Iphone4 speakers have very low speaker volume

ipone4 speakers not working

Kato,
Sorry to hear about the low volume, that can be frustrating!  I would start by removing the battery, reinserting and powering back on.   See if your profile volume is set to high by selecting Profiles -> Advanced-> (active profile)-> phone ->Volume (set to high) ...if all else fails a master reset (Options, Security Options, General Settings, (press menu key) select wipe handheld will be last resort ( Dont forget to BACKUP!)
If these options don't resolve, I would recommend calling your service provider for replacement options....
Good luck!
If I successfully help you with an issue, thank you for clicking "kudos" in my post.
If your issue has been solved, please resolve this thread by marking the post which solved it for you!

Similar Messages

  • Z3 D6603 very low call volume !! HELP !!

    My Z3 D6603 have very low call volume !! Once going out side, i can hear tiny voice from my caller. This phone cant be use outside !! I try alot of suggestion from internet but not working. I try the setting on the "Call", I try the setting on "Audio Setting" still not doing a thing.

     could you elaborate ?  

  • IDT High Definition Audio CODEC v. 6.10.6395.​0 Upon installati​on I have very low audio output

    IDT High Definition Audio CODEC v. 6.10.6395.0.  5/21/ 2012
    Upon installation I have very low audio output!   Screen Shot    Screen Shot 2
        I have tried:
    un-installing and reinstalling the drivers.
    Installed the original drivers via HP's website sp53222 for my particular model.  HP  Pavilion HPE  h8-1070t
    Any suggestions? would be greatly appreciated.  It would appear IDT who I also emailed and they never responded is responsible for a codec pack that is not fully functional with this motherboard.
    was wir lieben meistens nicht kriegen

    Did you access the Catalyst Control Center in programs and look at the latest updates for your graphics card and make sure you didn't download the audio drivers they self install and are checked automatically each time you attempt an update for the card.
    Did you right click on the speaker in the system tray and go into recodring devices make sure everything is setup propper there sometimes they too can change.
    I'm familiar with cakewalk but never used it on Win7 its been many years since I played around with that. If you are using the onboard audio card and it has worked before and not now if I were in your situtation I would attempt to reisntall the dirvers via device manager they do sometimes become corrupt especially if you picked up any malware that was removed by your antivirus software due to the drivers and malware both reside inwindows\system32.
    After the reisntall of the drivers if the issue is not resolved I would upgrade the audio card with a  PCIe x1 component such as:
    Creative Labs SB1040 PCI Express Sound Blaster X-Fi Xtreme Audio Sound Card
     http://www.amazon.com/Creative-Labs-SB1040-Express​-Blaster/dp/B000W7PNZI/ref=sr_1_1?ie=UTF8&qid=1357​...
    After I paid for a real soundcard with Recording: 24-bit/96kHz and Sound Output Mode - 7.1 and bypassed my onboard audiocard I never had any issues again. My onbaord worked too in the begining for certain things than stopped mysteryously and the reinstallation became ineffective after a while so I decided the money for the tower was invested mainly in the CPU i7 the RAM and HDD.
    *** Note if you did install the audio drivers for the graphics card you will have to change the onboard audio in the BIOS from automattic to enabled. Otherwise you will have no sound at all. So never take the audio drivers for the graphics card unless you need them for DVR recording or something. The PCIe audio cards are never effected by this however only the onboard audio. Another reason onboard is a cheap way to go and HP bundles it as cheap as it can my friend.
    Good Luck again!
    was wir lieben meistens nicht kriegen

  • Nokia Lumia 1020 Very Low Earpiece Volume

    Hi
    My Nokia Lumia 1020 has very low earpiece volume. At even maximum volume one can find it really hard to hear. I have brushed off any dust etc.. but still the problem persists. I have also read other users facing similar problems. What a pity that such a great phone cannot fulfil basic purpose of having a phone. What's the solution as I want to switch back to Samsung note 3.

    Hi, hugosilver and kleo1712. 
    Welcome to the Nokia Support Discussions!
    To help us isolate the issue, you can not hear the person on the other line, the person on the other line cannot hear you, or the audio quality is poor when in call? There are several fixes that you can try to possibly resolve whichever the exact issue you have with your phone is. See: http://www.nokia.com/ph-en/support/product/lumia1020/troubleshooter/?categories=Audio%20and%20sound,.... (Note: The provided link is intended for customers who are located in the Phiippines. If in case you are from a different region, go here: http://www.nokia.com/global/support/locations/, select your region, your phone model, and then "Troubleshooting".) 
    In case you have other questions, just let us know. All the best!

