Iphone5 with wrt542g wireless issue

hi all
Iphone5 with wrt542g wireless issue
when phone is on standby and you try to connect you have to enter the pass key every time you open the phone 
and by the way i have iphone 5 
remember that each time i open my iphone 5 i have to login with my wireless password
thanks 
regards 
raid
[email protected]

If in the event that the problem is with the router; try to upgrade the router’s firmware and then reset the router afterwards. Try also to isolate this problem by using another wireless device (like a laptop). In this way, you will be able to determine if the problem is really with the router or if it has something to do with your iphone.

Similar Messages

  • If you have a Blue Screen / Error due to Wireless issues (B110a), fix in here.

    For the original thread created by somebody else, please see here:
    http://h30434.www3.hp.com/t5/Printer-All-in-One-In​stall-and/B110a-network-connection-problem/m-p/319​...
    Here's a youtube video of what happened to me: http://www.youtube.com/watch?v=adE1kq36ld4
    I'm reposting it here so it can hopefully help some of you guys if anybody else stumbles across this. In short, my printer was fresh out of the box and I attempted to connect it to the wireless network. It would throw a blue screen on the LCD with an error of B8126AD6.
    I narrowed it down to an issue with DHCP. For some reason the printer connects to the wireless access point but as soon as it tries to get an IP address from the DHCP server it crashes with that blue screen and the error code in the first post above. This look like a massive bug in the printers firmware! For reference my router is a Billion 7401VGPR3 which is acting as my default gateway and DHCP server. I have a Linksys WRT54G as my Access Point for the house. 
    To solve it, I turned DHCP off on my router and then tried connecting the printer to the wireless network. This time it connects fine but you still can't talk to it because it doesn't have a proper IP address. If it still doesn't connect properly, try turning WPA/WPA2/WEP off on your Access Point. Leave it completely open for a moment until you can reach the web interface (as below). 
    To fix the IP issue, I then went into the Settings menu on the printer and printed the "HP Network Configuration Page". Note that under the Wireless menu option there are a couple of different "Print Network Test Page" options. I believe it's the 2nd one that I selected. You'll know you have the right one when it prints out the page with the following info:
    IPv4 IP Address
    Subnet Mask
    Hostname
    Default Gateway
    Primary DNS
    etc, etc.
    Take note of the IP Address from the printout above and the Subnet Mask. My IP was 169.254.73.5 and subnet mask 255.255.0.0. Now I manually configured my computers IP address to be similar (within the same subnet): 169.254.73.10 with the same subnet mask.
    Now you can load up the web interface of the printer using http://169.254.73.5 in my case. (You should also be able to ping the printer at this point too). In here you have a Network tab where you can now manually set the IP Address of the printer. Set the address you want it to be in your network (in my case 192.168.0.3 with a subnet mask of 255.255.255.0 and default gateway 192.168.0.1 and dns server 192.168.0.1).
    Once I clicked OK I changed my PC's IP back to normal, and I can now reach the printer on its IP address set above. YAY!
    The great thing is, in the web interface you get a million more options to play with. You can manually set the IP address, gateway, DNS, wireless settings such as WPA1/WPA2 AES/TKIP Encryption, WPA Passkey, etc. So if you had to set the Access Point to completely Open, setup the encryption again and put the passkey in here. When I did this I had to go back into the Settings menu on the printer LCD and select "Disable Wireless" then "Enable Wireless" to force it to re-join the network.
    Finally I went into the Settings menu again and Updated the software on the printer. I don't know if the new software fixes the bug or not - I haven't tested it (can't be bothered!).
    Hopefully this will help some of you guys out there too!
    EDIT: I've just stumbled across another couple of posts with similar results to mine:
    - http://h30434.www3.hp.com/t5/Printer-networking-an​d-wireless/How-to-install-Photosmart-B109n-z-on-a-​...
    - http://forums.techguy.org/networking/627989-hp-698​0-printer-wireless-problem.html

    Many thanks to gardz for an exhaustive overview on this critical problem with the B110a printer!
    I am happy to report that I have managed to set the printer to a static IP and am now able to connect to it wirelessly from my home computers, and also able to use the web apps and ePrint features on the printer. The printer shows the IP address and I am able to use the EWS (Embedded Web Server) to connect to its IP address from my PC's internet browser. The Wireless Network Test Report also showed no problems. I have also completed the Product Update on the printer, and there are no more pending updates now.
    However, the core wireless problem is still not satisfactorily resolved.
    I get the BSOD and blinking-lights error ("Please turn off printer and then on"), only if I start the printer when Wireless is enabled on the printer. If wireless is disabled prior to printer boot, there is no error. 
    The workaround I have adopted for now, is to always switch off the printer's wireless, before switching off the printer, and enabling the wireless setting only when I need to print/scan.
    Is this happening with anyone else? Why would the printer crash if it boots with wireless enabled? If it is already set to a static IP, why would it still conflict with the DHCP on the router?
    My router is perfectly working, it is in the same room as the printer, so the signal strength is good. The printer itself is quite stable except for this crash-after-boot-if-wireless-was-enabled issue on the printer.
    I made the mistake of connecting the USB cable to my primary computer before installing the printer drivers, so even the USB option is not working (Windows recognizes the printer as an unknown USB device). If anyone can point me to the printer drivers (inf files), I would be grateful. The CD does not have the driver files in a convenient location. It seems to be embedded within the setup package somewhere.
    Gardz and PrintDoc, I hope you can help us out on this one. I know many B110a users are struggling with the wireless issues, so HP needs to release a firmware fix and driver update soon. Wireless ought to work out-of-the-box, as this product is aimed at the SOHO users.

  • Wireless issue on Lenovo B570e2 with Atheros AR9285

    Hello,
    I have just bought a Lenovo B570e2 with an Atheros AR9285 wireless card and have from now lost two days trying to make it work. Since it works perfectly with Windows 7, it doesn't seem to be an hardware issue. The card is recognized and the ath9k module is loaded, but I cannot see any wireless network, whilst Windows 7 detects more than 10 at the same location.
    Here's some piece of information :
    dmesg:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.6.4-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMPT Mon Oct 29 09:49:00 CET 2012
    [ 0.000000] Command line: root=/dev/sda1 ro quiet initrd=/boot/initramfs-linux.img BOOT_IMAGE=/boot/vmlinuz-linux
    [ 0.000000] Disabled fast string operations
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bac86fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000bac87000-0x00000000baefefff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000baeff000-0x00000000baf9efff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000baf9f000-0x00000000baffefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000bafff000-0x00000000baffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000bb000000-0x00000000bf9fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fdfffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] DMI 2.6 present.
