Iphone5 screen shows 4G when wifi is connected.

As shown in the title, I have iphone5. I bought a router to use wifi at home. It is wierd that the phone is connected to wifi (I checked in the setting), but the screen shows 4G. I am afraid that I keep using cellular network but not wifi. What should I do? Does anyone know whether I am using wifi or not in this case?

It showed the wifi fan the first day when I set up my router which was yesterday. Then, today it start showing 4G again. I know the device is connected to wifi because I checked the setting. It say Wifi connected to my network. You asked what happens when celluar data is off. I looked for it, but didn't figure it out how to block cellular network. Could you let me know so that I can try?
The router is Belkin that is made for smartphone wifi. Thank you so much for helping me. Please help me more.

Similar Messages

  • HT201210 iPhone 4s will not turn on, a screen shows up telling me to connect to iTunes to restore and update to iOs7, but when I try to restore error 2001 comes up and will not let me restore. I still cannot turn my phone on. None of the troubleshooting t

    iPhone 4s will not turn on, a screen shows up telling me to connect to iTunes to restore and update to iOs7, but when I try to restore error 2001 comes up and will not let me restore. I still cannot turn my phone on. None of the troubleshooting tips work, help??

    Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
    These errors typically occur when security software interferes with the restore and update process.
    FollowTroubleshooting security software issues to resolve this issue.
    In rare cases, these errors may be a hardware issue.
    If the errors persist on another computer, the device may need service.

  • A private web screen shows up when I close down apps on my ipad, but I don't want to see that web page EVER.  It is a private "incognito" Skype number that I don't want ANYONE to see.

    A private web screen shows up when I close down apps on my ipad, but I don't want to see that web page EVER.  It is a private "incognito" Skype number that I don't want ANYONE to see.

    Yeah, I'm 95% sure that I did that after I closed that Skype, so I was a bit shocked when I saw that screen pop up later :/

  • Ipod touch has stopped working. the screen showes that it need to connect to power.

    ipod touch has stopped working. the screen showes that it need to connect to power.

    Hey there our3goldens,
    It sounds like you are unable to successfully boot your iPod Touch. I would recommend these steps specifically from the following article, named:
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    If the device remains unresponsive or does not turn on (or power on), reset your device.
    Let it charge for at least twenty minutes, then see if it starts normally.
    If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
    If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
    If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
    Connect the device to your computer and open iTunes.
    If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
    If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
    If the above steps do not resolve the issue, contact Apple.
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • To everyone that has "server not responding" when wifi is connected, read.

    For the 2 years I've had my 3GS I have had a issue with wifi and my Belkin n+. I replaced the router 2 times with same model and had a few iPhone exchanges. I don't see this as a router issue entirely because no other device besides iPhones have a problem.
    After 20 minutes or so using wifi or it just being connected and me not locking the screen, it suddenly stops responding. Wifi signal still there, settings says it's connected. Different sys apps tell me my local ip but can't determine external during this time. I used inet to ping the router when it's in this state, no response.
    The only way to fix it is to toggle wifi off then back on.
    I think I found a solution for the people having this issue, I hope one of these days apple actually fixes the bug. I believe it's related to wpa2 and aes.
    SSID no spaces A-z characters
    Mac address filtering is useless and provides no security
    Wpa2 with aes causes the problem. I even shortened my passcode to 12345678, still had problem.
    Setting ip, subnet, dns settings manually instead of dhcp did not solve problem.
    Resetting settings On both router and iPhone did not work.
    Router is latest firmware and again no issues with anything besides iOS products.
    Wifi is set to b/g only. 20mhz band only, router gives option of 20/40 mode even if n is off.
    iOs devices are not compatible with 40mhz, make sure this is off.
    I determined it's not a dns issue by trying ip's including my local router ip. It failed to connect even though the iPhone says it's connected.
    What is working so far, I changed my security to WPA and TKIP and so far it hasn't happened, but I'll will keep on testing and won't turn off my screen or disconnect from wifi. So far using wifi 2 hours straight no issue.
    This issue has been in every update from 3.0 to 4.3. It seems from searching there are incompatibilities with routers and certain security settings. My professional guess as a programmer is there is a bug in the iOS wifi firmware or driver when negotiating and reauthenticating under certain situations, that is why it happens like clock work.
    I also noticed this issue does not affect the 3G because it uses a different chip. I'm not sure if the iPad uses the same chip as the 3GS and I am pretty sure the iPhone 4 uses a different chip.
    So if you reply please post your device model, router model and wifi settings and see of we can help ourselves and apple find a fix for this issue, because if it's not fixed by June, I doubt I will get a iPhone 5
    Message was edited by: sevenalive

    So far so good, I have had it connected since my last post and did not recent the wifi, go out of range, or turn off my screen (when turning off the screen, wifi usually turns off to save power). So far everytime I checked, it loaded pages right up.
    Thanks for letting me know of the firmware update, it was last updated over a year ago and I last checked in Jan, I thought they were done with updates. Looks like it is finally fixed, if anything changes I will post back.

