Iphone4 not charging or booting up.

My phone has been holding charge until today. I let it drain the battery accidently this morning. I never notmally let it drain the battery, I always try to keep it full charged for business however when I plugged it in it just goes to apple logo and then to homescreen and shutsdown. Its on a cycle of doing this continously.
I've tried another charger, tried to plug it into the computer but it can't boot up long enough to restore it. I've tried holding home/power button for 13 seconds and it just doesn't stay on.
Any ideas, is the battery in need of replacing? It seems like it's only since I updated to ios 6 but can't downgrade because it won't even let me boot up long enough. It's literally seconds before it shutsdown again.

Possibly either damaged pins in the iPhone socket or a faulty USB cable.  Also, some computers do not provide enough power via the USB port to charge an IOS device.  What is the battery status indicator (top right of the display) showing when connected to your PC?
Do you have access to another cable or a mains charger?

Similar Messages

  • Iphone4 not charging, pls. help!

    iphone4 not charging, pls. help!

    I'm also having a problem with charging.  I tried to download photos to my computer (which didn't work) and now it wont charge on any charger.  My husbands phone connects to same computer and will charge on all chargers. I have tried the reset described above but it said to connect to a charger (it was plugged in).
    Please help!!! I have less than 20% charge left.  Had the exact same problem a couple of months ago with my original phone which was under warrantee.  This one is not!

  • No AC Power, Battery not charging, Windows boot up issue

    Searched the forums but could not find an answer for my specific problem.  
    COmputer: L355 - S7905
    Windows XP Professional
    Issue: installed new motherboard.  When on AC power, laptop shows a steady green LED light but will not boot up without the battery installed.  Will not stay running when the battery is removed or dies.  When plugged into AC power, battery charging light is on but battery continues to lose power; will not charge.  Had the computer operating properly initially but noticed the power issue.  I ran a chkdsk on one of the subsequent boot ups and now have a "config.sys file missing" error and can not get into windows any longer.  I was going to try some of the battery charging suggestions listed on this forum but no longer can get into windows or the recovery council.  Last screen attainable says to select "R" to repair system using a Windows disk.  Can not get to a DOS prompt.  
    Status so far:
    - Ran volt meter check on power adapter and getting steady 19 volts.  Various motherboard checks with a voltmeter are seem normal.
    - All LED lights on laptop are indicating the computer is working in a proper state (ie power light on, batt charging light on, HDD light on when in use, etc)
    - replacement motherboard is the EXACT same motherboard as the original.  Same model - identical.
    - Can get passed BIOS screen successfully; can get into boot options screen (Safe Mode options, command prompt, etc) but all options eventually default to an error message I get from the chkdsk program and I can not go any further.  
    - Laptop did not come with an original Win XP restore disk.
    - Battery is a replacement but is the exact same part number as on the Toshiba original battery.  Battery seems to be operating perfectly once it is charged (had to go to computer accessory store for charge)
    Questions:
    - Why is the AC power only not able to run the laptop??  Is it a software issue??
    - Once I can get into the windows OS, I presume I should be able to correct the battery not charging issue . . . is that right??  Sounds like it is a software issue from what I have read on the forums.  My plan was to reinstall the Windows operating system but I can not do that on battery power alone.
    Any suggestions on how to proceed??
    Thank you - Paul
    Solved!
    Go to Solution.

    Lawrence - Your suggestion was right on target, the replacement adapter solved my power problem.  I would have never believed that to be the problem since the digital voltmeter was indicating the required 19v from the defective adapter, I would obviously NOT have figured this out on my own.  Thanks for your time, response and help on this issue, I really appreciate it.
    Paul

  • Upgrade to ios 8.0.2 iphone4s not charging

    upgrade to ios 8.0.2 still same problem on my iphone 4s
    I've found my iPhone4s is not charge while turned on either through my computer or plugged into the wall.  When plugged into the computer no responce
    If I turn the phone off and leave it plugged into either the computer or wall, it wont charge it only turns on.
    iPhone 4S, iOS 8.0.2
    please help

    Hi there beeshwas,
    You may find the troubleshooting steps in the article below helpful.
    iPhone and iPod touch: Charging the battery 
    Resolving issues
    If your battery doesn't charge, or if your device shows a low-battery image, black screen, or "accessory not supported" alert, follow these steps.
    Inspect the connector at the bottom of the phone:
    Make sure that there are no bent pins in the connector.
    Make sure that the connector is free from debris.
    If there are bent pins or debris, please contact Apple Support.
    Otherwise, continue troubleshooting.
    Make sure that the outlet you're using works.
    Make sure that the Apple USB cable and Apple USB power adapter work.
    Plug the device in to power and let it charge until your device turns on. This could take between 10 and 30 minutes. If you don't have an Apple USB power adapter, try connecting to a computer's high-power USB 2.0 port (not a keyboard). The computer must be on.
    If the device still exhibits an issue, try turning your device off and then on again while connected to power.
    If the issue persists, please contact Apple Support.
    -Griff W.  

