Iphone4line operator missing

Hi,
I've put a new Sim card in my old Iphone 4, but impossible to get the line "operator" on the menu

Thanks for the reply, but I wasn't looking for a workaround.
I was just wondering If I had missed something, I guess not.
Still puzzled as to why this is.
And not pleased I have to tell my users to use between.....

Similar Messages

Bootcamp system operating missing error after resizing partition

I resized my partition to increase my bootcamp drive few months ago on Disk Utility on Mac and after that I decieded to have more space on Bootcamp partition so I resized it again by set new size for Macintash HD but when I reboot my Mac and hold alt key there was no Windows option so I googled and followed this discussion: https://discussions.apple.com/thread/4144252 based on this answer: https://discussions.apple.com/thread/4144252#19071422, after I rebooted my Mac I saw Windows option but after select windows I get System Operating Missing.
here is current situation of my partions and disk:
gpt show: disk0: mediasize=500107862016; sectorsize=512; blocks=976773168
gpt show: disk0: Suspicious MBR at sector 0
gpt show: disk0: Pri GPT at sector 1
gpt show: disk0: Sec GPT at sector 976773167
      start       size index contents
          0          1         MBR
          1          1         Pri GPT header
          2         32         Pri GPT table
         34          6
         40     409600      1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
     409640 850647624      2 GPT part - 48465300-0000-11AA-AA11-00306543ECAC
851057264    1269536      3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
852326800   84899440
937226240   39546880      4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
976773120         15
976773135         32         Sec GPT table
976773167          1         Sec GPT header

ehsan84 wrote:
I resized my partition to increase my bootcamp drive few months ago on Disk Utility on Mac and after that I decieded to have more space on Bootcamp partition so I resized it again by set new size for Macintash HD but when I reboot my Mac and hold alt key there was no Windows option so I googled and followed this discussion:
You have broken your installation by resizing incorrectly.
Erase your hard drive and reinstall OSX, then reinstall Boot Camp. Do not attempt to resize again unless you are prepared to use the correct tool. (Paragon Camp Tune is the only option other than the delete and reinstall method)

Opera misses one option bar.

Since yesterday opera misses the top bar with the menu's(how is that called). The one where it says "File" and "Extra". I have opera installed from the extra repo, but opera-dev from aur has the same problem. I tried removing .opera/ but that doesn't help. Anyone the same problem?

i feel stupid, i pressed F11 a million time.
/me is stupid

ORA 920 Relational operator missing

We are in a process of moving data from .txt file to staging table. Earlier we have conducted the same run many times and it was proper and successful. Today we tried the same but it ended in an error saying ORA-920.Relational operator missing.
We checked the colums there was no change in the mapping . It was as it as it was for previous runs.
Could u pls help me out of this.It would be really appreciable.
Aniruddha

Hi,
Could you copy the command from Operator here, please?
Cezar Santos
http://odiexperts.com

Incomplete request/response operation missing send

Brief on orchestration whihc have request response port(published as WCF service)
1. receive(initialize co-relation)
2. Looping and do some operation(in scope and exception handling)
3.listen with receive(follow co-relation )& dynamic set delay shape(this step is also in loop, delay continues untill second request is received)
4. construct resp message and send
getting build error incomplete request/response operation missing send

You have a loop shape, and obviously an condition associated to that loop.
Now consider a scenario: you receive a message - and your loop condition is not met. In such cases you are coming out of loop (after receiving a message), and you will not be able to send anything back on the Req/Res port. Hence the Compiler restricts you
this way.
Thanks
Abhishek

Enterprise Service Operation missing in VC 7.01

Hi all,
I have created a Enterprise service with two operations. When I test the enterprise service in the SOA Manager I see both operations in the webservice. When I use the same WSDL file in a systeem in VC I just get one operation.
Can someone tell me what the problem is?
Kind Regards,
Richard