    [ 0.000000] DMI: LENOVO 521528G/Emerald Lake, BIOS 44CN43WW 10/27/2011
    [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x13fe00 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect
    [ 0.000000] 1 base 000000000 mask F80000000 write-back
    [ 0.000000] 2 base 080000000 mask FC0000000 write-back
    [ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable
    [ 0.000000] 4 base 0BB000000 mask FFF000000 uncachable
    [ 0.000000] 5 base 100000000 mask FC0000000 write-back
    [ 0.000000] 6 base 13FE00000 mask FFFE00000 uncachable
    [ 0.000000] 7 disabled
    [ 0.000000] 8 disabled
    [ 0.000000] 9 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: last_pfn = 0xbb000 max_arch_pfn = 0x400000000
    [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
    [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0xbaffffff]
    [ 0.000000] [mem 0x00000000-0xbaffffff] page 2M
    [ 0.000000] kernel direct mapping tables up to 0xbaffffff @ [mem 0x1fa24000-0x1fffffff]
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x13fdfffff]
    [ 0.000000] [mem 0x100000000-0x13fdfffff] page 2M
    [ 0.000000] kernel direct mapping tables up to 0x13fdfffff @ [mem 0xbac81000-0xbac86fff]
    [ 0.000000] RAMDISK: [mem 0x7fce4000-0x7fffefff]
    [ 0.000000] ACPI: RSDP 00000000000f0110 00024 (v02 LENOVO)
    [ 0.000000] ACPI: XSDT 00000000baffe120 00084 (v01 LENOVO CB-01 00000001 LENO 00000001)
    [ 0.000000] ACPI: FACP 00000000bafee000 000F4 (v03 LENOVO CB-01 00000001 PTL 00000001)
    [ 0.000000] ACPI: DSDT 00000000baff1000 09AC3 (v02 LENOVO SNB-CPT 00000000 INTL 20061109)
    [ 0.000000] ACPI: FACS 00000000baf3d000 00040
    [ 0.000000] ACPI: SLIC 00000000baffd000 00176 (v01 LENOVO CB-01 00000001 LENO 00000001)
    [ 0.000000] ACPI: SSDT 00000000baffb000 01068 (v01 LENOVO PtidDevc 00001000 INTL 20061109)
    [ 0.000000] ACPI: ASF! 00000000baff0000 000A5 (v32 LENOVO CB-01 00000001 PTL 00000001)
    [ 0.000000] ACPI: HPET 00000000bafed000 00038 (v01 LENOVO CB-01 00000001 PTL 00000001)
    [ 0.000000] ACPI: APIC 00000000bafec000 00098 (v01 LENOVO CB-01 00000001 PTL 00000001)
    [ 0.000000] ACPI: MCFG 00000000bafeb000 0003C (v01 LENOVO CB-01 00000001 PTL 00000001)
    [ 0.000000] ACPI: SSDT 00000000bafea000 0090C (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
    [ 0.000000] ACPI: SSDT 00000000bafe9000 00996 (v01 PmRef CpuPm 00003000 INTL 20061109)
    [ 0.000000] ACPI: UEFI 00000000bafe8000 0003E (v01 LENOVO CB-01 00000001 PTL 00000001)
    [ 0.000000] ACPI: UEFI 00000000bafe7000 00042 (v01 PTL COMBUF 00000001 PTL 00000001)
    [ 0.000000] ACPI: UEFI 00000000bafe6000 00256 (v01 LENOVO CB-01 00000001 PTL 00000001)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fdfffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fdfffff]
    [ 0.000000] NODE_DATA [mem 0x13fdfc000-0x13fdfffff]
    [ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b400000-ffff88013f3fffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00010000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x13fdfffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00010000-0x0009cfff]
    [ 0.000000] node 0: [mem 0x00100000-0xbac86fff]
    [ 0.000000] node 0: [mem 0xbafff000-0xbaffffff]
    [ 0.000000] node 0: [mem 0x100000000-0x13fdfffff]
    [ 0.000000] On node 0 totalpages: 1026581
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 6 pages reserved
    [ 0.000000] DMA zone: 3911 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 16320 pages used for memmap
    [ 0.000000] DMA32 zone: 744648 pages, LIFO batch:31
    [ 0.000000] Normal zone: 4088 pages used for memmap
    [ 0.000000] Normal zone: 257544 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
    [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    [ 0.000000] PM: Registered nosave memory: 00000000bac87000 - 00000000baeff000
    [ 0.000000] PM: Registered nosave memory: 00000000baeff000 - 00000000baf9f000
    [ 0.000000] PM: Registered nosave memory: 00000000baf9f000 - 00000000bafff000
    [ 0.000000] PM: Registered nosave memory: 00000000bb000000 - 00000000bfa00000
    [ 0.000000] PM: Registered nosave memory: 00000000bfa00000 - 00000000f8000000
    [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
    [ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
    [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
    [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed08000
    [ 0.000000] PM: Registered nosave memory: 00000000fed08000 - 00000000fed09000
    [ 0.000000] PM: Registered nosave memory: 00000000fed09000 - 00000000fed10000
    [ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
    [ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
    [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
    [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
    [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
    [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffd80000
    [ 0.000000] PM: Registered nosave memory: 00000000ffd80000 - 0000000100000000
    [ 0.000000] e820: [mem 0xbfa00000-0xf7ffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88013fa00000 s84608 r8192 d21888 u262144
    [ 0.000000] pcpu-alloc: s84608 r8192 d21888 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1006103
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: root=/dev/sda1 ro quiet initrd=/boot/initramfs-linux.img BOOT_IMAGE=/boot/vmlinuz-linux
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] __ex_table already sorted, skipping sort
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 3959408k/5240832k available (4726k kernel code, 1134508k absent, 146916k reserved, 4143k data, 768k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
    [ 0.000000] NR_IRQS:4352 nr_irqs:744 16
    [ 0.000000] Extended CMOS year: 2000
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 16777216 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.003333] tsc: Detected 2195.026 MHz processor
    [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4391.97 BogoMIPS (lpj=7316753)
    [ 0.000005] pid_max: default: 32768 minimum: 301
    [ 0.000035] Security Framework initialized
    [ 0.000039] AppArmor: AppArmor disabled by boot time parameter
    [ 0.000307] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.001323] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.001763] Mount-cache hash table entries: 256
    [ 0.001954] Initializing cgroup subsys cpuacct
    [ 0.001957] Initializing cgroup subsys memory
    [ 0.001964] Initializing cgroup subsys devices
    [ 0.001966] Initializing cgroup subsys freezer
    [ 0.001967] Initializing cgroup subsys net_cls
    [ 0.001968] Initializing cgroup subsys blkio
    [ 0.001992] Disabled fast string operations
    [ 0.001993] CPU: Physical Processor ID: 0
    [ 0.001994] CPU: Processor Core ID: 0
    [ 0.001999] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.002001] mce: CPU supports 7 MCE banks
    [ 0.002013] CPU0: Thermal monitoring enabled (TM1)
    [ 0.002019] process: using mwait in idle threads
    [ 0.002023] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
    Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
