IPhone4S display unknown symbol when use USSD

please when i used iPhone4S display unknown symbol when use USSD ???
NOT : i dont know why cose as same time i have iphone 4 and used same carrier but its WORK FINE AND show ussd

iPhones no officially support USSD but I can sure it is support USSD because my friend's iPhone is work with USSD.
I and my friend using same carrier same iPhone4S same codes,no JB but my friend's iPhone is work with USSD,only my iPhone cannot work with USSD.
Thank for all answer,no need answer for me already because I just now send to apple store,they check is phone problem,so now claim warranty,need to wait 2 week to get back new iPhone =.="

Similar Messages

Putting iMac display to sleep, when using TV as a screen.

I have just connected my iMac to my 42" Panasonic 1080p TV, the connection was easy and is working fine. My questions relates to putting the iMac display to sleep when using the TV as a monitor, if I am watching You Tube, Sky Player or a DVD, I intend to use my TV as the monitor. Is it possible for the iMac to puts its display to sleep, whilst leaving the TV on. I played around with this today, however was unable to manage this.
Regards Craig

Hi Craig
There is no way to independently sleep either the iMac's Display or an attached Display/TV. However if in the Display Arrangement Preferences you set the attached Display or TV to be the Main Display and turn Mirroring Off, then FrontRow and the Full Screen Mode app's like, DVD player, QuickTimePlayer, etc. will black out the unused iMac display.
Dennis

TS1702 unknown error when using the app store

unknown error when using the app store

Im sorry I will try to be more clear.. and I appreciate all of ur input. Wi-fi works fine.. everything opens and functions fine on the I pad. The problem is I will click on app store or the I tunes store...it opens fine and I am able to look at and download apps etc... but after being in the appstore or I tunes store for a couple of minutes I get kicked out to the I pads home screen. Its like pushing the home button but I didn't. It only seems to do this when im in the app store or I tunes store. I have been using the chrome browser and other downloaded apps such as ebay just fine with out this problem occurring. Not sure about safari as I dont use it and use chrome instead. Um I don't think the home button its self is faulty because it works fine and as stated before this only happens when I am in the appstore or I tunes . I've only had this I pad 1 64gb wi-fi for a few days .. I got it off of ebay it was stuck in restore mode getting error code 1611. I was able to successfully Restore it with I tunes and it running ios 5.1. Seams to work great besides the problem being mentioned.

I don't know why my iphone4 usually too hot when use about 15 minutes.

I don't know why my iphone4 usually too hot when use about 15 minutes.
can you get the another.
thank you

You're not addressing Apple here, this is a user to user support forum.
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Has any of this been tried?

IPhone4S no display when use USSD(*100#)

when I use USSD *100# no display easy menu but got 2button at down to choose,when click it got function but same no display menu

iPhones no officially support USSD but I can sure it is support USSD because my friend's iPhone is work with USSD.
I and my friend using same carrier same iPhone4S same codes,no JB but my friend's iPhone is work with USSD,only my iPhone cannot work with USSD.
Thank for all answer,no need answer for me already because I just now send to apple store,they check is phone problem,so now claim warranty,need to wait 2 week to get back new iPhone =.="

XML not displaying in Safari when using a XSL.

Hi, has anyone encountered this issue where Safari, and all Mac browsers for that matter, don't display XML when using an XSL? When I use a XML file with an XSL stylesheet I get a "Document is Empty" error. It displays correctly when a CSS is used and also works just fine on a PC.

My goof. In the Safari preferences area I turned on Developer mode out of curiosity and then by accident turned off pictures. All is well now.

Display "blank-out" when using Maya with a GF 7800?

I have a problem where my LCD display occasionally blinks off for about 5-10 seconds when using Maya with a scene displaying about 100,000 polys. Has anyone else encountered this? This only seems to happen when I am quickly rotating the camera in a grey shaded perspective panel?
My LCD is a Dell 20" LCD (set at 1600x1200) connected to a Geforce 7800 in a Quad G5 with 4.5GB of ram.
I have never seen this issue before in Maya (I have been using Maya for years, on other machines), so I suspect it is hardware or driver related?