  • Ipod touch doesn't turn on, screen shows that it must be connected to itunes.

    pod touch doesn't turn on, screen only shows that it must be connected to iTunes. After connecting it and clicking the 'restore', downloaded the software needed to update the device. After all these steps, nothing happened. then the screen suddenly showed the apple logo, then the symbol that shows it must be connected to itunes.. happens again and again.

    Maybe here:
    Restore loop (being prompted to restore again after a restore successfully completes)
    Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
    http://support.apple.com/kb/TS3694

  • HT4623 i mistakenly disconnected from wireless network before ios7 update was complete. my ipad is stuck on screen showing that it needs to connect to itunes. i don't have that option at the moment- what do i do??

    i am traveling and do not have access to itunes. how can i get my ipad 'unstuck' on screen showing need to connect to itunes??

    You have no other option but to connect to iTunes or take it to your nearest apple store for them to reboot.

  • Signal level lights don't light up even when wifi is connected

    I have a new MBP (the Core 2 Duo one). When I'm connected to a wifi access point, the Signal Level lights in the Internet Connect window never light up. Anyone else seen anything like this? I suppose it's not a huge deal, since I'm getting a connection OK. It's just that I'm curious how good my connection is. And it seems strange they'd make these nice little fake LEDs but then not use them.

    iStumbler will give you better information
    http://www.istumbler.net/

  • Connecting to LTE when WiFi is connected on lock screen

    I haven't really had this issue until the latest update came out. But I've noticed that when my phone is not in use, and I wake it up using the Sleep/wake button, I notice my wireless connectivity says LTE (we have thankfully JUST gotten LTE in my small town and I LOVE IT!) when I'm at home and I'm obviously connected to WiFi at the same time. After it wakes up and the screen is lit and everything, after 2 seconds it goes right back to WiFi.
    My only concerns is that is it staying connected to my celluar data in this state when it's in sleep mode, and background apps that are running (like push mail, facebook, skype, ect.) eating up my celluar data when there is already a WiFi connection established? Be it or not, just wanted to throw my concerns out because I know how it feels to have overages on your cellular data plan. Thank you.

    When the phone asleep wifi is turned off to save battery power and when you wake up the phone wifi reconnects.  That is normal operation for the phone

  • Why does my iPhone5s not show up when I connect it with iTunes on Window 8?

    I am trying to sync my iPhone5s with my iTunes on my windows 8 laptop and it does not recognize it.
    It does recognise it on a windows 7 laptop?
    where can I find the right insturctions on how to sync it?

    both my ipod touch 4th gen and my iPad Air is not detected., i have tried checking the USB cables,. and the Apple Mobile Device (Stop/Start Service from Computer MAnagement) in Windows 8.1 iTunes 11.1.5 is not detecting the devices,., i have check already for all updates,. nothing happens.,., but WIndows does detect the devices only itunes does not

  • Iphone 4 randomly came up with a grey screen showing 'ios6' and then said 'connect to iTunes'. However iTunes won't pick the device up and states there is an error with the device?

    My iPhone was working fine yesterday and then showed a grey screen with the message 'ios6'. When I tried to use the phone it came up with the error message 'connect to iTunes'. When I got home from work I did this, at first iTunes could not detect the device and then it suggested a system restore. Once the restore had completed I selected the language, country/region and then came back to the same error message 'connect to iTunes'. When I tried to connect the device iTunes could not detect it and stated that there was a problem with the device.
    I have telephoned my network provider to request a replacement device on my insurance but they have said they cannot authorise until I have had the fault diagnosed my Apple. Only problem is there are no genius appointments free until Friday!
    Any help would be massively appreciated!

    We're not Apple. Se can not magically make a genius appointment available for you.

  • My photos will no longer sync to my laptop when wifi is connected

    I dont understand why my pictures suddenly stopped synching to my computer when I am home and automatically connected to wifi. Anyone know how to fix this?

    Nvm I have figured this out on my own. Turn off photo stream on icould desktop, log out, log in, re turn on photo stream and fixed.

  • Screen Sharing crashes when trying to connect.

