Iphone4s telling incorrect password after working fine for 2 weeks...

now after reset/restore .. i cannot even connect to any wifi network even if the password is 100% correct..
even the unable to back-up issue is poping up ...! .. help !!

Update: After about an hour, the 3GS finally changed to zero bars.
My guess is, ATT was having intermittent problems with the signal and the 3GS stayed at 4 bars while the iphone 4 dropped into and out of "No Service".
This morning (next day) they are both getting 4 bars. We'll see...

Similar Messages

After working fine for several months, my iPhone 5 has started dropping bluetooth connectivity for 2 to 5 seconds at a time with my Sony MDR-1RBT headphones. The headphones work fine with other devices. I haven't moved to ios7 yet. Any ideas?

After working fine for several months, my iPhone 5 has started dropping bluetooth connectivity for 2 to 5 seconds at a time with my Sony MDR-1RBT headphones. The headphones work fine with other bluetooth devices. I haven't moved to iOS7 yet. Any ideas?

What user troubleshooting have you done on the phone? The steps are restart, reset, restore from backup, restore as new. Understand that a restore will put the latest iOS on your device. It is also possible there is a hardware fault on the device and the Bluetooth is failing. Anything is possible given the scenario you describe.
And as far as iOS 7.x is concerned, we have 5 different iPhones here at home, all with the latest iOS, a 4, 4s, 5c, and 2-5s and all are working just fine. So, a blanket statement such as the one provided by the other poster is not completely true. Others are not having any issues at all either.

IPad and iPhone 4 and new 5s drop connection with airport express. This just started recently after working fine for a year. PC does not drop. Wifi signal fine. Help?

Streaming music with airport express and Apple TV to 2 different systems. No problem with Apple TV. iPad and iPhone 4 and new 5s keep dropping their connection to airport express. Airport express connection to wifi appears to be fine. No dropping by windows PC. This just started recently after working fine for a year. Help?

What does any of this have to do with the Apple TV?

Unable to login to IMessage in my new ipod touch 5th gen, saying wrong password. but the same password is working fine for my applestore.

saying wrong password. but the same password is working fine for my applestore.

Im Getting The Same Problem With My Ipod 4th Generation
Seems Like This is a Software Issue
Help Please

I have the latest itunes and I use Windows and suddenly after working fine for years, itunes will not synch with OUtlook anymore. Any ideas?

I have the latest itunes and I use Windows and suddenly, after working fine for years, itunes will not synch with Outlook anymore. Any ideas?

Contact NIK for updated/upgraded versions of their plug-ins. They have been having a lot of issues with their plug-ins.

I have a iPad Keyboard Dock for the iPad 1. I purchase an iPad 2 and the dock worked fine for a week no fit problem none worked. I received a tiny message about iPad Keyboard Dock it stop working immediately after dismissing message.

I have a iPad Keyboard Dock for the iPad 1. I purchase an iPad 2 and the dock worked fine for a week no fit problem none worked. I received a tiny message about iPad Keyboard Dock it stop working immediately after dismissing message.

Hi and welcome..
Connect your iPad to your computer. Launch iTunes. Make sure your iPad is recognized in iTunes under Devices on the left.
Select the Summary tab then click Update.
Just to make sure your iPad software is up to date.
Carolyn

Microcell stopped working after working fine for over a year

Hi everyone, My Microcell stopped working after working fine for over a year
What happens now is that when it boots up all is green but the wireless network bars LED keeps flashing forever.
I know that as part of the normal boot process it first scans all 3G channels to pick the least conflicting ones before it initializes the internal 3G radio. Typically that takes good 10 minutes. However now it never finishes that scan and gets stuck there blinking green forever. Obviously nothing has changed on my side of things; I don't know whether something has changed in the neighborhood in terms of AT&T area controller or what not. Any help will be very much appreciated. Thak you!