OK, have completed several tests. I definately seems that the my Geforce 7800 has problems when running some applications. I wonder if anyone else has encountered this problem?
The easiest way to cause the display to momentarily shut off is to use Maya in the full screen perspective camera window in shaded mode. Proceed to rapidly move a 20,000 poly model (or greater) both zooming and rotating (the polys need to fill the entire screen and shake the mouse).My display (Dell 20" 2001fp) will blink-off for a few seconds. Of course, this in not "normal" work flow, but I have this issue happening when working normally, it can sometimes take time to occur.
I have tried the Geforce 6600 (256mb ver) and this does not occur with that video card. I have tried several mice both wired and wireless, plus changed the Energy Saver options for Processor performance (from comments I read on Macintouch.com). The problem is consistent to my Geforce 7800. This problem will also occur in Photoshop CS, by moving images and resizing, but I found it much harder to induce.

How to keep display as Show when using Hide Show region with pagination?

We are trying to use a 'Hide Show' region with pagination. The problem is that if you 'Show' (ie expand) the region and then hit the link for the next page, the next page displays Hidden (ie collapsed). We want to keep the page display as 'show' when you move to the next set of records.
There is a fix in this forum for this issue in version 2.2 (Application Express) but we are on 2.0.0.00.49 (HTML DB). Does anyone know of a similar fix for HTML DB 2?
Ver 2.2 fix is at:
http://www.oracle.com/technology/products/database/application_express/packaged_apps/packaged_apps.html#STICKY
Thanks.
David.

Thanks for your reply.
Running the application install script via SQL Plus using FLOWS_020000 produces result:
NOT COMPATIBLE (Your export may contain calls not supported by your HTMLDB version.)
The wwv_flow_api package routines that are not available in our version appear to be:
create_or_remove_file
create_install
create_install_script
Is there any way to handle these calls in other ways?
Thanks
David.

Display Item cleared when using 'Enter-Query'

Hi all,
i am going to develop a multilanguage application with very
special heading texts using display items for these headings.
BUT- if I press EnterQuery, they are cleared also.
How can I restrict cleanup of these display items used as
headings ?
I was looking in the properties, but no idea.
Thanks for help,
udo

I'm showing how to do it when switching modes. I'm
not suggesting this is the best way to do a query.We need to look at this in the context of the original probelm in the thread linked to above. For most cases the when-timer-expired etc is just a huge detour around using the pre-query trigger but it's an interesting approach to the specific problem in the earlier thread. The OP there wanted to be able to type '>5000' into a number field in a non-database block, which we can do in a database block in enter-query mode, and use it as a query parameter in the database block. Perhaps if we enter this into a character field in the non-database block and populate the numeric field in the database block whilst in enter-query mode then we can do searches on ranges of data? Unfortunately it doesn't work - you get an ora-06502 error just like you do when using the pre-query trigger. For the situation in the original thread you would have to use a 'default where'.

Unknown error when using daq express vi's

Hi there i get unknown error when trying to use DAQ express VI's. I have downloaded and installed NI device drivers which was required to generate EXE since then this problem was occuring what should i do i have done all that was mentioned in the following thread
(http://forums.ni.com/ni/board/message?board.id=170&message.id=336246&query.id=2154746#M336246) but no use i am not able to figure out the problem can anyone help me.
Solved!
Go to Solution.

Hi
Ok, if that is the situation and you've tried everything in the other thread. In the solution of this thread there's a zipfile posted that contains instructions and an application that can help you uninstall all NI software on a computer and start freesh.
Best Regards
David
Message Edited by Davidek on 10-01-2009 01:56 AM
Message Edited by Davidek on 10-01-2009 01:59 AM

MBP with retina display always crash when using Final cut pro x and iMovie. Plz l need help

HI, My MBP with retina display always crash when l am using Final cut pro x and iMovie and come up with gray screen. Plz l need help

Take it back and get a refund. What are you waiting for, your new Mac does not work correctly.

I have just started using the new premiere CC. Gives unknown error when using CBR

I tried using the same export setting for mpeg2 that I used in CS6, but CC will say Unknown error when I try to export. It will only work with Vpass 1 or 2. Any ideas why?

Hi MEW1,
Is the printer connected wirelessly or wired?
Go to Preferences and under categories go to > Convert to Pdf then select the Image Capture and then hit ok button.
Close Acrobat and then relaunch it and see if it helps you while you do scanning.
Regards,
Rave

