Iphone4s use as a router??

Can a iphone4s use as a router??

Yes. If you have iOS 6 installed, go to Settings, and then 4th one from the top (could be "Internet Sharing" or something like that. It's under Bluetooth. My iPhone is not set in English). Tap that, and flick the switch at the top. You may designate your own WiFi password for other phones and computers to use.

Similar Messages

New Ipod Touch 5g can't access Internet in home network (using Linksys E4200 router). But, OK with other Wifi.

Just bought new Ipod Touch 5g. I found out it can't access Internet in home network. not really cannot access, but very slow to open any web page, App Store failed to access, etc. But, OK with other Wifi (office & starbucks). Others existing iOS devices (Iphone4 & Ipad2) have no problem like this. I'm using Linksys E4200 router at home. anyone has any idea why?

Try:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>GeneralReset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

I have a first generation ipod touch. I use a wireless router to get on the internet. My connection has frozen and I can not get out of a google search screen. Any help is appreciated. Ray.

I have a first generation ipod touch. I use a wireless router to get my internet connection. It is frozen on opening up a website and will not release. Even when I power down and restart it goes back to the same failed connection. Any ideas greatly appreciated. Ray.

- Try resetting the iPod. Nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to Settings>Safari and delete cookies, cach and history.
- Restore the iPod

Can I use a wireless router to share a USB broadband connection

Hi - I have an emac or a mac minin which have a USb boradband modem. I use airport from the emac to allow me to connect from an airport enabled powerbook when it is at home.
Rather than getting an airport card for the mac mini, could I use that as the primary conection to the internet (via the USB modem) and then get a wirless router (eg netgear MR814) an I use a wireless router to share the USB broadband connection to the 2 airport enabled macs?
Or do I either:
1) need to get airport for the Mac Mini
or
2) Get a ethernet modem to plug into the wireless router
Any advice appreciated?
Tommy banana

Sorry my first post was a little unclear.
Hi - I now have an emac and a mac mini, both of which which have a USb boradband modem. I use airport from the emac to allow me to connect from an airport enabled powerbook when it is at home.
So that all can connect at the same time and rather than getting an airport card for the mac mini, could I use the mac mini as the primary conection to the internet (via the USB modem) and then get a wirless router (eg netgear MR814) an I use a wireless router to share the USB broadband connection to the 2 airport enabled macs?
Or do I either:
1) need to get airport for the Mac Mini
or
2) Get a ethernet modem to plug into the wireless router
Any advice appreciated?
Tommy banana

How to use two versions routing in SAP on different time period?

Hi PP experts,
There is a material Material-100 linked Routing-A and Routing-B. I would like to use Material-100/Routing-A combination during period 29.04.2015-30.05.2015, and using Material-100/Routing-B combination during period 01.06.2015-31.12.9999.
Could you please kindly guide me how to do it in SAP? Thank you.
Best Regards,
Bu Fanchao

Hi Amit,
Below is my thinking, please kindly help me check.
1. Due to routing-A is existed in SAP with period 29.04.2015-31.12.9999. So I need to change the valid-to-date from 31.12.9999 to 30.05.2015 via ECM.
2. Create routing-B by CA01 with period 01.06.2015-31.12.9999.
3. Create production-version-1 with routing-A/BOM during 29.04.2015-30.05.2015. And Create production-version-2 with routing-B/BOM during 01.06.2015-31.12.9999.
My new question: Do I have to create production-version to achieve it? Does SAP system can choose routing automatically without production-version?
Best Regards,
Bu Fanchao

How can i use a second router to replace verizon fios router?

Okay so just as the title says how do i use a second router? I got a cisco valet router... I don't know how to use it because the verizon router/modem is wierd i know how to use a router if i only had a modem but fios gives router/modem so how can i use my 2nd router? The current verizon fios router/modem is b/g mode and i wanna change to b/g/n so i can get a better speed from my internet... SO how can i use my 2nd router? I tried this http://www.dslreports.com/faq/verizonfios/3.0_Networking#12506 but i don't get it can someone guide me better or make a video explaination on how to use a 2nd router? I have it connected with see as in pic i connect from my router Internet port to wan port and the ethernet lan port to the ethernet lan port on verizon fios and no work please help...