  • IPhone4 not charging

    Recently my iPhone stopped charging.  When I connect it to the wall charger (or any type of charger) the red battery with the bolt icon pops up on the screen.  I've left it connected for hours and the battery does not charge and the phone wont turn on even if left connected to the charger.  Once I disconnect the phone from the charger the red battery with the plug and bolt icon pops up. 
    Does this mean I need a new battery?

    same here! suddenly my iPhone4 no longer works/charges.. I've tested it with all our chargers (iPad, iPhone 4S, iPhone 3G and the iPhone4) Just imagine 4 charges and still no luck, any other iPhone charges on any of the 4.
    I'm so disappointed because I've taken care of my iPhones so well and this happens. This phone is just a year old and this unexplainable issue just occurred. Have also tried to soft reset POWER + HOME for 10 seconds and this doesn't solve anything.. just this screenshots you've provided!

  • Why my iphone4s not charging?always showing 1% even if i charge it whole day

    Hi i really need help, my phone is not charging, there are times that it wasnt charging, its always showed 1% only even if i charge it whole day. but when i turn it off and let it rest for 1-2 days, and when i turn it on after resting it for 1-2 days it was fully charge or sometimes it is 97%. i bring it on the store where i bought it and use the warranty, they were saying that they cannot see any problem on my phone because they saw that it was charging. anyone could help me for this matter please? im a new iphone user and it was so disappointing that im encountering this problem for a short period of time.,i'm just using it for more than 5months only. i really appreciate if someone can hep me with this,, thank you very much...

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.
    I was experiencing a similar issue where the battery percentage was not updating on my device unless I reset or rebooted the device and it would not acknowledge being plugged in.  The only thing that resolved for me was a restore as new.

  • Porsche Design 9981 Not Charging or Booting

    I have a Porsche Design 9981 and I put into charge last night the charger seems to be working but the phone is not charging what so ever I have attached via USB cable to a mac and still nothing have taken battery out and left for 15 mins and still nothing any advice the unit is like 30 days old 

    Hi and Welcome to the Community!
    Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain directly connected to a known-good wall charger (not PC USB, not a cradle):
    With the battery inside, connect your BB to the wall charger
    Leave it alone for 2 hours, no matter what the LED or the display does
    Remove the battery
    Wait 15 minutes
    Insert the battery
    Wait another 2 hours, no matter what the LED or the display does
    This has been known to "kick start" some BBs.
    It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
    Obtain an known good and already fully charged additional battery...use it in your BB and see what happens
    Obtain access to a known good and identical BB...use your battery in it and see what happens
    The results of this will indicate if it's your BB or your battery that has the problem. Note carefully please that "new" and "know good" are not necessarily the same things. While rare, a "new" battery certainly could be defective. Rather, the simplest (and least costly, btw) method to conduct this test is to find someone with an identical BB who has no issues...trade batteries and see what happens.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Laptop hp pavilion g6 2016 tx not charging or booting

