Iphone4 wont chrge and red light on

sudenlly my iphone4 is off and wont chrge from wall charge or pc and there is red light on all the time in the front
any help

Reset, hold together both the Home and Power buttons for about 15 seconds, until the iPhone turns on. If this works and everything is OK then great.
But if it does not work ...... the Red Light is a glowing sensor due to increased voltage in the iPhone. Take the iPhone to Apple for Warranty Service.

Similar Messages

Curve wont start and red light flashes

I was on my way home on the train and running low on batteries, but thought i had enough to quickly browse the applications.
I'd installed the free Time app earlier that day and checked it out, and it wasnt really to my taste, so I decided to delete the app. It warned me the blackberry would need to restart which was fine, only it turned off and didnt come back on.
I thought it had just ran out of battery but now after four hours of charging, and plugging it to my PC the blackberry still wont start. My laptop wont even recognise its plugged into anything and every button I press just gets the flashing red light.
Can anyone help? Is there a manual reset button on the device?

Hello,
I had this happen one time to my 8530... and I thought my heart was going to break. I'm an engineer so I have a bad habit of breaking and fixing, as I have learned that it's the best way to become an expert on any given piece of technology...
Anyway, I was able to fix my Berry by attaching it to my Mac, and letting the computer load the OS on it. Make sure it's plugged in with the desktop manager when you boot the phone your desktop manager should prompt you if you want to reload the OS...
Basically that's what the flashing red light means... you corrupted your OS, and now needs a reinstall.
It takes about an hour to do...
Hope this helps!
~Tom
~Tom
Curve 8530

Touch sceen wont work and red light

My touch screen on my HTC Rhyme stopped working and now there is a faint red light in the top left corner of the screen. How can I fix this?

Hi. My name is Stephanie, >Personal info removed< daughter. I have had my phone since July 1, 2012. I have been having consistent issues with it taking FOREVER to turn on or restart. Also, I have at the same issue the starter of this thread. To describe in more detail, I can hit the on/off button to show the home screen. But, the touch screen is not working. And, there is a faint red light about 5mm to the left of the Verizon logo at the top of the front screen. I chose this phone because I wanted a smart phone and this looked like a great option, but I have been having consistent issues and have not dropped the phone or changed anything on the phone. Hoping to get some help, otherwise, I am contemplating paying the cost for the new Samsung note, as much as I DO NOT have the money to do this. Please let me know ASAP as to my options, especially since I don't have any discount or good upgrade options until 04/2013. Thank you so much hope that I can get some resolution to this problem. Also, you can e-mail me directly at >Personal email address removed<
Message was edited by: Verizon Moderator

Desktop Computer dc5750 shuts down and red light flashes on front of computer and won't start at all

I have a DC5750 HP Compaq Computer it is 6 years old, but I have 4GB Ram, Nvidia GS8400 Graphics Card, two one TB Hard Drives. While I tried to re-installed my operating systems it all of a sudden shut down not once but twice, I opened up the side of the computer and found that it was hotter then normal. I let it sit for a while thinking it maybe over heating after hooking it back up I turned it on again nothing happened except a beeping noise and red lights flashing on the front. Can this be fixed as money is an issue.
Thanks
Rob

Hi, Rob:
Please review Appendix A. starting on page 56 of the Troubleshooting Guide at the link below to interpret the beep codes and see the probable causes and recommended troubleshooting steps.
http://h20566.www2.hp.com/portal/site/hpsc/template.BINARYPORTLET/public/kb/docDisplay/resource.proc...

Phone wont turn on and red light flashing 5 times with pause/s in between

i was charging my phone, after 30 minutes i unpluged the plug from the mains and typed in my password. from there on the phone went completely blank and all i was seeing was a red light flashing. I charged the phone for 12 hours and now i cant see the red light anymore. The only time i see the red light flashing is when i use the usb or the phone charger. At the moment the phone is completely blank i cant switch it on. Also ive tried using the usb which didnt help my laptop doesnt recognise it neither does the desktop manager.
Message Edited by SgtAssassin on 10-11-2009 05:22 AM

