Iphone5 failed to enter in stand by mode ocasionaly.

My new I phone5 failed to enter in stand by mode from time to time and I need to do this manualy by pressing the sleep button. Some one occur same issue? The phone is set to enter in stand by mode after 1 minute but he done this only sometimes.

Are you using 100GB of RAM? If yes, then I guess it must be slow, as it need to copy 100GB of RAM image into HDD. So... am I missing something?? Yes, your system spec please ---> moan guide <--- read it
Quote from: MartyLK on 11-March-07, 09:53:10
I have a couple problems with my new P6N SLI-FI build.
1. When I power it down into Hibernation it takes a very long time to do so. about a minute.
2. When I put it into Stand-By mode the CPU fan remains active...and possibly the PSU fan as well. The DVD drive light stays on and I am able to open the drive by pressing the button.
Is there something in the BIOS that needs configuring?
Thanks

Similar Messages

  • AP log got Connection lost to WLCCP server, changing to Stand-Alone Mod

    Our customer has about 200 Autonomous APs(Version=c1200-k9w7-tar.123-2.JA2),WLSM(Maintenance img(1.1(2)),Application img=12.2(15)XR2), Sup720 IOS=s72033-jk9o3sv-mz.122-18.SXD3.bin.The static WDS point to WLSM,somme of AP will fail with log"Connection lost to WLCCP server, changing to Stand-Alone Mode".
    Any ideas about solutions on this?

    You will receive this error message if the AP loses its connectivity with the WDS. This can happen if the radios are flapping, as well as if there are problems with authentication / registration with WDS. If the AP is powered using POE, please ensure that you configure the proper poe support on them. Also check if authentication is happening correctly. Debugs on the AP and the logs on the AAA server will help troubleshoot this issue.

  • 11GR2 2nodes CRSD ASM - Failed to open file in dirty mode

    Hi...
    we facing a problem with a two node 11gr2 cluster.
    Independently first started node one ore node two. The node that has start first starts normal.
    The second started node fail with error mess ......
    vi .../emcrsp.log
    2011-04-17 10:19:14.406: [  OCRASM][4090540208]ASM Error Stack : ORA-15077: could not locate ASM instance serving a required diskgroup
    2011-04-17 10:19:14.408: [  OCRASM][4090540208]proprasmo: kgfoCheckMount returned [7]
    2011-04-17 10:19:14.408: [  OCRASM][4090540208]proprasmo: The ASM instance is down
    2011-04-17 10:19:14.416: [  OCRRAW][4090540208]proprioo: Failed to open [+DGCONF]. Returned proprasmo() with [26]. Marking location as UNAVAILABLE.
    2011-04-17 10:19:14.416: [  OCRRAW][4090540208]proprioo: No OCR/OLR devices are usable
    2011-04-17 10:19:14.416: [  OCRASM][4090540208]proprasmcl: asmhandle is NULL
    2011-04-17 10:19:14.416: [  OCRRAW][4090540208]proprinit: Could not open raw device
    2011-04-17 10:19:14.416: [  OCRASM][4090540208]proprasmcl: asmhandle is NULL
    2011-04-17 10:19:14.416: [ default][4090540208]a_init:7!: Backend init unsuccessful : [26]
    [   CLWAL][738463920]clsw_Initialize: OLR initlevel [30000]
    2011-04-17 10:19:15.272: [  OCRASM][3128352944]proprasmo: Failed to open file in dirty mode
    2011-04-17 10:19:15.272: [  OCRASM][3128352944]proprasmo: Error in open/create file in dg [DGCONF]
    [  OCRASM][3128352944]SLOS : SLOS: cat=8, opn=kgfolclcpi1, dep=402, loc=kgfokge
    The interlink is up and running.
    We try to recreate the OCR and Voting from daily backup without any result
    Does anyone has an idea ?
    Thanks *T
    Edited by: tbrinkmann on Apr 20, 2011 5:15 AM

    Hi Paul,
    yes the ASM is down.
    That was confusing me. If I shutdown the other node the +ASM can start and clustering com´s up normal.
    It looks like only one node can use voting or ocr....
    The behavior looks like the interlink is down buts is not ;:-(
    One node ( first com´s up) start normally and take all cluster resources ...scan .. the vips..
    And second node show this error mess..
    Thanks
    *T                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • Changing Default Print Quality for Photosmart Printers in Stand Alone mode

    Hello Everyone. I am using a group of Photosmart Printers in Stand Alone mode for events where I shoot and print on site. Although I have quite a few printers with me (6 total at a time), I prefer to have the printers print in "Normal" Print Quality Mode, instead of "Best". Images come out twice as fast, and because I have a disciplined shooting technique, I get "GREAT" results from the "Normal" setting. I and/or my assistant have to go to my "Preferences" to change my Print Quality everytime we prepare to print another batch of photos. Sometimes we have groups that will want 5 copies, and it simply takes FOREVER in Best mode, and really, although with a 5x Loupe I can tell the difference, My customers can't with their naked eye. Sometimes we forget to change the setting due to the pressure of the pace sometimes. OOPS!
    I am using the following Photosmart Printers: A516, A512v and the 335.
    As I stated, I don't use these with a computer, I drive them straight from CF Cards. I do have all the original software, if I need to use the computer to make some changes. Just tell me how. Manual says nothing about getting the setting to default to normal.
    Thank you so very much in advance.
    BLAYZE!

