Iphone5 touchscreen problem

I purchased iphone5 day before yesterday and since then I am facing issue with the touchscreen as the corner of the screen is not responding to touch properly for example the WiFi on and of option takes at least 4-5 taps to activate or deactivate, I request all of you to try turning WiFi in and of with any fingure other than thumb and letme know. For this I went to apple service centre which actually to me didn't looked like one because of its name(RSG INFOTECH) and infrastructure, I was really shocked to see the way customers were treated there and almost all customers who came there were unhappy say 9 of 10 were going out with bad comments. When my turn came, the lady was stubborn to accept the problem and was saying it was normal and it's my psychology for which I had to go and ask a guy for his iphone5 and then use both in front of her, finally she told ok there may be a problem. After that she takes my brandnew iPhone and tells me that I wil get back after two days and when I asked her what they are going to do with it then she told me that they are going to open my brand new iPhone and do diagnostic test!!....I was like *** its a brand new iPhone and I did not made a single call from it and you want to break its virginity.
Seriously guys this was my first and last pyrchase from apple.
Sorry for such a long post.

No it is an apple service centre, today I took my phone back and to my shock the problem is as it is and to make it more worse there are 3 scuffs on top which service centre says I have done. It was just 4 days old phone and no I feel as if it is 1 yr old phone.

Similar Messages

  • HT4623 I have an ipad3, iPhone3gs and iPhone5, my problem is my apple ID works all 3 devices but I need a second ID for the iPhone 5. How do I delete my ID and set up a new one for the iPhone5 but keeping my own apple ID for the iPad and iPhone 3GS

    I have an ipad3, iPhone3gs and iPhone5, my problem is my apple ID works all 3 devices but I need a second ID for the iPhone 5. How do I delete my ID and set up a new one for the iPhone5 but keeping my own apple ID for the iPad and iPhone 3GS.

    http://support.apple.com/kb/he37

  • Touchpad touchscreen problems (erratic behavior/not responding correctly/etc) temporary solution.

    I bought a HP Touchpad about a month or two after it came out. It worked pretty much as you'd expect it to until some time ago. I started getting a problem where the screen would go crazy and not respond correctly to my touch inputs. Web pages would jump all over the place, cards would zoom out, etc, in other words, they would behave erratically. After some testing I noticed that certain areas  of the touchscreen would NOT respond at all to inputs while others would make the screen go crazy like I mentioned previously. I looked for information on the web to see if other people where having the same problem and found reports of the same behavior. Unfortunately there where no solutions offered. At that point I tried turning on and off the Touchpad which did not resolve the problem. My next step was to try to reinstall the OS with WebOS Doctor, but I read a post where the user reported similar behavior and reinstalling with WebOS Doctor didn't fix the problem. Needless to say I was bummed out since I figured it was a hardware problem with the touchscreen. After more testing I found a temporary solution to the problem which seems to suggest that the probem could be software. The solution when you get the problem is to hold down the power button and the home button at the same time and keep them pressed until the screen shuts down and the touchpad restarts. Once the OS comes back up it works like it is supposed to until you get the next episode of screen epilepsy. At that point you need to do the procedure again and it will fix the problem temporarily. Usually the fix lasts for a few days in my case. The fix also solves other problems I have with the touchpad. Problems like, videos not playing fluidly or freezing every few seconds although the sound plays fine (youtube), sound gets messed up (sounds are played in a robot like pitch), and others. If anybody has questions or other suggestions let me know, I will answer the as best as I can.
    Post relates to: HP TouchPad (WiFi)

    I think the YouTube and sound problems are separate from the other erratic behaviour.  Recently my touchpad won't play YouTube videos beyond certain points, starting a few seconds in possibly due to the advertising pop-ups - I can skip forwards, but that means I miss crucial parts.  My sound also goes 'robot-like' until a reboot, which is incredibly annoying!  Your touchscreen problems may be specific to your device - try going to Device Info / Diagnostics and see if that tells you anything.