Hi and Welcome to the Community!
Without the use of the charging port, tests will be more difficult, and results less definitive. Nevertheless...this sequence is needed:
Obtain an known good and already fully charged additional battery...use it in your BB and see what happens
Obtain access to a known good and identical BB...use your battery in it and see what happens
The results of this will indicate if it's your BB or your battery that has the problem. Note please that "known good" and "new" are not necessarily the same thing...while rare, a new battery certainly can be defective. The best (and, btw, least costly) method to conduct this test is to find someone with an identical BB who has no issues...trade batteries and see what happens.
If the result is that your BB is the issue, then you will need to seek out a local (to you) shop with a qualified BB hardware technician to give you a proper evaluation and estimate. If you remain in warranty, you could instead seek support under those terms (assuming your warranty is not void).
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Unreliable sound - speaker symbol greyed out and red light in 3.5mm jack

Had my MacBook for 3 years with no problems. But over the past few months, the sound has been very unreliable. It always works when external speakers are plugged in, but when using the internal speakers it's very temperamental. It will just suddenly grey out the speaker symbol on the menu bar at the top, and a red light is visible in the 3.5mm jack socket.
Any ideas???

Your Mac believes that a digital audio cable is plugged in. You can use a toothpick or unbent paper clip to toggle the DA switch off. It's located along the side of the port, not at the back whence the light emanates.

No sound and red light

I have no sound and when I turn the volume up there's "a circle with a line through it" there is a red light coming out of the earphone socket. I tried unplugging it and it worked but I want to use my headphones sometimes and when I take them back out it goes back to the red light. I tried changing the settings to internal speakers but when I went to "Choose a device for sound output" there was only "Digital Out". How do I select internal speakers when they're not there, how do I fix this problem?

So my internal speakers stopped working around 9-12 months ago, along with it the all-too-familiar red light in the headphone jack. Tried all the toothpick (actually recommended by an Apple tech), headphone in-and-out, paper-clippy, throw salt over-your-shoulder ideas posted out there; all to no avail. Nothing would get that switch inside to pop back from it's position, and let my computer know that there was nothing plugged into the jack. After all that and NEAR A YEAR of no internal speakers, they inexplicably started working again the other day. I think what happened was that I had neglected to notice that my headphones were plugged in still when I tried to put my laptop in the case, and slightly tweaked the headphone jack port when the headphone jack hit the side of the case. Whatever you do, don't let anyone convince you that it's a logic board or I/O board failure. It seems very likely an obnoxious flaw in the jack's design, and I'm not surprised many people can get it working again by poking around and getting the switch inside the jack to return to its position.
This computer has been a workhorse for me and OSX is a great design, but If I were to issue one complaint about Apple it would be to stand behind thier hardware better (I've had other problems before too). I feel like they could have issued a proper procedure to fix this problem so that everyone with issues like this doesn't have pull thier hair out searching forums for solutions and getting unnecessary expensive repairs.

TS1574 no audio from built-in speakers and red light visible through the headphone port

My 15" late 2006 MBP has just stopped producing sound from the internal speakers and for the first time there is a red light visible inside the headpbone output port. Apple support says contact support but since I'm a long time out of even my extended warranty I wondered if anyone had a fix-it suggestion I might try myself?

Try to plug the headphone into and out of the headphone socket couple of times
to flip the microswitch in the socket.
Red light visible means sound output is stuck in digital mode.
Reset PRAM. http://support.apple.com/kb/PH4405
Procedure is same for 10.6
Reset SMC.http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
If these steps do not help, repair Apple Store is needed.

Z10 doesn't restart and red light blinking only.

Hi,
My z10 phone was normally working, and sometimes it's don't response and hang. last time i tried to restart and it's took long time and i used blackberry link and did software update. in between software update was completed but it was not run. i got problem. Red light blinking.
even i charge it or restart, Red light blinking.
after i face this problem, i tried to slove by autoloader, new BB link and many more action done. Nothing work.
it might be mother board problem???? but i am not technician.
We cann't buy easily motherboard also.
I think Blackberry is totally **bleep**.... Since i have used blackberry storm , storm 9860 and z10 al are **bleep**.

I think BlackBerry is totally awesome...Since I have used BlackBerry Pearl, Curve, Bold, Z10, Q10, and now Z30. All are awesome.
There are so many things that could cause your Z10 to fail. You could have gotten it wet, dropped it, stepped on it, or any other manner of abuse. It could also have just failed on it's own through no fault of your own. Since I know MANY people with BB10 devices right now, including 3 in my own household and another 3 assigned to some coworkers there is no problem with all BlackBerrys.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

I have HP Compaq dc7600 , beep codes and red light !