    My  laptop is hp pavilion g6 2016tx ( Intel i 5 with 1GB AMD graphics 4 GB RAM, 500GB HDD 15'' screen ) which is around 2 years old and now out of warranty.  I had a strange problem with it. I used it till last Sunday ( 24/08/2014) and after use I properly shut it down and kept in my laptop bag. On Monday evening when I was switching on it was not  booting. I plugged in the charger and then noticed that it was not charing and no LED light for charging. I did hard reset ( by pressing the power on button mor than 30 sec by removing battery and charger and then trying to power on) but system not booted nor charging. I checked output voltage of charger and it was OK, battery is also fine.
    I took my system to authorised hp service centre on 28/08/2014, and in front of me they tried to switch it on and then told that there can be motherborad problem, and they will diagnose and tell me next day what is the exact problem.
    Next day, 29/08/2014 evening they told me that some liquid spill is there on keyboard and NOT A SINGLE KEY is working. I told them that there is no chance of liquid spill as I am the only one using the laptop and until last shut down on Sunday ( 24/08/2014) laptop worked very well and all keys were OK.
    Then they told that they tried to boot with a different motherboard and got error screen (blue) while booting, and  toldme that I have not shut down my system properly last time and even if they replace motherboard I may have a corrupt OS. They also told that they don't have spare Processor for checking my laptop (intel i 5 CPU) and have to order for new one. I asked them whether processor is faulty, then they said nothing.
    I am a graduate in Electronics and Post Graduate in Computer Applications, and for past 20 years working in IT dept of a Bank and have experience in harware trouble shooting as well as on Software.
    I told the service center people that I cannot believe that there is any liquid spill on key board and NONE of MY KEYS are working, because until my last use and shutdown on Sunday, system was working fine and no one else touches it other than me. I told them that when you replace motherboard, OS may give blue screen because of HW compatibility, but they are telling me that I did not shut down my system properly.
    They are telling all unbelievable nonsense (as telling to a layman who doesn't know anything) to me which cannot be digested by me.
    I feel my system can have some shorted component at power supply area on mother board or maximum a faulty mother board. But the service center people are trying to tell that my keyboard, motherborad , cpu as well as graphics card etc..( list can grow since they have not given me quotation as promised on 29/08/2014).
    I doubt some foul play by the service center and they are trying to cheat me by removing good components and making me pay more than half of my laptop purchase price ( Rs. 46500/-) .
    I have made some markings on my motherborad , battery , HDD and RAM to identify it in case some one changes it. But how will I know if they are removing my good Processor, as well as graphics card or even mother board which may have component failure at power area which is serviceable.( Like MOSFET, Capacitor etc).
    How I can get the serial nos of all components of my laptop or identify if someone replaces it.
    What could be the booting/charging problem . since my system worked fine until last shutdown.
    I request help and suggestions on this, like what to do if the service centre cheats me.  Please Help!
    Regds,
    Sdev

    Thank you for the reply. I am waiting for the quotation from hp. Sure I will contact hp directly. But the call centre support in these kinds of tech issues are of no use, at least from my experience. I did talk to the head of service dept (at service centre), and he told me that they don't have spare board or processor and have to order to hp once I accept quotation, but I can choose to go for replacement of any faulty components, once they receive the items from hp or  I can opt for just walk away from them without service by just paying their service charge of Rs. 850/-. In that case I have to find out some reliable fellow who does chip level service ( if at all possible.)

  • Iphone4 not charging after 4%

    i have an iphone4 and the problem is the charging cable keeps getting spoiled...and now the phone doesn't get charged above 4%..what could the problem be ? Is it the iphone issue ..? or yet another charging cable replacement required?

    Try resetting it: Press the Sleep/Wake button & Home button at the same time, keep pressing until you see the Apple logo, then release. Try charging it now.

  • Z1 is not charging and booting

    When I plug it in electric power red LED lights and remains constant
    After a while it turns on the screen without pressing anything, the sony logo appears and then the battery logo. The screen goes black and if I press the power button, the battery logo comes back but it doesn't rise.
    When I press volume up + power button it vibrates 3 times but nothing happens after
    When I connect the pc recognizes it as "E: \" and I'm not able to use flashtools because it doesnt recognze.
    I've left on the charger for 16 hours and nothing has changed
    Could anybody help me please? 

    charge your phone again and then try SUS, that might work, with SUS  your phone has to be off
    Update Service (SUS)
    PC Companion (PCC)
    Bridge (for Mac)
    Alternatives on How to backup Xperias
    http://talk.sonymobile.com/thread/36355
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • Why is my iphone4 not charging? Please help me.

    My iphone wont charge and when i plug it in. The charging sign shows but the iphone doesnt charge. the battery is now dead. Everytime i plug the charger in now the iphone turns on and as soon as it finishes turning on. it dies again. this just keeps repeating itself.
    I have taken it to a repair show and they have tried to put a new battery but it still wont charge. they have also tried putting a new charging port but still it wont charge. they have said that it might be the motherboard.
    Please help.

    <BLOCKQUOTE><font size="1" face="Verdana, Arial, Helvetica">quote:</font><HR>Originally posted by Barbara Boehmer ([email protected]):
    Evelyn,
    When using Procedure Builder, use TEXT_IO.PUT_LINE instead of DBMS_OUTPUT.PUT_LINE to output from a client_side procedure or function to the PL/SQL interpreter window.<HR></BLOCKQUOTE>
    Thanks Barbara, but I need to display the output from stored procedures which already contain calls to dbms_output.put_line. The simple solution, I guess, is to use SQL Plus, or TOAD. But I'm trying to get to grips with Procedure Builder, and was hoping that there was some way of automatically displaying calls to dbms_output.
    null

  • Why does my iphone4 not charge from the wall when on? But will charge when on and plugged into my laptop? I've tried different wall plugs, charging docks.. Nothing works, not even car charger.. Anyone else having this issue since the update?

