IPhone5 No Service / Searching Issue

I have an iPhone5 that intermittently loses the network and the screen shows searching. This issue lasted about a week. I tried everything from resetting the network connections to restoring the phone to the most recent back-up. As none of this worked I took the phone in and although Apple couldn't find anything wrong with the phone they replaced it as I was still under my AppleCare+ warranty. Two hours after setting up the new phone using my most recent backup the issues continued. I then took the new phone to AT&T for a new SIM card and again about 2 hours later the symptoms reappeared. Anyone ever heard of this? Is it possible that there is an App on the phone causing this problem?

Hi,
I have the same problem with an iPhone 4 16GB Factory Unlocked. I tried 2 SIM Cards, restored it multiple times, reset network settings, turned phone on and off, airplane mode on and off, upgraded from iOS 4 to 5.0.1, and still have the same problem. The most it kept the signal was up to 9 hours, than it started repeating the problem.
Sometimes the phone drops signal to one bar and comes back up to full signal; which does not really bother me, since its only about 5 seconds without signal. But the main problem is, when the phone is idle, on the table or pocket (so it is not the case of covering the anntena with hand), it drops the signal and it shows Searching for some seconds and then it says No Service. Sometimes the Airplane Mode On Off works or Turning Phone On and Off. Additionally, the problem also occurs with using the phone with other apps.
I don't have an Apple Store in my country, and the local phone repairs said that we can't do anything. One phone repair shop said it must be a hardware problem, and that he can TRY to fix it (the part try was a little risky for me).
Phone was never dropped to ground or anything of that nature. The reception of signal from local carriers is very strong all around the city.
Any help is really appreciated.

Similar Messages

I experience issue with my Verizon iPhone5s cellular service not working on 3G.

I'm experiencing issue with my Verizon iPhone5s cellular service not working on 3G but LTE works great. I tried resetting network setting, new SIM card, reset iPhone to new too. I'm have the latest carrier code of 16.0. Iphone firmware 7.1.2.
I started experiencing this when verizon started advertising XLTE.
It is very frustrating when internet does not work when I'm in 3G area. Phone calls does work though. Signal is good too.
Thank you in advance.

I would agree w you but this only happens on Iphone5S.
Iphone5 works fine. I tested this with other Iphone 5 and 5s.
To test this, go to setting/celluar/turn off "Enable LTE"

Sharepoint Server 2013 Search Issue

Hi,
running Sharepoint server 2013. search service application is not working properly. getting the below error message.
"Unable to retrieve topology component health states. This may be because the admin component is not up and running"
we have 2 tier sharepoint 2013 farm architecture. please find the below server details.
1. WFE & APP server (OS: Windows Server 2008 R2 SP1 and RAM: 8 GB)
2. database server (OS: Windows Server 2008 R2 SP1 and RAM: 8 GB)
I tried the following:
- installed the latest sharepoint server 2013 CU.
- OS is up to date.
- deleted and recreated Search Service Application
- The service account does have access to the search databases
- one account is used, domain\sp2013search, has all necessary permissions
Please help to fix the search issue.

Hi Raj0639,
According to your description, my understanding is that you got an error when you run SharePoint 2013 Search.
Firstly, please make sure that all servers are online, and connecting to others.
Please stop all search services on Manage services on server, then restart them. Please try to do as Amit said, compare the result.
If this issue still exists, please repair SharePoint 2013 under Control Panel, then compare the result.
Here is a similar post for you to take a look at:
http://social.technet.microsoft.com/Forums/en-US/a67b0d0f-4f5a-4412-8f83-a57eaff4be45/sharepoint-search-host-controller-does-not-start?forum=sharepoin
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

HT1688 My iphone 3GS is showing no service your network is restriced you can choose a different network in settings ive tried a restore and upgrading software/downgrading still no fix just no service searching...

My iphone 3GS is showing no service your network is restriced you can choose a different network in settings ive tried a restore and upgrading software/downgrading still no fix just no service searching...
I have no idea why this has happend ive been using the phone for 2years bought it on pay as you go and now all of a sudden its stating the above error i have never come across this problem before and currently im using 3GS and Iphone 4S

Sounds like it's been blacklisted.
Even if it hasn't, downgrading voids any warranty and forfeits all rights to support. You hacked your phone. You can't get help here.

Does the 10.5.7 update address command+f finder search issues?

Does the 10.5.7 update address command+f finder search issues?
Search has been horrible under 10.5 in that it does not reliably find FOLDERS on network drives, only file names.
Even when I am looking directly at a folder and I search for it will not appear in the command+f window.
Also the stupidity of not allowing a specific search location.
Has this been addressed? I have, at any given time, 3-4 mounted servers.
I do not have a choice now to search a specific hard drive.
10.4.11 gave me the option under "OTHERS" to select a specific place to search.
The only choice I have in 10.5.2 is "SHARED". Which searches all drives when I only want to search one. Nor do I have a choice of searching just one of my two internal drives.
I talked with Chris in apple engineering several months ago, who acknowledged that search problems are a known issue under 10.5 and this was being addressed but have not heard any more. I don't want to download an update unless these broken search issues have been fixed. This is a production machine and I cannot have downtime in the Dept.