I have HP Compaq dc7600 and when i push the start button , i get Beep 4 times than again 4 times , than again than again , 4 beeps , 5 times = 20 beeps , and the red light with the beeps , the fan of powersupply and the other fans at the begining start then after 1 second it will stop , what should i do !

Hi:
Please see the troubleshooting guide at the link below.
http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c00368814/c00368814.pdf
There is a section that explains the beep codes and the suggested course of action to repair.

Torch Help! Screen not turing on but buttons and red light is flashing

Hi,
My torch has had the problem of screen functioning, it is just a black screen but buttons light up and led flashes red.
Thanks

I have tried this, blackberry works find but nothing id displayed on screen, just blackness. red light blinks and buttons are lighted up a if it is on.

NEW HARD DRIVE - FANS RUNNING LOUD AND RED LIGHT

I've just installed another hard drive in the lower bay of my G5 1.8. I took one drive out and inserted the new one, leaving the original hard disk with the operating system on where it was.
As soon as I pressed the "on" button the machine powered up but with the fans on very loud and a red light on inside the machine.
The G5 starts up fine. The new hard drive is recognised.
Any ideas what's gone wrong as it wasn't behaving like this before?
Thanks in anticipation

Hi gravenors, and a Warm Welcome to Apple Discussions and the Power Mac G5 Forum!
You could try checking that the clear plastic air deflector has been replaced correctly.
If it seems to be in place, but the fan and red LED are still on, please post again - as there are further things to try.

Black screen and red light

not really sure what happened , when i checked a email the phone went back and the red charge light goes on and off. I have another torch that i can use , proplem is how do i get the information from this phone using the desk top software it will not link to the phone. If some one can help me get this one going or help me get the info from this one.

Hi and Welcome to the Community!
Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain connected to a known-good wall charger (not PC USB):
With the battery inside, connect your BB to the wall charger
Leave it alone for 2 hours, no matter what the LED or the display does
Remove the battery
Wait 15 minutes
Insert the battery
Wait another 2 hours, no matter what the LED or the display does
This has been known to "kick start" some BBs.
It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
Obtain a known good and already fully charged additional battery...use it in your BB and see what happens
Obtain access to a known good and identical BB...use your battery in it and see what happens
The results of this will indicate if it's your BB or your battery that has the problem.
Like insurance, backups are neither a reactive nor optional activity...if you cannot get your BB running again, you cannot take a backup from it now. Only by performing regular proactive backup processes can one be protected from this type of situation.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Hot phone and red light stays on

My iphone 3G often gets hot when I use it for 15 or 20 minutes and the little red infared light stays on and I don't know why. Any helpful ideas or advice would be welcome.
M

Hi and Welcome to the Community!
I fear that all you have done, contrary to the recommended process, has permanently damaged your BB. But, you nevertheless might want to try again the "rice trick", but this time not being as anxious about ceasing the process. If you wish to attempt that, then:
REMOVE YOUR BB BATTERY NOW!!!
Run, don't walk, to this FAQ:
http://www.blackberryfaq.com/index.php/Got_Your_BlackBerry_Wet%3F
Do everything it says, including waiting the maximum recommended time. Applying power to your BB between it getting wet and doing this process reduces the chances of success. Further, the only thing predictable about moisture intrusion into a BB (indeed, any electronic device) is that the results will be unpredictable. I've seen some come back up right away and be fine. I've seen others never work at all. I've seen still others run for a bit, and then die later. And every thing in between.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Z2 wont turn on red light

my xperia z2 abruptly turned off while there was 10% battery was remaning since then i tried every thing pressed all three buttons together power volume and tried that red button on the side of sim tray nothing is working out this is very worrying moment for me plz some help

You may need to perform a software repair using PC companion.The process will erase all internal memory.You might need to charge your device for about 1-2 hours before so the device has at least 60% battery.
Make sure the device is not connected to computer or laptop and turned off (sometimes you have to press power button and volume up until the device vibrates 3 times or on some devices you have to press the small button near the SIM tray or on the back of the device).
Open PC companion->support zone->phone/tablet software update->repair my phone/tablet blue highlighted.Follow the steps given,do not connect your phone until prompted to press volume down while plugging USB cable. If PC companion does not start the repair process, you might need to run it in compatibility mode with Windows 7 (in some cases XP).
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

Iphone4 wont chrge and red light on

Similar Messages

Maybe you are looking for