IPhone4s OS6 Upgrade - Message Send Issues

I have Iphone4s and upgraded to os6 and have found an issue with Messages.
Bofore the upgrade I used to send sms messages by going to Messages>New Messsages and select contacts.  Now when I when I try this to send from message the message snd fails.
However if I go to Contacts>Select Contact>Send Message to the same contact it works.  This only happened after the upgade.
This shows there in no network issues, no problem with the specific contacts but sending an SMS from Messabes is different from sending a Message from Contacts.
Has anyone esle had this problem

Hi,
I have tried closing down all apps, checking for upgraded, resetting all network settings etc.  I have also tried the hard boot.  None of the above help.  Attached is the message I get when I send via the messages.
However, if I go into Contacts>Select Same Contact and Send Message it works.  I have noticed that when you use this message it goes as an imessage.
Thanks

Similar Messages

  • On a iphone4, under settings, messages, send and receive, there are multiple phone numbers listed.  How do I remove them? they are constantly checked even when i uncheck them.  this is causing copies of my text messages to go to those phones.

    on a iphone4, under settings, messages, send and receive, there are multiple phone numbers listed.  How do I remove them? they are constantly checked even when i uncheck them.  this is causing copies of my text messages to go to those phones.

    Are you using the same AppleID for all those phones? If so, get them all their own AppleID.
    KOT

  • Messages+ Sending Issues (HTC One M7)

    I have been having trouble sending text messages when my WiFi is connected. Usually no trouble when it isn't connected. Message says sending for a long time and sometimes it sends but doesn't say it was sent. What can I do to fix this?

    Hi Lindsey
    I have 4 bars (sometimes 5) and this is still occurring. I tried restarting the phone numerous times after the update and just plain turning it off and on. I am using the factory text messaging app, and every text I send I get the "converting to MMS" banner. I then have the grayed out message symbol with the clock in the corner for at least 10 minutes. Then I get the red triangle of death !!
    Chris

  • Nokia messaging send issue

    Latest version of Nokia Messaging on N97. Following delvery email failures comes in after send of each email:
    500: Failure - sun.security.validator.ValidatorException: PKIX path building
    failed: sun.security.provider.certpath.SunCertPathBuilderE xception: unable
    to find valid certification path to requested target
    I tried both pop and imap modes. The original mail client works fine. 

    Ah, glad I found this post. Bit annoying that I can't securely talk to my own mail server what I built when trying to send email, but it works fine when receiving securely from exactly the same machine. Would be nice to be able import the certificate during setup of my email, some Nokia-side Cert management thing.

  • I have Adobe CS4..... now when I want to print my picture, I get the message "Adobe CS4 has stopped working, sending issue to windows and then disappears.... nothing can print anymore...Help??

    I have Adobe CS4..... now when I want to print my picture, I get the message "Adobe CS4 has stopped working, sending issue to windows and then disappears.... nothing can print anymore...Help??

    Try updating the printer driver.

  • Since last weekend (3-15-15) I have been unable to send/receive text messages with a friend who has Sprint service. The messages send with no errors on either side, but neither side is receiving the messages. Is anyone else having any similar issues?

    Since last weekend (3-15-15) I have been unable to send/receive text messages with a friend who has Sprint service. The messages send with no errors on either side, but neither side is receiving the messages. It seems to be only this one person affected by this issue, everyone else that I've tried sending messages to has responded with no trouble. Is anyone else having any similar issues?

    Retrohacker, Your text messages are too important to be missed! Let's figure this out, together. Are you able to successfully make and receive calls from your friend? Which phone do you have with us? Any new messaging applications or changes that you can recall on the phone since this issue began? Please share details so we can get to the bottom of this for you.  TanishaS1_VZW Follow us on Twitter @VZWSupport  If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • I have an iPhone4S. keep getting message that storage is almost full. Cannot upgrade apps.

    My iPhone4S keeps getting message "storage almost full". See Setting.  Not enough memory to upgrade to IOS7. Cannot update Apps.
    My email "Sent" & "trash" has disappeared.  Can I get more storage or should I upgrade to iPhone5S?  Nothing has been backed up.
    Help!
    Thanks!

    Move the videos and pictures stored on the device to your computer and create more room on the device.

  • While send/receive email, I have received an error message "Sending of password d"? However with same login details, I am able to login with other application.

