Iphone4 will not power on what do i need to do?

iphone powered down and will not power back up what should i do

Hello there, sabrina38.
The following Knowledge Base article provides some great recommendations for troubleshooting your issue:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Particularly:
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
My issue is still not resolved. What do I do next?
Contact Apple Support.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Similar Messages

  • Iphone4 will not power up

    iPhone4 will not power back up, it has been charging for hours

    If it needed to be plugged in several times a day to work "fine," then it wasn't working fine.
    If a reset doesn't work, make a Genius BAr appointment and they will run some diagnostics on your phone and tell you the problem, and since its under warranty, will fix it too.
    Make sure it's backed up before going to the Apple Store. They may give you a new phone.

  • HT3546 my airport will not power on, what are the possible causes?

    My Airport just shut off and it will not power on. I unplug it from the wall and pulg it back into the power outlet but it still won't power on. What are the possible causes. Is this system just died out, I have it for about 3 years.

    Causes....a failed electical power supply component or an internal connection that has come loose.
    It's a real longshot, but if you are handy with small tools, carefully saw open the case of the Express along the center seam to open up the case and look for something obvious.
    Your chances of success here are very very small, but if you have the time and inclination, it won't hurt to try.

  • New iphone4s will not power on

    Just got it shipped to me today took it out of the box and it will not come on, changed it for an hour and it still will not power on?

    I too had a similar problem.  The brick went bad.
    I had to use a Fluke meter to measure the voltage at the tip, as there is no light on the brick, nor is there a functional light on the computer.
    Yes, it is supposed to flash a couple of time if there is juice in the wire, but my issue, was that it supplied power, but failed under computer drain initially, until it gave up.  My screen kept flashing when power was on, and power was off.  Effectively, the screen became my power indicator.
    Having had similar issues in the past with switching supplies that had a thermal breaker built in, I waited hoping it would reset.  BUT, no light on either the brick or the computer, just wasted my time trying to solve the problem the normal way.  If there was a light, you would know immediately.  It finally gave up life, and never revived.  No light on the brick, and NO indicator light on the W540.
    The new brick was made by another vendor, and runs much cooler.  If you want the markings on the broken brick, v.s. the new one, just ask.....
    Not acceptable, but stuck with this.....  At the end of the year, someone at Lenovo will get a raise, based on sales.... 
    My productivity is going down!

  • My iPhone4 will not power on

    My iPhone 4 will not power on.  I have tried to charge it, but it will not charge.

    I have the same prob

  • I have OS 10.8.2 and use wireless at home just fine. When I visit a friend with only a cable modem internet my Mac Book Pro will not connect. What do I need to do?

    I have OS 10.8.2 and use wireless at home just fine.
    When I visit a friend with only a cable modem internet my Mac Book Pro will not connect.
    I see that the Mac Book Pro is picking up the internet when I check the internet preference section but it will not open Safari.
    What do I need to do connect via a cable modem?

    You need to power off the modem for 15-30 seconds, then power back up and then connect. The modem is remembering the last connection (your friend).

  • My ipod will not unlock. What do l need to do about it?

    My ilod will not unlock what do l need do do about it?

    If you cannot remember the passcode, you will need to Restore your device...
    Connect the Device to the iTunes library you Usually Sync with, open iTunes, click on the Device tab that appears in the Left side column of iTunes, Select your Device, then go to the Summary Page and click Restore.
    If necessary Place the Device into Recovery mode...
    See here,
    http://support.apple.com/kb/HT1808

  • Uploaded iphone 4s to ios7, now my phone will not activate. What do i need to do to get it back?

    I just recently updated to iOS7, then this evening I TRIED to upload the next version. Now my phone will not activate with my Verizon account. The phone has no service in an area where I have 5 bars on my Wi-Fi. But yet my phone will not activate.

    what message does it display?waiting for activation?

  • Had to reset my ipod classic now itune will not recognize it, what do i need to do?

    I had a problem with my ipod classic, stopped before songs were finished, long pauses while it ran through songs on shuffle mode, so i reset it.  I finally got it back but now my i tunes will not recognize my i pod.  What do I need to do?
    BWM

    Hello Jeanne
    If you are having issues with your iPod not showing up on your computer then check out the article below. What you need to figure out is if it does not show up at all or if it is just iTunes.
    iPod not appearing in iTunes
    http://support.apple.com/kb/TS3716
    Regards,
    -Norm G. 