    tlb_flushall_shift is 0x5
    [ 0.002968] ACPI: Core revision 20120711
    [ 0.008307] ftrace: allocating 18347 entries in 72 pages
    [ 0.017888] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.050858] smpboot: CPU0: Intel(R) Core(TM) i3-2330M CPU @ 2.20GHz stepping 07
    [ 0.156195] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
    [ 0.156200] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
    [ 0.156202] ... version: 3
    [ 0.156203] ... bit width: 48
    [ 0.156204] ... generic registers: 4
    [ 0.156205] ... value mask: 0000ffffffffffff
    [ 0.156206] ... max period: 000000007fffffff
    [ 0.156206] ... fixed-purpose events: 3
    [ 0.156207] ... event mask: 000000070000000f
    [ 0.183036] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.207294] Disabled fast string operations
    [ 0.233924] Disabled fast string operations
    [ 0.257228] Disabled fast string operations
    [ 0.196175] smpboot: Booting Node 0, Processors #1 #2 #3
    [ 0.259393] Brought up 4 CPUs
    [ 0.259397] smpboot: Total of 4 processors activated (17567.88 BogoMIPS)
    [ 0.262873] devtmpfs: initialized
    [ 0.263822] PM: Registering ACPI NVS region [mem 0xbaeff000-0xbaf9efff] (655360 bytes)
    [ 0.264829] NET: Registered protocol family 16
    [ 0.264948] ACPI: bus type pci registered
    [ 0.265018] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 0.265020] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
    [ 0.270706] PCI: Using configuration type 1 for base access
    [ 0.271186] bio: create slab <bio-0> at 0
    [ 0.271237] ACPI: Added _OSI(Module Device)
    [ 0.271239] ACPI: Added _OSI(Processor Device)
    [ 0.271240] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.271241] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.272681] ACPI: EC: Look up EC in DSDT
    [ 0.274180] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.276653] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.277032] ACPI: SSDT 00000000baeef718 0067C (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
    [ 0.277400] ACPI: Dynamic OEM Table Load:
    [ 0.277402] ACPI: SSDT (null) 0067C (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
    [ 0.277643] ACPI: SSDT 00000000baef0a98 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
    [ 0.278038] ACPI: Dynamic OEM Table Load:
    [ 0.278040] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
    [ 0.278145] ACPI: SSDT 00000000baeeed98 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
    [ 0.278512] ACPI: Dynamic OEM Table Load:
    [ 0.278513] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
    [ 0.280983] ACPI: Interpreter enabled
    [ 0.280986] ACPI: (supports S0 S1 S3 S4 S5)
    [ 0.281006] ACPI: Using IOAPIC for interrupt routing
    [ 0.285986] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    [ 0.286145] ACPI: No dock devices found.
    [ 0.286149] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.286432] \_SB_.PCI0:_OSC invalid UUID
    [ 0.286433] _OSC request data:1 8 1f
    [ 0.286437] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
    [ 0.286920] PCI host bridge to bus 0000:00
    [ 0.286923] pci_bus 0000:00: busn_res: [bus 00-3e] is inserted under domain [bus 00-ff]
    [ 0.286925] pci_bus 0000:00: root bus resource [bus 00-3e]
    [ 0.286927] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.286928] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.286930] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.286931] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfeafffff]
    [ 0.286933] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
    [ 0.286941] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
    [ 0.286980] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
    [ 0.286991] pci 0000:00:02.0: reg 10: [mem 0xd0000000-0xd03fffff 64bit]
    [ 0.286997] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff 64bit pref]
    [ 0.287002] pci 0000:00:02.0: reg 20: [io 0x3000-0x303f]
    [ 0.287058] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
    [ 0.287082] pci 0000:00:16.0: reg 10: [mem 0xd0605000-0xd060500f 64bit]
    [ 0.287161] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 0.287198] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
    [ 0.287220] pci 0000:00:1a.0: reg 10: [mem 0xd060a000-0xd060a3ff]
    [ 0.287314] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 0.287342] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
    [ 0.287359] pci 0000:00:1b.0: reg 10: [mem 0xd0600000-0xd0603fff 64bit]
    [ 0.287430] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.287456] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
    [ 0.287538] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.287566] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
    [ 0.287649] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 0.287676] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
    [ 0.287758] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [ 0.287795] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
    [ 0.287817] pci 0000:00:1d.0: reg 10: [mem 0xd0609000-0xd06093ff]
    [ 0.287911] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 0.287939] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
    [ 0.288068] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
    [ 0.288088] pci 0000:00:1f.2: reg 10: [io 0x3088-0x308f]
    [ 0.288096] pci 0000:00:1f.2: reg 14: [io 0x3094-0x3097]
    [ 0.288104] pci 0000:00:1f.2: reg 18: [io 0x3080-0x3087]
    [ 0.288113] pci 0000:00:1f.2: reg 1c: [io 0x3090-0x3093]
    [ 0.288121] pci 0000:00:1f.2: reg 20: [io 0x3060-0x307f]
    [ 0.288130] pci 0000:00:1f.2: reg 24: [mem 0xd0608000-0xd06087ff]
    [ 0.288177] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.288197] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
    [ 0.288213] pci 0000:00:1f.3: reg 10: [mem 0xd0604000-0xd06040ff 64bit]
    [ 0.288235] pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf]
    [ 0.288311] pci_bus 0000:01: busn_res: [bus 01] is inserted under [bus 00-3e]
    [ 0.288315] pci 0000:00:1c.0: PCI bridge to [bus 01]
    [ 0.288369] pci_bus 0000:02: busn_res: [bus 02] is inserted under [bus 00-3e]
    [ 0.288414] pci 0000:02:00.0: [168c:002b] type 00 class 0x028000
    [ 0.288462] pci 0000:02:00.0: reg 10: [mem 0xd0500000-0xd050ffff 64bit]
    [ 0.288689] pci 0000:02:00.0: supports D1
    [ 0.288691] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
    [ 0.292742] pci 0000:00:1c.1: PCI bridge to [bus 02]
    [ 0.292756] pci 0000:00:1c.1: bridge window [mem 0xd0500000-0xd05fffff]
    [ 0.292853] pci_bus 0000:03: busn_res: [bus 03] is inserted under [bus 00-3e]
    [ 0.292937] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
    [ 0.293001] pci 0000:03:00.0: reg 10: [io 0x2000-0x20ff]
    [ 0.293121] pci 0000:03:00.0: reg 18: [mem 0xd0404000-0xd0404fff 64bit pref]
    [ 0.293190] pci 0000:03:00.0: reg 20: [mem 0xd0400000-0xd0403fff 64bit pref]
    [ 0.293518] pci 0000:03:00.0: supports D1 D2
    [ 0.293519] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.299419] pci 0000:00:1c.3: PCI bridge to [bus 03]
