ideas please?

my iphone4 says its cinnected to 3g but when i use safari it says "could not activate mobile data network". Any ideas please?

Further, if you are not in your home cellular carrier's area, you need to set Settings > General > Cellular > Data Roaming = "On".

HT4623 My App Store won't load up the updates tab until my mobile data is switched off?

My App Store won't load up the updates tab until my mobile data is switched off?

My App Store won't load up the updates tab until my mobile data is switched off?

Cellular data tab not showing

I do not have a Cellular data tab showing - can anyone help me please?

Hi - Settings. Oh - I am so sorry I have found Mobile Data and this seems to contain the information I need to organise my account for 3G. I am in the Uk - so perhaps that's why it's a bit different.
Sorry - feel a bit stupid now....!
Many thanks for your prompt reply

"YouTube videos require a mobile data or Wi-Fi connection"

Whenever I try and use the youtube app on my home screen I get this message. "YouTube videos require a mobile data or Wi-Fi connection". Any thoughts or anyone else with a similar issue?
I am on O2 (Iphone4) and seems to only happen when not using wifi. I've tried a full reset, but no change.
Thanks.

I am also facing the similar issue when I click on YouTube application from Home Screen.

Can't see data in data tab when there is a "." in table name

Hi,
I have a problem with SQL Developer 2.1 (this works with 1.5).
When there is a dot (".") in table name, we can't see data in data tab (we have no synonyms so it's not same bug).
If I try to export data on same table, in "WHERE" tab, I can see sample !
Any idea ?
Thanks

logged
Bug 9393866 - datatb shows no columns for table name containg [dot]
-Raghu

Can't see data in data tab - sql server 2005

hello,
i am connected to a sql server 2005 database (with jtds driver), the connection is ok, i see the tables but i can't see data in data tab.
i have an error : incorrect syntax
somebody can help me ?
thank's in advance
alex

definitely. I was going to say, make sure you have the privileges to read data.
From Microsoft SQL Server 2000 on, it is recommended that you are a member of the db_datareader - so that data in the database can be read
Barry

Unable to update a field using the Data tab on a VIEW

When viewing data using a VIEW instead of going to the table directly, am unable to change the values in any of the fields
When I click on the list of VIEWs for a schema, then select a view that is based on a SELECT statement for a single table with a Primary key, and then click on the DATA tab to modify the value in one of the fields, SQL Developer does not allow me to change the value.
Went into SQL Plus, and was able to execute an UPDATE statement against the same row of that VIEW, and update that field ("UPDATE vw_mytable SET thisfield = 'YES' WHEN row_id_number = 1'").
Does SQL Developer not allow updating tables through a VIEW?
Will it allow updating in the future? Please say yes.
Oracle 10g DB and latest version of SQL Developer.

Remember to add feature requests and vote on them on the SQL Developer Exchange!
<br>
<p>We have added updateable views to 1.1, but do remember, not all views are updateable - even in SQL*Plus.</p>
<br>
Sue

Material field not getting displayed on Material Data tab in ME51n or ME21N

Material Field was missing in ME51n/ME21n.
I went into SPRO ->PReq-> Define Screen Layout at Document Level and checked Optional for Material field. Now it's showing up on the ITEM overview section of the Preq.
But its still missing on Material Data tab in ME51n or ME21N but I can see the Material field on the Item Overiew section of the Req/PO Screen.
Where exactly do I make the settings for the item level in SPRO?

We use the Enjoy screens and document types for ME51N/ME21N pretty much out of the box. We do not have the material master number on any of the detailed item tabs either. I do not think you can show it in the details unless you activate the customer specific fields tab.
Regards

IPhone 4s mobile data does not stay turned off.

I have an iPhone 4s running iOS 7.1.2. When I go into the mobile settings and turn off the mobile data on my applications that I don't want to use my mobile data for, when I exit out of the settings and go back in, they have been turned back on. I've tried a hard reset and doing a reset and then putting the back up back on the phone and none of it seems to help. Its already cost me an additional $40 on my last phone bill because the settings didn't stay off and my songs auto downloaded even though I had the settings turned off.
If there is a fix other than having to reset and not use my backup I would love that, as nothing else I seem to try works.

Clean the iPhone charging port with a clean dry toothbrush.
If still problem, iPhone 4S has full Warranty, make Genius Reservation and take iPhone to Apple for resolution.

Problem on ios 7.0.4 on iphone enable your mobile data uncheck to green (enambled) works great ring and shows who ringing may work on 4s and five not tested please try get back to me thanks

on iphone enable your mobile data uncheck to green (enambled) works great ring and shows who ringing may work on 4s and five not tested please try get back to me thanks

I'm sorry, but you are going to have to try a little better to explain your issue and what your question is, or post in your native language.

