Iphone5 is locked with reset, cannot re-open

Phone5 locked with reset. Passwrod will not work. Finger print will not work. What is the over-ride code or proceedures?

Well, here is the solution to my own problem. I give it to you in case you get the same problem one day.
The solution is as simple as impossible to find on your own: launch Bridge before launching Encore! Yes, that's it. If Bridge is running when you start Encore and open your project, it all works just fine.
In my case, the project was a bit damaged as many files where not located properly. I just hit the "Skip all" button when prompted and got into my project. Then I re-assigned each unfound file (in italic) with the original one. That was quite easy in the end.
I find it incredible that Encore will work only when Bridge is launched. In that case, I can only recommend to have plenty of RAM. In all cases it is a nasty bug.
I hope it will help someone some day.
Cheers.

Similar Messages

  • Screen Locked with box "Cannot Access Find My Friends"

    This has never happened...when I try to go on my iPad there is a box that says "cannot access find my friends" with 2 buttons "later" or "open". When I select either of those nothing happens.  I have tried shutting down and it won't let me select to power down.  I have asked Siri all sorts of questions and commands which she answers and follows.  When I ask her to go to the find my friends app it displays a white screen.  I never even use this app.  Here is a pic of what it looks like.

    Try a device reset:
    Device Reset (won't affect settings/data/music/apps/etc)
    1. Press and hold (& continue to hold) BOTH the Sleep/Wake button & the Home button.
    2. Continue to hold BOTH (ignoring any other messages that may show) until you see the Apple logo on the screen.
    3. Release BOTH buttons when you see the Apple logo and allow the device to boot normally.
    Afterwards, enter multitasking and close off the Find My Friends app as it may be running and throwing this message. It appears you are likely on iOS 6.x so I'll include the procedure to close off the app for that iOS as it's different than iOS 7 and above:
    Double-tap Home, press and hold one of the running app's icons (in your case, Find My Friends) until it wiggles, press the red - on the icon to close the app. Do this for all of the apps you want closed.
    Note that a similar pop-up message stating something like "This iPad had not been backed up for xxx amount of time" has also been know to appear with similar symptoms as this message. The only way to clear the message is with a device reset as mentioned above. Apple needs to address (at least) this "no backed up" message issue as it can prevent one from using their device unless they know of the reset.

  • ICal backed up with Leopard cannot be open with Snow Leopard!!!!

    I cloned my MacBook Pro HD to an external one while using OSX 10.5. After upgrading to Snow Leopard 10.6.1 when I try to open iCal on the external HD there is a message saying "You can't use this version of the application iCal.app with this version of Mac OS X. You have iCal.app 3.0.8".
    In fact, the external HD version of iCal is 3.0.7.
    With the upgrade to SL the version changed to 4.0.
    The same thing occurs trying to open Mail; it tells me the external HD version is 3.6, while the SL version is 4.1
    Apple support told me that in fact this is the way it is supposed to work!!!! So am I totally stuck? Is the clone totally worthless?
    Has Apple ever been this "intelligent" before?? How many other "improvements" have they made?
    Can anybody help me?

    AFDT wrote:
    I cloned my MacBook Pro HD to an external one while using OSX 10.5. After upgrading to Snow Leopard 10.6.1 when I try to open iCal on the external HD there is a message saying "You can't use this version of the application iCal.app with this version of Mac OS X. You have iCal.app 3.0.8".
    So why are you trying to run an application from a clone of Leopard while started up from Snow Leopard? If you start up from the clone, you will be running Leopard & all the Leopard versions of the apps will run just fine. If you start up from Snow Leopard, all the Snow Leopard versions of the apps will run just fine.

  • CD/dvd DRIVE locks up and cannot eject/open at all

    anyone know on how to fix this issue with a Notepad dvd/cd writable drive-laptop it is out of warranty- on startup the power LED's light shows green for a few seconds and will eject upon startup if pressed-but once closed and Windows vista is loaded, the cd/dvd drive completely locks up-no power green light displays. and will not allow to eject at all
    it is shown in my computer ok.
    i tested reseating the ide cable for the cd/dvd drive -but still same problem. (ran a scan disk as well)
    appreciate any advice
    Thanks
    Finbarr

    Have your parents try a disk with their account. If it works there, then it's something about your account causing the problem.

  • Iphone 5s become locked with 02

    My iphone 5 has become locked with O2. When I contacted O2, they told me that I can't use my three sim in, they told me that iphone5s become locked with the O2 sim, when I told them that I would like to unlock it, they said that apple haven't issued it yet! what can I do?

    Nothing
    Apple retail stores and Apple On-line UK are the only source
    of unlocked iPhones inc iP5 in UK
    All others are locked to a carrier
    O2 generally offer unlocking 6-12 months after release of a model
    might be longer with iP5 as they cannot offer LTE and
    may wish to prevent movement to EE who will have LTE spectrum
    Unlocking is nothing to do with Apple
    Carriers lock the iPhone only they can unlock it

  • When I go into bookmarks and click on a, the screen shows what appears to be a compass with a lock overlay, on a black background. At the bottom the address/url are shown. Theses cannot be opened. Other bookmarks have the black background and compass, but

    When I go into bookmarks and click on a site, the screen shows what appears to be a compass with a lock overlay, on a black background. At the bottom the address/url are shown. Theses cannot be opened. Other bookmarks have the black background and compass, but no lock. These can be opened by clicking on the compass. What is wrong?

