IPhone4S Camera Upside Down after 5.0.1 Update

The 5.0.1 Update was pushed to my iPhone this afternoon.  Naively, I loaded it and rebooted.  Although I appreciate the Camera that made an apprearance on the lock screen, unfortunately, it now displays in reverse orientation.  And, when I take a picture-- it's upside down.  When I turn the camera to shoot, ALL of my pics are upside down.  No matter WHAT direction I hold the camera in--they ALL turn out upside down. This is HORRIBLE.
Can I get the old OS back, is there a fix (BACK to the way it was), or should I just return to the AT&T store?
Thank you.
Lisa

I finally worked around Apple's problem.  I synced my iPhone 4 phone with another computer.  Lost my apps and music on the phone but still had my music database of almost 3,000 tunes.  I then synced with another computer with the updated iTunes software they just sent out.  Then had to rebuild my apps and music on the phone.  I used Tune-Up plug-in to help with the music with covers and dupes, etc.  It took me till 1 am last night but it's now working and syncing ok. I have about 1,000 tunes on the phone now, with no dupes and 95% of the cover artwork. Without Tune-Up it would take me a week to get the dupes out and covers for all the albums. I think the problems started when Apple tried to send the update directly to the iPhone rather than thru iTunes like they had always done before.  I turned off the cloud and am syncing and backing up with my computer and home sharing is turned off. That method worked very well for the last few years.   It seems like the combination of home sharing, the cloud and 5.0.1 software caused a lot of problems.  Hopefully I have it under control now, or at least until the next software update.  It was a major pita.

Similar Messages

  • Picture turns upside down after being taken

    What could cause my phone to turn my pictures upside down after it is taken? As I am taking the photo it is the correct way but when it transfers into my camera it rotates to be upside down.

    That seems to be a bit too fast if it continues to drain that quickly. That would be 20° drain each hour only giving you 5 hours of battery life. Give it some time before you make any real assessment, the battery indicator can act sort of funky at times. My indicator will stay on 100° for 15 minutes and then start to drain rather quickly until it evens out and gets to where it should be. From that point on, it will reduce at a normal rate.
    You can try resetting the iPad. Sometimes that cures hunky little software issues. Sometimes, restarting the iPad can return the gauge to a normal reading.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • My Camera icons are upside down after the update anyone else getting this ??

    MY camera icons are upside down since the update HELP!!!!

    Do one by one and test.
    Restart / Reset
    http://support.apple.com/kb/HT1430

  • Air 3.0 Android Front Cam upside-down

    Dear Adobe Community,
    I am working on an app where I grab the video from an android (2.3.3) device, and stream it to a recording video server. My app is written in AS3 with Flash Pro CS5.5, so I first publish that, then use the adt command line to compile using the Air 3.0rc SDK for a runtime bundled version. The rear camera works perfectly fine, meaning, when I hold the phone in landscape mode, video displayed in the video object is right side up, and when I hold the phone in portrait mode, the video on screen also turns, also right side up. When I switch to the front cam, however, the video displays fine on screen in landscape mode (right side up), but when I hold the phone in portrait mode, the video turns upside down. I tried flipping the video object vertically, which fixes the 'right side up' issue for the front cam in portrait mode, but all other positions turn upside down. Is anyone else experiencing a similar issue? I am using the 3.0 SDK release candidate version to compile.
    p.s. I have auto-rotate turned off, and position in portrait mode when I compile the apk. I tried swiching to landscape mode, but same result.
    Any help or hints are greatly appreciated.
    thank you,
    Alex

    Hi bjsr12345,
    That was quite a long time back. Unfortunately, even today, if your target platform is below ICS (Android 4), that rear camera orientation issue is still present. You can adjust so that you flip the video object within your app if it's upside down (say, when you are recording a video and allowing the user to change between front and rear cams mid-stream), but there is no way to change the orientation of the video itself, sans adding some lines of code in a native Android code itself, not through Air. Hope this helps.
    Alex

  • Firefox Hello with camera upside down (with linux Mint 17)

    Hello, I'm running Firefox 36.0.1 and I tried the new Hello addon. Unfortunately my camera appears upside down. This was the same problem I had using Skype and I had to update libv4l and than worked. Now for Skype it's still working but for Hello the problem is back. (I'm using linux Mint 17)
    Any suggestion?

