Iphone4 video output via composite av cable

Hi, this questions probably been asked loads of times but I haven't found an answer , hence , can someone please tell me how to switch on video out on iPhone 4 on 5.1 , I bought composite cable but no video just audio . Can any1 out there help. Thank you

iphone4 and composite and component cable don't support mirror so they
only display images when an supported app is being used like youtube or the video app and the likes
use both the composite and the component cable with my iphone4 on 5.1 and both works fine
so do my ipod touch with 5.1 and ipad2 with 5.1

Similar Messages

  • I use Keynote on iPad2. Video out via composite AV cable, audio out through earphone socket. If I plug into the earphone socket first, then the AV cable - no sound. AV first, then earphone - sound. Anyone know why?

    I use Keynote on iPad2. Video out via composite AV cable, audio out through earphone socket. If I plug into the earphone socket first, then plug in the AV cable - no sound. AV first, then earphone - sound. Anyone know why?

    My daughter has had her Razr for about 9 months now.  About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

  • Video output via composite cable & video output on iPad screen

    Is it possible to have the video play on the iPad simultaneously as it outputs to composite cable? Whenever I play a video with the composite cable plugged in, the iPad displays a screen shot of a random video (same screen shot every single time). It's a complete mystery to me. Any ideas?

    It sounds normal to me. The composite and AVGA out on the iPad do not mirror the the iPad's display as you found out. However, there may be some apps that will show video on both screens.

  • Video output via cable - incompatible with video p...

    I find that although video output via cable from the Nokia 6220 classic (and I presume other Nokia phones) works fine with TV sets, I haven't found a single video projector that accepts the output and is able to project it.  The projectors typically search their video inputs and should recognise the composite video input, but instead they just keep searching and are never able to recognise or project the video.
    Is there something unusual about the video signal output from it so as not to be accepted as composite video by video projectors?

    iphone4 and composite and component cable don't support mirror so they
    only display images when an supported app is being used like youtube or the video app and the likes
    use both the composite and the component cable with my iphone4 on 5.1 and both works fine
    so do my ipod touch with 5.1 and ipad2 with 5.1

  • Problem with playing video via composite av cable on iPod classic 2009 model 160gb

    Things went well, after  purchasing the new Ipod classic 160 gb i tryied to watch movies on my LED TV via Composite AV Cable.  I did it once. Everything worked correctly & I was able to see my photoes, watch movies.  Today i tryied to connect it again to the TV via av composite cable. The TV Out was switched on. But i could hear only audio. No video. I tryied all possible configs for Ipod an for tv set & no result. If i choose on my Ipod to ask me  first if i want to switch on the AV out, the Ipod shows me a message that i should connect the video accessory (but it  is already connected!). If i choose simply to switch on the TV Out without asking  me it will play either sound only on the TV, either the playback on the Ipod is ending after 20 seconds of show time.
    Without AV Cable connected Ipod is working normaly in terms of video playback. Also the device is working normally with the ITunes.
    Please help. Where is the problem. The AV composite cable? TV set? Or iPod itself?

    Hi Rusbug,
    I am having the same issue with my iPod Classic 160gb not playing video on the TV via Composite cable as you posted in march!
    did you get a solution for the issue??
    desperate to know what to do next.
    thanks

  • How can I get an AIR application to a video output via DeckLink card with alpha channel?

    Hi there!
    Anybody knows how to get an AIR application to a video output via DeckLink card with alpha channel?
    The reason is because we want to develope tv show games with air.
    Thanks.

    See if these have iMac Nvidia drivers:
    http://www.laptopvideo2go.com/drivers/

  • Nano video output via headphone socket?

    Can the new Nano video output to the TV via the headphone socket, like my iPod Video 80g?
    Thanks.

    Trip to Apple store and Genius Bar (Genius my a**e!), where I had a 2 hour wait, 20 minutes with the Genius (I use the term lightly) to be told what I already knew, plus he thinks the headphone output is connec ted to main logic board and that will cost almost £300 for parts. Dream-on!
    On the way home I purchased a £8 Toslink cable (£32 in Apple store) plugged it in and hey presto - perfect sound.
    So it looks like the headphone socket is stuck in digital mode.
    Well at least it's getting better. Now off to research & establish how many other folks report same issue.

  • Video output via FW deck

    Running on MBP in the field, can I monitor Color video out via FW connected to DVCPro deck then out to NTSC monitor? FCP outputs fine. In Color the video output selection is greyed out... jPo? Shane?
    Thanks

    Thanks.
    That's too bad, it'd be nice to show some options on set with a basic FW interface... wouldn't wanna schlep all that gear around...

  • Displaying video using "Apple Composite AV Cable" to an in car DVD player

    Has anyone had any success or knows of any in car dvds/screens that will enable you to display video from an iPhone/Touch. Im assuming we would need to use something similar to Apples "Apple Composite AV Cable". To be honest I really only want to show videos from my iPhone/touch... if the screens didn't have dvds I really would care..
    Thx

    Your best bet would be to find a car head unit with either a composite or component input. From there you would just use the appropriate cable from the Apple Store.