  • Low Speaker Volume

    My Blackberry 8820 started having a really low speaker volume today. I have the volume bar cranked all the way up, and I can barely hear the person on the other end.  I've had it for a few weeks and the volume has been fine before today, so I have no idea why it's started doing this.  Any help would be greatly appreciated!

    Kato,
    Sorry to hear about the low volume, that can be frustrating!  I would start by removing the battery, reinserting and powering back on.   See if your profile volume is set to high by selecting Profiles -> Advanced-> (active profile)-> phone ->Volume (set to high) ...if all else fails a master reset (Options, Security Options, General Settings, (press menu key) select wipe handheld will be last resort ( Dont forget to BACKUP!)
    If these options don't resolve, I would recommend calling your service provider for replacement options....
    Good luck!
    If I successfully help you with an issue, thank you for clicking "kudos" in my post.
    If your issue has been solved, please resolve this thread by marking the post which solved it for you!

  • Lower speaker volume than usual

    Recently i noticed my macbook's speakers have a lower volume than before. When i use my earphones, there doesn't seem to be any difference compared to the past. So i think it should be a problem with the speakers. Is there anyway i can test the speakers to see if they are indeed faulty?

    Oh great!! Well if that is the case then thanks Apple for allowing the European Union to treat us even more like children and not let us think for ourselves that if the the volume was too loud we could just maybe turn it down??
    Now I can't enjoy my ipod, it just doesn't sound the same, much flater sound especially on all Equalizer settings, only goes louder if EQ is flat or turned off.
    Thanks a bunch!!!

  • Nokia 603 - Very low call volume

    Hello All,
    My nokia 603 has very low call volume than ordinary level.
    It seems to be known issue with 603. But i am unable to get any solution for the same. 
    Is there any patch update to be done for the same?
    My phone runs with latest FP2.
    Please advice 
    Thanks,
    Muralids

    muralids wrote:
    SIM works well in other phones. Im sure that the problem is with the phone only. even in headset call volume is low. I ve seen such kind of problemr are posted on internet, but there is no solution!
    it is really annoying
    The last resort perhaps is to send the phone to a Nokia Care Point for further device evaluation.
    You can locate one by navigating through your local Nokia support page at http://www.nokia.com/global/support.
    Good luck

  • Anyone else have low speaker volume?

    I bought two black 2ghz MacBooks and 1 MacBook Pro 2ghz.
    Anyone else have trouble with low volume? We can barely hear each other on iChat. We're ll putting out heads right down over the keyboard. I've lowned Mac for 11 yrs. These speakers are beyond bad.

    I have a Macbook pro and when I originally purchased and used Airport Extreme volume was very good. Noticed the other day that volume is very low. So some where during a OS update / Itunes update or some type of software update it's impacted by volume. Hopefully Apple will have a fix soon.

  • IPad mini retina low speaker volume

    I've just bought my iPad mini retina and I have noticed that the speaker volume is very low. I know the speakers are small as of the size of the device but even my iphone 5s with one speaker is louder and was not sure if this was normal or my device not working correctly? I've got until 11th of jan to take back for exchange and would rather get it sorted before that if it is the device causing this issue

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
    If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/ts1630
    http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
    To solve some sound problems, just follow these simple steps
    1. Go to Settings
    2. Tap on General
    3. Tap on Reset
    4. Tap on Reset All Settings
     Cheers, Tom

  • Very low sound volume on Skype, but OK on everything else

    I know this subject has already been raised but I have tried all the suggestions on other posts on this topic, but still the volume of Skype is very low. I can only hear the conversation in a very quiet environment. The same low volume applies when I check the sound in Skype or do a test call. I am using an Acer laptop (built in speakers) and Windows Vista which is up to date. All sliders on the sound mixer are on 100% and the box Automatically Adjust Speaker Settings in Skype is unticked. I am using a recent version of Skype (installed about a month ago) The sound volume on iTunes and other applications is absolutely fine! Please keep explanations simple, I am not a computer expert... Thank you!

