Iphone4 strange message details pop up

I got a strange message pop up on my phone today.  The window was the standard blue color.
Message said:
Message Details
message_id:
1324472950343_1529214211
upload: unknown
download: complete
There was no option to cancel.  Only the OK tab at the bottom of the window.
Does anyone know what this is? I've searched online and have turned up empty.

Not exactly.  I did have the question posted elsewhere and received the following responses:
*   It looks like you were in an app that had some debugging left-overs in it.
*  Sounds like a developer forgot to comment out some code for production.
And i dont know if this is related or not, but not too long after my phone locked me out. I have always used the same password and from literally one moment to the next the phone would not accept it. I had JUST accessed my phone as normal and less than 10 minutes later I was denied. In the end I had to restore the phone to factory settings and lost everything on there. My fault for not backing this up on the computer though.
Ever since the restore, everything has been working fine.
I would say if you can, for peace of mind, restore your phone.
Good Luck!

Similar Messages

  • Strange message keeps popping up on Safari

    Hi folks,
    I keep getting a message popping up saying:
    There is no application set to open the URL httpss://b3-uk.mookie1.com/2/Radium_One/Volvo/Activation_Q2_2014/WRAPS/0414/1$1 401900025465@X50?.
    I haven't the faintest idea what this is, I haven't ever tried to open that URL. The popup appears every few minutes every time I browse the web. Does anyone any suggestions as to how to get rid of it? (I've tried quitting and restarting Safari and rebooting the computer, but can't think of anything else!)
    Many thanks for any help you're able to give.
    -Kitty

    OK, note "accessory" not "application" ... You get this message when you plug the iPhone into some device, usually made to work with iPods but not iPhones. Such combinations may cause extraneous radio interference, so it invites you to switch to airplane mode when using it.
    Now, if you are getting the message without plugging into anything, that is an error ... it could be a bit of dust in the connector or something ...

  • I have been trying to update my apps on my iphone4 and a message keeps popping up saying "please verify you account" i try to varify my account and it keeps saying that my security code is "invalid" i have the card in my hand and i know its right

    i want to update my apps on my iphone4 and when i go to update them a message keeps popping up saying "sign in to varify your acount" i sign in then it takes me to a billing page i put in all of my billing information and it says security code wrong i i have the Mastercard infront of me every time i try to do this and it tells me that i have an "invalid security code"

    Might be an address formatting issue with your iTunes account records.  See http://support.apple.com/kb/TS1646.

  • When I am using Premiere elements 13 I get a message that pops up "that there is no disk in the drive. Please insert a disk into drive", this also happened 3 months ago How can I get rid of this again?

    When I am using Premiere Elements 13 I get a message that pops up "There is no disk in the drive" I click on it and it keeps coming back "very annoying", but about three months ago it happened to me and I was told to change the file name from OldFilm.AEX  to OldFilm.AEXold. Well now the file is back in Folder OldFilm.AEX. Here is a screen shot the files are highlighted.What should I do now to correct this once and for all, or can I? Thank you for your time.

    TomWolves
    I would do another rename to disable or just delete all the OldFilm.AEX and OldFilm.AEXOLD in that NewBlue Folder.
    If you do, please let me know if that OldFilm.AEX regenerates itself the next time you open Premiere Elements 13.
    Here is the strange story...at least from my Premiere Elements 13 Windows perspective...never had the No Disc error issue
    Here are some details to sort through trying to figure out why you have 2 OldFilm.AEX file in the NewBlue Folder.
    1. The original OldFilm.AEX file of Premiere Elements 13 has the date of 9/4/2014 (just before the version was released on 9/24/2014).
    After the 13.1 update is done (whenever date), that OldFilm.AEX file has the date of 1/31/2015. I first saw notification of the 13.1 Update
    release early in February 2015.
    2. Now in Premiere Elements 13.1, if I take my OldFilm.AEX (date 1/31/2015) and disable it by renaming it to OldFilm.AEXOLD, close out of there, and reopen
    the program, the OldFilm.AEX is not seen to regenerate. The OldFilm.AEXOLD remains there as its lone self.
    3. So, I am thinking that your OldFilm.AEXOLD in the screenshoot is "original equipment" that you disabled to get rid of No disc error.
    Why the OldFilm.AEX is there also is not clear, but the dating on it suggests that it came along with the 13.1 Update.
    Bottom line: let us try the deletion or disabling one more time and see what happens.
    Looking forward to further reports on your findings, as your time permits.
    Thanks.
    ATR

  • My phone will randomly disconnect from the wifi and when I retype the password it says it is wrong. It will eventually work but I have to wait for a message to pop up on my screen to allow me to retype the wifi password.

