IPhone5 always unable to join any network!

I have had an iPhone5 for months but it has barely ever worked on wifi! I have done ALL the suggested actions on here e.g. airplane mode on then off, forget this network, reset network, tried it on various networks (home/work/public), rebooting, etc. All I ever get is unable to join the network "...". Can anyone please help?

What security is being used on the networks you want to join?
Are you enetering the Network Password correctly? This is the most common reason for failed connections.
Have you switched on your own Wi Fi hot spot in settings? If so turn it off.
Your iPhone should be able to join virtually any Wi Fi network.
If you continue to experience issues, make a Genius Bar appointment at your nearest Apple Store and get them to check it out.

Similar Messages

  • Wi-Fi Low Connectivity - unable to join any network

    I have an Ipod touch, which was working beautifully until about 2 days ago. Wi-fi connection was great (3 bars) and there were no problems at all. Almost overnight, my wifi connectivity seems to have disappeared (now 1 bar) and any network that I had previously joined is denying me access, saying unable to join network. These are all networks (around 6 or so) that i had joined and were previously letting me join automatically. Even my home router had disowned my itouch, even though my ibook still works perfectly wirelessly. I've reset all the settings on my pod, and even wiped it once, but it doesn't seem to have made any difference. All the passwords i am entering are correct, as i've watched people using them, yet my ipod is still unable to join any network. Any ideas - i think it could be a signalling issue, as other people ipods seem to have much stronger signals, but it's beginning to seriously **** me off...

    I think that you will have no problems connecting your iPods at the Apple store. But it is good idea that you can get them checked out.
    Back to your home network. AT&T u-verse routers are somewhat problematic but I did dig up this article on connecting a touch to the router:
    http://utalk.att.com/utalk/board/message?board.id=HSIA&message.id=9757
    From what I can tell, this router only uses WEP encryption and you would log on via the number on the name plate of the router as your password.
    The other thing is that ATT has had serious DNS problems across the country. On your touch you would most likely get a message that the "server was not responding" and on your MacBook, web surfing would just put you to sleep. I have a feeling that is what was going on when you came home and neither iPod would work.
    There is a fix for the DNS problem - use OpenDNS.

  • TS1398 Can't join wireless network.  Get message saying "unable to join the network".  My wife's phone is connected so problem must be my phone - any ideas?

    When trying to access my wireless network, get a message "unable to join the network".  I tried turning everything off and back on, reset phone, etc. (all of the suggestions under troubleshooting guide).  It was working until last night - it suddenly wasn't on anymore and then I couldn't get back on.  Any suggestions?

    1- try updating your phone (If you can)
    2- try reebooting
    3- (I know this sounds crazy but) put it in the freezer for a few hours.

  • HT1695 unable to join any wifi network

    I am unable to join any wifi networks. Wifi is on, but the dial next to "choosing network" keeps spinning!! I can't access any wifi.

    iOS: Wi-Fi or Bluetooth settings grayed out or dim

  • HT4623 Hi having difficulty connecting to wifi following upgrade to 7.0.4 for an iPad 4.  Have done a complete power down and restart , no luck.  Unable to enter a password to the home locked wifi. Message coming back Unable to join the network ".........

    Just installed iOS 7.0.4 on the ipad, and can no longer connect to my home locked wifi.  I choose the home wifi network and the message comes back with   Unable to join the network "............"    Dismiss.  There is no prompt for the password for the locked network. . . .  Any suggestions  . . . . .

    1. Turn router off for 30 seconds and on again
    2. Settings>General>Reset>Reset Network Settings

  • New iPod Unable to join the network after inputting password

    Got my iPod this am..
    looked too good to touch no pun intended.
    I went through the instructions, interrupted with an offer to update_, which I did.
    I then saw that the iPod was off line and went to set up the connection.
    I do have a Time Capsule but I just use it as an external drive, I use Ethernet connections between it my Netopia router/modem which provides my Wi Fi for another computer.
    I have a WPA-PSK security on the Netopia.
    My Wi Fi shows up on available networks, I am asked for my password but then I get a message "Unable to join the network"
    I must admit that my password is long (and a bit racy) my fingers a bit big, but I know that I have got it right on at least a few occasions.
    I have tried entering the details on "Other network" with the same result.
    Could my WPA-PSK be a problem?
    I would be most grateful for any suggestions.
    Various forms of this problem have appeared on this forum, but I think mine is a bit different.
    Thank you.

