Iphone4S doesn't connect to airport extreme

My newly purchase Airport Extreme wireless base does not connect to my iphone 4s. It does connect to my macbook air. What am I doing wrong????

Nothing wrong with your AirPort Extreme if other devices can connect.
Try the iOS Troubleshooting Guide:
http://support.apple.com/kb/TS1398?viewlocale=en_US&locale=en_US
If still no luck, post over in the iPhone Support Community for more help.
Using iPhone

Similar Messages

Windows Vista Home Premium Computer Doesn't Connect to Airport Extreme's Hard Drive

I have a hard drive connected to an Airport Extreme. The hard drive is recognized by the Windows computer; that is a dialog box appears that states 'The Airport Disk became available'. But when I attempt to supply a password it tells me "Could not connect to the disk. Make sure netBIOS is enabled and try again (53)."
The hard drive connected to the Airport Extreme is 500Gb and formatted as FAT32. The hard drive has its own power source. There are no spaces in the hard drive's name or in the Airpot Extreme's name. I've assigned WORKGROUP as the workgroup on both the Airport Extreme and the Windows Vista comptuer. I've enabled netBIOS for the TCP/IPv4 connection.
The vista computer is connected to the Airport Extreme via an ethernet cable; the cable is connected to a LAN slot of the Airport Extreme.
All help is appreciated.

Sounds like you are on the right track but I will have to say that I am very sorry but I am out of ideas - you are getting way out of my experience level - and I have to apologize about my previous post - I spelled Tesserax name wrong - you need help from one of the high level participants - I answered your orignal post because I have had sharing issues with Vista and thought that I could help - having said all that, I just thought of a last resort suggestion - make sure that your hard drive works when connected directly to your computer and then reset your Extreme and start from scratch - if that doesn't work then you might just have an incompatible setup - also if you wait a while and reword your question with your new findings, maybe a more experienced participant will respond - good luck.

Why? xbox live doesn't connect to Airport Extreme wireless network

Xbox live wireless adapter is not connecting to my wireless network. xBox live support said to change to WEP security (does not support WPA security). Tried this but it doesn't work either. I can't find any information on Apple support or xBox live support that confirms whether or not the router is even compatible with xbox live. Does anyone know or have experience with this?

Go to your computer and run the Airport Utility. Click on the Manual Setup button. In the tabs you'll see Summary, Base Station, Wireless, etc. Select Wireless. Look about 1/2 way down and you'll see Wireless Security. Click on the popup button and select None. At the bottom of the window click on Update. You'll go offline momentarily as the base station is updated. Now go back to your XBox and connect. Now download all the updates you can.
Once this is finished, go back to the base station and repeat the steps except set the security to WPA and see if your XBox will connect. If not, set the airport for WEP and see if that works.

Time Machine clueless about external HD connected to Airport Extreme

This is not my first post about HD connected to Airport Extreme. Just came back from Apple store. Spoke to Geniuses there in tech support desk and they are clueless.
Here is situation: have 7 Macs in the house connected to Airport Extreme wirelessly. In that respect things are working fine. Last week I purchased brand new WD My Book external HD and connected it to Airport Extreme using USB (it also has Fire Wire but that is not a point here).
As per forum advices I re-formated drive using disk utility to Mac Extended journaled, GUID. here is result:
iMAC x 3, with Tiger - see, mount and use My Book easily, shows on desktop as mounted drive
MacBook Pro w. Tiger - same as above, back up every day to My Book
MacBook with Leopard x 2 - no My Book on desktop, Time Machine doesn't see it
Mac Mini with Leopard - same as above, no trace of My Book, Time Machine doesn't see it
* This problem evolved from me having regular 160 GB FAT32 HD connected to Airport Extreme. Again Tiger machines were using that drive every day no sweat.
* Then I decided to upgrade all Macs to Leopard for one single reason only - Time Machine. (Good that I didn't do it but rather decided to introduce new, bigger and better USB drive first).
* Western Digital My Book is being sold in Apple stores as "drive that is recognized by Time Machine" so I bought 1TB unit.
* All Macs and Airport Extreme are up to date.
Any suggestions? Thank you in advance,
Zack

I cannot tell you why your Apple Genius told you what he did, but he/she was dead wrong. Apple sells its Time Capsule product, so they are not interested in making the AEBS a product competitor.
I will give you a little secret for which you will forever be indebted to me.
Open your Terminal application in the Utilities folder and at the prompt enter or paste the following command pressing RETURN after:
defaults write com.apple.systempreferences TMShowUnsupportedNetworkVolumes 1
Miraculously your problem will be Solved.

TM not showing the drive connected to Airport Extreme....