    [ 0.299429] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
    [ 0.299447] pci 0000:00:1c.3: bridge window [mem 0xd0400000-0xd04fffff 64bit pref]
    [ 0.299495] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.299582] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
    [ 0.299608] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
    [ 0.299634] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
    [ 0.299708] \_SB_.PCI0:_OSC invalid UUID
    [ 0.299709] _OSC request data:1 1f 1f
    [ 0.299713] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
    [ 0.299714] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
    [ 0.301874] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
    [ 0.301916] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *10 11 12 14 15)
    [ 0.301957] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15)
    [ 0.301996] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 *11 12 14 15)
    [ 0.302035] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.302077] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.302116] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
    [ 0.302155] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *10 11 12 14 15)
    [ 0.302235] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.302239] vgaarb: loaded
    [ 0.302240] vgaarb: bridge control possible 0000:00:02.0
    [ 0.302270] PCI: Using ACPI for IRQ routing
    [ 0.303860] PCI: pci_cache_line_size set to 64 bytes
    [ 0.303938] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
    [ 0.303939] e820: reserve RAM buffer [mem 0xbac87000-0xbbffffff]
    [ 0.303941] e820: reserve RAM buffer [mem 0xbb000000-0xbbffffff]
    [ 0.303942] e820: reserve RAM buffer [mem 0x13fe00000-0x13fffffff]
    [ 0.304024] NetLabel: Initializing
    [ 0.304026] NetLabel: domain hash size = 128
    [ 0.304026] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.304038] NetLabel: unlabeled traffic allowed by default
    [ 0.304054] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 0.304059] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 0.306072] Switching to clocksource hpet
    [ 0.310888] pnp: PnP ACPI init
    [ 0.310905] ACPI: bus type pnp registered
    [ 0.311180] pnp 00:00: [bus 00-3e]
    [ 0.311182] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 0.311184] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 0.311186] pnp 00:00: [io 0x0d00-0xffff window]
    [ 0.311187] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 0.311189] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
    [ 0.311190] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
    [ 0.311192] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
    [ 0.311193] pnp 00:00: [mem 0x000cc000-0x000cffff window]
    [ 0.311194] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
    [ 0.311196] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
    [ 0.311197] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
    [ 0.311199] pnp 00:00: [mem 0x000dc000-0x000dffff window]
    [ 0.311200] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
    [ 0.311202] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
    [ 0.311203] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
    [ 0.311204] pnp 00:00: [mem 0x000ec000-0x000effff window]
    [ 0.311206] pnp 00:00: [mem 0x000f0000-0x000fffff window]
    [ 0.311207] pnp 00:00: [mem 0xbfa00000-0xfeafffff window]
    [ 0.311209] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
    [ 0.311269] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [ 0.311280] pnp 00:01: [io 0x0000-0x001f]
    [ 0.311284] pnp 00:01: [io 0x0081-0x0091]
    [ 0.311285] pnp 00:01: [io 0x0093-0x009f]
    [ 0.311286] pnp 00:01: [io 0x00c0-0x00df]
    [ 0.311288] pnp 00:01: [dma 4]
    [ 0.311307] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.311314] pnp 00:02: [mem 0xff000000-0xffffffff]
    [ 0.311330] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
    [ 0.311394] pnp 00:03: [mem 0xfed00000-0xfed003ff]
    [ 0.311413] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.311421] pnp 00:04: [io 0x00f0]
    [ 0.311431] pnp 00:04: [irq 13]
    [ 0.311448] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.311457] pnp 00:05: [io 0x002e-0x002f]
    [ 0.311458] pnp 00:05: [io 0x004e-0x004f]
    [ 0.311459] pnp 00:05: [io 0x0061]
    [ 0.311460] pnp 00:05: [io 0x0063]
    [ 0.311461] pnp 00:05: [io 0x0065]
    [ 0.311463] pnp 00:05: [io 0x0067]
    [ 0.311464] pnp 00:05: [io 0x0070]
    [ 0.311465] pnp 00:05: [io 0x0080]
    [ 0.311466] pnp 00:05: [io 0x0092]
    [ 0.311467] pnp 00:05: [io 0x00b2-0x00b3]
    [ 0.311469] pnp 00:05: [io 0x1000-0x100f]
    [ 0.311470] pnp 00:05: [io 0xffff]
    [ 0.311471] pnp 00:05: [io 0xffff]
    [ 0.311472] pnp 00:05: [io 0x0400-0x0453]
    [ 0.311473] pnp 00:05: [io 0x0458-0x047f]
    [ 0.311475] pnp 00:05: [io 0x0500-0x057f]
    [ 0.311476] pnp 00:05: [io 0x0068-0x006f]
    [ 0.311477] pnp 00:05: [mem 0xfe800000-0xfe80ffff]
    [ 0.311515] system 00:05: [io 0x1000-0x100f] has been reserved
    [ 0.311517] system 00:05: [io 0xffff] has been reserved
    [ 0.311518] system 00:05: [io 0xffff] has been reserved
    [ 0.311521] system 00:05: [io 0x0400-0x0453] has been reserved
    [ 0.311522] system 00:05: [io 0x0458-0x047f] has been reserved
    [ 0.311524] system 00:05: [io 0x0500-0x057f] has been reserved
    [ 0.311526] system 00:05: [mem 0xfe800000-0xfe80ffff] has been reserved
    [ 0.311529] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.311536] pnp 00:06: [io 0x0070-0x0077]
    [ 0.311541] pnp 00:06: [irq 8]
    [ 0.311560] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.311581] pnp 00:07: [io 0x0454-0x0457]
    [ 0.311608] system 00:07: [io 0x0454-0x0457] has been reserved
    [ 0.311611] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 0.311657] pnp 00:08: [io 0x0060]
    [ 0.311658] pnp 00:08: [io 0x0064]
    [ 0.311663] pnp 00:08: [irq 1]
    [ 0.311684] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 0.311694] pnp 00:09: [irq 12]
    [ 0.311714] pnp 00:09: Plug and Play ACPI device, IDs ETD0604 ETD0001 ETD0002 PNP0f13 (active)
    [ 0.311798] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
    [ 0.311799] pnp 00:0a: [mem 0xfed10000-0xfed17fff]
    [ 0.311801] pnp 00:0a: [mem 0xfed18000-0xfed18fff]
    [ 0.311802] pnp 00:0a: [mem 0xfed19000-0xfed19fff]
    [ 0.311803] pnp 00:0a: [mem 0xf8000000-0xfbffffff]
    [ 0.311805] pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
    [ 0.311806] pnp 00:0a: [mem 0xfed90000-0xfed93fff]
    [ 0.311807] pnp 00:0a: [mem 0xfed45000-0xfed8ffff]
    [ 0.311809] pnp 00:0a: [mem 0xff000000-0xffffffff]
    [ 0.311810] pnp 00:0a: [mem 0xfee00000-0xfeefffff]
    [ 0.311813] pnp 00:0a: [mem 0xbfa00000-0xbfa00fff]
    [ 0.311845] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.311847] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
    [ 0.311849] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.311851] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.311852] system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved
