Iphone5 wireless charger and the iphone5s

I have the iPhone5 and I want to upgrade to the iPhone 5s and I also have a wireless charger for the 5 would it still work for the 5s?

What did the wireless charger's website say as far as compatibility with the 5s?

Similar Messages

  • Do I need a different back cover for wireless charging with the Droid Turbo?

    Do I need to get a different back cover for Qi wireless charging on the Droid Turbo?  Or do I just need the charging pad?

    One thing to Remember there's usually a Sweet spot that the phone has to be right on to make it work, And just to be aware some wireless chargers can cause Warmness in the Battery and the Backs of the phone..
    Here is some Accessories From Motorola for the Turbo:  Just click on the blue Link
    Power - Smartphone Chargers and Portable Chargers by Motorola
    Music
    Talk
    Motorola

  • I just bought my macbook pro and it's charged up to 100% and is still plugged in but now shows the battery at 98%.  How is this possible when it's plugged in to the charger and the green light is on?

    I just bought my macbook pro and it's charged up to 100% and is still plugged in but now shows the battery at 98%.  How is this possible when it's plugged in to the charger and the green light is on?

    The system regularly lets the battery drop to about 95% when on the charger, then recharges to 100%.  This lets the batery exercise "just a little" all of the time and saves the recharge curcuits from overuse.
    Regualr occurence for me.
    Also ... you need to let your battery work at least once per month.  Let it run down to 40%, but not less if you can at all avoid it.  Running thr battery fully dead will shorten the battery life significantly.

  • I have done absalutely nothing to my 4g apple ipod touch, and it over heats, won't hold a charge, and the front camera will not work. I bought this brand new in december, and i've barely used it. I've tried restarting it and everything, what should i do?

    I have done absalutely nothing to my 4g apple ipod touch, and it over heats, won't hold a charge, and the front camera will not work. I bought this brand new in december, and i've barely used it. I've tried restarting it and everything, I honestly think this is out raging because i spend over $200 on this. To have for music and instagram. I use it about an hour a day, but i've only been using it for about 3 months although i've had it since December. Any suggestions that may help me?

    Try:
    - A reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory settings/new iPod
    If still problem make an appointment at the Genius Bar of an Apple store.

  • Hi, I dropped my i-phone 4 down the toilet 6 days ago and have left it in rice to dry out.  When i try turning it on there is no power.  I connected to charger and the apple sign appears.  After a while it shows iOS6 on screen and then asks me to connect

    Hi, I dropped my i-phone 4 down the toilet 6 days ago and have left it in rice to dry out.  When i try turning it on there is no power.  I connected to charger and the apple sign appears.  After a while it shows iOS6 on screen and then asks me to connect to i-tunes however my i-phone does not appear on i-tunes.  Can you advise me what to do next?

    Make an appointment at the genius bar and take your credit card. An out of warranty replacement is $199 for a 4S, $149 for a 4.

  • My iphone 3g is not charging and the middle button has stoped working please help. My phone has no power now

    My iphone 3g is not charging and the middle button has stoped working please help. My phone has no power now an i need help

    For a broken home button you can find your options here http://www.apple.com/support/service/

  • My macbook air won't turn on.. last night it was still working properly... when i woke up this morning, i went to turn it on but it didn't respond..i tried plugging the charger and the lightning cord showed a green light which is normal when charging..

    my macbook air won't turn on.. last night it was still working properly... when i woke up this morning, i went to turn it on but it didn't respond..i tried plugging the charger and the lightning cord showed a green light which is normal when charging..i tried to open the macbook air again but nothing happened.. no fans, no chimes, no light in the laptop showed..what should i do? please help..thank you

    Welcome to Apple Support Communities
    A green light means that your battery is full or that it can't be detected. If you can't start up the Mac, probably your logic board or battery aren't working.
    Take the MacBook to an Apple Store or reseller to get your battery or logic board replaced. If the MacBook is in warranty, this repair will be free

  • I recently got an extension cord for my ipad charger and the first time I used it it worked and now when I plug it in to my ipad It doesn't do anything. What do I do?

    I recently got an extension cord for my ipad charger and the first time I used it it worked and now when I plug it in to my ipad It doesn't do anything. What do I do?

    I think that we all understood what you meant. If the extension cord is no longer working, then return it.
    We are all trying to tell you that you can plug the power block into a standard household extension cord - using the short cord that came with the iPad - and there is no need for the extension cord that you bought.
    Edit - one upped by the lovely lady with the pretty kitty avatar

  • My iphone 5 will not turn on and i connect it to the charger and the logo strats blinking what can i do or what is wrong?

    my iphone 5 has stop working it turnd off and it wont turn on i connect it to the charger and the logo strats blinking but it wont turn on, what can i do or what is wrong

    First try a Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
    If no joy... Try a Restore...
    1: Connect the device to Your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
    From Here
    http://support.apple.com/kb/TS3281
    Make sure you have the Latest Version of iTunes (v11) Installed on your computer
    iTunes free download from www.itunes.com/download
    Note on Recovery Mode.
    You may need to try this More than Once... Be sure to Follow ALL the Steps...
    Once you have Recovered your Device...
    Re-Sync your Content or Restore from the most Recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • Hi, my Macbook Pro isn't charging when I plug in my charger and the light on the charger thing isn't lighting up. How can I tell if the charger or the computer is broken? Also, is there a way to fix it? Thanks.

    Hi, my Macbook Pro isn't charging when I plug in my charger and the light on the charger thing isn't lighting up. How can I tell if the charger or the computer is broken? Also, is there a way to fix it? Thanks.