Hi
I've been backing up to a USB drive connected to Airport Extreme since I installed Leopard with no problem.. Since 10.5.6 it stopped working. I ended up erasing the drive, reformatting it, reseting the Airport Extreme, repair permissions, used Onyx and Applejack and still this is what I'm getting:
When I go select the drive from the TM prefs. it doesn’t show. If I connect it to the laptop first. accept the TM offer to use it as its HD and connect it back to the Airport. I can mount the drive but when trying to start a manual back up. TM gives me the msg. “The back up volume is not in Mac OS Extended (journaled) format which is required”. I formated the drive one more time, just in case and same thing. Last I did a full back up with another drive having it connected directly to the USB port and it worked fine.
I am running all this from my main Admin profile with file vault enable. I have another Admin profile without the file vault enable as an emergency because of a past experience and don’t really use it. and I have the guest acc. enabled.
Does anyone have any ideas??
Thank you.

backups to directly attached drives work differently (and are stored differently) from network backups. they are not interchangeable. also, while in the past TM backups to air disks worked, they are not officially supported by apple so it's possible that 10.5.6 update broke that functionality. You can try the following terminal command which helps to show unsupported volumes.
defaults write com.apple.systempreferences TMShowUnsupportedNetworkVolumes 1
see if the airdisk shows up as a possible TM disk after that.

Airport Utility 5.6.1 doesn't see my Airport Extreme

I'm good with the Ethernet connection for the internet, but Airport doesn't see my Airport Extreme. It's connected to my IMac 10.6.8. Have tried a reset with ballpoint pen, but nothing happens. This all went crashing down the other evening with I suddenly had lost Internet on my MacBook Pro. This ***** so bad. Would it do me any good to call Apple support?

OS X 10.6.8 is Snow Leopard for which you need AirPort Utility 5.6.1.
There are no special techniques to download it. Just click on the link, then click the blue Download button, which will download and eventually deposit AirPort Utility 5.6.1 in your Downloads folder.
It looks like this:
Double-click it to extract the package installer. It looks like this:
Double-click that to open the installer:
Click Continue and follow the prompts, which will either install it in your Utilities folder or tell you a reason it cannot.
After you perform the "hard reset" and the Extreme's LED is blinking slowly, go to your Wi-Fi menu and see if you find a network called "Apple Network nnnnnn". Select it, then launch AirPort Utility.
The reason that everything is greyed out is that AirPort Utility cannot find any base stations to configure. If after doing all the above it still cannot, perform another "hard reset". If that does not work, perform a "factory defaults reset" as I explained above.
What happened at the Apple Store? Other than having a nice ballpoint pen with an Apple logo on it, they are not going to do anything more than you can do.
If you did not bring it there yet, bring your MacBook Pro along with you so that you can see for yourself how it ought to work.

Apple TV often drops connection with AirPort Extreme and Express stations

Here's my setup:
- Mac Pro in basement office connected to AirPort Extreme (802.11n) station via Ethernet
- AirPort Extreme station running WPA/WPA2 security and 802.11n (b/g compatible)
- AirPort Express station across basement room connected to stereo expressly for AirTunes purposes
- Apple TV and MacBook Pro on house ground floor, both connecting to the network via WiFi
(unless specified, the software and firmware in my devices is all extremely up to date. I write about Apple news for a living so I know when the updates land and install all of them almost immediately)
Here's what's going wrong:
Since I have one of the first gen Apple TVs with a 40GB hard drive but a 100GB iTunes library, I use streaming almost 100% of the time. The Apple TV can usually connect to my iTunes library for streaming via WiFi, but if the AirPort Express (a b/g device, mind you) is active on the network, the Apple TV and even my MacBook Pro get booted off the network usually between 12-24 hours, if not 48. Sometimes WiFi seems to work itself out and I can get the MacBook Pro back online, sometimes it even needs a full restart, as Mac OS X will start giving me nothing but "there was an error trying to join this network" warnings. Just as frustrating though, the Apple TV getting booted off means I need go through the whole tedious process of connecting it to WiFi again (it doesn't remember the password for some stupid reason), and then manually surfing again through the Sources list just to get back to streaming my media.
What the heck is going on? Is it the kind of security I'm running? Should I try WEP or... none at all? I would try "downgrading" the Extreme station's network type to only b/g (excluding n entirely), but I don't see that option in the radio settings anymore; it's all just flavors 802.11n now. When I set up the AirPort Express to connect to the network just for AirTunes streaming to the stereo, I used the setup wizard that the AirPort Utility provides. Should I attach it a different way? Perhaps manually set it to "participate in a WDS network" or "extend a wireless network?"
Any thoughts or similar experiences are very, very appreciated. My wife and I love this setup, but its unreliability is really getting on my nerves. Thanks in advance.
Message was edited by: bedoughty