    Hello:
    One way of assuring high quality would be to export the photo to the desktop (at highest quality) and then print from there.
    In my own case, I find that when I occasionally print a photo from iPhoto, the quality is quite good.
    Barry

  • After stand-by mode screen turns green or the graphics get messy - Satellite M100-165

    When i leave my laptop for more than 20 minutes on stand by mode and i try to activate it again the screen turns green or the graphics get messy.
    In order to work i have to reset and turn on again. Does anybody know what can i do about this issue?
    Thanks in advance.

    Very strange your description.
    Did you try to update the BIOS or the graphic card driver?
    If not so please check the available versions on the Toshiba driver page and if these applications are newer so try to upgrade it.

  • Satellite Pro 6100, WXP installing SP2, after stand-by mode the USB is unknown

    Hi,
    after installing the update SP2 for Win XP on my notebook Toshiba Sat. Pro 6100, the following happens:
    when the notebook awakes from the stand-by mode, the USB connector is unknown and the communication is lost.
    Who knows the answer for this problem?

    Hello Erjee,
    you just need to install the bios version 1.90 or later.
    For other machines with the same problem after installing SP2...
    TE2100 v1.60 or later
    SATELLITE PRO 6000 v1.60 or later
    PORTEGE 4000 v2.10 or later
    TECRA 9000 v1.40 or later

  • Can I put my Motorola cable into stand-by mode?

    It's a silly question, but I just want to be sure.
    While I had the cable modem connetced to my PC, I was able to put it into stand-by mode after I shut-down the computer; now that the modem is connected to the Airport Extreme, I wonder if the router will respond to it after I bring it out of stand-by mode. I had a hard enough time getting the darn router to work in the first place, so I'm a little leery about doing anything that could interrupt service.
    It might be worth mentioning that my PC is picking up the signal through a USB antenna. but it might not be, either.
    In any case, I would appreciate any help offered; the quicker the better too, for my roomie wants to shut off the modem ASAP because it's bothering her -- it doesn't help that she doesn't have a life.
    Macbook   Mac OS X (10.4.9)  

    Pale_face wrote:
    When I unplug it, how long do I leave it unplugged for?
    Until you see the battery capacity is under 20%. Anyway, OS X will tell you when you should charge your MacBook. Don't let it run out of power.
    Pale_face wrote:
    And is the 'battery life' the 1000 cycle charge?
    In new computers, batteries should have 80% of capacity after 1000 cycles, so that's what I'm referring with battery life. See > http://support.apple.com/kb/HT1519 OS X will tell you when the battery has to be replaced

  • My iPod nano 6G stop working suddenly; After i reset it and even afetr put it in "stand by" mode by accessing deagnostic mode, it is still not working; Now i can access it sometimes (the main screen), but is not playing and is too slow. How can i fix it

    My iPod nano 6G stop working suddenly; After i reset it and even afetr put it in "stand by" mode by accessing deagnostic mode, it is still not working; Now i can access it sometimes (the main screen), but is not playing and is too slow. How can i fix it

    If you do not find a solution in the iPod nano (6th generation) - User Guide, suggest that you call AppleCare if still under warranty or take a trip to your local Apple Store or AASP.

  • I am unable to update my apps on my iphone5s. After entering the applied password, the update button reappears and nothing happens. Can anyone help? Thanks

    I am unable to update my apps on my iphone5s. After entering the applied password, the update button reappears and nothing happens. Can anyone help? Thanks

    Hey there Tonyaokb,
    It sounds like you are trying to update some of your apps and when you tap the update button, the update does not happen. I recommend starting by closing the running apps on the phone:
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    Double-click the Home button.
    Swipe left or right until you have located the app you wish to close.
    Swipe the app up to close it.
    When you have done that, sign out of your iTunes account in Settings > iTunes and App Stores, and restart the phone and try to update them again:
    iOS: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/ht1430
    If the issue persists I would next verify that you can find it in your purchased history with ths article:
    Tap App Store.
    Make sure you're signed in with the same Apple ID used for the original purchase.
    Tap Updates.
    Tap Purchased on the resulting screen.
    So that you can then delete the app and re install it:
    Reinstall the affected app
    Remove the app from your device and reinstall it:
    Tap and hold any app icon on the Home Screen until the icons start to wiggle and show a small "x" in the top-left corner of the app.
    Tap the "x" in the corner of the app you want to delete.
    Tap Delete to remove the app and all of its data from your device.
    Press the Home button.
    Go to the App Store.
    Search for the app and download it again.
    Note: If it's a paid app, make sure you're using the iTunes account you purchased the app with originally. If it isn't, you may be asked to purchase the app again. Learn more about downloading previously purchased items.
    From: iOS: Troubleshooting apps purchased from the App Store
              http://support.apple.com/kb/ts1702
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • Auto-light on of LCD of X2-01 in stand by mode

    My Nokia X2-01 automatically light on frequently in stand by mode.I've done hard reset,but it have not solve the problem.I've also kept the mobile in stand by mode without any SIM card inserted..but the same problem occured.
    What do u advice me?