  • HT1937 I recieved new iphone5 cause my old iphone5 had problem. I couldnt send my old iphone5 back cause, Im in military. I know u have to charge, but if i still send my old iphone5, then can i get money back??

    Hi,
    I received new iphone5 cause my old iphone5 has problems.
    I had to send my old iphone5 back, but I couldnt. Cause Im in us military , I had urgent problem in my troops.
    So I had to go other state during 2 weeks and I just got back from other state.
    I really apologize that I couldnt sent it back.
    I knew if i dont send my old iphone back in 10 days, apple s gonna charge 680 dollars.
    Now I can send it back to apple my old iphone5.
    If I send it, and u guys get back, then can I get my holding money back?? ( just checked my bank account
    It was around 680 dollars)
    Thanks for sens new iphone5 and I hope to get good news back.
    Thanks apple always!

    You're not talking to Apple. This is a user forum. We can't answer that question. Contact AppleCare.

  • TouchSmart IQ506 Touchscreen Problems

    Our company recently got a TouchSmart IQ506 with Windows Vista 64bit, and everything was working fine. We did a fresh reformat, got it in the network and ran all the updates and such. As you may, or may not, know, the IQ506 doesn't have a VGA port to setup a second monitor or connect to a projector, so in order to use the TouchSmart mirroring an image to the projector we purchased StarTech's USB 2.0 to VGA Display Adapter. I installed the drivers and got it working and mirroring the image properly, however, now I am having a problem with the touchscreen.
    The touchscreen is responding when I touch it, but the pointer is flushed all the way to the right. The mouse follows my stylus up and down with me, but it doesn't come to the left. It is as if the screen is only reading the y-coordinates of where I am touching, and the x-coordinates are stuck all the way to the right.
    The touchscreen was working perfectly fine before I installed the graphics card driver, and the software to get the VGA display adapter to work. The mouse and keyboard is working fine, everything is perfect except for this touchscreen problem. I am 99% sure it is a software issue, and I wanted to know if there is a known issue, or if anyone else has had this kind of problem. I'm assuming it is the software for the VGA display adapter, and was wondering if that is the case, what alternatives I can make so the TouchSmart can support a second display without having touchscreen, or any other, problems.
    Sorry in advance if there is already a topic on this issue, I went thorugh the forums and didn't find anything about this.
    This question was solved.
    View Solution.

    It sound like the calibration screen and the touch "focus" has been shifted to the "primary" display - which is the last added display adapter. I don't have the setup to test, but you might be able to fix by selecting the Touch panel as the primary display (maybe). You may be stuck because the USB adapter will always be enumerated as the last device.
    Perhaps...
    1) Plug in USB adapter to enable display.
    2) Go into display options and select Touchscreen as Primary and make sure "extend desktop" is unchecked.
    You may also be able to trick the system by going into DM and removing reinstalling the real primary display adapter.
    If all fails, you should be able to unplug the USB device and use MS system restore to go back when it was working properly.
    Of course, I am saying all this without having the hardware in front ofme. I've played around with mutiple displays enough to know that you get into some funny behaviour when you have two distinct video adapters installed in the system. The best multi-display solution are those driven from one adapter - one video card with an HDMI and a DVI for example.
    If you figure this out, please reply back. I'd like to know if it is possible to keep touch while using another adapter.
    ... an HP employee expressing his own opinion.
    Please post rather than send me a Message. It's good for the community and I might not be able to get back quickly. - Thank you.