Firstly, the easiest bit (although I don't believe you need to do this):
I would try "downgrading" the Extreme station's network type to only b/g (excluding n entirely), but I don't see that option in the radio settings anymore
You will get additional settings if you hold down the option key while browsing the radio settings drop down menu.
Moving on: Unfortunately a dropped connections seems to be a problem with umpteen causes and not only is it difficult to troubleshoot with someone in a forum it can also be made even more difficult because many problems are associated with network settings on a router that the person who is trying to help is unfamiliar with.
However you seem to be convinced your problems arise when your express is running which may narrow things down a little if correct, if not it may actually lead us away from the answer to your issue.
Is it the kind of security I'm running? Should I try WEP or... none at all?
I use WPA and have no problems (password = 8 Characters)
Should I attach it a different way? Perhaps manually set it to "participate in a WDS network" or "extend a wireless network?
I have my expresses set to participate in a WDS network, but that's because I use them for other things other than itunes, I would have thought 'join a network' would be fine.
You could check that all your devices are using independent IP addresses and all are using the same subnet. You could also check that no two devices have the same mac address, I've been told a million times this can't happen, but I've seen it. You may be wise to check these things before and after your devices have been 'kicked off the network", you may even want to write them down to see if any are changing.

Unable to connect to Airport Extreme since installing Mountain Lion

Unable to connect to Airport Extreme since installing Mountain Lion. If I go to Finder > Shared I can see it listed but then when I go to connect to it won't. I can see it in Airport Utility and connect to the internet but when I try and connect to the base station to use my hard drive / printer it won't connect?
Tech Support tried saying it could be the devices attached don't have an update for them yet but doesn't explain why I can't connect to the base station. In their defence I can see it in airport utility so the base station does work with the OS X
However I've just tried connecting by an ethernet cable and connects fine?

Ok .
Power down the base station (Mine is connected to a 4 way so i down powered base station, printer and hard drive) powered back up and now when I go to finder then look at the shared section I can view my files on the base station.
Hope this helps

How do I connect my Airport Extreme to my modem (Cisco Model DPC3010)?

I am having trouble connecting my Airport Extreme Wireless Base Station to a Cisco Modem (Model DPC3010). I have used the Airport Extreme for years with other modems with no trouble. Alas, this time around I can't get it to work. I think I might not have the cable connected correctly. Help, please. Thanks

I am having trouble connecting my Airport Extreme Wireless Base Station to a Cisco Modem (Model DPC3010). I have used the Airport Extreme for years with other modems with no trouble. Alas, this time around I can't get it to work. I think I might not have the cable connected correctly. Help, please. Thanks

How do I connect my Airport Extreme 802.11n to Epson 645 Printer?

I can't figure out how to connect my Airport Extreme 802.11n to my Epson 645 Printer. Can anyone help me? Thanks!

You may want to try reinstalling Mavericks. Airport Utility installed by Mavericks may no longer connect to your older AEBS (though I've not heard that.) Installing the Old AirPort Utility (Version 5.6) on Mountain Lion | frank.is.
Reinstall Lion, Mountain Lion, or Mavericks
     Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
     COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
     after the chime press and hold down the OPTION key until the boot manager screen appears.
     Select the Recovery HD and click on the downward pointing arrow button.
     Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu.
     Repair the Hard Drive and Permissions as follows.
After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
     Reinstall Lion/Mountain Lion, Mavericks: Select ReinstallLion/Mountain Lion, Mavericks from
     the Utilities menu, and click on the Continue button.
     Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is
                three times faster than wireless.

How do I connect my airport extreme to windows 8.1

how do I connect my airport extreme to windows 8.1

Connect an Ethernet cable between the U-verse router's LAN port to the WAN (circle-of-dots) port on the AirPort Extreme Base Station (AEBS). Since you will have two routers in series, you will want to reconfigure the AEBS as a bridge. (ref: AirPort Utility > Select the AEBS > Manual Setup > Internet > Internet Connection tab > Connection Sharing = Off (Bridge Mode))

How do I connect my airport extreme to wifi as a repeater

how do I connect my airport extreme to wifi as a repeater?

Thanks for the info.
Unfortunately, Apple has designed their routers to only extend or repeat the wireless signal from other Apple routers.
It would be extremely unlikely that the AirPort Extreme would be able to extend or repeat a wireless signal from another manufacturer's router.
I suppose that it could not hurt to try, but if the Extreme is still unopened, it might be a better idea to return the Extreme, get the information about the router at the neighbor's and then use a product from the same manufacurer that would be compatible to repeat or extend the wireless.

How do I connect my Airport Extreme to an AT

How do I connect my Airport Extreme to an AT&T U-verse Modem/Router?

