IPhone4 stopped charging the connector port isnt working!

I noticed in the early hours today my iPhone4 which was conected to the mains power with its supplied lead stopped charging, my phone continued to work fine but now down to 9% battery life.  The connector port isnt working it wont sync or charge; what can I do?

Try to verify whether the problem is the AC adapter, cable or phone. Try connecting it to the USB port on your computer. Try a different cable, try a different power adapter if you have one.
If the problem is the phone itself, I'd say take it to your Apple store and have it replaced.
Does the phone still sync with your computer OK? Does it indicate it's charging when plugged into your computer?

Similar Messages

  • My iphone5 wont charge with usb port but works fine with wall plug... Infact computer. Doesn't recognizes the iphone

    Battery not charging with usb port but works fine with wall plug.. So the prob is computer is not detecting the iphone5 . This problem started after upgrading to 6.1.3 version

    Try to see what happens on another computer. If it works on another computer, the issue is not at the iPhone.

  • My Iphone 3gS is not being recognized in Itunes on my laptop. It is charging so the USB port is working properly. My wifes Iphone IS being recognized by the same laptop. My Iphone IS being recognized by the desktop computer and another laptop

    My Iphone is not being recognized in Itunes on my laptop. It is charging, so the USB port is working. My Iphone does work on another Laptop in the house and My wifes Iphone is being recognized on the same laptop that mine is not. Any suggestions?

    The key bit of information here is that one iPhone works on the computer in question and another does not. So it is unlikely that AMDS is not running or there is a driver problem; if either of these was the problem neither phone would be recognized in iTunes.
    Unfortunately, I don't have an answer either. Except to verify that both iPhones (the one that works and the one that doesn't) use the same cable and the same USB port.
    Also, are the two iPhones the same model and same iOS version?

  • HT1212 my ipod touch is locked, i know the password although then i go to enter it nothing happens its as if the touch  screen isnt working, is there any way i can repoot the factry setting completely?

    My ipod touch is locked, i know the password although when i go to  enter it nothing happens it as if the touch screen isnt working, i have held down the power and home button to reset it, it works for a second then stops working again. is there anyway i can completely reset the factory settings

    Try the remaining items of:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer          
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • TS1538 My 4 month old iPhone 5s stopped charging, original cable with adapter works fine on other iphones

    My 4 month old iPhone 5s stopped charging, original cable with adapter works fine on other iphones.
    I have tried restarting iPhone while its connected to my macbook pro and when it restarts, I see it starts charging again.
    After this, when I plug phone to wall outlet, it works perfectly and charges but next day again it stops charging.

    Will Apple cover this under warranty if the port is damaged due to unknown reasons as its under 1 yr warranty?
    Also, I am out of USA now and would like to know if I can send it through a friend and get it checked out by Apple tech...
    Never has any iPhones of all generations that I owned gave such problem.

  • Where should I go to replace the connector port on my 6th gen ipod classic

    My head unit on car Pioneer stereo w/usb port intermittently loses my ipod and  have to cycle through devices to see it again. sometimes i have to reconnect to usb cord for it to work. I suspect the connector port is damaged. I used to have a cord with push buttons to retain the connection and it was pulled free several times without releasing the retainers. Doh. Where can I repair this reasonably and if I do should I throw in a new battery? It's 3/4 years old.

    Google iPod Repair service, hopefully there is one in your Area.

  • How do I determined if the USB ports are working?

    How can I determine if the USB ports are working.  Macbook Pro i7.
    Thanks for any help.  This is a new computer to me migrating from a PC system.

    Blessings to those who are able to reply with possible answers.   I am sorry....but I have spent days working on getting my two USB ports to work also.  I basically use the USB ports for a wireless mouse and various flashdrives/memory sticks.  I have a MacBook Pro 2011 Snow Leopard 10.6.8  I have tried software update, SMC and PRAM resets, battery reset, hardware test, creating a new user account....and browsing and reading numerous discussion boards.....awgh!  I have stopped short of using my install DVD (fear of loosing data), upgrading to Lion or Mountain Lion (some fear of loosing an application that might not be compatible), contacting an Apple Store (AppleCare or whatever--live 2 hours away + fear of expense), and of course, trashing the laptop.  Does anyone out there have any possible solutions?   I see I am not alone.  --A frustrated first-time Apple products owner.

  • LaserJet Pro 400 MFP not working on the network port that works HELP !!!

    I have a new LaserJet Pro 400 MFP (M425dn)    USB works fine.  When I remove the USB and plug it into the network Port no network can be found - It doesn't pick up any activity.  So I test the network with my laptop ( connectivity is confirmed ). The network port is working properly- I plug in the LaserJet Pro 400 MFP (M425dn) and restart it -  no network activity. I tried several ports in the front office and the printer can't connect to the network.  BUT HERES THE FUNNY THING .  If I take the printer to the back room where the router/switch is  and plug it directly into the switch
    ( the same port as the front port )   it works !!!!!     so why doesn't the printer work at the front office network port,  where all the other devices work just fine using the same port ?  But it will work, at the  router/switch  using the same port  lol    this is drving me crazy  
     any help ? ? ?

    I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at http://h30499.www3.hp.com/hpeb/
    I hope this helps.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • How many hours should stop charging the macbook pro retina first before using it?

    How many hours should stop charging the macbook pro retina first before using it?

    There is no requirement to charge for any predetermined amount of time. You can charge at any time, for any amount of time.