Hi Radi
Thanks for your post.
Type "run programs made for previous versions of windows" in start menu search, if it gives any result as "Run programs made for previous versions of Windows" then you are able to run that application in compatibility mode through that.
Hope this helps you. If the problem continues please mention for which file types you are trying.
Thanks and Regards
Ananda.D

Never Consolidate operator (^) Missing in BSO app

Hi Guys,
I've got a BSO application with a measures dimension and I'm trying to set a % measure to never consolidate (^), however, I can only see (+,-,*,/,%,~). What is the prerequisites for using (^)? why cant i see the ^ operator?
Thanks,

TimG this remided me the discussion that we had on ASO never consolidate. So I went and looked at an ASO outline and it is there in the dropdown, however it is not in BSO. (Maybe it got switched )
Regards
Celvin
http://www.orahyplabs.com

Document operations missing when using my palette

Hi,
after a lot of trial and error I have finaly managed to get a custom palette running in my Photoshop CS6. The problem I have now is that when my palette is active I am missing some functions from the Photoshop File-menu, i.e 'New', 'Open', 'Browse'. Is this to be expected?
My palette code is based on this: http://www.davidebarranca.com/2012/10/scriptui-window-in-photoshop-palette-vs-dialog/, the 'PS palette working example' section
main();
function main()
          mainWindow = createGui();
          isDone = false;
          mainWindow.onClose = function()
                    return isDone = true
          mainWindow.show();
          while (isDone == false)
                    app.refresh();
function createGui()
          window = new Window("palette", "Material Picker");
          window.center();
          return window
Could it be that this code is preventing Photoshop from running all functions?
I would really like to have this running in a dockable panel in PS but I havn't found a way yet. Any suggestions are very welcome.
Thanks,
Johan

I see. So when you scan, copy, or fax through the ADF, it acts like everything is working fine, but nothing copies, nothing scans, and nothing faxes. When you use the glass, scan, copy, and fax work fine. The c6180 has two seperate scanner lamps, one for the ADF, and the other for the glass. It sounds like the ADF lamp has gone out. There are a few things you can try to get it working again outlined here, but most likely if it's gone, it's gone. The scanner lamps aren't something that you can replace seperately from the printer. To replace the scanner lamp you gotta get a whole new printer. If you can make due, then I would hold off, but if you gotta have it and the document doesn't fix it, you gotta get a new one. The down side to getting a new one, for you at least, is that the PhotoSmart printers don't have traditional faxing anymore. To get taditional faxing you have to get an OfficeJet or a LaserJet. The OfficeJets will use way less ink than the PhotoSmarts, but the photo printing quality isn't quite as good, and the scanning options tend to be more limited. The LaserJets are the most stable printers made. They are efficent and will last almost forever, because there isn't alot that moves so there isn't alot that can break. The downside to LaserJets is that they can be a larger initial investment, more so if you want color printing, but they do pay for themselves in the long run.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Missing Handling Unit

Hi All,
I have a delivery with 3 line items.
One of the operators forgot to create a handling unit for item 20.
Is there a tcode I can use to create a handling unit and assign that handling unit to my delivery?
Please help.
Meghna

What T code you are using to create HU (Which u mentioned yours operator missed)
You can create HU and then in VL02N assign the HU number in packing button.
Or
You can create directly from VL02N through the packing button
Regards,
Vishal

Operation confirmation without inspection results - not working

Hi All,
We have 4 operations for one production order.
1st operation has 5 MICs
2nd operation - no MICs
3rd operation - no MICs
4th operation - 1 MIC.
In tcode OPK4 I have configured error message if QM results are not recorded.
Before result recording I tried to do 1st operation confirmation (tcode CO11n). I got error QM data for operation missing (as expected).
Now for the first operation (having 5 MICs), I have recorded values for only 1 MIC (out of 5). Then it is not giving error for 1st operation confirmation.
Our requirement is- all 5 MICs must be recorded for operation confirmation.
How to handle this. Please Help.
Thanks & regards