Connect an Ethernet cable between the U-verse router's LAN port to the WAN (circle-of-dots) port on the AirPort Extreme Base Station (AEBS). Since you will have two routers in series, you will want to reconfigure the AEBS as a bridge. (ref: AirPort Utility > Select the AEBS > Manual Setup > Internet > Internet Connection tab > Connection Sharing = Off (Bridge Mode))

Internet connection via Airport Extreme/router thats not working, why?

I have been having problems with the internet connection via Airport Extreme which I find it a bit unusual and its still driving me nuts! This is what happened:
I have lost my internet connection last Sunday evening upon my return from a weekend away from home. The last time I have used the internet connection on my macbook was the previous Friday morning. Prior to the apparent disconnection on Sunday, I have always used my internet connection wirelessly through Airport Extreme (that is connected via ethernet cable to the NETGEAR DG834v2 ADSL modem which had worked beautifully until the problem arose on my return). This wireless internet connection allowed me to surf the internet anywhere in my home.
However, upon the successful re-connection to the internet via the modem router, I have discovered several new problems. I have tried to set up the internet connection wirelessly again but instead the following happened:
1. Router (Netgear) drops ADSL connection and cannot reconnect when connected to airport via Ethernet. (which is the case when using airport wireless).
2. Router connects to ADSL fine when computer is connected to it via Ethernet. (However, router disconnects when magsafe power adapter is taken out for some inexplicable reason!)
3. Router connects to ADSL fine when nothing is connected to the router (ie. No Ethernet connections)
4. Router connects to ADSL fine when connected to airport via Ethernet and computer is connected to airport via Ethernet.
So from the above, I cannot connect to the internet properly whether wirelessly or not so I suspect it could be faulty router or could it be airport extreme? I have asked my ISP for an explanation and all they have said is that it cannot be the mis-configuration but could be to do with the power adaptors or the way plugs are set up and suggested I take out all the power plugs (and power surge protector) out to switch everything off, the macbook, router, printer and airport extreme. However, when I have re-plugged them all back in, the problems I have described above still persists!
Would appreciate any help if anyone here recognises why this is the case and what seems to be the cause of this. If so, what should I do? Though I have written back to my ISP again yesterday for more help so im waiting to hear from them...
Thanks
u2dougal

I have been having problems with the internet connection via Airport Extreme which I find it a bit unusual and its still driving me nuts! This is what happened:
I have lost my internet connection last Sunday evening upon my return from a weekend away from home. The last time I have used the internet connection on my macbook was the previous Friday morning. Prior to the apparent disconnection on Sunday, I have always used my internet connection wirelessly through Airport Extreme (that is connected via ethernet cable to the NETGEAR DG834v2 ADSL modem which had worked beautifully until the problem arose on my return). This wireless internet connection allowed me to surf the internet anywhere in my home.
However, upon the successful re-connection to the internet via the modem router, I have discovered several new problems. I have tried to set up the internet connection wirelessly again but instead the following happened:
1. Router (Netgear) drops ADSL connection and cannot reconnect when connected to airport via Ethernet. (which is the case when using airport wireless).
2. Router connects to ADSL fine when computer is connected to it via Ethernet. (However, router disconnects when magsafe power adapter is taken out for some inexplicable reason!)
3. Router connects to ADSL fine when nothing is connected to the router (ie. No Ethernet connections)
4. Router connects to ADSL fine when connected to airport via Ethernet and computer is connected to airport via Ethernet.
So from the above, I cannot connect to the internet properly whether wirelessly or not so I suspect it could be faulty router or could it be airport extreme? I have asked my ISP for an explanation and all they have said is that it cannot be the mis-configuration but could be to do with the power adaptors or the way plugs are set up and suggested I take out all the power plugs (and power surge protector) out to switch everything off, the macbook, router, printer and airport extreme. However, when I have re-plugged them all back in, the problems I have described above still persists!
Would appreciate any help if anyone here recognises why this is the case and what seems to be the cause of this. If so, what should I do? Though I have written back to my ISP again yesterday for more help so im waiting to hear from them...
Thanks
u2dougal

HT204057 Time machine back up via USB hard drive connected to Airport Extreme.

Why did Apple stop supporting time machine back-up via USB hard drive connected to Airport Extreme? It worked very well.

Why did Apple stop supporting time machine back-up via USB hard drive connected to Airport Extreme?
Time Machine backups are supported via USB hard drive connected to the AirPort Extreme"ac" version.
Time Machine backups were not supported via USB hard drive connected to earlier versions of the AirPort Extreme.
Some users who tried this on earlier version AirPort Extremes seemed to have some success with Time Machine backups....some had moderate success and some had no success with this. Count me in the "no success" category.
See the topic about Time Machine support for USB disks in this Apple Support document:
http://support.apple.com/kb/HT5924?viewlocale=en_US&locale=en_US

Iphone4S doesn't connect to airport extreme

Similar Messages

Maybe you are looking for