    When I first got my phone it worked perfectly fine with the wifi. Although later on I began to have problems connecting it. It will randomly disconnect from the wifi and when I try to retype the password it tells me it is wrong, although it is right. It will eventually work but in its own time, a message will pop up and allow me to type in the password and it will work. But sometimes it takes an hour or more and sometime it takes 10 minutes. I've seen where other people have had this problem but I don't know how to fix it. I'm not sure if it's an issue with my phone or if it's with my wifi. Does anyone know how to fix this?

    Does this happen with all Wi-Fi hotspots?  A specific one?
    Have you tried forgetting the Wi-Fi connection and then reconnecting to it?
    What about power cycling the Wi-Fi router?

  • How do I get Firefox to display the information bar when a pop up is blocked I accidentally clicked on "Don't show this message when pop-ups are blocked" when a pop up was blocked. How do I get this message to reappear again when a pop up is blocked?

    I just updated Firefox but can't get it to display the message when a pop-up is blocked. Most times I want them blocked but sometimes I need them enabled.

    You can see a pop-up block icon in the right corner of the Status Bar if you have chosen to hide the information bar at the top.
    You can left-click that pop-up block icon on the Status Bar and remove the check mark from "Don't show info message when pop-ups are blocked"
    You can look at these prefs on the '''about:config''' page and reset them via the right-click context menu:
    Status bar icon: browser.popups.showPopupBlocker
    Info bar at the top: privacy.popups.showBrowserMessage
    To open the ''about:config'' page, type '''about:config''' in the location (address) bar and press the Enter key, just like you type the url of a website to open a website.
    If you see a warning then you can confirm that you want to access that page.

  • There is a message that pops up and it says that my computer is infected???

    there is a message that pops up on the screen of my macbook pro that says that my computer is infected and has some kind of virus. what do i do to get rid of it?

    hi this is what to do!  
    http://blogs.pcmag.com/securitywatch/2011/05/how_to_remove_macdefender.php
    http://www.reedcorner.net/news.php/?p=138

  • Warning message in pop up

    Hi,
    I have a requirement where i have to get a warning message in pop up,
    Please suggest me, if anyone knows any function modules, Pl let me know
    Thanks & Regards,
    Kirthi

    Use your message as "I" it will be poped-up..
    Ex: MESSAGE I001....
    OR
    Use FM 'POPUP_FOR_INFORMATION' OR  'POPUP_TO_CONFIRM'
    Close the thread once your question is answered.
    Regards,
    SaiRam

  • I'm trying to share to Media Browser a 20 minute still slide show with music and text. I have tried several times to save at 1080 HD, but just before it's finished, a message box pops up saying "File already open with write permission."  What's this mean?

    I'm trying to finalize/share to Media Browser a 20 minute still slide show with music and text. I'd like to finalize it 1080 hd and have tried several times, but just before it's finished, a message box pops up saying it can't be done because "File already open with with write permission."  What does this mean?  All files are closed; this iMovie project is the only thing open.  Does it mean one of the song files from iTunes? And should I just settle for saving it as a "large" file, which is what I'm trying right now?
    Thanks,
    Jamie

    Hi
    Error -49 opWrErr  File already open with write permission
    Trash the preference files while application is NOT Running.
    from Karsten Schlüter
    Some users notice on exporting larger projects from within iMovie that this operation is aborted with an 'error -49'
    This issue occours only on MacOs machines using 10.7x
    try switching-off the Local Mobile Backup
    in Terminal copy/paste
    sudo tmutil disablelocal
    Re-launch Mac
    See also this post
    https://discussions.apple.com/thread/4434104?tstart=0
    Yours Bengt W

  • A message will pop up (Exc in ev handl: Error: Bad NPObject as private data!) and the tab I was on will close out and reopen in a new window. Why is it happening and how do I stop it?

    Okay, I will have a window open with 4 tabs open. At first, everything is fine, but after a day or so, a message will pop up on screen saying "'''Exc in ev handl: Error: Bad NPObject as private data!'''" and after you close it out, the tab you were on will close and reopen in it's own window. I then have to shut down all both old and new windows and open a new window with my original 4 tabs again. It will work fine until a few days pass and it starts over again.