    My iphone 4 will no longer register my wall charger while on.. It WILL charge if turned off.. OR, if I plug it in to my laptop while on. Tried any different cords and plugs, all the same result.. REALLY REALLY frustrating!!

    - While charging try resetting the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Next try restoring the iPod via iTunes.  First from backup and if still problem restore to factory defaults/new iPod.
    - However, I really think that the iPod has a hardware problem and an appointment at the Genius Bar of an Apple store is in order.  If defective Apple should give you a refurbished iPod.

  • IPod will not charge or boot up correclty

    I purchased a brand new iPod (video) 30gb for my daughter. Followed instructions and when connected to the machine, the iPod makes a clicking noise (sounds like a hard drive), the screen shows the apple logo and then the "sick" iPod and then shuts down. I have tried to reset, charge, etc. No luck. I bought the same type iPod for my son and it is working without problems. I am about ready to attempt to take it back to the store but it is two hours away. Will they replace it since it is new? Also, can you use two iPods on the same PC? Thanks for any assistance....
    Local   Windows XP  

    Hello Zimm,
    Sorry to hear about your troubles. If you have one
    iPod working ok and you have tried everything here:
    http://www.apple.com/support/ipod/ then I'd take it
    back.
    To use two iPods on one PC read this:
    http://docs.info.apple.com/article.html?artnum=300432
    Thank you!! What a great service this is....

  • HT1476 when i plug my iphone4 for charging it does not charge, i have to restart it in order to start charging?

    when i plug my iphone4s for charging it does not charge, i have to restart it in order to start charging?

    Did the Firefox installation finish without problems?
    You can check:
    *http://kb.mozillazine.org/Browser_will_not_start_up
    A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.org/kb/Server+not+found
    *https://support.mozilla.org/kb/Firewalls

  • My iphone4s will charge but not sync when connected to my macbook pro, using the latest itunes

    My iphone4s will charge when plugged into my macbook pro but will not sync. I am using the latest version of itunes and I already tried restarting both the computer and the device. What gives??

    After days mucking around this worked for me..
    For Windows Vista, Windows 7, or Windows 8
    Right-click the Apple iPhone, Apple iPad, or Apple iPod entry in Device Manager and choose Update Driver from the shortcut menu.
    Click "Browse my computer for driver software."
    Click "Let me pick from a list of device drivers on my computer."
    Click the Have Disk button. (If the Have Disk option is not  present, choose a device category such as Mobile Phone or Storage Device  if listed, and click next. The Have Disk button should then appear.)
    In the "Install from Disk" dialog, click the Browse button.
    Use this window to navigate to the following folder:
    C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers.
    Double-click the "usbaapl" file. (This file will be called  "usbaapl64" if you have a 64-bit version of Windows. If you don't see  "usbaapl64" here, or if there is no Drivers folder, look in C:\Program  Files (x86)\Common Files\Apple\Mobile Device Support\Drivers. instead).
    Click OK in the "Install from Disk" dialog.
    Click Next and finish the driver-installation steps. Open iTunes to verify that the device is recognized properly.

Maybe you are looking for

  • Frontpanel freezes when an event of an already closed event structure occurs

    Hello, I´d be very glad if someone could explain to me the behaviour of the attached short and simple vi. If you press the OK button #1 once and then the OK button #2 the vi finishes, but if you press the first button more than once before pressing t

  • Java thread pauses

    Hi, I am tuning a Java application, which takes a task from a queue and executes it continuously. My Queue and the thread which adds a task to it is in native C code and I am getting the data from it using JNI in the Java main thread. I am measuring

  • How do I divide a long h.264 .mp4 into smaller movies?

    I have 2.5 hrs of .mp4 movie in h.264 format that I would like to divide into 1/2 hr units. 1. I find it very difficult to get my crops accurate in QT. 2. When I save it it saves a .mov, just changing the file type to .mp4 in Finder renders it unread

  • Really dumb newbie question

    ok how do you change the text of a label for a form field, I drilled down to edit the layer its on, its property has it as dynamic, which doesn't make sense because it is static, but I don't care about that just how do I actually get to the text and

  • SP3 Beta 3 - User auth issues

    So I got SP3 Beta 3 running on a SLES10 box. I freshly installed the agent on a test workstation and registered it all up. The zone I have is pretty empty (for testing). I added an eDir ldap user source and got it all running on the primary server. T