  • ICloud Control Panel will not install! What do I need to do?

    I have tried running the installer but it fails with the following error message:
    "Could not update the ini file C:\Windows\system32\mapisvc.inf."
    What is going wrong & what do I need to do to install iCloud Control Panel?
    N.B. I am using a laptop with Windows Vista installed, with Service Pack 2. I have also installed ALL updates.
    Does it have anything to do with the fact I don't use MSOffice?
    Thanks for your help

    1. You need to disable the User Account Control (AUC) in Windows control pannels, otherwise next steps may not work.
    2. You need to locate the file, right click it and select properties - security - advanced - owner tab; click on edit and select your username (the current Windows account), press ok.
    3. Then within the security tab, select your user account and grant the full control to yourself (first box needs to be ticked). Press ok.
    Then try the installation again. This worked for me.

  • HT4623 I have a iphone 4s.  I let it upgrade to new OS.  It will not get past the icloud terms and conditions.  I've view them and agreed many times.  It will not proceed.  What do I need to do?

    I have a iphone 4s.  I let it upgrade to new OS.  It will not get past the icloud agree to terms and conditions.  I've review and agreed to all conditons.  It just stays on the terms and conditions.

    It's so simple.  Press Cntl+Alt+Del, I mean, just like Microsoft, reboot and try again.

  • Trying to connect my mac pro to a officejet 7500A printer having troubles, mac will not download it. what do i need to do?

    What do I need to do to set up my officejet 7500A printer to my mac pro?

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page): 
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • LR will not install! What do I need to do?

    I don't know what to do. I just joined CC for $9.99. Everything else downloaded and installed, but LR downloads and then fails to install. What do I need to do? This is what it says:
    Exit Code: 7
    Please see specific errors below for troubleshooting. For example,  ERROR: DW006 ...
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 2 error(s)
    ----------- Payload: AdobeLightroom5CCMPkg-mul 5.2.0.0 {4b06fc24-6249-4c57-9830-6008a3ce9a80} -----------
    ERROR: DW006: Apple Package failed to install successfully.
    ERROR: Third party payload installer Adobe Photoshop Lightroom 5.pkg failed with exit code: 1

    http://helpx.adobe.com/lightroom/kb/exit-code-7-displays-installing.html

  • Received call that went to voicemail, phone alerted voicemail and then went completely dead, will not power up, what can i do?

    my I phone 5 went completely dead after receiving an incoming call that went to voicemail and alerted, i cannot power back up, what can I do?

    Try a reset. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. If you are sure the battery still had a charge, this should work. If you think the battery was low, then plug it in and let it charge for at least 20 minutes and then try the reset.

  • I had to get another phone from the Apple store...now the wi-fi will not connect..What do I need to do short of going back to the Apple Store again for the 4th time?

    I am having trouble getting my wi-fi to connect...this is the second phone I have gotten...any solutions before I have to make my fourth trip tp Apple?

    Is this the same problem you have been experiencing?

Maybe you are looking for

  • Error while opening a screen painter

    Hi all, I am trying to modify a screen in SE80. But when i am clicking on the screen painter it shows 'EU_SCRP_WN32 : timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' Message no. 37033. Please let me know how to resolve this issue. Thanks a lot for

  • How to change the datasource from one server to another server?

    i need to change the datasource from development environment to production server. i had configured the JNDI informations like the following in the 'context.xml': <Context path="/RFT" docBase="RFT" reloadable="true"> <Resource auth="Container" type="

  • GL account created in wrong account group

    Hello  I have a GL account created in wrong account group? Some transactions have been posted to this GL account already. How can I reconcile the transaction if I want to create it in the correct account group? Best Regards Prabin

  • Windows Server 2008 R2 updates fail - error code 80071A30

    One of our windows 2008 servers has recently failed to install any updates. I have tried the following solutions but non have worked. 1. Cleaning up the SoftwareDistribution folder. 2. Fixed some errors using WindowsUpdateDiagnostic.diagcab 3. Instal

  • Online search engine code using Spring+JDBCTemplate

    Hi , I have a requirement to create the search engine using Spring and JDBCDao Support. So, any one can help me in coding. hope for help, thanks and regards vasan