    [ 0.311854] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.311856] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
    [ 0.311857] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 0.311859] system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved
    [ 0.311861] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 0.311862] system 00:0a: [mem 0xbfa00000-0xbfa00fff] has been reserved
    [ 0.311865] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.312038] pnp 00:0b: [mem 0x20000000-0x201fffff]
    [ 0.312039] pnp 00:0b: [mem 0x40000000-0x401fffff]
    [ 0.312083] system 00:0b: [mem 0x20000000-0x201fffff] could not be reserved
    [ 0.312085] system 00:0b: [mem 0x40000000-0x401fffff] could not be reserved
    [ 0.312087] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.312104] pnp: PnP ACPI: found 12 devices
    [ 0.312105] ACPI: ACPI bus type pnp unregistered
    [ 0.318657] pci 0000:00:1c.0: PCI bridge to [bus 01]
    [ 0.318670] pci 0000:00:1c.1: PCI bridge to [bus 02]
    [ 0.318676] pci 0000:00:1c.1: bridge window [mem 0xd0500000-0xd05fffff]
    [ 0.318685] pci 0000:00:1c.3: PCI bridge to [bus 03]
    [ 0.318687] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
    [ 0.318695] pci 0000:00:1c.3: bridge window [mem 0xd0400000-0xd04fffff 64bit pref]
    [ 0.318731] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.318732] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.318734] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.318736] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfeafffff]
    [ 0.318737] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
    [ 0.318739] pci_bus 0000:02: resource 1 [mem 0xd0500000-0xd05fffff]
    [ 0.318741] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
    [ 0.318742] pci_bus 0000:03: resource 2 [mem 0xd0400000-0xd04fffff 64bit pref]
    [ 0.318772] NET: Registered protocol family 2
    [ 0.319365] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    [ 0.321068] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.321286] TCP: Hash tables configured (established 524288 bind 65536)
    [ 0.321317] TCP: reno registered
    [ 0.321326] UDP hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.321345] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.321428] NET: Registered protocol family 1
    [ 0.321440] pci 0000:00:02.0: Boot video device
    [ 0.321554] PCI: CLS 64 bytes, default 64
    [ 0.321595] Unpacking initramfs...
    [ 0.383826] Freeing initrd memory: 3180k freed
    [ 0.384495] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 0.384501] software IO TLB [mem 0xb6c81000-0xbac80fff] (64MB) mapped at [ffff8800b6c81000-ffff8800bac80fff]
    [ 0.384874] audit: initializing netlink socket (disabled)
    [ 0.384885] type=2000 audit(1351894392.276:1): initialized
    [ 0.396624] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.398149] VFS: Disk quotas dquot_6.5.2
    [ 0.398190] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.398317] msgmni has been set to 7739
    [ 0.398512] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.398542] io scheduler noop registered
    [ 0.398544] io scheduler deadline registered
    [ 0.398590] io scheduler cfq registered (default)
    [ 0.398854] intel_idle: MWAIT substates: 0x21120
    [ 0.398856] intel_idle: v0.4 model 0x2A
    [ 0.398857] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 0.398892] GHES: HEST is not enabled!
    [ 0.398939] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.399351] Linux agpgart interface v0.103
    [ 0.399430] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [ 0.401557] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.401581] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.401673] mousedev: PS/2 mouse device common for all mice
    [ 0.401722] rtc_cmos 00:06: RTC can wake from S4
    [ 0.401852] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
    [ 0.401879] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 0.401957] cpuidle: using governor ladder
    [ 0.402055] cpuidle: using governor menu
    [ 0.402159] drop_monitor: Initializing network drop monitor service
    [ 0.402222] TCP: cubic registered
    [ 0.402309] NET: Registered protocol family 10
    [ 0.402438] NET: Registered protocol family 17
    [ 0.402447] Key type dns_resolver registered
    [ 0.402714] PM: Hibernation image not present or could not be loaded.
    [ 0.402725] registered taskstats version 1
    [ 0.403232] rtc_cmos 00:06: setting system clock to 2012-11-02 22:13:13 UTC (1351894393)
    [ 0.404422] Freeing unused kernel memory: 768k freed
    [ 0.404561] Write protecting the kernel read-only data: 8192k
    [ 0.408327] Freeing unused kernel memory: 1408k freed
    [ 0.410095] Freeing unused kernel memory: 568k freed
    [ 0.416116] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 0.417653] systemd-udevd[53]: starting version 195
    [ 0.420384] [drm] Initialized drm 1.1.0 20060810
    [ 0.421402] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
    [ 0.439546] ACPI: Lid Switch [LID0]
    [ 0.439618] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
    [ 0.439623] ACPI: Sleep Button [SLPB]
    [ 0.439660] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    [ 0.439663] ACPI: Power Button [PWRF]
    [ 0.443071] pci 0000:00:00.0: Intel Sandybridge Chipset
    [ 0.443173] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
    [ 0.444147] pci 0000:00:00.0: detected 65536K stolen memory
    [ 0.444222] i915 0000:00:02.0: setting latency timer to 64
    [ 0.473062] i915 0000:00:02.0: irq 40 for MSI/MSI-X
    [ 0.473086] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 0.473087] [drm] Driver supports precise vblank timestamp query.
    [ 0.473128] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [ 1.004237] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
    [ 1.122764] fbcon: inteldrmfb (fb0) is primary device
    [ 1.385010] tsc: Refined TSC clocksource calibration: 2195.014 MHz
    [ 1.385020] Switching to clocksource tsc
    [ 1.470871] Console: switching to colour frame buffer device 170x48
    [ 1.473442] fb0: inteldrmfb frame buffer device
    [ 1.473444] drm: registered panic notifier
    [ 1.476764] ACPI Error: Current brightness invalid (20120711/video-376)
    [ 1.476897] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    [ 1.476953] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input4
    [ 1.476972] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 1.478563] cfg80211: Calling CRDA to update world regulatory domain
    [ 1.536490] ath: phy0: ASPM enabled: 0x43
    [ 1.536493] ath: EEPROM regdomain: 0x65
    [ 1.536494] ath: EEPROM indicates we should expect a direct regpair map
    [ 1.536496] ath: Country alpha2 being used: 00
    [ 1.536497] ath: Regpair used: 0x65
    [ 1.539371] ieee80211 phy0: Failed to initialize wep: -2
    [ 1.539378] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
    [ 1.539571] Registered led device: ath9k-phy0
    [ 1.539577] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90004fa0000, irq=17
    [ 1.573762] SCSI subsystem initialized
    [ 1.575180] ACPI: bus type scsi registered
    [ 1.575316] libata version 3.00 loaded.