The configuration setting you have made doesn't give error message during confirmation even when one of the MIC assigned to one Operation is recorded and remaining MIC's assigned are not recorded.
Hence we can use User Exit during Confirmation screen and do the necessary coding to throw a error message if RR is not done.
Best Regards,
K. Raghavendra Nayak

Problem in SQL query in MDB database

Hello all,
I am using mdb database and want to read specific time stamp record based on time stamp. I am using simple sql query but I am getting one error. Please let me know where I am making mistake(s). One error is operator missing. VI and database is attached.
My query is -SELECT * FROM Downloaded_120 where col2 between 13:00:00 04-06-2013 and 14:00:00 04-06-2013
Thanks.
Kudos are always welcome if you got solution to some extent.
I need my difficulties because they are necessary to enjoy my success.
--Ranjeet
Attachments:
VI and database.zip ‏372 KB

http://digital.ni.com/public.nsf/allkb/4012B21BA0876907862576110070FC0A
You're missing the #s, too.
Jim
You're entirely bonkers. But I'll tell you a secret. All the best people are. ~ Alice

CASE WHEN syntax error - Dreamweaver MX

Hi Gurus,
I am trying to use the statement in the Recordset creator tool Advanced Mode:
select PayDay,
case when getdate() > PayDay
then 'Out of Time'
Else 'On Time'
End
From tPayment
But I get the error:
Microsoft OLE DB Provider for ODBC Drivers erro '80040e14'
[Microsoft][Driver ODBC Microsoft Access] Syntax error (Operator missing).
Anyone help me, please!
Thanks is advance.

Hi bregent,
Thank you very much for your response.
1) Tell us which verison of Access you are using
- I am using Access 2007
2) Use the app dev forum for these questions
- I couldn't find this forum here
3) I didn't think Access supported CASE statements outside of VBA.
- If there insn't, could be any other workable instead this one
4) I've never seen CASE/WHEN. Can you refer me to documentation that supports this syntax?
- I use case/when on MSSQL, I need one that works with Dreamweaver in the recorset creator. What can I use to know if:
Today is greater than PayDay in the tPayment table then It is must tell me that it is Out of Time (case when getdate() > PayDay then 'Out of Time')
If the PayDay in the tPayment table is greater than today then it must tell me that it is is On Time (Else'On Time' End).
That is what I am looking for.
Thanks a lot!

Pb Trigger with :new

Hello
When I use this Trigger:
CREATE OR REPLACE TRIGGER TMM_EXPLOSE_T
AFTER INSERT ON TMM_EXPLOSE
REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW
DECLARE TTCNT INTEGER;
BEGIN
TTCNT:=0;
IF (:NEW.TMM_TYPE != 'SNBOM') THEN
TMM_EXPLOSE_P(:NEW.TMM_TYPE,:NEW.USERNAME,:NEW.CAL,:NEW.POS,:NEW.DDATE,:NEW.LIV,:NEW.SLIV,:NEW.MQTY,:NEW.PARENT,:NEW.CHILD,'',TTCNT);
ELSE
TMM_EXPLOSE_SN(:NEW.TMM_TYPE,:NEW.USERNAME,:NEW.CAL,:NEW.POS,:NEW.DDATE,:NEW.LIV,:NEW.SLIV,:NEW.MQTY,:NEW.PARENT,:NEW.CHILD,'');
END IF;
END;
I receive this error:
PLS-00553: character set name is not recognized
I think is for the :NEW
Could you explain me how i can do it work please
I use Orcale 9.2.0.1.0 on Unix server with
NLS_CHARACTERSET     WE8ISO8859P15
NLS_NCHAR_CHARACTERSET     AL16UTF16
NLS_LANGUAGE     AMERICAN
Thank you
Pierre Diaz