  • XPERIA Z1 touchscreen problems while getting hot

    Hi guys, I'm the owner of the Xperia Z1 for 2 months, and if I play demanding games, phone is getting hot, I know it's normal, BUT, when the phone is really hot, touchscreen have some problems, when I drawing lines, something interrupts my drawing, and when I'm moving in games which need to hold the thumb on screen, sometimes it interrupts too, I read a lot of forums about Z1 touchscreen problem, but i dunno it is software problem or hardware O.o plz help.

    one of my friends , today has bought a brand new xperia z1, tho i warned him, and he ignored me saying that mine was defective, and guess what, KA booom
    it has the same problem as my unit hahaha, you guys should've seen his face
    still the sony guys won't reply to me cause they know the problem and still shy about it, we wen't back to the sony shop, they told us that many users who have z1 compact and z ultra are coming for the same fault, 
    do you guys think it's a driver problem related to the snapdragon 800 ?
    come on guys let this thread alive again, if you make it die, sony will live you with a defective phone as long as you still own one of their dragon 800 device.
    this is very sad, as i find the xperia z1 much snappier than xperia z2 and z3 

  • Iphone5 internet problem

    i have iphone5 the problem is without useing any applcation or without downloading anything my cellular data is being used ... its like draning like anything even when i am connected to wi-fi  ... how to stop it

    i know u want to say that im rude right? but im not.. im saying the truth. Deggie told that im in fringe area. and i said im not in fringe area. im apple product user. expecially iphone product. i was using iphone 3gs until the latest iphone5. so i feel the problem and changes. im doing with some experiments;
    now i have an iphone4s and iphone5 too. Both devices are 3G indication at the top of the screen. And then i disabled the 3G and re-enabled it. The result: Iphone 4S turned from 3G to E and immediately turned to 3G. unfortunately, iphone5 turned from 3G to E and nothing change after that. Of course i did the experiment in same place at high and excellent coverage.
    my brother using iphone4s, i asked him to do the same. and the result was best for iphone4S. And i asked my sister which using iphone5 to do the same. the result was same (no indication 3G after E).
    and my conclusion, this is not carrier problem. of course the device problem whether iOS or hardware.
    i am appreciate users who attempting to help me. unfortunately you thought that i was going to take offense to other users attempting to help me? we are apple product user from all over the world and English is not my mother tongue. so sorry to say if my tone was rude-like. hope u understand with your attitude too. Thanks

  • Touchscreen Probleme

    Hallo liebe Apple Community,
    vor einigen Tagen war ich mal wieder mit meinem iPod Touch 3g joggen, als es auf einmal zu regnen anfing.
    Daraufhin schaltete ich den iPod aus um mögliche Schäden zu vermeiden. Als ich wieder zu Hause ankam konnte ich den iPod nicht mehr anschalten, also ließ ich ihn einige Tage lang einfach liegen. Danach ging er auch wieder bis auf einen kleinen Wackelkontakt des Standby-Schalters einwandfrei.
    Ein paar Tage danach fing er dann immer wieder an, abzustürzen, also schloss ich ihn an meinen PC an und als dieser meldete er könne die Daten des iPods nicht lesen, stellte ich diesen wieder her.
    Danach verweigerte der Touchscreen leider komplett den Dienst, was er vor der Wiederherstellung noch nie getan hatte.
    Ich führte also eine erneute Wiederherstellung durch und probierte auch ein Hard-Reset - kein Erfolg.
    Mittlerweile funktioniert der Touchscreen immer mal wieder kurz und dann auch wieder nicht mehr und ich muss ihn dann erneut 2-3 Male wiederherstellen bis der Touchscreen dann wieder für ein paar Minuten funktioniert.
    Was glaubt ihr? Handelt es sich um einen Hardware Fehler? Oder kann es an der Software liegen? Und wie komme ich zu einer Lösung des Problems?
    Über alle konstruktiven Antworten würde ich mich sehr freuen!

    Also ich habe jetzt meine iPod 2 Tage lang in einer Schüssel voller Reis gelassen. Danach ging er erst mal gar nicht an. Als ich ihn dann ein paar Stunden ladend liegengelassen habe ging er dann auch wieder an allerdings besteht das Touchscreen Problem nach wie vor. Ich habe auch schon mehrmals eine Wiederherstellung probiert.
    Der Anleitung kann ich leider nicht folgen, da ich meinen iPod nicht entriegelt bekomme und ich somit auch nicht an die Einstellungen herankomme.
    Allerdings sind nach wie vor die Wassersensoren nicht aktiviert.
    Was soll ich tun?