    [ 1.575918] ahci 0000:00:1f.2: version 3.0
    [ 1.575985] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
    [ 1.576019] ahci: SSS flag set, parallel bus scan disabled
    [ 1.588070] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x39 impl SATA mode
    [ 1.588076] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
    [ 1.588084] ahci 0000:00:1f.2: setting latency timer to 64
    [ 1.608933] scsi0 : ahci
    [ 1.609057] scsi1 : ahci
    [ 1.609163] scsi2 : ahci
    [ 1.609268] scsi3 : ahci
    [ 1.609399] scsi4 : ahci
    [ 1.609505] scsi5 : ahci
    [ 1.609561] ata1: SATA max UDMA/133 abar m2048@0xd0608000 port 0xd0608100 irq 41
    [ 1.609563] ata2: DUMMY
    [ 1.609565] ata3: DUMMY
    [ 1.609568] ata4: SATA max UDMA/133 abar m2048@0xd0608000 port 0xd0608280 irq 41
    [ 1.609572] ata5: SATA max UDMA/133 abar m2048@0xd0608000 port 0xd0608300 irq 41
    [ 1.609575] ata6: SATA max UDMA/133 abar m2048@0xd0608000 port 0xd0608380 irq 41
    [ 1.927764] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 1.929028] ata1.00: ATA-8: HITACHI HTS547550A9E384, JE3ZD60D, max UDMA/100
    [ 1.929038] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 1.930360] ata1.00: configured for UDMA/100
    [ 1.930642] scsi 0:0:0:0: Direct-Access ATA HITACHI HTS54755 JE3Z PQ: 0 ANSI: 5
    [ 2.247409] ata4: SATA link down (SStatus 0 SControl 300)
    [ 2.567065] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 2.568952] ata5.00: ATAPI: Optiarc DVD RW AD-7740H, A842, max UDMA/100
    [ 2.571103] ata5.00: configured for UDMA/100
    [ 2.572267] scsi 4:0:0:0: CD-ROM Optiarc DVD RW AD-7740H A842 PQ: 0 ANSI: 5
    [ 2.890037] ata6: SATA link down (SStatus 0 SControl 300)
    [ 2.894144] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    [ 2.894147] sd 0:0:0:0: [sda] 4096-byte physical blocks
    [ 2.894185] sd 0:0:0:0: [sda] Write Protect is off
    [ 2.894188] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2.894203] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.931438] sda: sda1
    [ 2.931700] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 3.193708] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [ 3.899480] systemd[1]: systemd 195 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ; arch)
    [ 3.919422] systemd[1]: Set hostname to <smodbox>.
    [ 4.173877] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
    [ 4.174035] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 4.174089] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 4.174102] systemd[1]: Starting Remote File Systems.
    [ 4.174113] systemd[1]: Reached target Remote File Systems.
    [ 4.174121] systemd[1]: Starting Delayed Shutdown Socket.
    [ 4.174148] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 4.174156] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 4.174176] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 4.174187] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    [ 4.174214] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    [ 4.174241] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    [ 4.174331] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [ 4.174340] systemd[1]: Starting Encrypted Volumes.
    [ 4.174350] systemd[1]: Reached target Encrypted Volumes.
    [ 4.174404] systemd[1]: Starting udev Kernel Socket.
    [ 4.174425] systemd[1]: Listening on udev Kernel Socket.
    [ 4.174467] systemd[1]: Starting udev Control Socket.
    [ 4.174489] systemd[1]: Listening on udev Control Socket.
    [ 4.174498] systemd[1]: Starting Swap.
    [ 4.174506] systemd[1]: Reached target Swap.
    [ 4.174514] systemd[1]: Starting Journal Socket.
    [ 4.174557] systemd[1]: Listening on Journal Socket.
    [ 4.174571] systemd[1]: Starting File System Check on Root Device...
    [ 4.178969] systemd[1]: Starting udev Kernel Device Manager...
    [ 4.183204] systemd[1]: Mounting POSIX Message Queue File System...
    [ 4.188717] systemd[1]: Mounting Debug File System...
    [ 4.222145] systemd[1]: Starting udev Coldplug all Devices...
    [ 4.321880] systemd[1]: Started Load Kernel Modules.
    [ 4.321916] systemd[1]: Mounted Configuration File System.
    [ 4.321928] systemd[1]: Starting Setup Virtual Console...
    [ 4.342077] systemd[1]: Mounting Huge Pages File System...
    [ 4.362793] systemd-udevd[122]: starting version 195
    [ 4.408386] systemd[1]: Started Set Up Additional Binary Formats.
    [ 4.408428] systemd[1]: Mounted FUSE Control File System.
    [ 4.475271] systemd[1]: Starting Apply Kernel Variables...
    [ 4.482124] systemd[1]: Starting Journal Service...
    [ 4.515222] systemd[1]: Started Journal Service.