    Not sure how I would tell if the contacts are stuck, but they look normal. The other stuff:
    Battery Information:
      Model Information:
      Serial Number:    W0046Q08UBX0A
      Manufacturer:    SMP
      Device name:    bq20z451
      Pack Lot Code:    0000
      PCB Lot Code:    0000
      Firmware Version:    0201
      Hardware Revision:    000a
      Cell Revision:    0157
      Charge Information:
      Charge remaining (mAh):    3211
      Fully charged:    No
      Charging:    No
      Full charge capacity (mAh):    5845
      Health Information:
      Cycle count:    943
      Condition:    Normal
      Battery Installed:    Yes
      Amperage (mA):    -1354
      Voltage (mV):    11210
    System Power Settings:
      AC Power:
      System Sleep Timer (Minutes):    10
      Disk Sleep Timer (Minutes):    10
      Display Sleep Timer (Minutes):    10
      Wake On AC Change:    No
      Wake On Clamshell Open:    Yes
      Wake On LAN:    Yes
      Display Sleep Uses Dim:    Yes
      GPUSwitch:    2
      Battery Power:
      System Sleep Timer (Minutes):    10
      Disk Sleep Timer (Minutes):    10
      Display Sleep Timer (Minutes):    2
      Wake On AC Change:    No
      Wake On Clamshell Open:    Yes
      Current Power Source:    Yes
      Display Sleep Uses Dim:    Yes
      GPUSwitch:    2
      Reduce Brightness:    Yes
    Hardware Configuration:
      UPS Installed:    No
    AC Charger Information:
      Connected:    No
      Charging:    No

  • On the initial set up for apple tv it just sits there trying to set the date and time . it is a wireless setup and the ipaddress and router address is correct . I can't get by this screen

    On the initial set up for apple tv it just sits there trying to set the date and time . it is a wireless setup and the ipaddress and router address is correct . I can't get by this screen. The setting is on automatic and I have picked a city in my time zone yet it still tries to set a time and date but fails.
    thanks

    Make sure router is up to date. Try ethernet to rule out any wifi issues. Reboot ATV and router.

  • HT1212 Is my screen supposed to change from the screen with the charger and the iTunes circle to my lock screen while it's in recovery mode?

    Is my screen supposed to change from the screen with the charger and the iTunes circle to my lock screen while it's in recovery mode?

    Is Find My Phone turned on, on your phone? If so, eject from iTunes, login to iCloud.com, locate your phone, then erase it.
    Does the same thing...removes the passcode. Then, either restore from backup, or setup as a new device.

  • I want to know what happens when the iPad battery gets fully charged and the charger is still connected

    When the battery gets fully charged, and the charger is still connected to the iPad, does the iPad use power from the battery or does it use the charger?

    Install Battery Doctor and see Battery Status or Charging
    http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
    System Status will indicate charged when charging circuit is disabled
    http://itunes.apple.com/sg/app/system-status-activity-manager/id401457165?mt=8&l s=1

  • Phone died and I put it on the charger and the red light keeps flashing.

    Phone died and I put it on the charger (wall charger) and the red light keeps flashing. It's been doing that for a little less than an hour, I pulled the batttery twice & get the same light flashing. I also read othe posts and it says to just let it charge for a few hours but i don't think it's gonna work. If you know anything about it let me know please & thank you.

    When connected to the charger, is the "no battery" symbol showing?
    Leave the device to charge 2-3 hours, and then, still connected to the USB cable, remove the the battery from the device a few seconds and reinsert it. If it boots--leave it to charge to 100% (check Options > Status for the percentage). If it doesn't reboot on the first attempt, leave it several more hours. I've had one charge for two days before it came back to life after an extreme battery depletion. Every 3-4 hours, with the device still connected to the charger, you can remove and replace the battery to see if it reboots.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • I have a Linksys WRV200 wireless router and the wireless signal is not working properly so I cannot connect to the internet wirelessly. the wireless light has a fast green blinking light. how can I fix the router?

    I have a Linksys WRV200 wireless router and the wireless signal is not working properly so I am unable to connect to the internet wirelessly.  The wireless light is blinking green very quickly and I connect and disconnect from the network constantly.  How do I get the router to work properly

    Hello James,
    The flashing WLAN light means activity (data getting transferred). Try disconnecting all your devices and check whether the light is still flashing or disconnect the router from internet and do the check.
    Do you have your SSID as linksys or the default one? If your neighbor has the same SSID, then traffic could result from your neighbor's one. Try changing your SSID and password. Make your security WPA/WPA2.
    Hope this helps,
    Thanks
    Vijay

Maybe you are looking for

  • How to display imaged documents on EP (.prop file name extension)

    Hello All Situation is, the business desires ability to display and optionally print multiple imaged invoices at one time. These images are stored on the Content Server as ".prop" files. On R/3 these files are displayed through the SD Viewer. Since t

  • Agentry Server Communications error (14)

    Hi All, We are trying to use WPF client for testing the application, but we were getting the below error message To resolve that we used the local certificate generated by using steps mentioned in the below link    http://infocenter.sybase.com/help/t

  • Moving playlists between hard drives

    I recently bought an external hard drive for my music. Moving the music was fine, but I lost ALL of my playlists! I see from the forums that this happens a lot - is there any way to get them back without entering them manually? Thank you!

  • Universal Data Server or SAP MII UDS 4.0 installation files

    Hello Guru I am new to SAP MII and trying to install and configure MII 12.0.12 on Maxdb.Win2k3 ,NW7 ...Where do i download the Universal Data Server or SAP MII UDS 4.0 installation files? thanks

  • The same condition type calculates different amount !

    Hi there, On the print out of an invoice (VF03) I have realized that two different rows at the end of the invoice with the same description (Min Freight Charge) display 2x different amount of freight, once I check the condition type, on the header le