    Hi,
    I asked in the mozilla irc channel #media and had some help:
    the app_name should just be "firefox"
    /usr/bin/firefox
    However it was noted also that this looks "like a driver/lib issue. So it probably works for any program which accesses the camera (as long as the program hasn’t the libv4l build in)."

  • Lenovo A3000-H camera upside down

    my lenovo tab A3000-H front camera is upside down while using instagram or retrica applications
    any suggestions ?

    Front camera is normal, however an issue occured when using third party camera. (front cam inverted shot and image)
    Try using Camera360:
    Go to Camera360-Settings-Advanced settings-Camera Settings-Preview Direction Revise-Front-Right Direction?-choose correct angle

  • Iphone4 video upside down in FCP

    Does anyone else know how to fix this? I flipped all the video, then rendered but it still plays upside down. Should I export it and then bring it back? if so what settings do you suggest that mimic the video quality?

    I'm having the same problem...
    I import video via image capture or aperture 3. The video plays just fine in quicktime, but when I import to FCP the video is upside down. The only quick solution is to rotate video once it's in the timeline... but sometimes you have to rotate 180 and sometimes 360, doesn't make sense... very annoying. Let me know if you find a fix. thanks.

  • CLJ3600DN Printing upside down after new driver

    So I did what HP said and installed a new driver for my Color LaserJet 3600DN.  Now it prints unside down.  Letterhead must go in upside down now.  Also, when printing on both sides, only prints one way, flip page end to end.  Anyone have any ideas?

    It sounds as though the option for mirroring is on. Check your printer settings and make sure that mirroring is off.
    Hope this helps.
    Syd

  • X1 - Windows 8 - Camera upside down

     Hey guys,
    First time poster. Upgraded from Windows 7 to Windows 8 and now the Webcam is upside down. Ive tried:
    Machine is a Lenovo X1.
    - Reinstalled the driver
    - Loading drivers in XP mode
    - Trying diffrent drivers.
    I just cant seem to get the thing to be the right way up. 
    I see that there are a number of people with this issue and it would be great to get it sorted out. When you narrow your driver search on Lenovo's site down to W8 it doesn't have a driver to be able to download.
    Can anyone help me with this?
    [Moderator edit: veiled profanity]

    I had the same issue with a DELL XPS 12 in "almost tablet mode" which is when you flip the screen but  dont lay it flat on the keyboard (not sure what the mode is called).  Its kind like laptop mode but with the screen facing outwards - perfect for watching movies on a plane.
    to fix it on the xps 12 I went into the mode (tent mode for you) and with it upside down open up the Intel HD Graphics option via the Intel Control Center and rotate the display to 180 degrees - I also saved the settings as a profile called "flipped" instead of "normal".  The Intel smarts seem to hold these settings for the flipped mode but revert back to "normal" settings when I return to normal laptop mode. 
    Only issue is that in flipped mode my hard start button is now at the top of the screen even in tablet mode - not too much of an issue.
    Hope this helps.

  • IMac iSight Camera Upside-Down?

    I just got a new iMac C2D 2.4GHz 24" and when I got to the screen where it asks to take a Snapshot to use as my Account Photo the image appeared upside down. I then figured it might work correctly in Photo Booth but it appears that it does not. When I open Photo Booth it shows my picture upside down.
    I downloaded iGlasses to see if rotating it would fix the problem and it does, but I'd rather not have to set that up and pay 10$ to correct something that shouldn't even be happening.
    Is there anything that I can do? Is there a setting I could change?

    Hi SkawtS
    Sound like the iSight may have been installed upside down at the factory???
    I would take it or send it back for a replacement right away... here's the link to [Contact Apple Support|http://www.apple.com/support/contact>
    Dennis

  • Mac won't shut down after 10.6.8 update - a possible fix

    I noticed that after updating my MacBook Pro to 10.6.8 (using the latest 1.1 combo update) that often times when attempting to shut-down after using Safari the computer would just hang or, I'd get a message that said something like, "OSX didn't log you out because Safari did not quit...".
    After putting the system into SAFE BOOT mode and trying to launch Safari I was getting tons of errors about Flash Player plug-in 10.6 crashing.
    After downloading the latest Flash player plug-in from Adobe the hang-on-shutdown behavior seems to have stopped.
    FYI for those who haven't found a fix.

    Hi, I've just come accross the same problem... did you manage to get a resolution??
    Cheers, Chris.

  • My Mac 10.7.5 won't shut down after new software (security update 2013-003) installation-- hangs at grey screen with "software update" at top.  It also intermittently goes to sleep without my asking.  What to do?