Have you filed a bug report or enhancement request with Apple?
http://bugreport.apple.com/

Configuring Browsing Indexes for Service Search Descriptor Filters

I am running DSEE 6.1 on Solaris 10.
I restrict access to the ldap clients (solaris8, 9, and 10) for various users in the Directory by configuring the service search descriptors to use a filter based on specific roles. Each servers profile mentions a role depending on type of server and then users are assigned roles which are nested within specific server type roles:
NS_LDAP_SERVICE_SEARCH_DESC= passwd:ou=People,dc=example,dc=com?one?nsrole=cn=serverRole,ou=profile,dc=example,dc=com
NS_LDAP_SERVICE_SEARCH_DESC= group:ou=group,dc=example,dc=com?one
NS_LDAP_SERVICE_SEARCH_DESC= audit_user:ou=People,dc=example,dc=com?one?nsrole=cn=serverRole,ou=profile,dc=example,dc=com
NS_LDAP_SERVICE_SEARCH_DESC= shadow:ou=People,dc=example,dc=com?one?nsrole=cn=serverRole,ou=profile,dc=example,dc=com
NS_LDAP_SERVICE_SEARCH_DESC= user_attr:ou=People,dc=example,dc=com?one?nsrole=cn=serverRole,ou=profile,dc=example,dc=com
I have noticed in my error logs on the Directory servers messages regarding these filters not being indexed:
WARNING<20805> - Backend Database - conn=949139 op=1 msgId=2 - search is not indexed base='ou=people,dc=example,dc=com' filter='(nsRole=cn=serverRole,ou=profile,dc=example,dc=com)' scope='one'
I have also had a few instances where the naming services seems to have stopped altogether. This seems to be timed with when my clients do a refresh of the ldap cache - which is the time that I seed the not indexed messages in the error log.
I guess that I need to set up Browsing Indexes for these filters
Can anyone give examples how to do this?
I guess I will need a vlvBase of ou=people,dc=example,dc=com
vlvScope of 1
vlvFilter of nsRole=cn=serverRole,ou=profile,dc=example,dc=com
I am not sure what I would do for vlvsort attributes though??

The access logs shows that the attributes to be sorted are uid and cn:
25/Apr/2008:09:58:21 +1200] conn=171835 op=1 msgId=2 - SRCH base="ou=people,dc=example,dc=com" scope=1 filter="(nsRole=cn=serverRole,ou=profile,dc=example,dc=com)" attrs="cn uid uidNumber gidNumber gecos description homeDirectory loginShell"
[25/Apr/2008:09:58:21 +1200] conn=171835 op=1 msgId=2 - SORT cn uid (1426)
[25/Apr/2008:09:58:21 +1200] conn=171835 op=1 msgId=2 - VLV 0:999:0:0 1:1426 (0)
[25/Apr/2008:09:58:26 +1200] conn=171835 op=1 msgId=2 - RESULT err=0 tag=101 nentries=999 etime=5 notes=U
So the vlvsort attributes should be cn and uid.

I don't know exactly when this started, but Winamp became my default search and homepage.. The homepage issue was easy, but the search issue is bigger than I expected. It ALWAYS uses Winamp (Powered by AOL) as my default search. Please help. Thank you.

I don't know exactly when this started, but Winamp became my default search and homepage.. The homepage issue was easy, but the search issue is bigger than I expected. It ALWAYS uses Winamp (Powered by AOL) as my default search. Please help. Thank you.

reinstall it but make sure to uncheck the box next to "make winamp my default search engine"
attached is screenshot from the part of installation proces where that checbox should be unchecked
hope this helps

CSC Customer Search issue in Weblogic

We have extended the customer search in CSC for searching through "ProfileID" property.
This functionality is not working when the EAR is deployed in Weblogic.(Please find the error log attached)
But when the same EAR is deployed in jboss, its working.
Please help on this issue.
Error Log
<Error> <HTTP> <BEA-101017> <[ServletContext@43144004[app:Project-csc module:agent path:/agent spec-version:], request: Workmanager: default, Version: 0, Scheduled=true, Started=true, Started time: 47 ms
POST /agent/framework.jsp HTTP/1.1
User-Agent: Mozilla/5.0 (Windows NT 5.1; rv:15.0) Gecko/20100101 Firefox/15.0
Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8
Accept-Language: en-us,en;q=0.5
Accept-Encoding: gzip, deflate
Connection: keep-alive
Content-Type: application/x-www-form-urlencoded; charset=UTF-8
Referer: http://localhost:7003/agent/main.jsp?_windowid=2
Content-Length: 7485
Cookie: atg.allwindows.lastrequest=1357124645500; JSESSIONID=XjfJQkPS1Jv1plngypdKk1y3bDW2wnyykxp4jty9J9L0TLHdgj7z!1285435330
Pragma: no-cache
Cache-Control: no-cache
]] Root cause of ServletException.
java.lang.NullPointerException
at atg.core.util.StringUtils.makeList(StringUtils.java:1309)
at atg.core.util.StringUtils.makeList(StringUtils.java:1262)
at atg.search.routing.command.search.Field.getNamesString(Field.java:175)
at atg.search.routing.command.search.Field.getAttributeXML(Field.java:246)
at atg.search.routing.command.SearchXMLObject.getAllAttributeXML(SearchXMLObject.java:382)
Truncated. see log file for complete stacktrace
>
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Refer following thread
ATG10.1 CSC search issue | NullPointerException

Search issue with plurals?