OK, so with this, we have a few options. You appear to have a MoCa connection to the ONT, hence the coaxial cable being present.
1: The ActionTec can be bridged to the Valet router. This will not require any additional cabling, however it will require a small amount of work to have working. You will also require the ActionTec still in the mix, even though it will not be acting as a router anymore with this configuration.
Visit http://www.dslreports.com/faq/16077 and look at Option 4. There is a thread linked that will allow you to set up the ActionTec as just a MoCa bridge, and will pass the Public IP to your router. You will, in order for this to work once the ActionTec is bridged, need to connect the cable from your Valet router's Internet port, to the ActionTec's LAN port and nothing else goes to the ActionTec. From this point, your Valet should run as your primary and everything should connect through your Valet. If you are adding another router, a Netgear N300, you should perform the LAN to LAN setup, which we will talk about once you've got the Valet working correctly. LAN to LAN configs require a custom setup, so do not set up the Netgear for now.
2: This is my preferred method, which would be to run an Ethernet cable to the ONT. Option 6 in the FAQ. This will require spaking to Verizon to have them move your ONT to Ethernet, but once they do this, you can disconnect the Coaxial Cable from your ActionTec router, and plug in your CAT5/CAT6 cable from the ONT to the ActionTec's Internet/WAN port. Use the ActionTec to ensure everything is working after the switchover, and once off the phone, log into the ActionTec, perform a DHCP Release, and then prompty power off the ActionTec. Once this is done, plug the CAT6 cable into your Valet router's Internet port. You should from this point, be able to connect to the Cisco, and if the DHCP Lease was broken successfully, the Cisco should begin serving up your Internet connection. If it does not, leave the Cisco powered off for a few hours to break the DHCP lease, and then power it up. If the Valet does not work, still, give the Valet a factory reset and set up this router again, with the Ethernet cable from the ONT connected to it.
I would just take a good luck at the FAQ linked above again, and see what would work the best. Easiest thing to do is to get the ONT moved to Ethernet, which allows you to eliminate the ActionTec unless you need it in the future for TV service, and also allows you to use any router with ease.
Once the Valet is up and running and holds your Public IP address from Verizon (use http://whatismyip.com/ to determine this) , and also serves up IPs to devices on your network, post back and we can help you set up the Netgear. If you have any issues while setting this up, fall back to the ActionTec. It's factory reset will work without configuration needed, regardless of you being on Coax or Ethernet.
========
The first to bring me 1Gbps Fiber for $30/m wins!

I want to set up my Epson printer using an airport and RR router. It was previously set up using a different router through HTC but same printer. How do I do this?

I want to set up my Epson printer using an Airport and RR router. The same Mac Book and printer was formerly set up using a HTC router. How do I reset computer so it communicates with printer?

http://support.apple.com/kb/HT3771
Mac 101: Printing (Mac OS X v10.6)

How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

The Guest Network function of the Time Capsule and AirPort Extreme cannot be enabled when the device is in Bridge Mode. Unfortunately, with another router...the Telus...upstream on your network, Bridge Mode is indicated as the correct setting for all other routers on the network.
If you can replace the Telus gateway with a simple modem (that performs no routing functions), you should be able to configure either the Time Capsule or the AirPort Extreme....whichever is connected to the modem....to provide a Guest Network.

Is it possible to skip the use of a router to get wireless from imac to macbook? (both osx10.5.8)

Current setup is my imac (osk 10.5.8) is plugged into my dlink router. Wife gets her connection for her macbook (aslo osx 10.5.8) wirelessly from the router.
Is it possible to skip the use of a router? That is, plug the ISP's inbound cable to my mac and somehow my wife's macbook be able to wireless connect to my iMac?
Just looking to get around the router that is a possible cause for slowness.

Some sort of router is needed for both of you to share the cable service. Is the router yours or part of the cable modem provided by the cable company? If the latter ask the cable company to service the device to be sure everything is working properly. If you have a separate modem and the router is yours, then replace it.
Why do you believe your wireless is slow?
I would also consider upgrading your computers' OS X.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s MobileMe service; fees and
           terms apply.

How to get the workcentres used in the routing out of 2 alternate routings

Dear All,
I would like to know how to get the workcentres used in the routing out of 2 alternate routings.
I referred PLKO got the Task List Type (PLNTY), Group(PLNNR), Group Counter(PLNAL), Plant(werks).
I passed this in to PLPO, The problem in PLPO is we dont have the distinguishing field Group Counter(PLNAL), so I am getting all the ARBID including both alternates.
How to get the ARBID with respect to Groupcounter 1 alone.
If a get the ARBID , I can get the ARBPL from CRHD.