    My Mac 10.7.5 won't shut down after a new software installation (Security Update 2013-003).  It just hangs at a grey screen with "Software Update" at the top.  I have to force quit, then restart-- but the new software hasn't installed.
    My Mac also intermittently goes into Sleep mode, repeatedly, unprompted by me.  I suspect a connection between these two problems.
    I have tried deleting the /Library/Updates folder.  It hasn't helped.  The update still won't install, and my Mac won't shut down without my forcing the quit.
    Help please!

    Hi, I've just come accross the same problem... did you manage to get a resolution??
    Cheers, Chris.

  • Time Capsule  down after 7.4.1 update

    After sucesssfully updating to 7.4.1, Time Capsule goes down after roughly 20 hours.
    The light stay green, airport net is still seen by computers, but you can't join it. You can't connect either through Ethernet. No ping
    No reset possible either !
    Only solution is pluging out the power and rebooting
    My Macpro has a 802.11 n card
    I have also a slimdevice and a wifi canon printer
    All 3 are connected in 802.11b/g , which seems odd to me

    FYI- I figured out how to download old firmware versions. I figured I would post it here in case someone else is having the same problem.
    From the menu bar, while holding the Option key down, select Airport Utility -> Check for Updates… You’ll see a list of all the old and new firmwares which are available. Select the version you want for your Airport (note different Airports have different firmwares.) After downloading 7.3.2 for your Time Capsule/Airport. After the download is complete, select the device you want to upgrade (or in this case, downgrade) and click Base Station, then Upload Firmware. The version(s) that you download should be in the drop down menu.

  • Weird problem: video that flips upside down after editing

    I have just edited a story for an emagazine. The strange thing is after I have gotten all the transitions completed and the whole thing rendered the video will play back and flip the video after the transitions on parts of the story. For example, I have a fade in at the start of the story. The video fades in fine then flips. The video then flips back to the proper angle when my title drops into the package. Then when the title disappears the video flips once again until the first soundbyte. The soundbyte stays the proper angle as well. I'm not sure what the problem is. If you know the solution I would really appreciate the suggestion. Thanks in advance for any and all help, too!

    The original material is video shot on my iPhone 4. I've edited it in Final Cut Pro in the past and had no problem. I'm sure it might be something I missed. But I can't figure out what the setting would be since there is no difference in what I edited shot on the iPhone 4 and what I shot now.
    Thanks again for your help, too!

  • I have Apple O/S 10.6.7 and Firefox 4 and when I play a homemade slideshow/movie from my webgallery it plays correctly the first time, and then play upside down after that, unless I shut down Firefox and then restart it...why?

    I discovered this incompatibility (?) with the help of a Sr. Advisor from Apple. I have uninstalled Firefox and the plist and reinstalled it and the same thing happened. Is there something that I can to do circumvent this problem?

    I discovered this incompatibility (?) with the help of a Sr. Advisor from Apple. I have uninstalled Firefox and the plist and reinstalled it and the same thing happened. Is there something that I can to do circumvent this problem?

Maybe you are looking for

  • Do I need to install CS3 on Windows 7 64 bit before installing CS5 Upgrade?

    I am replacing a graphic designer's Windows Vista laptop with a Dell Precision T5500 desktop.  Do I need to uninstall CS3 from the laptop and decommission the serial number?  Then do I need to install CS3 on the new desktop before installing the CS5

  • Process.waitFor doesn't waitFor process to terminated

    I have searched this website and found may people have this problem, but no one has answer the question. Does that mean there is no way around this? This is from the API: The Runtime.exec methods may not work well for special processes on certain nat

  • How to write a Globla Routine for Transfer Rules

    Hi Experts, How to write a Global Routine for Tranfer Rules ? Where all the infoobjects need to be grouped? Effect need to be shown on group of fields that are available in a single structure. Thanks in Advance Vara

  • Why a public class name and file name same?

    All of us know that, a public class should be declared in a file which has the same name of that class. What is the underlying concept behind this..Can someone give a clear explanation? Thanx.. Sandeep Joseph Paragon Solutions [email protected]

  • Loading drivers in java

    hai I have a doubt about the location from where certain drivers are loaded in java. for example "sun.jdbc.odbc.JdbcOdbcDriver " in the case of loading database driver and com.sun .image.codec.jpeg.JPEGCodec in the case of jpeg encoding I can't find