RH9, webhelp, merged project.
Just reported to me and I can confirm: There seems to be a content search issue where the singular works, but not the plural, even if the plural is what we use. Specific example: Enhancement vs. Enhancements. We have several topics that are labeled or refer to "Enhancements", but searching with that term finds nothing, while using "Enhancement" finds those terms.
"Ticket" vs "Tickets" results in a similar issue. The behavior appears to be that the singular form can find either version - singular or plural - but plural search terms result in no matches at all.
Any ideas what may be causing this?

Are you testing on the published help or the generated help. The latter is rebuilt every time.
Try in one of the sample projects. Click Open on the RoboHelp Starter page and then click Samples in the ribbon on the left.
If that works, try downloading the demo merged help from my site and generate from that. Test that works.
Post back with the results at that point.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Search Issue ... URGENT

i have a search issue :-
1. user logs in to the site and enters 'opadry' in the search field.
2. the search retrieves the required results.
3. but the result page shows the 'Administration' and 'Navigator' links on the top right of the page.
4. through these links the user can go to the forms, reports etc at look at them at design time.
5. how do i prevent this ? because i do not want the users to see these links.
has anyone had these problems ?
any help would be greatly appreciated.
thanx a lot.
null

I remember seeing the reply somewhere. Pls check the archive. I present version it is not possible.

Mail wants to use the restricted Service "Search With Google."

This is the response/error I see when I try to do a Google search from an email message - "Mail wants to use the restricted Service “Search With Google.”"

Interesting - I just created a new user account I named "Test", and tried "Search With Google" in Notes and it worked fine in this new account. Without any additional change, I went back into my normal user account, and tried to use "Search with Google" on the highlighted word, and it pulled up the Google search fine as well. No reason I can think of that these actions would have resolved the problem - e.g., either the creation of the "Test" account, or switching between this "Test" account and my normal account. Possibly creating new account caused a cleanup of the Safari preferences to point to version 6.0.(essentially reset the default)
Would be curious if droow007 solution works for others. Definitely quicker than the route I went :~)

I cant send texts to a lot of numbers since i have bought the iphone5. Service Provided is airtel and they say nothing is wrong at their end. Plz help

I cant send texts to a lot of numbers since i have bought the iphone5.
Service Provided is airtel and they say nothing is wrong at their end.
I did not face any problems with my earlier phone. The numbers that I can send texts to, the msgs are always delivered to them.
And the to the numbers that I cannot send texts, they always fail and give me this "Message Send Failure".
Plz help

Well i'll try calling em again but i dont think they will take the ownership and they never get annoyed coz evrytm its a new person..lol. Thnx for your help though.
And restoring might not help coz this has been the case since Day 1 of iphone 5.
Thanks again

IPHONE CONSTANTLY SHOWING NO SERVICE/SEARCHING

Hello All,
i would like some desperate help and would be so grateful.
My iphone, after updating to ios7.1.1 now just shows no service/ searching.
I have tried everything listed below:
restore to factory settings
manual enter settings
restore network settings
none of this works and i am getting more and more frustrated!
I would be so grateful with all your help.
Please Help me

Hello aadil_93,
Thank you for contacting Apple Support Communities.
It appears you have done a number of the suggestions in the following article, but there appear to be additional steps there that you may want to persue.
iPhone: Troubleshooting No Service
http://support.apple.com/kb/TS4429
Regards,
Jeff D.

I cannot type a web page on my iphone5 on the search or enter website name window of safari. as I type w the system brings me back to the phone main screen. This has happened since I updated to the new iOS 8

I cannot type a web page on my iphone5 on the search or enter website name window of safari. as I type w the system brings me back to the phone main screen. This has happened since I updated to the new iOS 8

You haven't mentioned any steps you might have tried to correct this so I'll suggest you try the first troubleshooting step. Reset your iPhone. Press and hold the Home and Sleep/Wake buttons simultaneously until the Apple logo appears. Then release the buttons and let the device restart. No data will be lost doing this. It's like rebooting a computer.

Iphone5 with wrt542g wireless issue

hi all
Iphone5 with wrt542g wireless issue
when phone is on standby and you try to connect you have to enter the pass key every time you open the phone
and by the way i have iphone 5
remember that each time i open my iphone 5 i have to login with my wireless password
thanks
regards
raid
[email protected]

If in the event that the problem is with the router; try to upgrade the router’s firmware and then reset the router afterwards. Try also to isolate this problem by using another wireless device (like a laptop). In this way, you will be able to determine if the problem is really with the router or if it has something to do with your iphone.

IPhone5 No Service / Searching Issue

Similar Messages

Maybe you are looking for