    While send/receive email, I have received an error message "Sending of password d"?
    However with same login details, I am able to login with other application.
    I have changed password still the issue remains as it is.

    https://support.mozilla.org/en-US/kb/cannot-send-messages

  • Message lost during Message Send in weblogic 9.2 JMS

    I am using Weblogic Server 9.2 in a clustered environment (2 nodes in separate machines). The application deployed has ejb timers which picks up data from DB, and sends text messages (very small size as its just an ID) to a Queue (using the JMS APIs - QueueSender.send(message)). There is an MDB (with max-beans-in-free-pool) configured to be 20 listenting to this message. There might be 1-20 records picked up from the DB and the id of those records will be sent to the JMS Queue as separate JMS messages. i.e. QueueSender.send will be called as many times as there are record ids to send. The timer after sending the message to the queue sets the status of all the data it picked up to "Busy" in the same transaction as the message send. We are using XA driver and the JMS Connection factory is also XA enabled. We had problems with this XA transaction as weblogic sometimes sends the messages and before db commit happened to set the status to "Busy". We had a workaround to this problem by setting the JMS Connection factory setting "time to Deliver" to 300 so that the messages are visible to the MDB only after 300 ms thereby giving time for db commit to be over as per the suggestion in the following link. http://jayesh-patel.blogspot.com/. We had done this 2 months back and to date we find no problem.
    Now we are facing another strange problem. The JMS sometime misses delivering the messages. This is evident from the logs we had printed from the MDB. The logs indicate some messages has reached the MDB and some did not. This problem occurs occasionally. Also what I see is that this had occured under normal load conditions only though this application operates under high loads (number of messages being processed per day may go up to 5000). In the last one month this had occured 3 times. The JMS messaging is becoming unreliable.
    This seems to be a bug in Weblogic 9.2 JMS. Is there any workaround to prevent this problem. ?

    It is doubtful that JMS is losing messages. Suggestions:
    * Try increasing your sheduled message delay. 300 millis is a short delay -- any small network glitch, disk hardware issue, or even a single JVM GC in the JDBC driver can cause the database to take longer than 300 millis to complete its part of the transaction.
    * Try "WebLogic JMS Message Lifecycle Logging" if you want to trace message activity.
    * Instead of the delay, consider using WebLogic's Datasource "LLR" option, a commonly used solution to your use case. This is an optimization option that yields fully ACID (safe) transactions, and has the very nice side effect of deterministically forcing the TM to always commit the database portion of a transaction before committing any other resources participating in the same transaction.
    Links:
    http://download.oracle.com/docs/cd/E13222_01/wls/docs92/jms_admin/troubleshoot.html
    http://download.oracle.com/docs/cd/E13222_01/wls/docs92/jta/llr.html#LLRfailover
    http://download.oracle.com/docs/cd/E13222_01/wls/docs92/jdbc_admin/jdbc_datasources.html#llr
    Tom
    Edited by: TomB on May 7, 2010 5:20 PM

  • Firmware upgrade encountered an issue

    Right now my Galaxy S3 is sitting at a screen that states "Firmware upgrade encountered an issue.  Please use Software Repair Assistant & try again."  Whenever I power on my phone, I get that message.  I've tried to do an Emergency Recovery in both Kies and Kies 3, but neither are able to recover, and the only way, it seems, to get the SRA is to plug my phone into my PC and get it from Autorun.  Since my phone is not leaving the error screen, I don't get the auto run option to install the SRA.  Is there any way to download it manually to get my phone running, or is it pretty much bricked and I'll have to look at replacement options?

    I found a solution on the XDA forums site, but thanks anyway.  Looks like I just needed to run the Software Repair Assistant, which I'm a little surprised that the Verizon store I went to didn't have it on hand to attempt to fix my phone.  I got my device repaired, and it's working great.  Just really wish my Wiimotes worked in Android 4.3. 

  • Duplicate Message ID issue in case of Multi mapping (without BPM)

    Hi Experts,
    I am doing one sample Example for my requirement of converting the single source message data into the multiple Target messages.
    for example, when sender system is sending the 5 sale order details into a single message in PI then my Inbound proxy class of ECC R/3 receiver system must get this sale orders separately, that means inbound proxy class method must be triggered separately for 5 sale orders from sender system. for achieving this, I have used the Multi mapping concept in ESR (without BPM).
    This scenario is in Asynchronous mode.
    The below screen shots give the details on what I have configures so far.
    IN ESR
    IN ID
    IN SXMB_MONI of PI
    IN SXMB_MONI of ECC R/3 Receiver system (Error in Processing)
    due to this error, inbound Proxy class method is not being triggered for the single Sale order details as well,
    please let me know how to tackle this duplicate message ID issue when we have multiple payloads to process in a single message.
    please also let me know if is there any other workaround to fulfil this requirement.
    Thank you,
    Regards,
    Jagesh

    Hi Nunu,
    Check the below blog for restrictions.
    Multi-Mapping without BPM - Yes, it’s possible!
    Restrictions
    Messages that result from the split in a mapping-based message split are sent using one AE. So only adapters running on the AE are supported. In particular, this means that target IDOC message splits are not supported since the IDOC adapter is not part of the AE.
    Regards,
    Praveen.