    [ 5.146383] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x1b
    [ 5.157730] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x1b
    [ 5.158091] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x1b
    [ 5.158405] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x1b
    [ 5.158792] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 5.464259] thermal LNXTHERM:00: registered as thermal_zone0
    [ 5.464264] ACPI: Thermal Zone [TZS0] (49 C)
    [ 5.464411] thermal LNXTHERM:01: registered as thermal_zone1
    [ 5.464413] ACPI: Thermal Zone [TZS1] (39 C)
    [ 5.486141] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120711/utaddress-251)
    [ 5.486149] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 5.486152] ACPI Warning: 0x0000000000000500-0x000000000000057f SystemIO conflicts with Region \GPIO 1 (20120711/utaddress-251)
    [ 5.486155] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 5.486157] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [ 5.519436] wmi: Mapper loaded
    [ 5.623555] ACPI Warning: 0x000000000000efa0-0x000000000000efbf SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120711/utaddress-251)
    [ 5.623563] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 5.629718] ACPI: Battery Slot [BAT0] (battery present)
    [ 5.631456] ACPI: AC Adapter [ADP1] (off-line)
    [ 5.787874] ACPI: Requesting acpi_cpufreq
    [ 6.178964] input: PC Speaker as /devices/platform/pcspkr/input/input5
    [ 6.239273] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X
    [ 6.266513] EXT4-fs (sda1): re-mounted. Opts: (null)
    [ 6.377140] iTCO_vendor_support: vendor-support=0
    [ 6.377719] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
    [ 6.377763] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
    [ 6.377859] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 6.387946] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 6.387954] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 6.388168] sr 4:0:0:0: Attached scsi CD-ROM sr0
    [ 6.484585] input: Ideapad extra buttons as /devices/platform/ideapad/input/input6
    [ 6.592622] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 6.593023] r8169 0000:03:00.0: irq 43 for MSI/MSI-X
    [ 6.593226] r8169 0000:03:00.0: eth0: RTL8168e/8111e at 0xffffc9000067e000, 3c:97:0e:06:17:d3, XID 0c200000 IRQ 43
    [ 6.593229] r8169 0000:03:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
    [ 6.682383] ACPI: bus type usb registered
    [ 6.682468] usbcore: registered new interface driver usbfs
    [ 6.682488] usbcore: registered new interface driver hub
    [ 6.682533] usbcore: registered new device driver usb
    [ 6.719033] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 6.766701] systemd-journald[130]: Received SIGUSR1
    [ 6.794142] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
    [ 6.841226] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
    [ 6.841359] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
    [ 6.841452] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
    [ 6.841780] mei 0000:00:16.0: setting latency timer to 64
    [ 6.841864] mei 0000:00:16.0: irq 44 for MSI/MSI-X
    [ 6.847693] ehci_hcd 0000:00:1a.0: setting latency timer to 64
    [ 6.847699] ehci_hcd 0000:00:1a.0: EHCI Host Controller
    [ 6.847706] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 6.851604] ehci_hcd 0000:00:1a.0: debug port 2
    [ 6.851617] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
    [ 6.851643] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xd060a000
    [ 6.853281] mei 0000:00:16.0: wd: failed to find the client
    [ 6.858964] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 6.859314] hub 1-0:1.0: USB hub found
    [ 6.859326] hub 1-0:1.0: 2 ports detected
    [ 6.859441] ehci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 6.859445] ehci_hcd 0000:00:1d.0: EHCI Host Controller
    [ 6.859450] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 6.863362] ehci_hcd 0000:00:1d.0: debug port 2
    [ 6.863372] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
    [ 6.863391] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xd0609000
    [ 6.872239] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 6.872624] hub 2-0:1.0: USB hub found
    [ 6.872628] hub 2-0:1.0: 2 ports detected
    [ 6.978047] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x850f03)
    [ 6.987300] systemd-journald[130]: File /var/log/journal/4ebb175d5bb0410e8001e911aa4a071a/system.journal corrupted or uncleanly shut down, renaming and replacing.
    [ 6.989505] psmouse serio1: elantech: Synaptics capabilities query result 0x18, 0x14, 0x0a.
    [ 7.048723] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input11
    [ 7.165352] usb 1-1: new high-speed USB device number 2 using ehci_hcd
    [ 7.290024] hub 1-1:1.0: USB hub found
    [ 7.290212] hub 1-1:1.0: 6 ports detected
    [ 7.395087] usb 2-1: new high-speed USB device number 2 using ehci_hcd
    [ 7.519661] hub 2-1:1.0: USB hub found
    [ 7.519888] hub 2-1:1.0: 6 ports detected
    [ 7.598472] usb 1-1.5: new high-speed USB device number 3 using ehci_hcd
    [ 7.775465] Linux media interface: v0.10
    [ 7.784857] usb 2-1.6: new high-speed USB device number 3 using ehci_hcd
    [ 7.789661] Linux video capture interface: v2.00
    [ 7.814706] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (04f2:b272)
    [ 7.816751] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input12
    [ 7.816870] usbcore: registered new interface driver uvcvideo
    [ 7.816872] USB Video Class driver (1.1.1)
    [ 7.894295] rts5139: module is from the staging directory, the quality is unknown, you have been warned.
    [ 7.899095] scsi6 : SCSI emulation for RTS5139 USB card reader
    [ 7.899332] scsi 6:0:0:0: Direct-Access Generic- xD/SD/M.S. 1.00 PQ: 0 ANSI: 0 CCS
    [ 7.901794] sd 6:0:0:0: [sdb] Attached SCSI removable disk
    [ 7.904683] usbcore: registered new interface driver rts5139
    [ 12.525163] ACPI Error: [OPST] Namespace lookup failure, AE_NOT_FOUND (20120711/psargs-359)
    [ 12.525181] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q14] (Node ffff880139a55b68), AE_NOT_FOUND (20120711/psparse-536)
    [ 36.203724] usb 2-1.2: new high-speed USB device number 4 using ehci_hcd
    [ 36.337496] usbcore: registered new interface driver uas
    [ 36.342840] Initializing USB Mass Storage driver...
    [ 36.343084] scsi7 : usb-storage 2-1.2:1.0
    [ 36.343408] usbcore: registered new interface driver usb-storage
    [ 36.343410] USB Mass Storage support registered.