  • Daily edition (prs 900) touchscreen problem

    Does anyone know what to do about this problem?
    The touchscreen on my prs 900 daily edition has stopped working. It just doesn't respond. You touch or tap or swipe and nothing happens - no response. I cant use any screen icons that depend on the touchscreen.
    Is there a firmware update or any other solution anyone knows of? Anything I can try?

    Are you saying ONLY the touchscreen doesnt respond? So the hardware buttons are still working?
    I suggest try a soft reset (push the reset button on bottom edge), if this doesnt resolve, try a factory reset (be aware, all data will be erased), using the reset button plus sliding the power button. Instruction for further steps are on the screen.
    If that doesnt resolve the problem, service may be required.
    sonymod_cb

  • Nokia Lumia 520 touchscreen problem HELP

    So i got a Nokia 520 in June this year and ive had no problems with it but a few days ago when i switched it on the touchscreen and front buttons werent responding to touch. I removed the battery , soft reset and hard reset the phone and it's still not working. I cant take it to my local store till after Christmas and im lost without it, has anyone else had this problem and know what i can do to fix it?
    I appreciate any help! 

    hi mate, nothing you can do here except to take your phone to Nokia Care for inspection as you have tried all avenues of troubleshooting on your own accord.

  • Ipad touchscreen problem

    I have problems with my ipad's touchscreen, it doesn't respond in one part of the screen!

    Try this:
    Make sure IOS is updated to latest version
    Reboot device by pressing both the home button and sleep/wake (power) buttons at the same time for 10-15 seconds until the apple logo appears on the screen, then let go.
    If that doesn't work then reset the device by going to settings/general/reset/reset all settings
    If that doesn't work then backup and then restore the device as new.

  • IPhone5 sync problem.

    Right, hopefully i will be able to get to the bottom of my problem with a good resolution.
    I purchased a iPhone5 recently on the EE network here in the UK. I backed up my iPhone4 on my iTunes and then sync'd the new phone. However, the new phone will not connect to anything that requires cellular data.
    "Safari cannot connect open the page as your phone is not connected to the internet" is the message on the screen...
    with this message appearing on a refresh of the page "Could not activate cellular data network - You are not subscribed to a cellular data service"
    If I set the iPhone5 up as a new phone its fine and works normally/connects etc to data.
    All I want from my old phone is the messages, all of the rest of the stuff can be re-added via iTunes (Photos/apps/music) but I want to keep my messages...
    Any ideas on what I need to do. I have tried with iCloud, and computer back-up. I'm completely beaten and thus have not had internet/data on my phone for 3 days. As i need to use my phone for texts/calls. Do i have a corrupt file on my phone somewhere that is preventing the carrier from connecting properly.
    All help and advice appreciated.

    For anyone who used BackUpTrans:
    Did your BackUpTrans corrupt your messages system? It did for me, and I don't know what to do. At least once a day or so I have to reboot my iPhone because messages will stop sending / receiving. Sometimes messages disappear and I have to force quit the messages app to get it back going. More often though, it will just stop sending and then I cancel out, reboot, and it will work. iMessage is fine on my iPad, but my iPhone (which I used BackUpTrans on) is now messy. Also, it won't do group messages (those crash the messages app right away now). All changes have only been since BackUpTrans, nothing else. Any suggestions?

  • IPhone5 touchscreen "develops" grey lines around text and becomes unresponsive

    My original iPhone 5 has developed another issue with the touch screen.
    When switching the phone on after a few moments the touchscreen begins to "develop" grey lines, both vertical and horizontal around the text on the screen, which eventually renders the touchscreen inactive after approx 2 minutes.  The development of the grey lines is quicker at cold temperatures, e.g. outside
    To clear this issue I have to switch the phone off and on again (not power down).  This is now making it very difficult to browse the internet, and write messages.  It is also becoming increasingly difficult to swipe to answer calls.
    I am up to date with system upgrades, so currently on iOS 8.1.1(?)
    This is the second issue I've had with the touchscreen in 2 months, and I'm beginning to wonder if I should replace the phone all together :/
    Does anyone have any insight into this issue/had similar problems, and... is it fixable?
    Thanks!

