Iphone4s stops working after resetting

I tried to reset my iphone 4s (got from AT&T) by General>Reset>Erase All Content and Settings
After I did that, the apple logo displayed and it just freezed. It's been 24 hours and I don't know how long I need to wait
What to do to bring my iphone back? Please help.

Reset, Hold both Home and Power buttons until the iPhone restarts itself. Usually takes less than 15 seconds.
If that does not work. Open iTunes on computer. Connect iPhone to computer. Hold both Home and Power buttons until iTunes recognizes iPhone in Recovery Mode. Usually takes about 20 seconds time of holding both buttons. Restore the iPhone Firmware.

Similar Messages

  • Iphone4 Stopped working after update

    Did the update wirelessly last night on 89% battery, it worked and then showed the plug into itunes icon, I logged onto itunes, updated to the latest version and then plugged my phone in.  It registered with the only option being a complete restore to factory settings, ***, anyway, felt it was my only option so I did it.  I then received an error 3194 message.  I disconnected, removed itunes from computer and reinstalled it.  I then tried again to plug my phone in but now it doesn't even register.  I have tried on 3 different computers including the one at the AT&T store, it doesn't register that it is connnected.  It also won't hold a charge at all and I occassionally get a blue/green screen where you can see the apple symbol in the background. 
    I was told that I needed to make an appt at the apple store which is conveniently over an hour away, but that not much would be done because my phone is not under warranty any more.  What gets me is my phone worked perfectly and now I am screwed out of a phone because of their update.  Any thoughts before I make the drive?

    Try http://osxdaily.com/2010/12/06/error-3194-fix-for-itunes/
    Allan

  • My AppleTV stopped working after power outage. Light is on and I rebooted and reset w remote but it keeps giving me a pic of the Hdmi cord like it is not recognizing the hdmi as being plugged in. I've unplugged it several times.

    My AppleTV stopped working after power outage. Light is on and I rebooted and reset w remote but it keeps giving me a pic of the Hdmi cord like it is not recognizing the hdmi as being plugged in. I've unplugged it several times.

    It is in recovery mode. The picture is telling you to connect to iTunes via micro usb cable in order to restore.
    http://support.apple.com/kb/HT4367?viewlocale=en_US&locale=en_US

  • Hi, my name is Amit, my hot corners stop working after some time. Have to go to mission control to reset them, however they stop again after some time. This is annoying. Can someone please assist to solve this problem? Thanks Amit.

    Hi my name is Amit, after upgrading to OS X Maverick I often have problem of my Hot corners stop working after a short period of time. I have to go to mission control and have to reset them for them to start working again. However this is temparory and they stop working again and this is quite annoying. Can someone suggest a cure to this problem please. I will be grateful. Thanks Amit.

    Back up all data.
    Triple-click anywhere in the line below on this page to select it:
    ~/Library/Preferences/com.apple.dock.plist
    Right-click or control-click the line and select
    Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A folder should open with an item selected. Move the selected item to the Desktop, leaving the window open. Log out or restart the computer and test. If there's no change, put the item you moved back where it was, overwriting the one that may have been created in its place. Log out again. Otherwise, delete the item you moved.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

  • My apple remote app on my iPhone 4S has stopped working after the 7.0.6 security update.

    My apple remote app on my iPhone 4S has stopped working after the 7.0.6 security update. It's not my home sharing or router setting, I have an ipad that I haven't yet updated that works completely fine and my network is run on the newest AirPort Extreme.

    i have same problem but much worst.. i update my iphone4s ios 7.1.1 to 7.1.2 and my iphone CAN'T READ MY SIM, MODEM FIRMWAY GONE, IMEI GONE, and same issue as you guys can't hear sound on my speaker but using earphone works, battery drain much faster than before. Any suggestion guys to Fix my iphone.thanks a lot. APPLE PLEASE FIX. TAKE ACTION.

  • USB hub and internet sharing stop working after sleep

    Hi,
    I have a relatively new Bluestork USB hub I purchased to connect multiple USB devices I have at the same time. It used to work correctly under Leopard, but now it stops working each time the computer wakes up from sleep. I have to restart the computer for it to start working again. Both link and power LEDs stay on, even when the hub is not recognized.
    My second problem is related to internet sharing. It stops working after each sleep/wakeup cycle and the only way to make it work again is to restart the computer. It used to work correctly before Snow Leopard as well.
    I have all the Mac updates installed.

    Thanks Barry.
    The hub is on its way to the manufacturer for after sales service...
    But the issue with AirPort remains the same, even after resetting SMC.
    Some clarification:
    * It happens just after computer wakes up from sleep. Restarting solves the problem and the issue doesn't arise until computer goes standby again.
    * The whole WiFi card becomes unresponsive. It is not only the Turn Off button, but the whole functionality is stopped. The card can not be activated/deactivated and it doesn't connect to any network. If it is used for internet sharing, clients are unable to connect.

  • My distributed form has stopped working after Acrobat did an update the form no longer appears in my tracker.