Answer ALL the questions below as best you can and we'll try to help you.
MicroCell™ TroubleShooting Questions:
Have you read the Tech Guide first? 3G MicroCell Technical Guide by Otto Pylot
Do you have an active postpaid AT&T mobile account?
Is your MicroCell white or black?
Who is your ISP and is your service ADSL, cable, wireless or satellite?
What are your suscribed download and upload speeds as stated by your ISP?
Have you tested your internet speeds (http://www.speedtest.net/)? Please run the test and post your latency, download and upload speeds.
Have you tested your connection for VoIP quality (http://www.voipqualitytest.com/)? Please run the test and post the results that are listed under the "Advanced" tab.
Are you using the basic connection (modem -> router -> MicroCell) or the alternate connection (modem -> MicroCell -> router/computer)? The alternate connection is not possible with the black (DPH-154) MicroCell as it has no Ethernet output but it can be connected directly to the modem to temporarily test the Microcell without the network connected.
Are all of the cables firmly in place?
Do you have a combined modem/router (gateway) or a separate modem and router? What are the makes and model numbers for your equipment?
Have you met the minimum requirements for router settings as outlined in the Tech Guide?
What other equipment (access points, switches, computers, WiFi components, gaming consoles, etc.) do you have connected to your network?
What does the light pattern look like on the MicroCell (power, ethernet, GPS, and 3G)? Are they all a solid green or is any of them blinking green or red, and if so, which one?
Have you done a hard reset of the MicroCell? See the Tech Guide for instructions.
Have you deactivated and reactivated your Mcell using AT&T's MicroCell website?
Does the ac adapter feel warmer than the top of the MicroCell where the vents are?

Nforce 3 Platninum and 6800GT works fine for a week or so then fails to boot.

Hi everyone,
I have read pretty much all the posts on the forum, but none show the exact same problem as mine, as far as I can see.
I have an MSI Nforce 3 plat mobo (with latest BIOS), which is turning out to be the worst investment I ever got.
My specs are as follows:
2x512MB Kingston ram
AMD 3.5
pixelview 6800gt
raptor HD
thermaltake 480W PS
I upgraded to the nforce 3 for the 939pin socket for my AMD chip. I had constant freezing, so my old memory I had to chuck and buy 1GB of Kingston ram. Using my old ATI 9800pro my system was stable. Absolutely no crashes. I decide to buy a pixel view 6800GT AGP card to upgrade. Cool. Plug it in, reload windows (latest WHQL drivers from NVIDIA). Everthing is fine, for about a week. Then bad things start to happen. The symptoms are:
Turn machine on, BIOS check all ok, machine does DMI listing. As soon as the "starting windows" screen comes up, the video display goes corrupt. Either white, with diagonal lines, or windows XP logo all over the screen several times and corrupted. The machine does boot into windows, but the screen is blank or corrupted. I hear the windows startup sound click in. Press the power button, shut down the machine. Reboot. It usually comes up fine.
I thought initially it was the graphics card, so I swapped it out. Reloaded windows. All works ok for about a week. Then, again same problem. Windows event viewer shows no errors.
My question is this: can this be fixed or is it hardware incompatibility. If so, can I fix it tweaking the mobo settings. I have tried the AGP fast writes, didn't work. This looks like intrinsic Hardware incompatibility, but if it is this, why does it work for a week without any problems, and then it gets worse and worse and worse.
If this is a hardware problem, what is the cheapest way to get out of this. Is MSI nforce 4 any better or do I ditch pc gaming all together. I have been gaming from XT days, and I have to say, I am totally disheartened with this whole mess. The one thing in my life that I do want control of is a bootable, reliable PC to relax with at the end of the day. At the moment, I just shed tears as it is turning out to be a costly nightmare.
Any help would be greatly appreciated. My friend has offered to buy the 6800GT from me, and give me my old 9800Pro back. Should i do this???
Thanks guys
John

Hi Makisst,
Thanks for the reply.
System specs are as follows:
AMD 3500 64
MSI Neo Platinum (nforce3)
Creative labs Audigy2 pci card
Pixelview 6800GT AGP 256MB
Kingston DDR400 512Mb PC3200 400Mhz x2
MSI K8N NEO2 PLATINUM 939 pin (MS-7025-010)
Western Digital Raptor™ 74.0Gb 10,000RPM SATA150
Themaltake 480W power supply.
I have 2 extra ATA HDs, which I have not added to the system to rule those out.
I have a DVD player (bog standard MSI) and a CD burner (not plugged in so as to rule this out).
The only thing I have not tried is removing the sound card (audigy 2). What is driving me absolutely nuts is that the machine works fine for a week. Then there is a slow degrade. First boot, scrambled screen, second boot fine. Then a few days later, it will only boot the thrid time around. Then after 2 weeks, it won't boot at all.
I have tried this card in another persons machine (the 6800GT that is), and it boots fine.
I can honestly say I have not tried playing with the BIOS settings except for AGP fast writes, as it was working fine with the Radeon 9800 pro. I have done two full HD formats, and completely wiped the Raptor twice now.
I shall have a look at the BIOS settings you recommended tonight, and see if they make a difference. I am, to be 100% honest, a little bit scared of playing with the BIOS settings, as I really don't know what I am doing. I see that the ppl I bought the machine off have set timings in the BIOS to 3-3-8-3 (I think, I will confirm this tomorrow), so should I leave these settings?
I shall also remove the Audigy 2 card and see what happens. System properties show machine has no conflicts though. It is almost like the card is not initialising correctly. Why this happens only after 1 week though I have no idea. This is the third time it has started happening after 1 week.
The only extra software loaded is Norton, Win XP SP2 and directX9. I really have not had it stable enough to start loading extra software. I am getting too tired after reloading for the third time in 6 weeks.
I will let you know tomorrow either way.
Many thanks
John