  • My iphone 5 suddenly stopped charging.  It's not working on any of my charging devices or with the apple charger

    Just yesterday my IPhone 5 stopped charging.  It won't charge on any of my docks, nor from the computer or from the charger that comes with the phone.  Anyone have this problem and know what to do to fix it.  I don't want to upgrade to the IPhone 6, I like my Iphone 5.

    Hey Fran0417,
    I understand your iPhone is not charging no matter what you connect it to.  You have tried different charging sources.  To further isolate, have you tried more than one cable?
    Going further, please check out this article
    If you can’t charge your iPhone, iPad, or iPod touch - Apple Support
    If the battery doesn’t charge
    If the battery doesn’t charge, unplug your device and try these steps:
    Look at the connector at the bottom of your device and make sure it’s free of debris.
    If you're using a USB power adapter, make sure it's plugged in all the way and the power outlet is working. If you're connecting to a computer, make sure it's on and can charge your device. To charge an iPad, you might need to use a USB power adapter and plug into a power outlet.
    Try a different USB cable, USB power adapter, or USB port.
    If everything seems to be working, reconnect your device and wait for 30 minutes.
    If your device still doesn’t charge, try to restart it while it's connected to power. If you can't restart, reset your device.
    If that doesn't help, continue with the article to the end.
    Regards,
    Nubz

  • My Ipod touch (3rd. gen) is locked and the touch screen isnt working and it only turns on when charged! help!, My Ipod touch (3rd. gen) is locked and the touch screen isnt working and it only turns on when charged! help!

    My Ipod touch isnt working ... i think its locked but the touch screen now doesnt work? Help!

    Connect the iPod to your computer and charge it for at least an hour and then try to restore the iPod via iTunes on your computer.  If it asks for an passcode and you do not know it place the iPod in recovery mode to bypass the the passcode.  For recovery mode see:
    iPhone and iPod touch: Unable to update or restore

  • IPod connector port not working

    Hi all,
    I have a 160gb 7th gen iPod classic (also plays videos).
    I've had this style iPod since around October of 2010. I had a problem with the first, brought it to the Apple Store, and received a new iPod in exchange. I'm not sure when this happened, perhaps a couple years ago, so the actual age of this current iPod is only estimated at best at two years old.
    Recently my iPod stopped connecting to everything. The iPod works fine, plays music, etc., but it will not connect to anything through the 30 pin connector port at the bottom of the unit. To date, I've tried connecting it to two different PCs, two different types of wall adapters (both on a surge protector and directly into the wall), multiple cords (old fatties and new slims), and my car which has a USB hookup for iPods (that I've used for years; this is where I first discovered the connectivity problem). My radio says there is a USB error and my computer won't even register that something is plugged in.
    My problem now is this: because I'm so far out of the warranty range, I'm afraid that Apple is going to bend me over for repair costs, not to mention the closest store is over a half hour away and my free time is very limited. I'm handy with electronics so I started looking into doing the repair myself, but I can't find the right parts. The customer support gent I spoke to said it was most likely a 30 pin connector but the only 30 pin connectors I can find online seem to be for the iPod Touch. I'm also unsure as to how many other parts could be messed up, like the wires from the 30 pin connector to the board, or perhaps some other small parts I'm unaware of.
    Any guidance in this situation would be much appreciated!

    Have you tried doing a hard reset yet? To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.   Don't be afraid to try this more than once if necessary.
    B-rock

  • HT3986 when installing win 7 pro on my macbook pro retina and win drivers that download from bootcamp the USB ports not works

    please som eone help me to make the USB ports on my macbook pro retina works, as its stopped just when using win 7 pro after complete  installing the win drivers

    I catch the point;
    I was opned device manager on windows then found devices unlnown ( USB3) as the boot camp downloaded from the internet not define this USB3 port, so, I installed it by searching online for this drivers.

  • Does the LAN port really work for wired internet?

    Ok. So I've seen this question asked, but nobody ever seems to come back and say "great, it worked!". If I have my AEBS connected to my DSL modem via the WAN port, Set up with my PPPOE info and set to distribute IP addressess and WDS on, can it also distribute to my desktop via the LAN port. I've seen many yeses, but I can't get it to work. The iMac also has an Airport card, and both it and my MAcBook can get to the internet fine. Also, if I set up the iMac for ethernet and connect it directly to the DSL modem (with the PPOE info in the iMac), it can also connect no problem. However, if I set the iMac up for ethernet and to get it's info via DHCP, and connect it to the AEBS LAN port, it doesn't even show an ethernet cable is connected. This leads me to believe that the LAN port is disabled in whatever config I have going with the AEBS. Any help would be great. Thanks.

    FYI, after further testing, it appears my port is loose? If I hold the cable and press firmly into the LAN port, I get a connection. if I let go of the cable, I lose it. So, if I bend the cable under the unit and scotch tape it in place... no problem. It is a refurb unit. Oh well.

  • I was trying to update and sync my iphone 4, the process stopped, now the phone does not work and itunes appears not to "see" the phone? suggestions?

    I was trying to sync and update my phone with ITunes, about 5 minutes into the process everything stopped.  Now the phone does not work, it will not turn on or off, the screen of the phone shows the Apple Logo and a straight line.  ITunes seems to not "see" the phone.  Suggestions??

    http://support.apple.com/kb/HT3965

Maybe you are looking for