    Thanks to the-edmeister and cor-el, for speed of response. I had not inadvertently moved the Bookmarks-Toolbar : I was confronted with the situation right after Firefox 9 had installed and unfolded in front of me. At first, the toolbar area looked reassuringly familiar, but when I started normal work, I discovered the lack of tabs and the only reference I could see to TABS was a tiny button inviting me to group tabs (which was unhelpful to say the least, filling up the screen with tiny unreadable windows). Sure, there were tabs forming, but they were invisible, unless I used the group button. Eventually, I was brave enough to use "reset toolbars" and the tabs came back in the way I want them, but it was a traumatic 2-3 hours out of my life. I kept on "adding a new toolbar" to see if I could make use of it; I kept giving them names, but it is impossible to see where the new tool bar is! (the toolbars don't have a little bit to grab at one end). In my opinion, Firefox should not have allowed the Tab Bar and the Bookmarks Toolbar to become caught up with each other - they have completely different functions. I don't think I would like to play around with "Make a new profile"! I was so desperate that I have already downloaded version 3.6 again, ready to install, for if I was unable to resolve the version 9 problems above.

  • HT1212 i have locked my ipad cannot access how do i reset, i have not  synced my device with iTune

    i have locked my ipad cannot access how do i reset, i have not  synced my device with iTune

    Forgotten passcode (you can restore the iPad youself)
    http://support.apple.com/kb/HT1212

  • Set computer to lock with password in 5 seconds. now cannot open in time because of the 5 second shutdown. What can I do to now get into my computer??

    Set computer to lock with password in 5 seconds. now cannot open in time because of the 5 second shutdown. What can I do to now get into my computer??

    I'm not sure which option you set.  Requiring the password after 5 seconds in System Preferences > Security only kicks in after the sleep or screen saver.  The smallest option for sleep or screen saver is 1 minute.
    Which options did you set?

  • My iPhone5 was locked Telnor in Norway 1 year. I send phone to be repaired. Thei give me a new phone with other IMEI number without telling me. Ichanged to a new operator after 1 year. They could not open because of new IMEI number.

    My iPhone5 was locked at Telnor in Norway for 1 year. I send iphone to be repaired. Thei give me a new phone with other IMEI number without telling me. Ichanged to a new operator after 1 year. I asked the old operator to unlock my phone, but thei could not do that because i have a new iphone with new IMEI number. What must i do to get this fixed? Magne

    Any replacement device is going to have a new IMEI. You need to contact whomever replaced your device (Apple or Authorized Apple Service Provider) and work through them and your carrier. You should have some paperwork from the replacement to show the carrier.

  • My iPhone 5 having a problem that I can open my lock screen but I cannot slide open my phone even Slide to power off too, It just cannot slide.

    My iPhone 5 having a problem that I can open my lock screen but I cannot slide open my phone even Slide to power off too, It just cannot slide.

    Hello MarvanCheong,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iPhone, iPad, iPod touch: Troubleshooting touchscreen response
    http://support.apple.com/kb/ts1827
    Restart your device
    Hold the On/Off button until "slide to power off" appears. Slide to power off your device. When it is off, press the On/Off button to turn it back on.
    If you can't restart your device, reset it by pressing and holding the Sleep/Wake button and the Home button at the same time for a least ten seconds, until the Apple logo appears.
    Clean the screen with a soft, slightly damp, lint-free cloth.
    Avoid using the device while wearing gloves, with wet hands, or immediately after applying hand lotion.
    If you have a protective case, or if you are using a plastic sheet or film on the display, try removing them and testing the device without it.
    Best of luck,
    Mario

  • "Photos in the Camera Roll of "(your) iPhone" cannot be imported because the device is locked with a passcode.  You must unlock the device to import them."  My iPhone 5 running the latest iOS 7.1 and I'm using iPhoto '11 v 9.4.3

    "Photos in the Camera Roll of "(your) iPhone" cannot be imported because the device is locked with a passcode.  You must unlock the device to import them."  That's the new error message when I plug in my iPhone 5 running the latest iOS 7.1 into the MacBook Pro running iPhoto '11 v.9.4.3.  My Mac OSX is still 10.8.5.
    So, I unlock the iPhone by entering the "passcode" before I plug it into the MBP and still iPhoto does nothing.  At least it doesn't issue the error message above.
    I've checked both iPhoto preferences and those for Photos and Camera in the Settings on the iPhone.  There doesn't seem to be anything to change this lack of connectivity.
    What next please?