Display Login failure when using External Custom Login Form

I am new to OAM area and really apreciate if some one can guide me in the right direction. I have configured External Custom Login Form (thanks to fusionsecurity blog) with Oracle Access Manager 11g + webgate 10g. If I enter correct user id and password in the below form, then all is good and able to access the protected resoruce.
If I enter incorrect values for loginname/password fields, then the from simply refreshes itself and does not give me any error message. How can display error message when a user enters in correct values for those fields?
<form action="http://hostname:7777/oam/server/auth_cred_submit" method="post">
<fieldset>
<legend>Login Screen</legend>
<label for="username" accesskey="u">User Name:</label>
<input type="text" id="username" name="username" size="15" tabindex="1">
<label for="password" accesskey="p">Password:</label>
<input type="password" id="password" name="password" size="15" tabindex="2">
<input type="hidden" name="login-form-type" value="pwd">
<input class="submit" type="submit" value="Login" tabindex="3">
</fieldset>
</form>
Thanks

Hi!
I have installed Oracle Access Manager 11g + Webgate 11g and not 10g, but I think
it has to work beause login is being processed by OAM (/oam/server/auth_cred_submit);
and it if does not work, it may give you a clue on how to do it.
Having stated that fact, it is very simple to do it: whenever I try to access a protected
resource and I am not authenticated I am redirected to my login page and some
special parameters are passed to it such as: request_id, OAM_REQ, authn_try_count and
some others.
authn_try_count is the magic one as it show the number of login tries, so here is
a code snippet of my login page which uses JSTL for conditional processing.
<form...>
<c:if test="*${param['authn_try_count'] > 0}*">
<span class="error-msg">
<fmt:message key="login.val.wrong.login"/>
</span>
</c:if>
</form>
Best regards,
Jesús García from
Mexico city

The page at docviewer at my company's website displays this error when using FireFox but not hwne using I.E. "ERROR: JAS MiscUtils AX Control not installed!"

When using Fire Fox to view documents at my company's website, the following message occurs:
"ERROR: JAS MiscUtils AX Control not installed!"
This error does not occur when I use I.E.

That error message probably refers to a missing ActiveX control, which is why it doesn't work in Firefox but does in Internet Explorer.
https://support.mozilla.com/en-US/kb/ActiveX

How to display a User defined symbol when using addLinearFeature

Hi ,
We are displaying our DataBase spatial data in the form of image on to the browser .
With the help of MapViewer mv.addLinearFeature i am able to draw lines on to it .
I have created styles in MapBuilder for our userdefined symbols and added to Mapviewerconfig file .
Now as per our requirement we need to put our user defined symbols in the middle of the line when a line is drawn using addLinearFeature
For example Like This :
Assume that (::) this is our symbol .
Please tell me how to do this .

You could use the marker (user defined symbol) as a label for the line. Something like the highways theme/style definition in the mvdemo example where the highway shield is a marker.
SQL> select styling_rules from user_sdo_themes where name='THEME_DEMO_HIGHWAYS';
STYLING_RULES
<?xml version="1.0" standalone="yes"?>
<styling_rules >
<rule >
<features style="L.PH"> </features>
<label column="ROUTEN" style="M.SHIELD1"> 1 </label>
</rule>
</styling_rules>
SQL> select definition from user_sdo_styles where name='M.SHIELD1';
DEFINITION
<?xml version="1.0" standalone="yes"?>
<svg width="1in" height="1in">
<desc></desc>
<g class="marker" style="width:20;height:18;font-family:sansserif;font-size:9pt
;fill:#ffffff;text-style:[t.shield1]">
<image x="0" y="0" width="9999" height="9999" type="gif" href="dummy.gif"/></g>
</svg>
SQL>
The content of ROUTEN (column/attribute) is displayed in the marker (m.shield1).
Will something similar work or is your requirement different?
If its to simply display a marker (i.e. your user defined symbol which is in the database user_sdo_styles view) somewhere along the line then use a line style definition like (see Appendix A of the user guide):
<?xml version="1.0" standalone="yes"?>
<svg width="1in" height="1in">
<g class="line" style="fill:#33a9ff;stroke-width:4;
marker-name:M.IMAGE105_BW;marker-position:0.15;marker-size=8">
<line class="parallel" style="fill:red;stroke-width:1.0"/>
</g>
</svg>
This will display the marker M.IMAGE105_BW at about 0.15th of the line length.
If you want that marker repeated at fixed intervals (0.15 of line length in the following) then use
<?xml version="1.0" standalone="yes"?>
<svg width="1in" height="1in">
<g class="line" style="fill:#33a9ff;stroke-width:4;
marker-name:M.IMAGE105_BW;marker-position:0.15;marker-size=8;multiple-marker=true">
<line class="parallel" style="fill:red;stroke-width:1.0"/>
</g>
</svg>

IPhone4S display unknown symbol when use USSD

Similar Messages

Maybe you are looking for