Windows 7 Pro x64 does not detect HP Mobile Data Protection Sensor (accelerometer)

Hello there.
I installed win7pro x64 yesterday and already came across a serious problem that makes my way of using the notebook a bit dangerous for my precious data.
When I was working on HP-branded Vista 32bit (from recovery partition etc), there was a device called HP Mobile Data Protection Sensor together with HP ProtectSmart (or Protect Smart) software. In other words, the HDD accelerometer that parks HDD's heads when it "feels" it's falling or something, and software for it. It worked brilliantly.
Until I decided to install Win7... Then, surprisingly after a driver-install failure and taking a look at the Device Manager I noticed that there's no such device! I checked it three times, looked at every device's property, even reinstalled Vista 32bit back - it showed again - and installed Win7 - not detected again. There's nothing that has Device ID's HPQ004! I remember people saying that after fresh Windows install, there were 6 unknown devices or more. I had only 5. [Fingerprint device, 3x MemCard reader and IR receiver]. There was no accelerometer... Also, when I try to install the drivers/software, the windows pops up:
ProtectSmart Hard Drive Protection: with text Property.AccelerometerNotPresent
and then another one saying something like Features were not installed because of installation error or unsupported feature.
So now I'm stuck with a notebook that is unsafe to travel with, because the disk is no longer protected
I already installed all the drivers available from HP page, even downloaded newest ones from Intel (chipset) etc.
Is there a solution to this? Has anyone else encountered this problem?
Windows 7 is officially out and available as RTM version, not beta, so I think HP should open support for it and release new drivers for win7! And most importantly, fix this issue ...
This question was solved.
View Solution.

Well, thanks to myself, I fixed it. After some thinking I remembered that ACPI = BIOS-related. It appears that there is a problem with the newest (F16) BIOS.
F.16 changelog is below:
Version: F.16 A (26 May 2009) Fixes
Updates the Intel MRC Code to version 2.7.
Updates the Intel AHCI OP ROM to version iSrc 1.20_E.0012 11252008.
Updates the BIOS to support Microsoft Windows Vista Operating Systems with Service Pack 2 (SP2).
I went back to version F.14 and... boom! New (unknown) device found And guess what, it's ACPI/HPQ0004... So now my HDD is protected again ^^ yay!
I don't know which of these changes cause that, but it looks that that can be fixed.
I'll go back to F.16 again to see if the device will disappear and then contact HP support on that case.
EDIT: Well, F.16 breaks things again, so it's definetely a BIOS problem. Thanks for... umm... well... at least spread the word, guys I hope this helps if someone has the same problem.
Message Edited by dark_skeleton on 08-22-2009 07:08 AM
Message Edited by dark_skeleton on 08-22-2009 07:11 AM

HT1689 since doing the 7.0.4 update i notice that my mobile data has doubled and i am running out of data mid month. I've disabled apps s not many running. Any suggestions?

since doing the 7.0.4 update i notice that my mobile data has doubled and i am running out of data mid month. I've disabled apps s not many running. Any suggestions?

I am having the same issue even with the newer 7.1. I have a 1-100 KB data push on both my husdand's and my phone every hour on the hour (i.e. my will be at :23 of the hour and his will be at :13 of the hour and it will change). This is whether we are on a WIFI and with all apps, background refreshes, push notifications, etc turned OFF.

Connected to wifi but at midnight I am charged for "mobile data" on 3G (iPhone 4s)

I am on the Vodafone network and housebound. My iPhone 4s is connected to internet via wifi.
I have been incurring huge charges from Vodafone as a result of "mobile data downloads" ...which always occur at midnight when I am connected by wifi
I have had my phone looked at in a Vodafone store and they indicate that there doesn't appear to be any untoward apps on my phone.
I suspected the culprit to be the "Songpop" app and posted a message on their forum.
"Songpop" said this was a problem with my ISP but this has been ruled out as there aren't any drops in internet connection from by my ISP (they have looked at connection logs).
The official response from "Songpop" on their forum is that this an "Apple Support" issue. See here: http://support.songpop.fm/songpop/topics/playing_songpop_on_phone_via_wifi_but_i ncurring_download_data_charges_for_3g_useage?utm_content=topic_link&utm_medium=e mail&utm_source=reply_notification
Can anyone throw any light on this issue as I have a very expensive bill to pay from Vodafone and I have not downloaded anything to my phone by 3G ... and I rarely use 3G when away from home ... and if I do use away from home then I do not stream videos etc.
Please help

Without looking at specific parts of your issue, here's how to turn cellular access off completely but keep your WiFi active:
Go to Settings > Airplane Mode and turn it on.
After doing that, go to Settings > WiFi and turn that on.
Then you will have WiFi and no cellular access.

Mobile data(3g and edge) on lumia 620

Hi,
i have problem with connecting my Lumia phone to mobile data, i tried connecting through 2g, the browser was working but not my messenger apps including WhatsApp, so i tried connecting through 3g and WhatsApp, Skype and none of my messenger apps seem to work with 3g data too, with wifi all these work fine, has anybody faced similar issue, please help

There may be a problem with your apn settings. Your phone is designed to retrieve the settings from your sim card. Unfortunately not all sim cards support this especially iof you have an old sim or sometimes the sim could be faulty. My suggestion for the moment are to make sure you have the latest version of the Access Point app on your phone and if that does not resolve then contact your provider so see if function is supported or try a replacement sim.
You can doenload the latest version of Access Point using the Link to the QR code below.
http://discussions.nokia.com/t5/Pool-of-Knowledge/Nokia-Windows-Phone-8-App-Updates/td-p/1640082

Iphone4 "Mobile Data" Tab

Similar Messages

Maybe you are looking for