    Thank you.
    Went through that pretty well.
    Finally solved it in 2 steps.
    1. reset my modem/router to factory settings.
    Odd situation, wireless settings, but dependent on ethernet connection.
    2. read a post from Hong Kong re strange network settings.
    On his advice, into network, changed location from Automatic to one of my choosing.
    Bingo! everything came good.
    Totally wireless connection. iPod jumped to it. Isn't it great when everything comes together?
    I still wonder why it didn't take the signal from the WiFi part of my Modem/Router?
    Probably just as well as it sorted my Time Capsule connections out, probably for the first time since I bought one back in early 2008, and its recent replacement when it joined the epidemic of sudden death recently.
    Cheers

  • I just returned from Europe and my ipad will not connect to my home WiFi. It keeps giving me the message ""unable to join the network "Pepper".  This is my known home network.

    I just returned from Europe and my ipad will not join my home WiFi network.  It keeps giving me the message "Unable to join the network"  Any ideas?
    I turned off my airplane mode.

    "That was Easy!"  Thanks!

  • IPhone 5 wi-fi "unable to join the network"

    My new iPhone 5 is my first iPhone and I've had it about a week.  I'm still in the process of setting it up but cannot connect to my home (secured) wi-fi.  I've been reading other Apple forums and Google suggestions and it appears this is a known Apple issue?  My phone came with iOS 6 installed so I have no update available.  I've turned off my router and shut off my phone, rebooting both but I still get an error message when entering our wi-fi password:  "unable to join the network".  I've turned off cellular and re-tried wi-fi to no avail.  I am NOT impressed with my first Apple product.  What a hassle.  Does anyone have any other suggestions to try or am I stuck waiting months for an Apple fix?

    There are a couple of things that you can try. First, try disabling the security on your wifi network and see if the phone will connect. Check the type of security you are using. Some have reported the iPhone reacts differently to some wifi security. Check to see if there is a firmware update to the router. This is usually the biggest culprit of the bunch. Once routers have been updated and restarted, troubles disappear.

  • Unable to Join the network ...

    I've seen similar posts with the same title but none of these solutions work for me. The problem is that I can not connect to my home Wi-Fi network. Following are the details:
    - I have a new iPod Touch with OS 2.2.1
    - My wireless router is an Airport Extreme running 7.4.2
    - My wireless security is WPA2 Personal
    - I have no problem connecting other devices such as Mac laptops and desktops so I know the correct password and the usual settings
    - I have also been able to connect my Touch to another wireless network with WPA2 security! This leaves me to believe there must be some incompatible setting on my Airport Extreme.
    - I have gone through the various trouble-shooting steps on Apple's support site, to no avail. I have reset both the Touch and the Airport many times
    - The Touch can see my network but when I enter the (correct) password I get the error "Unable to Join the Network ..."
    Any help would be appreciated! I can certainly take my Touch to my local genius bar, but that won't help if the problem is with my Apple wireless router.

    If you can see your network, then you are at least not making the same mistake as many AE users - leaving the router broadcasting in N mode only.
    Are you using anything like MAC address filtering on your network? Is DHCP on? The easiest thing you can try is a) reset the touch network settings; b) log back into your network using Settings > WiFi > Other network and re-entering your network name (case sensitive), security, and password (also case sensitive).
    Try that and let us know what happens.

  • Unable to join Airport Network

    I am being baffled by a network problem.
    I have 2 Macs, a MBP 17 inch running Snow Leopard and an old Powerbook G4 running 10.4. Both connect to a no security (ie no password wireless) network at home. "Suddenly" the MBP will not join the wireless network (A DSL model D-Link). Error message when running diagnostics of "Unable to join Airport network.....". The G4 works just fine.
    Have tried rebooting both devices ie the MBP and the D-Link. The MBP will work fine with a cable attached to the D-Link but not wirelessly!
    Also, the MBP can see the Powerbook in the FINDER under "Shared".
    Any ideas?
    Thanks
    BF

    Yeah, thanks Bob, I got my MBP Safari to talk to D-Link via the http://10.1.1.1 address, put in a WEP password. Saved the changes and restarted the router. When I connect via Airport it asks for a password - I type it in then it times out. Then I went to the Powerbook and the Vista machine and they connected fine. I used my iphone and told it the password and it also worked fine.
    I prefixed it on my MBP with $ and without $ - all to no avail. I am starting to think maybe the MBP wants a WPA password for some reason. It worked fine until last night! Very strange indeed. Any more ideas?
    What gets me is that one moment it works and the next it is dead as a dodo...

  • Unable to join WiFI network

    Can anyone help? EDGE is working fine for me, but I want to go a bit faster when I an at Home and connect to my mac's airport. Do I have to have a airport base station to accomplish this? My IPhone is reconizing my mac, but I keep getting "unable to join the network 'myname's iMAC G5'". I am getting a strong signal (from the airport drop-down menu) and I have "use interference robustness" turned on, but still unable to connect. Any advice? Thanks

    Allan is right, if your iMac G5 is sharing it's network connection, that is what the iphone is picking up.
    If this is the case, on your iMac, try going into your system preferences > sharing and turn off internet sharing.
    Then power off your iphone and power cycle your airport. Then turn your iphone back on and check to see if the iphone sees your airport network.
    If it does not see your network, the airport might not be broadcasting the network name. This can be set up for security reasons.
    Go into settings > wi-fi and choose other. This will allow you to put in the name and password of your network.