HI,
Use PLAS Table also. you have to use PLKO> PLAS> PLPO.
Pass PLNNR & PLNAL in PLAS and get PLNNR & PLNKN.
Then pass these into PLPO.
work centers from CRHD
Regards,
Krishna Mohan
Edited by: Krishna Mohan N on Jan 31, 2008 12:28 PM

How To Use Your Own Router with Out Loosing Verizon's FIOS Services

How to use your own router with Verizon’s FIOS Service
First, you need a basic understanding of how FIOS works but unfortunately there are two types of FIOS systems out there. All of the systems utilize a fiber optic cable to bring TV, phone and internet to your location over one optic cable. In addition these systems provide interactivity including widgets, remote DVR, movies on demand and so forth via an IP (Internet Protocol) signal. Your STB (Set Tip Box) requires both a video and IP signal. The IP signal is necessary for all of the aforementioned interactivity. The fiber cable terminates at the Optical Network Terminal or ONT for short. The ONT converts the optics into a digital signal that can be utilized by ones equipment. From the ONT your video, phone and internet are provided to the location. This is where things can differ as the internet signal can be provided via a coaxial (MoCA or Multimedia over Coax Alliance) or RJ45 Cat5 (Ethernet) cable. It is important to identify and understand the differences of these two setups. In my case I have my internet entering via Ethernet cable, which in my humble opinion makes things a heck of a lot easier.
How does one tell the difference? In most cases it’s rather simple; just look at the Verizon’s router WAN (Wide Area Network) Port. Does it have a RJ45 (Ethernet) or Coax (TV cable Cord) going to it? If the router’s WAN port doesn’t have a coaxial connector then one will need to convert the MoCA signal into a usable Ethernet signal that routers understand. The easiest way is to use Verizon’s router as a bridge. In this method the Verizon’s router simply converts the signal and passes it along to your own router. The challenge is to try to maintain the interactivity that FIOS TV provides. Because of this one needs to supply the IP routed signal back to the FIOS router. There are multiple methods for doing this and I would recommend investigates which one make the most sense.
In my particular case the IP signal was provided by Ethernet. Again there are various ways of installing one’s own router. The hardest is to utilize Verizon’s router as a bridge. This setup requires configuring Verizon’s router as a bridge and also creating a VLAN (Virtual Local Area Networks). In addition one needs to set up their own router so it will work with the various routing tables and networks. For me this is too complex for the average person and it can be difficult to trouble shoot if something goes wrong. Please consider that Verizon will not support utilizing third party routers.
The easier method is to request an Ethernet signal (if you don’t already have one) from their ONT. I would highly recommend getting your hands on a NIM or Network Interface Module. This device is used to convert Ethernet to Coaxial so it can be fed back to your STBs. These can be purchased online and Verizon technicians can be a valuable resource with these sorts of acquisition. At the very least they can point you to the right direction. Once you have a NIM the rest is rather simple.
Log into the current Verizon Router.
Located the router’s MAC address and copy it down.
Go to the port forwarding section and copy down the Applied Rules.
Example:
Network Computer/Device: 192.168.1.100:63145
Application & Ports Forward: Application UDP Any -> 6347
Note: There may be up to three entries for each one of your Set Top Boxes.
Look at your current device list, typically found on the home screen. Copy down your STB MAC and IP address.
Example:
IP-STB1
Connection Type: Ethernet
* IP Address: 192.168.1.100
IP Address Allocation: DHCP
*MAC Address:                07:73:fFe:ad:8b:3f
* Things you will need to write down
Go to the network section and look for the main Ethernet connection. Select this and then select more setting, typically found at the bottom. Release the current lease.
Remove the Verizon router
Install your router
Connect the NIM by plugging in an Ethernet from one of the routers LAN (Local Area Network) ports to your NIM. Then connect the coax cable, the same cable that was used by Verizon router.
Set you DHCP routing IP pool to accommodate Verizon’s STB IP’s (note their IP’s start at 192.168.1.100)
Go to DHCP section and reserve the STB IP’s by inserting the IP’s and MAC addresses. This shall ensure that nothing else utilizes the same IPs as the STBs thereby preventing IP address conflict.
Add the port forwards from Step 5 above.
Clone Verizon’s Mac Address utilizing the info from step 2
Finish setting up the router in typical fashion.
Unplug and re-plugin your STB’s and test functionality. It’s best to try using a widget or Movie on demand function.
Note: if the new router can net get an internet signal contact Verizon’s support and have them release the IP and reset the ONT.
EVERYTHING should be working at this point.