    I'm on my MacBookPro (10.6.6).
    When I try to connect to my desktop (10.6.8) (from clicking the Share Screen button in finder) I get the "enter name and password" box. When I enter the info, I get a crash "Screen Sharing closed unexpectedly" and then I'm left with the "enter name and password" dialog with a spinning "connecting" status floating above my screen forever (killing the finder does nothing to it).
    The macbook connects to my G5 running 10.5.8 with no problem. The G5 connects to both macbook and other desktop fine. The other desktop connects to the macbook and G5 fine.
    Anyone have any thoughts?

    Try and create a new standard user account on the MBP, and check if you can connect from this one. If so, something's wrong on your current account. You might consider migrating from the old to the new one, and delete the former after that.
    If you can't connect at all, go to System Preferences, disable file sharing, then go to /Library/Preferences, locate the com.apple.preferences.sharing plist file, and relocate it on your Desktop (admin password required). Reboot your Mac, relaunch/enable file sharing, and let your system create a new com.apple.preferences.sharing plist file.

  • TS3899 trouble getting email when wifi is connected

    I'm new to Iphone  I am able to get my emails when on the Verizon data network.  However, when I am on my company's wifi, I cannot connect to get email.  I can access internet.   As soon as I turn off my wifi, mail comes through.  Seems to work fine when I'm on my home wifi.
    Any thoughts on how I can fix.
    thanks

    iStumbler will give you better information
    http://www.istumbler.net/

  • Screen Bleed - Wrong Screen Shows Up When Playing Project

    I'm on Captivate 6.
    Creating a demo simulation with a lot of buttons that "Go to Next Slide" or "Go to specific slide.  Also have some auto-advance slides based on timing.
    When editing, screens look fine.  After adding some buttons and hightlight boxes, I then either PREVIEW (both in or out of browser) or PUBLISH (SWF / HTML5 / EXE) and when I play it back, I occasionally will get the wrong background or pieces of the wrong background showing up on the wrong slide.
    In one specific case, I took a screen shot of an application with a drop down box in it.   When I play it back, I see just the drop down, but it's superimposed on SLIDE 1.   But, as mention, in the editor, everything looks perfectly fine. 
    I also have a auto-advance slide that moves forward after a half-second... when I play back and get to that slide, I see a portion of the top of another slide for about 1/4 second... then I see the actual slide.. .and then it moves forward to the next slide.
    There is no rhyme or reason as to why and / or when this occurs.   And I can sometimes be 100% fine, but then maybe I cut / paste some buttons / hightlight boxes from one slide to another, and then that slide (which was working fine before) might start having this issue.
    I'd like to know if there is a way to easily fix this.  It's making it nearly impossible for me to use Captivate to create these, what should be very "simple" demo simulations.

    While I never resolved this issue, I did find a viable workaround, better than "republishing several times" (and then having to re-verify every single screen in my demo was correct), which was initially the only way I could get around the problem.
    What I have found is if you do a "select all" slides (i.e. click on first slide and then CNTL-A) and then right click and "Mouse - Show Mouse" to show mouse, then follow that up with a right click "Mouse - Show Mouse" to hide mouse... save project and re-publish, that seems to consistently and completely take care of the bleed issue for that particular publish.  It's almost as if that does some sort of re-calibration of the entire project to "fix" any issues.  (Makes me wonder if "recalibration" should not be a menu option in Captivate that does whatever it is my workaround does to fix the issue?)
    Few comments about my workaround:
    I want the mouse hidden on ALL my slides, thus the "show mouse / hide mouse".  If your project requires the mouse to exist on all slides, do the opposite.
    On projects with many slides, this "show" and "hide" on all slides at once can take a bit of time to complete.
    Whenever I "show mouse", the default mouse timing many times lengthens my slide time from what I actually desire.  So the very first time I "show mouse", I go thru and manually size them all to 0.1 seconds.   Guessing there's probably an easier way to do this, but I got tired of always having to re-adjust my slides after hiding the mouse before publishing.
    If your project has mouse visible on some slides and not on others, I have not tried my workaround solution to that.  But I'd suspect you'd have to selectively choose slides (instead of CNTL-A) and then "show / hide" or "hide / show" based on whether or not you want the mouse.   On big projects, this could be annoying!
    I am attaching a screen print to illustrate my issue.  I've had two others in my company on different computers that experience this exact same issue.  I was a bit surprised to not find more "complaints" about this online as, at least for me, it's more than just a random happening.   I am publishing to SWF and HTML5.
    I have also noticed a similar thing occuring when using the "MEDIA" publish to an .exe file.  In at least one of those cases, my "hide / show mouse" workaround did not seem to work.
    At least for me, this was a workaround solution that made using Captivate viable for my needs.  Otherwise, due to my large number of projects with many slides, I would have had to investigate and change to a different solution.   The "republishing several times" option would have taken too long and also not have provided me comfort knowing my problem was actually fixed on every slide.

Maybe you are looking for