  • I have a new iPad 2 which will not connect to my wi fi despite a new router being installed. When I tap my network name (which is with TalkTalk) the message comes up "unable to join the network TalkTalk etc...)

    I have a new Apple iPad2 which will not connect to my wi fi despite a new router.  When I tap the correct address it comes up with the message "Unable to join the network TalkTalketc... It does connect in other peoples' houses . Am I right in thinking that the trouble is with TalkTalk?

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Ipod wont connect to wifi, says "unable to join the network"

    my ipod touch wont allow me to join my home wifi network, tells me "unable to join the network"

    Does the iOS device connect to other networks?
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network       
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • I have an iPad 2 v6.1.3 that has a problem with connecting to wi-fi.  My other I macs have no problem with connecting.  The pad keeps coming up with unable to join the network. Nothing has changed with passwords--it just refuses to join my secure network.

    My other Imacs and my wife's Ipad 3 have no problem with conneccting.  My Ipad keeps coming up with unable to join the network.  Nothing has changed with passwords--it just refuses to join my secure network.  A couple minutes ago, it connected for 10 seconds, then dropped the connection.  Is there a way to reconfigure the Ipad to fix this major problem, as we dropped our carrier (saved a bunch of money) and just went wifi.
    Thanks so much for any help with resolving my connection problem.
    Gary

    Hello jaxgaryj,
    The following article provides a number of potential resolutions for your WiFi issues.
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS1398
    Cheers,
    Allen

  • Unable to join the network on iPhone 5

    My phone was using IOS 6.0 when this first started happening. I was able to join a public network (i.e. church, hotel). It connected the first time without problems. Then another time later I was unable to. I got the "unable to join the network" message. The phone can see the network.
    I've tried several attempts. Tried the following:
    - forget network (does not give this option anymore)
    - turning wifi on and off
    - reset network settings
    - resetting the phone by holding the buttons for 10 seconds
    I am able to connect to my home wifi without any problems and my work wifi, and possibly others.
    My wifes phone is identical to mine and she is able to connect to the church's wifi.
    I even tried the update to IOS 6.1 - same result.
    Since these are public routers, I don't have the option to reset their hardware.
    Suggestions?

    Take it back and have it replaced as it is a hardware problem. I had the same problem with my iPhone 5 bought in July 2013 direct from the Apple Store and went thro hundreds of blogs to try & fix it but had no luck whatsoever. The only way I got it to work was to turn off the security on my router. This wasn't a viable option long term as well as the majority of other places that offer Wifi also use secure wif networks. There appears to be a problem with some batch of iphone 5's ( as per research online) not accepting the WPA 2 personal security settings due to a faulty chip or antenna using the 2.4GHz settings? Quality control must be a problem in their production line?
    Also if you switch to the 5Ghz settings on the router this seemed to work for me but then my daughters couldn't use their iPhone 4s wifi as they don't support the 5Ghz range. Book an appointment to see a Genius at the Apple store and get them to replace it if it is still new and in warranty. I expalined the problem that it would not work on a secure network even though it would work in the Apple Store as it they have unsecured wifi network in store. They agreed to replace it and my new iPhone 5 works fine at home on the same router / Wifi WPA 2 Personal setting that the original didn't!
    Save yourself the massive headache and just get it replaced as glad I did!

Maybe you are looking for

  • Manually deploy custom taskflow war

    Hi Everyone, Is it possible to deploy a custom taskflow war to webspace server using the admin console of the weblogic server? Using jdev 11.1.1.5 and latest version of webspaces. System admins will not allow us to use the ant deployment from jdevelo

  • Problems loading search engines

    I can't access the google.com homepage or www.bing.com. When I enter the address firefox constantly tries to load the site and never does, happens with others broswers as well.

  • All my purchases are deleted!?!? HELP!?!?

    Hello, I recently was syncing my iPhone with my computer, and we have purchased many songs. Not to mention it all adds up. For some reason, and I don't know why, I went on iTunes to sync my iPhone with the computer, and all my songs were GONE! All of

  • Best workflow for colour grading in CS5.5

    What is the best workflow for colour grading in Premiere Pro CS5.5? I don't like the 3 way colour grader in Premire I like to use Levels and Curves, so I normaly use Color Finese 3 LE in After Effects but it's hard to export an entire timeline to AE

  • Anyone else find Flex unusably bad?

    I love the concept of the flex tool, but so help me I can't make an edit in a vocal without causing a pop or horrible phasing. This is in monophonic mode. Anyone have any hints as to how to make tolerably good-sounding edits with this tool? Thanks -