  • All my photos in the iphoto have disappeared, not sure if this related to any iphoto upgrade or other issue, tried to find the photos through the finder (JPG or photo) but failed, can you help me to get back my photos please?

    All my photos in the iphoto have disappeared, not sure if this related to any iphoto upgrade or other issue, tried to find the photos through the finder (JPG or photo) but failed, can you help me to get back my photos please?

    Help us to help you: There are 9 different versions of iPhoto and they run on seven different versions of the Operating System. The tricks and tips for dealing with issues vary from version to version and OS to OS. So before anyone can help, they need information to work with. Basic stuff:
    - What version of iPhoto.
    - What version of the Operating System.
    - Details. What were you doing when the problem arose?
    - Did it ever work properly?
    - Are there error messages?
    - What steps have you tried already to solve the issue.
    Anything else you can think of that might allow someone else to understand your issue.
    With this kind of information somebody can develop a starting point for troubleshooting the issue.
    Posts that consist of "iPhoto doesn't work. Help" or "iPhoto won't print" or "Suddenly I have no photos!!!!!!!!!!" mean that any helper is simply guessing. More information means you get better assistance. (And no, more exclamation marks do not get help faster or make your issue seem urgent. They just make it seem like you have a stuck key )

  • Nokia E52 Message Sender Name Field is not updated...

    Nokia E52 Message Sender Name/Field is not updated automatically on Firmware 054.003!
    Issue 1: Message Sender Name/Field is not updated automatically after changes made in contacts.
    e.g. Message send by Mr. A is displayed in inbox, however when same contact changed to Mrs. AB in contacts does not update sender name/field inside inbox. Sender name remains Mr. A physically on handset. However the changes made to contacts and Message Sender Name/Field is updated automatically on use of Nokia PC Suite 7.1.60.0 and Nokia Ovi Suite 3.0.0.290 but not on phone. 

    Thanks for sharing the answer here, it is really helpful for others with the similar issue.
    Qiao Wei
    TechNet Community Support

  • Why do i keep getting "Message Send Failure" every time I send pictures on iMessage? All are sent to other iPhone/iPad users.

    For a few months now, I've been getting "Message Send Failure" every time I send pictures to other Apple devices (iPhones, iPads, Macs), despite the recipient receiving them. So, even though the pictures are going through, the "Message Send Failure" notice keeps showing up. I checked with other people who have Apple devices and they also encountered the same issue whenever they send pictures (usually send an email to make sure it was received).  I thought when iOS 7.1.1 came out that it would fix this issue. Has anyone else encountered the same issue? Thanks!

    I started getting the error on my iPhone 5 (iOS 7.1.x) several weeks ago - if not a month ago. Today I finally decided to run through a wholesale sign-out/sign-in process on all my devices (iMac, MacBook, iPad 1, iPad 3 and iPhone5) and it worked!
    I signed out of iMessage/Messages on all devices. I also deleted my iCloud accounts on all my devices (make sure you tell the software to keep local copies when you are prompted - relax, it all stays in the cloud, too) Then I signed back in to iMessage/Messages and then re-added iCloud accounts all around. I just sent a message with a photo attachment and did not get the "Not Delivered" message - yay!
    (FYI - even though I received the error every time I sent a message with an image attachment, the message still went through - very, very happy, though to finally get rid of the message...)

  • TS2755 Receiving "Message Send Failure" notification, but messages are going through?

    For the past few days, I have been receiving a "Message Send Failure" after every iMessage that I send. The messages are going through, but I still receive the notification every time. I have restarted my phone, signed out of and back into iMessage, and reset my network settings. Nothing seems to be working. Anyone have a solution? I'm having the same problem on my iPad, which leads me to believe it's a problem with iMessage at large as opposed to a device problem. Thanks!

    If you have others that are receiving your imessaging  but not the group you are attempting to send to then do this:
    Click on your text messaging area using imessaging enabled and then type a message to yourself. Do this test to verify that your imessaging apple server is working properly. IF you get the messsage back to you in BLUE this indicates to you that both the outgoing and incoming text messaging is working as imessaging. With this piece of information verified that will indicate there are connectivity issues with individuals or all that are a part of the group you are attempting to contact. Please do not conclude that at a point in time this communication worked via imessaging that there may be some in the group that are now having conectiviity issues of their own.
    Good luck, Friend.

Maybe you are looking for