    An hour-long phone discussion with Apple Support yesterday solved this question and sorted a couple of others.
    As for this one, do not ignore any messages which pop up when you plug in your iPhone and ask "Trust this computer?".  The correct reply is "Yes", not "Cancel".
    OK, you cancelled like I did, thinking "What on earth is this for?".  Mistake.  You can force the issue by having iTunes open when you next plug in your iPhone.  Tell the iPhone that it can trust its old friend, your computer and voila!  Your photos can download into iPhoto again.
    Thank you, Jay with Apple Sydney, Australia!

  • Ipad is disabled connect to itunes but i connected it and there was a popup saying itunes cannot connect to ipad because it is locked with a passcode. You mus enter the passcode on the ipad before it can be used with itunes. but i couldnt enter my passwor

    my ipad is disabled and it said ipad is disabled connect to itunes but i connected it and was restoreing it and then there was a popup and it said itunes cannot connect to ipad because it is locked with a passcode. and you must enter the passcode on the ipad before it can be used with itunes. But i couldnt even write the passcode on my ipad cause it was disabled. What should i do now????

    Follow the instructions on this page to reset your iPad : http://support.apple.com/kb/HT1212
    Note: If iTunes asks you to enter the passcode, try another computer that you have synced with. Otherwise, go to "If you have never synced your device with iTunes, or you do not have access to a computer" section below.
    If you have never synced your device with iTunes, or you do not have access to a computer
    If you see one of following alerts, you need to erase the device:
    "iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."
    "You haven't chosen to have [device] trust this computer"
    If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
    Alternatively, place the device in recovery mode and restore it to erase the device:
    Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
    While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    Continue holding the Home button until you see the Connect to iTunes screen.
    iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.

  • The iBooks page on my iPad2 has locked. I cannot move on the page. I can close the page, and everything else is working fine. Does any one have any ideas for unlocking, resetting, or somehow getting the iBooks page to work? Thank you.

    The iBooks page on my iPad2 has locked. I cannot move on the page. I can close the page, and everything else is working fine. THis happened in the middle of a download. Does any one have any ideas for unlocking, resetting, or somehow getting the iBooks page to work? Thank you.

    Just re-set the App -
    Open the App
    Hold down the power button until the slider appears
    Hold down the home button (Don't use the slider) Until the App Closes
    You might lose your place, but shouldnt be too hard to find it again...

  • It seems after the latest software update, my iphone 4 has issues with the phone and voicemail locking up as well as opening random apps.  Any thoughts?

    It seems after the latest software update, my iphone 4 has issues with the phone and voicemail locking up as well as opening random apps.  Any thoughts?

    Hi clintfromid,
    Thanks for using Apple Support Communities.  I would recommend closing all your apps and restarting and maybe resetting as good initial troubleshooting steps for this:
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/HT1430
    Cheers,
    - Ari

  • HT1688 Scenerio: Walking in the park and I collaspse unconscious. how would my iPhone4s help a stranger/Police/Medic to know my identiy. The iphone4s is locked and the app for I.C.E. cannot be opened.  I am now considered Jane Doe cause I dont have any ID

    how would my iPhone4s help a stranger/Police/Medic to know my identiy. The iphone4s is locked and the app for I.C.E. cannot be opened.  I am now considered Jane Doe cause I dont have any ID on me.

    If you're concerned, you could always create wallpaper with some sort of ID/contact information and place it on the lock screen. I wouldn't suggest using any direct contact for you, of course, for privacy reasons, but perhaps some sort of "neutral" emergency contact such as a relative's cell phone.
    Or just carry some sort of ID; depending on a cell phone for identification probably isn't reliable regardless of the phone used. A MedicAlert bracelet or something similar might be your best option since that would allow emergency responders to get your information while still protecting your privacy.
    Regards.

Maybe you are looking for

  • Zen Touch... giving up the gho

    Hi all, long time no see - board's grown quite a bit since last I was here...! My 20gig Zen Touch seems to be getting confused in its (relati've...) old age, and often thinks I've pressed the 'random play all' button when in fact I've just pressed 'p

  • STRUSTSS02 - No file format option for import

    Hi Experts, I am trying to import portal certificate into ECC 6.0 EHP7 system for SSO set up. But I dont see the file format option ( Binary and Base) in STRUSTSS02 and If I import without it I am getting an error "cannot analyze certificate" what co

  • Get rid of the "P" when to close to mic

    I am nto sure how else to explain this but you know when someone holds their mouth too close to the mic and when they pronounce anyting with a "P" in it, the sound spikes and mkaes a loud POP? How do you get rid of that? I have tried "remove pop's an

  • IE7 vs IE9 - any reason to update specific to Captivate?

    I am listing minimum requirements to use Captivate training.  MANY users have IE 7 and it would be a monumental task to upgrade them all right now UNLESS their is a specific browser version problem with IE7.  Does anyone know of any problems?  If so,

  • Exporting individual clips

    Hi everyone, In the share section, is it possible to export  indidual edited clips or can you only export the etire movie as a whole? I'd like to add some of my clips to another project but only the edited versions. I am using PE 10. Thanks!