    Skype was working then became very quiet.I am on Win7/64 Creative soundcard, Latest Skype
    The solution (for me) was simple.
    Go to: Skype>Tools>Options>Audio Settings>Speakers
    In my set up there is a dropdown to select what speakers Skype should use. It was using Digital Audio Interface There was also another option called "Speakers" I chose speakers and the volume returned to match the rest of the system
    How it got set incorrectly is a mystery. I guess "Gargy Watts" must have set it, as my old mum used to say... or the Skype Fairy has been fiddling, as I have other things on my mind rather than fiddling with Skype settings and I'm the only one to use the PC!
    I hope this helps some of you guys and gals 

  • Very low sound volume on Portege R500

    The sound volume on my R500 (R500-11c to be exact) is ridiculously low. Only with volume maxed out (100) and using headphones do I hear anything at all, and even then it's way too low to be useful. I can just make out the test sounds in the left and then right earphone when using the test sound found at Control Panel -> Sound -> Speakers (there are no Headphones to be selected) -> Properties -> Advanced -> Test. Unplugging the headphones I hear nothing from the speakers, due to the (very low) sounds made by the fan and HDD. Playing music (with headphones) I can just make out that sounds are being produced, but I can't even make out what is playing.
    I've tested the things mentioned in the "Satellite 5105-S901 Sound is very low (even on max volume) using supplied Toshiba driver" thread with no success (including Loudness Equalization).
    I'm running Vista Business 32bit, and have tried the driver_audio_realtek26117B.exe, driver_audio_realtek_TC00157600B.exe, and Vista_Win7_R243_x86.exe driver files, and also used the util_mute_off_25847B.exe utility.
    Enabling mute makes the already faint sounds go completely silent, so I don't think it's a mute issue.
    Jack detection does work, I can see that in the Realtek HD Audio Manager program. Using that program's sound test (Speaker Configuration) I have to go to a completely silent room, and even then I only hear something in the right earphone. (I think; it's so darn low I could be imagining I hear it.)
    Decreasing the sound volume slider from 100 does make the almost inaudible sound even harder to even notice, and at around 45 it is no longer audible even in a quiet room with headphones.
    So it seems that I somehow need to reset the audio chip to "normal" level. Or it is broken and can't output anything more audible.
    Does anyone have any ideas what I can try next? I can boot to XP or Linux if anyone has any ideas on how to get sound there, just to get started. (They're silent as well, I haven't done as extensive testing under those as under Vista.)

    Hello, and thanks for answering.
    Yes, I have tried increasing the volume in control panel -> Realtek HD audio manager. No success.
    I have used a bunch of different drivers, both from toshiba's website and realtek's.
    Recently did a fresh XP install on another hard drive (don't have Vista install media), tried both 5.10.0.5869 and 5.10.0.6066 drivers (5.10.0.6066 is from march 13, 2010), sound still as low no matter what I do.
    Did the really desperate thing: bought a new (used) sound module on ebay ("Toshiba Portege R500 (PPR50E-00L048EN) USB jack" on ebay.co.uk), but it has the same problem as the original one.
    A hardware problem... well maybe, I was thinking perhaps the sound module doesn't get enough power from the motherboard, but since there is some sound (although very low), the USB jack on the module works, the headphone/mic jack detection works, and the diagnostics found in the Control Panel all say that the device is working OK, I don't think it's a hardware problem.
    I'm guessing there is a problem with the drivers initializing the sound to a ridiculously low setting, and increasing the volume level to 100 makes it go up to a level equal to perhaps 2 in a regular system. That should be solved by a fresh install, but it isn't.
    Perhaps the BIOS messes up the sound? But re-flashing the BIOS doesn't help...
    Anyone got any other ideas?
    I've googled and found people having problems with low sound volume on other laptops using the ALC262 chip, but no general solution.