My macbook from 2008 which I bought used worked fine for 3 weeks and then suddenly it started restarting and now it restarts, goes to grey apple screen and a code saying something about a kernel panic appears and it restarts again and again. Help?

My macbook from 2008 which I bought used worked fine for 3 weeks and then suddenly it started restarting and now it restarts, goes to grey apple screen and a code saying something about a kernel panic appears and it restarts again and again. Help?

Restart the computer and immediately hold the Option key down.
Select the Recovery partition and continue.
On the next pane, select Disk Utility and continue.
When DU opens, select your hard drive in the left column, click the First Aid tab, the click Repair Disk.
When that is done, quit DU and restart in the usual way.

My brand new back up drive is connected but now time machine has disappeared after working perfectly for a week. - no icon, not appearing as an option to save to - have rebooted everything a few times.

My brand new back up drive is connected but now time machine has disappeared after working perfectly for a week. - no icon, not appearing as an option to save to - have rebooted everything a few times.

It's not clear whether you were able to do any backups to this drive at all. If not, it's probably not formatted properly. See #5 in Time Machine - Frequently Asked Questions for instructions.
If you did get any successful backups, there may be a problem with the drive, or the backups may be corrupted. Try to repair the backups, per #A5 in Time Machine - Troubleshooting.

After working fine for over a year, 160 quits working and goes into recover

So, I've had my 160gb iPod for awhile, and it has basically worked fine for a while.
Occasionally, it skips, but I just said whatever, and let it be.
Anyway, today I listened to it frequently, and it started to take about 15 seconds to actually start a song that I picked. So eventually, I became tired of it.
I went to play one song, and it skipped it and the other tracks after it.
I had this problem before, but after converting them to .m4a they worked fine.
However, these songs were already .m4a, so there wasn't too much I could really do.
So, I decided to restart the iPod with the standard Hold on off, select-center button at at the same time thing.
And then I tried to turn it back on, and when I did, it informed me that I needed to restore the iPod.
It showed me a snazzy picture of the USB cable, and explained it to me in a few in a few other languages.
So, I plugged it into the computer to try and get around it, and it informed me that the iPod was in recovery mode?
I've never heard of this, and I ultimately have no idea what to do. I don't want to have to restore, but I guess I'm going to. I'd really like to know why it freaked out on me though.

See if this helps.
iTunes has detected an iPod in "recovery mode".

Google Calendar no longer syncing with iPhone after working fine for a while

I have been syncing my Google Calendar with mine and my wife's iPhone and iCal (on my Mac) for about a year now, and it worked flawlessly...up until a few days ago.
She noticed that her iPhone calendar was completely blank, which prompted me to look at mine. Yep. Gone also. Everything is still in iCal. After fiddling around in the iPhone settings, both of our calenders seemed to magically reappear....then a few days later....gone again.
I see myself as pretty tech-savvy, yet I am perplexed. What is going on here? Is it a bug since it worked fine all this time and just stopped working?