    This issue can be caused by the McAfee Site Advisor extension
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

  • Detailed pop up screen in selection screen - urgent

    hai experts,
    how can we give a detailed pop up screen in selection screen.
    My requirement is,
    To display Details of spool Nos taken for current porogram to take print out from end user.
    from OWN SPOOL REQUEST displays all other programs........
    can any one give a right solution?
    reward will avail for use full answer.
    thanks in advance.
    regards,
    jai.m

    Hi Jai
    May be you can use this FM POPUP_WITH_TABLE_DISPLAY_OK with the list of spool number populated into internal table.
    If you are particulary looking for selection screen, then decalre your selection screen as below
    Selection-screen begin of screen 9000.
    Selection-screen end of screen.
    Then use the statement Call selection-screen 9000 starting at x y.
    Hope this helps !
    Regards
    Ranganath

  • I have Firefox 3.6.13 and this message just popped up tonight

    I have Firefox 3.6.13 and this message just popped up tonight while trying to download and listen to the Audio or the Video download. This website has both an audio and video version of the program. I was able to fix the audio by removing Firefox and reinstalling it. The second message (below) keeps popping up when I try to download and view the video version of the same program. The site has both Audio and video and I can listen to the audio using Real Player but I still can’t watch the Video period. I get the Video message below? I do not have this problem using Opera 11.01
    Audio: Ok now, fixed by reloading Firefox
    C:\Users\Gary\AppData\Local\Temp\300-024-16.mp3 could not be opened, because the associated helper application does not exist. Change the association in your preferences.
    Video:
    C:\Users\Gary\AppData\Local\Temp\WorkingInvestor20110202.wmv-3.wvx could not be opened, because the associated helper application does not exist. Change the association in your preferences.
    How do I fix this, again the Audio using Real player is OK but not the video?

    Caused by the Ask Toolbar extension in Firefox 3.6.13, disable that extension or un-install it.

  • How to stop an error message that pops up every time I open Safari. It reads...Safari 5.1 (v6534.50) has not been tested with the plugin PithHelmet .As a precaution, it has not been loaded. Please contact the plugin developer.

    How do I stop this error message from popping up every time I start up Safari ?
    Error message reads...
    Safari 5.1 (v6534.50) has not been tested with the plugin Pithhelmet 3.0b6 (v 3006)
    As a precaution, it has not been loaded. Please contact the plugin developer.
    I have removed every trace of Pithhelmet, (via spotlight)
    Trashed the preferences for Safari, restarted computer to no avail.
    It just  keeps keepin on.
    Thanks

    In the past I was able to bypass the message by editing the Info.plist file and updating the MaxBundleVersion variable, but not so this time around. As of today the developer seems to indicate there's no immediate fix becuase of how Safari 5.1 handles multiprocess page rendering. Probably best to stay tuned to Mike's website for now.

  • Problems installing plug-ins (and even Adobe updates) to Photoshop CS5 Extended on a new Win7 64-bit laptop.Instead, a message box pops up on the CS5 screen saying "could not complete your request because it is not the right kind of document."

    Problems installing plug-ins to Photoshop CS5 Extended on a new Win7 64-bit laptop.  (Same CS5 and plug-ins installed OK several years ago on a Vista laptop.  Now I'm just trying to migrate everything over to the new laptop.) Even some Adobe updates won't install.  Instead, a message box pops up on the CS5 screen saying "could not complete your request because it is not the right kind of document."   Any solution?

    CS5's automatic update mechanism is broken, perhaps because it is no longer updated and can't cope with the newer ways of updating.
    So this means you will have make a list of the updates that failed, go here: Product updates
    and manually download/install from there.
    Gene

  • Strange message when logged in to bpel console

    Hi All!
    I just installed bpel on my linux machine. After starting the bpel server and logging into the console I saw this strange message:
    Cannot find instances.
    An attempt to fetch the instances using the where condition " ( ci_state = 1 OR ci_state = 2 OR ci_state = 3 )order by ci_modify_date desc " from the datastore has failed. The exception reported is: ORA-00942: table or view does not exist.
    Please check that the machine hosting the datasource is physically connected to the network.
    Also I created a pl/sql helloworld webservice, and a bpel process to invoke it through a partnerlink. After deploying it to the default domain I see only name of the bpel process in the deployed processes list unlike both the bple process name and the webservice name.
    The linux flavor I am using is fedora red hat. The database is oracle 10g on the localhost itself. The bpel version is 10.1.2.0.2.
    What could be the cause of these problems. I feel the second problem is because of the first problem that is there. Any suggestions and solutions please.
    Thanking in advance,
    Regards,
    Deepika.

    Hi All!
    Ran the script for the view generation. Found it in domain_oracle.ddl. Granted dba privilege to orabpel to execute the script. Redeployed the bpel process. Now no error is there and the bpel process works fine.I think to successfully install bpel on linux box orabpel needs admin privileges.
    Regards,
    Deepa.

Maybe you are looking for