3 Go to the port forwarding section and copy down the Applied Rules.
Example:
Network Computer/Device: 192.168.1.100:63145
Application & Ports Forward: Application UDP Any -> 6347
Note: There may be up to three entries for each one of your Set Top Boxes.G
Your display obviously is not like mine as mine does not dosplay the port associated with the ip address
whatever, the STB's start at 192.168.1.100 and icement by 1 for each
the port addr's will be 63145 alo incrementing by 1
there is 1 entry for each in my pf list
however each ip addr also has a port entry starting at 35000 also incrementing by 1 for each ip addr
For some unknow reason these are duplicated e.g I appear to have 11 entries exaactly the same for each stb and as the fios services rules have no action switc there is nowhere to delete the extraneous garbage.
Why do you clone the mac addr??

Download error -228 when using new Vizio router

Download error -228 using new Vizio router when trying to update plugins. It says I need to install them but when I hit install i get the error -228.

Update: still not working. I thought maybe it was an issue with this certain show (Big Love - Season 2), so I tried buying one episode of Fringe (another show I would like to get into) and the same problem continues. Finally, I bought one song to see if it was a file size/type issue, but nope. Can anyone please help me? This is really irritating... Will they still charge me for these even though I cannot download them?

Connecting to AirPlay with my AppleTV using Netgear-G router. Apple TV loses wifi connection after about 5 minutes.

I am using a new MacBook Air with OS X and just bought an Apple TV. Using Netgear-G router.
After 5 minutes of AirPlay, movies, etc from my laptop stop playing on my TV and then lose sound on the laptop (but have video on the laptop when that happens).
Just bought this tonight, pretty frustrating. Any help appreciated.

PS I've tried disabling WWM and it doesn't work. I do have a B/G only router though, do I need an N one?

Using Data-Dependent Routing in combination with Membership provider

Hi there!
Currently we have two Web applications running on azure using a single SQL database. We are experiencing problems with performance because we are using only one database. We are investigating some solutions like documentDB and elastic scale.
DocumentDb seems like a really good option for us because it looks like it can be implemented easily and we know just what to do.
With elastic scale on the other hand we have to figure out what our options are. We are using a membership provider for our users to login in one of the two applications. The other web applications does not use a membershipprovider, it does not use a login
system at all.
in the backend of our code we determine a subscription_id for both applications to retrieve tenant data.
I think we have a few options here
1. to keep using the membershipprovider we could create a database just for the login mechanism so we can determine the subscription_id, and with that subscription_id we can use Data-Dependent Routing to retrieve the correct data from the correct shard.
2. We can add extra columns to the Shard Map Manager database (i think i've read that it's not supposed to be used for user data) like username and password so we can login through this database.
Does anyone has better options than the options mentioned before and can anyone give me advise on how we should deal with these issues?
Thanks!

Elmar --
The best approach would be to maintain the Membership DB in a separate Azure SQL database. Then you could shard your transaction details across an Elastic Scale set of databases based on the subscription ID. (The Shard Map Manager
database is not designed to be extended with additional columns, and Elastic Scale works by caching that Shard Map data in the client application anyway, and those in-memory structures can't be changed).
You would use an ordinary ADO.Net connection to query membership for a Subscription ID, and then get an appropriate shard-specific connection using the Elastic Scale GetOpenConnectionForKey method, passing the subscription ID retrieved from
the membership query.

HT2463 Since I installed my new d6300 netgear my downloads on Apple TV have taken a lot longer than previously using a billion router. Do I need to do something with the net gear set up?

Since I installed my new d6300 netgear my downloads on Apple TV have taken a lot longer than previously using a billion router. Do I need to do something with the net gear set up?

Just connect the new iPod to your computer and setup the iPod via iTunes (instead of via wifi).
If you want to copy all the infor from an old iPod touch to the inew iPod see:
iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device

Iphone4s use as a router??

Similar Messages

Maybe you are looking for