    I had a form that auto collected data through Adobe but it has stopped working after my Acrobat X Pro did an update.
    The form no longer appears in the tracker. How can this be fixed? I am using Windows 7.
    It would appear that since Adobe are going to be closing the Workspace area in January 2015 that when
    Acrobat did an update the ability to connect to files in the Workspace has been removed.
    Is there any way to reconnect the file back to the Tracker?
    Has anyone else had the same problem?
    Adobe don't seem interested in helping as this question has been posted for three days and yet no response.

    First and foremost thing you can do it is that reset your Firefox and after that change it to safe mode.This may be happening due to venerable links getting downloaded.
    enjoy free web..... :)
    regards,
    Gautam sharma.

  • I can't connect to Wi-Fi - keeps timing out. No problem connecting from other laptops / phones. Stopped working after I did a system upgrade. What can I do?

    I can't connect to Wi-Fi - keeps timing out. No problem connecting from other laptops / phones. Stopped working after I did a system upgrade. What can I do? I am on OS X Yosemite.

    Take each of the following steps that you haven't already tried, until the problem is resolved. Some of these steps are only possible if you have control over the wireless router.
    Step 1
    Turn Wi-Fi off and back on.
    Step 2
    Restart the router and the computer. Many problems are solved that way.
    Step 3
    Change the name of the wireless network, if applicable, to eliminate any characters other than letters and digits. You do that on your router via its web page, if it's not an Apple device, or via AirPort Utility, if it is an Apple device.
    Step 4
    Run the Network Diagnostics assistant.
    Step 5
    In OS X 10.8.4 or later, run Wireless Diagnostics and fix the issues listed in the Summary, if any.
    Step 6
    Back up all data before proceeding.
    Launch the Keychain Access application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    Enter the name of your wireless network in the search box. You should have one or more "AirPort network password" items with that name. Make a note of the name and password, then delete all the items. Quit Keychain Access. Turn Wi-Fi off and then back on. Reconnect to the network.
    Step 7
    You may need to change other settings on the router. See the guidelines linked below:
    Recommended settings for Wi-Fi routers and access points
    Potential sources of interference
    Step 8
    Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
    Step 9
    Reset the System Management Controller (SMC).

  • Don't know what to do or who to ask??? GPS stopped working after 4.4.2 Kitkat update.

    Don't know what to do or who to ask??? GPS stopped working after 4.4.2 Kitkat update.
    I have been on the phone multiple times with Verizon, visited multiple stores and still getting different answers with every different person I talk to...
    Since the 4.4.2 update, my phone and my wife's phone (14 or 15 month old SIII's) that worked perfect a couple weeks ago no longer know where they are 95% percent of the time... Location cannot be found and GPS satellites cannot be seen (sometimes after searching for 10 - 20 minutes they will lock on).
    And it's not just Google maps, it is all apps that need location (ie. gps status and toolbox, weather channel, etc...)
    Google maps has us in the right location 50% of the time  but i think that has more to do with 4g and wifi (although i always know the weather and traffic conditions in the next town over now).
    Navigation will set up fine in Google maps until you actual move the car. Then it updates location every couple minutes, but usually a couple streets over from where I actually am. Maybe 1 out of every four or five times I try it, it will start working about 15 minutes after I started it (then work flawlessly, so it can actually work sometimes). But if you end the process and start over to see if it really "works", back to square one with it not knowing its location all over again...
    I obviously did all the normal trouble shooting fixes with the battery and sim card removals and even did a "recommended factory data reset" on my phone with no luck. After this didn't work I stopped by another verizon store yesterday that has "tech services" that I was told could run some sort of diagnostics on my phone. After I showed the tech all the screen shots i have taken of what was happening while driving, he said it is a software problem and a very common one at that.
    I was told I should either buy new phones or switch to the edge program where i can get a new phones. These don't seem like very fair solutions to me considering before the 4.4.2 update our phones worked perfect and they are both in almost perfect condition after 14 or 15 months...
    Will there be a fix to this??? Is it a Samsung problem??? Should I be contacting them???

    If it is 3GS, you can update it to iOS 5 and it will work.

  • I have an iPod 4th gen and the bottom part of it doesn't work where the space, .?123, and the go buttons are I droped it yesterday but it started doing this an hour ago I can slide to get in but it's stops working after that someone tell me how I fix this

    I have an iPod 4th gen and the bottom part of it doesn't work where the space, .?123, and the go buttons are not working I droped it yesterday but it started doing this an hour ago I can slide to get in but it's stops working after that someone tell me how I fix this

    Try:
    - Reset the iOS device. Nothing will be lost       
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:                                                
    iOS: How to back up                                                                                     
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar                                              

  • Help, 10.6.8 update, all usb ports stop working after 10hrs

    I've been running 10.5.8 for ever and finnaly tried to update to 10.6.8.. After I did it, the usb ports all kick out any connected devises after around 10 or so hours. I ran of the install disk, using disc utillty, disk repair, and repair permisions a few times and it did not help.
    I did the install a few times  again to try to see if it would help and didnt.
    i tried an erase and install and migrated everything over from my orignal back up external drive that is running 10.5.8 and issue is still  there.
    My old 10.5.8 back up external drive works fine and does not have this issue, and I have been using that as my start up drive instead and working from there. But that is not really a solution and a temp work around.
    Any suggestions would really help. thanks!