    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".

  • How may I put in stand-by mode the monitor of my PC by VI command execution?

    SO win98 P200 MMX; I need to put monitor in stand-by mode by VI command and restore the active state after some operation in order to low monitor noise on acquisition instrumentation.

    Hello Stefano,
    In theory you should be able to do this. What you will have to do is find out which contains the function to put the monitor into stand-by. I am guessing that would be in the driver for the video card or it could possibly be in the windows system dll.
    Once you locate the correct library then you can use the call library function in LV. There is a good link to a walk through here on the dzone, just type 'external code' in to the search.
    I hope this helps,
    Doug

  • Have Many Calendar Entries in the stand By Mode

    Hi there,
    Very glad to have purchase the N70. However despite the fact that I have many entries into the calendar itself.
    When I am on the stand by mode, I do see only the next appoitment that I have.
    Will it be possible to see more appointments into the Stand By Mode??????
    It will permit to see at least a full day/full week of activity?
    Do you know how to do it??
    THANKS A LOT.

    I think there's a 3rd party application that does something similar to what you want.
    As far as I'm aware, it does it all automatically, and there's no way to change it - it will only show you todays notes, and if you've nothing on today, it will show you the next set of dates. I've found it a bit annoying too, but I'm not too bothered.Message Edited by richcowell on 28-Apr-2006
    03:57 PM
    Nokia History: 3110, 5110, 7110, 7110, 3510i, 6210, 6310i, 5210, 6100, 6610, 7250, 7250i, 6650, 6230, 6230i, 6260, N70, N70, 5300, N95, N95, E71, E72
    Android History: HTC Desire, SE Xperia Arc, HTC Sensation, Sensation XE, One X+, Google Nexus 5

  • Fail to enter bootcamp win7 after replacing CD-Ron with SSD

    I replaced CD-Ron with SSD.
    I successfully enter mac on both HD and SSD, failed with enter win7 on HD.
    It stops at black screen and a write bar shining on the corner.
    Is it because the windows system can't find my CD-Ron?Then how?
    Tks. ^^

    So I try booting without the DVD player attached, and there is no Windows option or startup item.
    I try booting with the DVD plugged in, but without the USB attached, and I get the Windows DVD to show as a start up option: I click it and it sits with a black screen and the blinking prompt.
    I am seriously at a loss here folks.  What the heck.
    The machine sees the DVD.
    It does not see or acknowledge the USB stick as anything past the BOOTCAMP function of putting files on it, but nothing happens with it past that.
    Am I missing something in BootCamp?  Am I missing an option?
    Cello?
    *** Report for internal hard disk ***
    Current GPT partition table:
    #      Start LBA      End LBA  Type
    1             40       409639  EFI System (FAT)
    2         409640    975835479  Unknown
    3      975835480    977105023  Mac OS X Boot
    Current MBR partition table:
    # A    Start LBA      End LBA  Type
    1              1    977105059  ee  EFI Protective
    MBR contents:
    Boot Code: None
    Partition at LBA 40:
    Boot Code: None (Non-system disk message)
    File System: FAT32
    Listed in GPT as partition 1, type EFI System (FAT)
    Partition at LBA 409640:
    Boot Code: None
    File System: HFS Extended (HFS+)
    Listed in GPT as partition 2, type Unknown
    Partition at LBA 975835480:
    Boot Code: None
    File System: HFS Extended (HFS+)
    Listed in GPT as partition 3, type Mac OS X Boot

  • Firefox makes my computer go on stand by mode automaticly

    i dont know if its my computer or browser but when sometimes i use firefox it goes into stand by mode automaticly without me going to the shut down menu....im not sure rather thats suppose to happen or not.....i done a virus scan and it was no virus results

    Eiii, things are working now. I did some fiddeling in the Bios - Power Management feature.
    I just wonder why the BIOS defaults works this way now. Different than the "old" board.
    Arne Borg

  • "Hibernate" or "Stands by" mode hangs when resuming - Tecra M1

    Hello,
    My Tecra M1 its blocking when resuming, after hibernate or stand by mode...
    I've enough free disk space (plus than 2 GB).
    Any suggestion concerning this matter?
    Many thanks in advance,

    Hi
    I really dont believe that this occurs because of free space on the HDD. In my opinion it can be because of some open applications. I use Tecra M1 almost two years and use hibernation mode almost every day. Till now I didnt have any serious problems with it.
    Sometimes the wake up takes a longer time but that is all.
    Is there the same situation if you close all applications and use both modes with just running operating system?

Maybe you are looking for