  • Low speaker volume with HDTV on dv7t

    I have great reception with the plug in HDTV arial provided
    However, with the speaker volume at max it is barely audible.
    Speaker volume on internet videos etc is just great
    Thanks
    Bill

    Hi @Qbert58 
    I understand you are experiencing an low audio difficulty with you notebook. 
    Please remember when posting to provide your exact model and not just the notebook series  for someone to assist you more efficiently. 
    How Do I Find My Model Number or Product Number?
    Have you done all your Windows updates?
    Have you ran the HP Support Assistant ?
    Here are two links that may also help.
    HP Notebook PCs - No Sound from Speakers (Windows 8)
    HP PCs - Beats Audio Console (Windows 8)
    Best of Luck!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Very Low Ipod volume

    I have recently bought a 2GP Ipod with colour display in the United Kingdom and I am very upset with the volume level. On the majority of tracks the volume is very low and when it is cranked up to maximum it sometimes distorts the sounds although they are not very loud. I have fiddled with the EG settings but to no avail.
    When using Itunes I set the volume to the maximum - is this incorrect. I am using Sony ear phones - the ones with the little plugs which go straight in your ear.
    Please can someone advise me what do as I am rather upset with the iPod - I have used the EU Pro Booster but it doesn't seem to help.

    Normally I do not engage in contest such as these, especially when I am correct, however I will take the time to set you straight on a few things.
    Your Statement: well thank you for your very kind and informative information.
    My reply: Never a problem. I do not mind correcting people that are not well informed, and where I might have a bit more knowledge.
    Your question: so do you live in europe and do you have a ipod from europe?
    My reply: Yes I live in Europe and no I do not have a European iPod, but I have taken the time to read about the differences between the US and European version. Can you say the same?
    Your question: if not do you have a head piece from b&o?
    My reply: When you say, head piece do you mean, head phones, or ear phones, or some additional piece of equipment from B&O designed for use with audio devices? You were not clear here so I naturally assumed you meant headphones. Second, how does this figure into the equation?
    Your question: if not what made you the king of judges to contamplate about my taste and the way i like my music?
    My reply: Show me in my original post where I judged your musical tastes. Second, where did I say any thing about how you life your music. I only stated a FACT (something that you failed to do), about how non-sealing headphones such as the B&O's that can not isolate sound can not match headphones that completely isolate the listener from ambient noise. My facts verses your opinion.
    Your sophomoric question: do you work for these folks www.etymotic.com
    My answer: No. Even if I did, you are still wrong and I am still correct.
    Your question: did i ask your opionion?
    My reply: Nope, but this is a public forum and I am providing facts where you are providing opinions. Who would you listen to? You with guesses and conjecture, or me who has provided details and links to possibly solve a problem for the stater of this thread?
    Your statement: I was just talking to a fellow who lived in europe and had a problem?
    My reply: So was I, and had info to back mine up.
    Your question: who are you to tell me that i am mistaken?
    My reply: Obviously someone that seems to know quite a bit more than you about this issue.
    Your statement: learn to be polite and express your views this way
    My reply: Learn or have an idea about what you wish to discuss and I will not have to correct you again.

  • Low speaker volume on ipad 2

    audio volume on my ipad 2 is very low even when I have it turned up to max volume.  My iphone 4s has souble the volume.  Is there anything I can do to increase the volume?

    I use a BOSE Soundlink to amplify my iPad. It can be connected by Bluetooth or 3.5mm audio cable.
    http://i1224.photobucket.com/albums/ee374/Diavonex/Album%203/59362afb82a5620f08d 2bda9073fedb3.jpg

  • Audigy 2 ZS + Vista 64bit resolves in very low maximum volume out

    Hi,
    I did just install Windows Vista Ultimate 64bit Edition on my computer.
    I've got a CREATIVE Sound Blaster Audigy 2 ZS sound card, and I downloaded and installed the drivers for it.
    I did not run into any complications while installing the driver, but after the driver was successfully installed and I rebooted my computer the first thing that hit me was the fact that the volume output was VERY LOW.
    I have to boost my volume to the maximum to even be able to hear my music and games at a decent volume level. The maximum volume output seems to have been reduced with at least 50% compared to what I had with Windows XP Professional.
    I've tried to configure every sound settings I can find, but without any luck.
    The sound card is completely useless with this low maximum volume output, when I can barley hear my music or in-game sound.
    Is this a common problem?
    Have do I solve it's
    I need at least 10% increase in the sound volume, otherwise the sound card is pointless.

    Yes I did, I've checked everywhere I can possibly think of. Have boosted everything to the max, but still it's way to low

Maybe you are looking for