    I have a early 2008 macbookpro 2.8 duel with silver keys.
    I purchaed the 10.6 disk from the apple store. I've had the machine for years and purchased it refurbished from apple.
    I did the erase and install and migrated everything over from external drive, then did update to 10.6.8 and the usb ports still would stop working after a few hours.. Then I read on another apple community forus to reset pram, and pull out the power cable, take out the battery and hold power key for 5 seconds, then restart. that seemed to fix usb issue so far..
    But overall my computer seems to be running slower then when using just 10.5.8 and it did not wake from sleep once and I had to force power off and restart.. But maybe its just getting used to 10.6.8. we will see..
    Also, on another note, my battery is totally dead, and I can only run computer with power cable.. Will this affect things? it never did with 10.5.8..
    Oh, on my erase and install, I just did the simplest version and did not do the full erase to zero using he advanced security measures.. I just did the one where it writes on top of everything..

  • The audio in "speak screen" stops working after a few uses. IOS 8.2 did not fix this problem unfortunately. I'm using the Alex voice on a Sprint iPhone 6 plus- if that matters.

    I really enjoy the speak screen feature, as the voiceover is too inconvenient and tricky to use. The speak screen option works oerfectly for reading, and helps me as I'm dyslexic. However, the Alex voice stops working after the initial use or soon after. I then have to restart the phone every time in order to get the speak screen to acruelly speak again. Really annoying and was hoping that IOS 8.2 Would fix this, but it appears it had not fixed this bug. Any help with this?

    Any problem when connected to another wi-fi network besides your own?
    The only additonal troubleshooting options after powering the iPhone off and on, an iPhone reset, and resetting network settings on the iPhone is restoring the iPhone with iTunes from the iPhone's backup and/or restoring with iTunes as a new iPhone or not from the backup.
    If no change after restoring as a new iPhone or not from the backup - the same when connected to any wi-fi network besides your own as well as not being able to maintain internet access when connected to your carrier's cellular network, the iPhone has a hardware problem.

  • Mail stopped working after replacing primary HD

    Apple Mail stopped working after replacing and restoring the Main Hard Drive in the upper bay.  Internet connection is good, and the Mail client troubleshooting (Comcast) was no help.  I can start the App, but it does not retrieve or send mail through Comcast anymore.  I have a MacBook Pro with the same settings and Mail works fine.

    Thanks for replying.
    This is odd because my PowerMac G5 with Leopard Mail cannot receive or send email.  Connection doctor is showing all red dots on every email account with Comcast (BTW, GMAIL accounts okay).  On my Blackberry, and my MacBook Pro (Lion), the setting are all the same, passwords, etc., and the later two have no issues.  I even created a test Administrator Account in "Accounts" in System Preferences on the G5, logged into the Test Account and tried to create a new mail account with the same settings, and yet during the set-up (Welcome to Mail), I get an error message that says Mail cannot log into Comcast's POP server with the current settings.  I have also tried changing passwords, no help. Also the usual disk repair, permissions,  motherboard resets, zapping PRAM, etc.
    Out of ideas...
    Thanks for any help...

  • My "9-o-l-." keys stop working after startup, and spreading! ahh help?

    My "9-O-L-." keys stop working after startup and my arrow keys too.
    Sometimes when I start up the keys will work for a bit then one by one stop functioning and then randomly work every so often, then it seems to "spread" to the right shift key, and sometimes the "8-I-K-," keys.
    Around the same time when this all began my Battery completely stopped working too, does this have anything to do with it? I've reset my PRAM and no luck.
    I'm planning on replacing the keyboard, will that fix the problem? or is it something deeper?
    Thanks in advance!
    -Andrew

    I assume you've rebooted? Can you control the computer well enough to make a new account and log into it? Doubt this will fix it but maybe. The keyboard may need replacing but it might also be that the cable has worked loose so that some of the wires have disconnected but not all. Sounds like a trip or call to Apple is in order.

  • Why do some apps stop working after update to iOS 6?

    I notice one of my apps stopped working after the iOS 6 update, in particular Uno HD, which I paid $5 for.  Why did this happen?

    I had solved the problem by installing the free app, which seemed to reset something, then I deleted the free app, and the paid version continued to work until the next day.  I was going to show one of my friends the game, and then it once again would not open- the same problem was back, as soon as I went to open it, it crashed back to the desktop without opening the game.  I had to re-install the free version again, and for a while, neither version would work, but then after a while, it started working again.  I guess I have to leave the free app installed or I won't be able to use the paid version of Uno.
    EDIT
    Just checked again, took the Uno app out of resident memory by double-pushing the home button and holding the app icon til it starts to shake, and then hit the minus symbol, which deletes it out of resident memory.
    Went to open it again, and it of course crashed back to the desktop again.  So there is some issue with it that is making it unstable.
    I have to keep pushing on either one of  the app icons continuously until one of them starts, and then the other one will start.
    Gameloft needs to do an update.
    Message was edited by: Sonic Bodhi

Maybe you are looking for