    It is very possible, but first things first.
    This is the second issue, what was the first one? What user troubleshooting have you tried?
    What do you mean about switching the phone off and on again no powering down? What do you call turning the power off?
    As far as being fixable, first need to know what you have done as far as trying to fix the problem.

  • U430Touch - Touchscreen problem

    Hi all,
    i have a strange behaviour when I connect a usb mouse + my speekers via usb to the u430 touch. When i connect them both my touchscreen isn't working anymore. I also tried the combination with mouse + smartphone - same problem. It looks like if there are 2 devices connected to my u430 touch the touchscreen isn't working.
    When I unplug one of the connected devices the touch is still not working. I have to reboot the system.
    Would be really nice if anyone got an idea what's the problem!
    Best wishes,
    flo

    According to the User manual for your laptop, when the computer has more than a 20% charge on the battery, that USB port will support charging other devices.
    I am not 100% certain, but I can see where this might cause a problem. The port might be trying to "charge" the devices on the port other than the UB receiver for the mouse. I am not sure why it would cause a problem with the touchscreen other than the touchscreen is also a HID along with the mouse. There might be some kind of unforeseen feedback going on.
    What happens if you use any other USB port?
    Hoov
    Microsoft MVP - Consumer Security
    SpywareHammer.com

  • TungstenE2 touchscreen problems again

    I've bought two TungstenE2s in the past two years. A year ago, my first E2 developed a problem that would NOT allow me to use the letter or number input areas. When I tapped them, all I would get was a period every time I tapped.
    When I called Palm, they were no support  at all and told me to send in for paid repair.
    Rather than do that, like an idiot I bought another E2. It has worked fine until today, when I did a touchscreen reset using the bullseyes. After that I was once again unable to input text or numbers. I can believe that I got a lemon ONCE, but with the same problem happening with the second device IT HAS GOT TO BE A PROBLEM WITH THE E2.
    I do not HotSync with my computer and use the E2 purely as an organizer and calendar planner. Has anyone found a way to fix this problem which makes the device useless?
    Post relates to: Tungsten E2

    Hello alancas, Welcome to the Palm Support Community.
    It sounds like you might have "Write On Screen" activated!  This turns your entire screen into a Grafitti area. 
    Go to the Prefs icon, then "Writing Area".  If "Write On Screen" is active, turn it off.
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Maybe you are looking for

  • Nano won't update

    My beautiful ipod nano is prooving to be more trouble than it's worth....nowadays it won't update. It's recognised on my pc and everything and new songs go onto my library no problem but when it claims to be updating "mr pod" it's not! Any ideas?

  • Print to file, keeping the original filename

    Lightroom – Print mode - Print to JPEG file - Print to file. Use: All filmstrip photos. Question: How do I Print to file and save all filmstrip photos with the original names? Seemingly I can only do so image by image by typing the original name. Fur

  • No GPIB connection, but visible in MAX

    The device is visible in MAX, but I am unable to communicate with it, either by using the 'Communicate with Instrument' or the 'VISA Test Panel'. This seems slightly sporadic, as I have once or twice been able to connect and send a successful ID quer

  • Fastest way to fill an InDesign table with data

    Hello, I have to fill several InDesign tables with the content of my database. I have the database in memory and fill the cells in two Loops (For Each row..., For Each col...). But it is so slow! Is there a faster way? Here a code snippet of the solu

  • Batch Class Assignment

    Dear All, I have created a material with batch management & i have assigned a Class of type "023" in the classification view. When i open the same material again there is no class assigned to the material. this is happening to all materials..... plzz