  • Movie Rental quality via Composite AV cable

    I jsut received the composite AV cable for my Iphone. If I rent a movie thru ITunes and download to my Iphone, what will the quality be like on a 42" HD projection TV? I have attached the Iphone and played Youtube videos on the TV and the quality is low. Hopefully the resolution with rented Itunes movies is better. Anyone experienced this yet? Thanks

    I have not done the same but I did rent a movie with iTunes and transferred it to my Apple TV to watch it with my 42" HD Plasma. The quality was good but I don't believe Apple has started providing movies for rent in HD quality yet.
    The rental fee isn't much so give it a go and let us know the results.

  • Video Output via VGA "not authorized"

    I have the VGA output cable for my iPad, but on my newer videos, it gives me an error message that the display is not authorized to view the content. Do you perhaps know how to authorize a display?

    Rental movies and maybe some other purchased videos will not display on video out because of licensing reasons. There is really nothing you can do.

  • Is there an iPod touch model which will work with a video projector via an HDMI cable?

    I want to use an iPod touch to use an app called iSing Worship in our church. This app plays worship songs and enables the lyrics to be projected on a screen using a video projector. Is this possible and if so, which model iPod touch will I need to purchase?

    - If that app supports TV out,the app description will say, then you need a 4G or later iPod and the HDMI/Digital adopter cable. You can also use and Apple TV abd Airplay to the Apple TV
    - If the app does not suport TV out then you need a 5G iPod since the 5G will mirror the iPpd's screen, Yu then need
    - Via Airplay to an Apple TV.
    or this cable.
    - http://store.apple.com/us/product/MD826ZM/A/lightning-digital-av-adapter?fnode=3 a

  • No video output via hdmi

    I have a brand new Apple Mac Mini that was just delivered via Fed Ex a couple of hours ago.
    I CANNOT get video to display over HDMI on my 50" plasma. When I comnect it and boot all I see is "no video input."
    I have a newer, smaller Sharp plasma that will show the Apple start-up/splash screen for 15-20 seconds then the screen goes black.
    I think the resolution in the settings is too high for my mini but how do I change if I cant see the **** screen?
    I believe both of these TV's max out at 720p.
    PS. AppleCare Support wants to send me another computer but I can guarantee it isnt a hardware failure.
    Any thoughts?

    Well, BSteely, where to begin? After my extensive discussions with more than one support engineer at Apple in Toronto as well as in Austin an interesting picture is emerging. Seems that I'd omitted a few things: First, I was not trying to display HD content but rather standard definition content. Second, I made the mistake hoping for an elegant and easy solution in hookup via HDMI (new flatscreens don't even have a DVI port anymore) - bad mistake! As one of the technicians put it, HDMI is an "unsettled" platform when it comes to HDCP, currently in version 1.4 , meaning, I should have tried VGA instead, a "settled" platform after all. Now, whether this will work remains to be seen because I don't have a micro DVI to VGA adapter yet but suffice to say that in essence I've been getting the message from Apple that, yes, the MacBook Air will - in the near future - support HDCP, but for now it does not contain the necessary software simply because HDMI is in its forth incarnation; plus, as they put it, Apple can't be responsible for testing compatibility with every single HD television set on the market - while it is true that there are thousands in existence, at the same time there are only four versions of HDMI with different HDCP specs! So, while I may be partially answering my own query here, it seems that Apple at this point is not particularly eager to make this software available because they rather would like to sell their new displays with the micro DVI ports instead of us endusers being able to hook the computer video signal up to just ANY monitor or TV. In the end, it is my hope that they will reconsider and not forget who their customers are, maybe after the Christmas season....

  • Can I get HD Quicktime video output via Windows 7

    How can I put this.  I have a fellow employee to states that it is impossible to produce HD quality QuickTime via via Windows 7.  Is this an accurate statement?

    Not true.
    If your source files are in high definition format you can edit and export via QuickTime Player Pro.

  • What settings need to be adjusted to send out Dolby digital ,DTS from inputs such as Netflix to the video output via an adaptor to HDMI?

    Hi. I can only stream picture and PCM out of my Mac BookPro. What settings need to be adjusted to output Dolby Digital or DTS to an HDMI adaptor had thence onto my AV Processor?

    The Audio Midi Setup utility may need to have its settings updated.
    That's if you have the right adapter:
    https://discussions.apple.com/docs/DOC-2821

Maybe you are looking for

  • Memory does not get released after encrypting/ decrypting files.

    I am using javax.crypto package to encypt/decrypt files but the problem is that once a big file (around 100- 700 mb) is encrypted there is spike in memory of 70 Mb (first time) and whole of this memory is not released after execution is finished. I h

  • Forms Central user ID

    I teach high school chemistry and would like to try using forms central to give an on-line test/quiz in my class. Does the form I create report back results such that I can identify the responder and assign a performance grade to them?

  • Itunes 8.0 doesn't start up

    hi there, i just downloaded and installed the itunes 8.0 update on my macbook pro with osx 10.4.11 when i start it up, the icon bounces in the dock, the little black triangle is visible, but then it just goes again, and itunes does not start up... i

  • DAC task shows as Running when in fact Informatica workflow is completed

    Good day, My environment: Dac Build AN 10.1.3.4.1.20090415.0146 , Windows 2003 Server Release 2 Informatica 8.1.1. SP5 0129 135 (R117 D86) , Windows 2003 Server Release 2 I am having two separate issues with a DAC execution plan. 1.     During the ru

  • Connection pooling implementation in struts

    hi I want to implement login process in struts but now i m facing problem , I have written the code for connection pooling but now m in confusion where to call this code bcoz it should be called at once if not called earlier, so that i can use this c