hi:
what version of Project Raptor are you using?
I created a tmm_explose table with just a column tmm_type;
I open a sql worksheet on Raptor 08.04 on linux, and when I run
CREATE OR REPLACE TRIGGER TMM_EXPLOSE_T
AFTER INSERT ON TMM_EXPLOSE
REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW
DECLARE TTCNT INTEGER;
BEGIN
TTCNT:=0;
IF (:NEW.TMM_TYPE != 'SNBOM') THEN
-- TMM_EXPLOSE_P(:NEW.TMM_TYPE,:NEW.USERNAME,:NEW.CAL,:NEW.POS,:NEW.DDATE,:NEW.LIV,:NEW.SLIV,:NEW.MQTY,:NEW.PARENT,:NEW.CHILD,'',TTCNT);
null;
ELSE
-- TMM_EXPLOSE_SN(:NEW.TMM_TYPE,:NEW.USERNAME,:NEW.CAL,:NEW.POS,:NEW.DDATE,:NEW.LIV,:NEW.SLIV,:NEW.MQTY,:NEW.PARENT,:NEW.CHILD,'');
null;
END IF;
END;
/the message is a popup window stating: "An error was encountered performing the requested operation: Missing IN or OUT parameter at index:: 1 Vendor code 17041"
The same works when I put :new in quotes:
CREATE OR REPLACE TRIGGER TMM_EXPLOSE_T
AFTER INSERT ON TMM_EXPLOSE
REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW
DECLARE TTCNT INTEGER;
BEGIN
TTCNT:=0;
IF (:"NEW".TMM_TYPE != 'SNBOM') THEN
-- TMM_EXPLOSE_P(:NEW.TMM_TYPE,:NEW.USERNAME,:NEW.CAL,:NEW.POS,:NEW.DDATE,:NEW.LIV,:NEW.SLIV,:NEW.MQTY,:NEW.PARENT,:NEW.CHILD,'',TTCNT);
null;
ELSE
-- TMM_EXPLOSE_SN(:NEW.TMM_TYPE,:NEW.USERNAME,:NEW.CAL,:NEW.POS,:NEW.DDATE,:NEW.LIV,:NEW.SLIV,:NEW.MQTY,:NEW.PARENT,:NEW.CHILD,'');
null;
END IF;
END;
/Please, note that I just commented the tmm_explose_p function (for lazyness... :-))

Why did my iPod touch go into recovery mode when updating to iOS 8.1 over the air???

I was updating my iPod touch (5th Generation) to iOS 8.1 over the air update option and my iPod goes into recovery mode...I hadn't backed it up in like 2 weeks and a lot happened in two weeks with photos and everything. I have yet to see if I get any of them back but why did this happen? I thought apples over the air update was reasonably easy and secure...?

Hey Haywards, There has been reported issues with updating iPods to iOS 8, one of which is updating with the cloud or through Wi-Fi. Your seeing one of the problems. After you get things cleared up with the DFU recovery, connect your iPod with your computer via the cable and run the update through iTunes. You should be OK. Or if still an option, don't do the update at all! Many have reported several issues with iOS 8 on iPods. Slow or laggy operation, missing apps, missing music, camera roll not working or missing and huge battery drain and charging issues, just to mention a few. You may want to hold off from updating if possible. Things to think about. Good luck, Cheers.

Enhancement for me11

Hi,xperts
    I need to do some enhancement on me11/me12 for some specify fields such as inco term and etc...
    I spend whole afternoon to search for some user exit and BADI but seems NONE of them works.
    Is there any body can help me.
    more appreciate...

Hi Etrafanob
    May be this can fit my purpose, If it works in LSMW,thank you for your answer！
     But when i use the field exit I found that I couldn't choose the change mode, It warned that only can be changed in original language 'DE'.
     So I login with the language 'DE',bu also I can't change it.
     Maybe there is some operations missed or wrong in my guide which I found in the internet, I'm not sure.
     would you please give me some guide or demo in hand?
Edited by: june wu on Oct 9, 2008 8:23 AM

Iphone4line operator missing

Similar Messages

Maybe you are looking for