I'm on a 4S IOS 7.1 won't show my Google Calendar I have about 8 that should be showing. FIXED!!
I'm posting this here because your answers didn't help with my particular problem but aimed me in the right direction. so maybe this will help someone else.
------------------------------ This is what I tried ------------------------------
At the bottom of the calendar app click Calendars there should be a check to the left of your calendar. (my calendars weren't even listed here)
The google.com/calendar/iphoneselect solution. (mine was checked correctly)
Google 2-step verification (I even turned this on to see if it would help)
Deleting all accounts “Settings – Mail,Contacts,Calendars – Accounts” and starting over
------------------------------ My Solution ------------------------------
Since I deleted all my accounts already this is what worked I don't know why.
Under “Settings – Mail,Contacts,Calendars – Accounts”
I added my google account “add account” “Google”... so on. Calendar was selected.
I added a second account “add account” “other” (at bottom) scroll down to “add CalDav Account” under calendars.
Server= www.google.com
user name = your email
password = your password
description = whatever
Calendar was selected.
Then I went to “Settings – Mail,Contacts,Calendars – Accounts” and down towards the bottom I clicked “default calendar” and set it.
I hope this helps

500 GB Hard Disk will not mount on iMacs (after working fine for months)

setup : 2x iMac 24" 10.5.6..wired to airport Xtreme, Iomega 500 GB HD connected via USB
this drive worked fine and has all the pics on it and was used to backup both iMac's via Time Machine.
Today the Airport Xtreme (AX) gives us a flashing orange light and informs us that the 500 GB Iomega disk needs to be connected to the mac and needs to be repaired.
so...we did, with a "disk appears to be OK " message after 'repair'
mounting from within Disk Utility gives us : "The disk “500HD” could not be mounted.
Try running First Aid on the disk and then retry mounting."
(we did just that...!)
We also tried "Drive Genius" with the same results.
whether we hook the drive to the AX or directly to the iMac...no mounting.
The drive (and it's partition) does appear perfectly in both 'Disk Utility' and in 'Drive Genius'
(The iMac does mount other USB items like mem-sticks, camera's just fine.)

While it doesn't sound like this is really the problem since OTHER devices work on the USB ports, never the less, it is an easy thing to try out anyway.
First thing to do is reset the USB chip set on the mother board. Unfortunately, when you power down the computer there is always a bit of power still applied to the motherboard to keep things alive and this usually includes powering the ports to do stuff like detect when a device is plugged in or wants to wake up the computer. The downside of this is when a bus/port chipset goes into a weird state, locks up, etc., simply power cycling (shutdown & restart) the computer won't work.
So first thing to try is resetting the chipset and to do this you have to power down the computer and completely unplug the computer from the wall power (unplug the power cord to your Mac). Also unplug everything from the Mac's ports (USB, FW, Ethernet, etc.) to make sure no parasitic power is still there to keep the chipset alive. Now let it sit for a minute (give those big power caps in there time to discharge). Now reattach the keyboard & mouse only, plug the power cord back in, & start up the Mac. Now see if your USB ports work any better.
Best of luck!
Patrick
What to do if your computer won't recognize a FireWire or USB device
http://support.apple.com/kb/HT1317?viewlocale=en_US

Why are my PalPal buttons not working properly after working fine for weeks?

I have not touched the site till I heard there was a problem today. The dropdowns are not showing up.
https://www.appne.net/events.html
Sometimes if I hit refresh or republish the site, they show up again. then after testing to see if they work, they disappear again.
I just upgraded to the April 2 release to see if it helps and it did not.
I talked to paypal and tested the buttons on their testing website and they worked fine.
I did not use the widget in Muse to create...I cut and paste the code from paypal.com button creator.
Anyone else having the same issue?
Please help if so. Thank you!
Marie

Hi Marie
I checked the drop downs and paypal button, it works fine on my end.
http://take.ms/dhdkR
Please try to clear browser cookie and then check , or try with a new browser.
Thanks,
Sanjit

AirPrt Express dissapears from AirPort Utility after working fine for a bit

I got an Airport Express, set it up as connect to existing wifi network. All works fine, and the speakers show up in ITunes. But then suddenly after a couple of minutes of working fine, it just disappears from iTunes, and is also gone from AirPort Utility, although the light is still green on the AirPort Express unit.. I then have to reset and all restart and all sorts before it comes back. And the goes away again after a couple of minutes. This is not dropping out. It completely disappears, BUT the light on the Airport Express is still green?
Any ideas?

My problem is almost the same. Today i set up my new Airport Express. It worked great. Then I tried to add another computer to the network. And it worked as well. But after one last change (can't remember now exactly which one) the AX resent and never came back. Got a green light but the Airport Utility no longer finds it. Tried soft, hard, factory resets. Green light all the way. But it's like it's not there. Neither computer "sees" it.
Any help would be a godsend.

Iphone4s telling incorrect password after working fine for 2 weeks...

Similar Messages

Maybe you are looking for