    [ 37.385077] scsi 7:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 0 CCS
    [ 39.169203] sd 7:0:0:0: [sdc] 7643136 512-byte logical blocks: (3.91 GB/3.64 GiB)
    [ 39.169756] sd 7:0:0:0: [sdc] Write Protect is off
    [ 39.169763] sd 7:0:0:0: [sdc] Mode Sense: 23 00 00 00
    [ 39.170592] sd 7:0:0:0: [sdc] No Caching mode page present
    [ 39.174197] sd 7:0:0:0: [sdc] Assuming drive cache: write through
    [ 39.182319] sd 7:0:0:0: [sdc] No Caching mode page present
    [ 39.185332] sd 7:0:0:0: [sdc] Assuming drive cache: write through
    [ 39.223477] sdc: sdc1
    [ 39.226302] sd 7:0:0:0: [sdc] No Caching mode page present
    [ 39.229369] sd 7:0:0:0: [sdc] Assuming drive cache: write through
    [ 39.232367] sd 7:0:0:0: [sdc] Attached SCSI removable disk
    [ 61.295014] ACPI Error: [OPST] Namespace lookup failure, AE_NOT_FOUND (20120711/psargs-359)
    [ 61.295034] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q14] (Node ffff880139a55b68), AE_NOT_FOUND (20120711/psparse-536)
    lspci -vv:
    00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
    Subsystem: Lenovo Device 3975
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
    Latency: 0
    Capabilities: [e0] Vendor Specific Information: Len=0c <?>
    00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller])
    Subsystem: Lenovo Device 3975
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 40
    Region 0: Memory at d0000000 (64-bit, non-prefetchable) [size=4M]
    Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M]
    Region 4: I/O ports at 3000 [size=64]
    Expansion ROM at <unassigned> [disabled]
    Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
    Address: fee0f00c Data: 4181
    Capabilities: [d0] Power Management version 2
    Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [a4] PCI Advanced Features
    AFCap: TP+ FLR+
    AFCtrl: FLR-
    AFStatus: TP-
    Kernel driver in use: i915
    00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
    Subsystem: Lenovo Device 3975
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 44
    Region 0: Memory at d0605000 (64-bit, non-prefetchable) [size=16]
    Capabilities: [50] Power Management version 3
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
    Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [8c] MSI: Enable+ Count=1/1 Maskable- 64bit+
    Address: 00000000fee0f00c Data: 41e1
    Kernel driver in use: mei
    00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) (prog-if 20 [EHCI])
    Subsystem: Lenovo Device 3975
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 16
    Region 0: Memory at d060a000 (32-bit, non-prefetchable) [size=1K]
    Capabilities: [50] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
    Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [58] Debug port: BAR=1 offset=00a0
    Capabilities: [98] PCI Advanced Features
    AFCap: TP+ FLR+
    AFCtrl: FLR-
    AFStatus: TP-
    Kernel driver in use: ehci_hcd
    00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)
    Subsystem: Lenovo Device 3975
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 42
    Region 0: Memory at d0600000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: [50] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
    Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
    Address: 00000000fee0f00c Data: 41c1
    Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
    DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
    ExtTag- RBE- FLReset+
    DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
    RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
    MaxPayload 128 bytes, MaxReadReq 128 bytes
    DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
    LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
    ClockPM- Surprise- LLActRep- BwNot-
    LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
    ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
    LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
    Capabilities: [100 v1] Virtual Channel
    Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
    Arb: Fixed- WRR32- WRR64- WRR128-
    Ctrl: ArbSelect=Fixed
    Status: InProgress-
    VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
    Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
    Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
    Status: NegoPending- InProgress-
    VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
    Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
    Ctrl: Enable+ ID=1 ArbSelect=Fixed TC/VC=22
    Status: NegoPending- InProgress-
    Capabilities: [130 v1] Root Complex Link
    Desc: PortNumber=0f ComponentID=00 EltType=Config
    Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB- LinkType=MemMapped LinkValid+
    Addr: 00000000fed1c000
    Kernel driver in use: snd_hda_intel
    00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) (prog-if 00 [Normal decode])
    Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
    BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
    PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
    DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
    ExtTag- RBE+ FLReset-
    DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
    RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
    MaxPayload 128 bytes, MaxReadReq 128 bytes
    DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
    LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <16us
    ClockPM- Surprise- LLActRep+ BwNot-
    LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk-
    ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
    LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
    SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
    Slot #0, PowerLimit 10.000W; Interlock- NoCompl+
    SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
    Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
    SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
    Changed: MRL- PresDet- LinkState-
    RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
    RootCap: CRSVisible-
    RootSta: PME ReqID 0000, PMEStatus- PMEPending-
    DevCap2: Completion Timeout: Range BC, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd-
    DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
    LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
    Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
    Compliance De-emphasis: -6dB
    LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
    EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
    Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
    Address: 00000000 Data: 0000
    Capabilities: [90] Subsystem: Lenovo Device 3975
    Capabilities: [a0] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
    Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Kernel driver in use: pcieport
    00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
    Memory behind bridge: d0500000-d05fffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
    PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
    DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
    ExtTag- RBE+ FLReset-
    DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
    RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
    MaxPayload 128 bytes, MaxReadReq 128 bytes
    DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
    LnkCap: Port #2, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <16us
    ClockPM- Surprise- LLActRep+ BwNot-
    LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
    ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
    LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
    SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
    Slot #1, PowerLimit 10.000W; Interlock- NoCompl+
    SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
    Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
    SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
    Changed: MRL- PresDet- LinkState+
    RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
    RootCap: CRSVisible-
    RootSta: PME ReqID 0000, PMEStatus- PMEPending-
    DevCap2: Completion Timeout: Range BC, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd-
    DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
    LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
    Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
    Compliance De-emphasis: -6dB
    LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
    EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
    Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
    Address: 00000000 Data: 0000
    Capabilities: [90] Subsystem: Lenovo Device 3975
    Capabilities: [a0] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
    Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Kernel driver in use: pcieport
    00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
    I/O behind bridge: 00002000-00002fff
    Prefetchable memory behind bridge: 00000000d0400000-00000000d04fffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
    PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
    DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
    ExtTag- RBE+ FLReset-
    DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
    RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
    MaxPayload 128 bytes, MaxReadReq 128 bytes
    DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
    LnkCap: Port #4, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <16us
    ClockPM- Surprise- LLActRep+ BwNot-
    LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
    ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
    LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
    SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
    Slot #3, PowerLimit 10.000W; Interlock- NoCompl+
    SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
    Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
    SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
    Changed: MRL- PresDet- LinkState+
    RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
    RootCap: CRSVisible-
    RootSta: PME ReqID 0000, PMEStatus- PMEPending-
    DevCap2: Completion Timeout: Range BC, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd-
    DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
    LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
    Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
    Compliance De-emphasis: -6dB
    LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
    EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
    Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
    Address: 00000000 Data: 0000
    Capabilities: [90] Subsystem: Lenovo Device 3975
    Capabilities: [a0] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
    Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Kernel driver in use: pcieport
    00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) (prog-if 20 [EHCI])
    Subsystem: Lenovo Device 3975
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 23
    Region 0: Memory at d0609000 (32-bit, non-prefetchable) [size=1K]
    Capabilities: [50] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
    Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [58] Debug port: BAR=1 offset=00a0
    Capabilities: [98] PCI Advanced Features
    AFCap: TP+ FLR+
    AFCtrl: FLR-
    AFStatus: TP-
    Kernel driver in use: ehci_hcd
    00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05)
    Subsystem: Lenovo Device 3975
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Capabilities: [e0] Vendor Specific Information: Len=0c <?>
    Kernel driver in use: lpc_ich
    00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) (prog-if 01 [AHCI 1.0])
    Subsystem: Lenovo Device 3975
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin B routed to IRQ 41
    Region 0: I/O ports at 3088 [size=8]
    Region 1: I/O ports at 3094 [size=4]
    Region 2: I/O ports at 3080 [size=8]
    Region 3: I/O ports at 3090 [size=4]
    Region 4: I/O ports at 3060 [size=32]
    Region 5: Memory at d0608000 (32-bit, non-prefetchable) [size=2K]
    Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
    Address: fee0f00c Data: 4191
    Capabilities: [70] Power Management version 3
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
    Status: D0 NoSoftRst+ PME-Enable- DSel=0 DSc

    meop wrote:Have you tried with other tools? Networkmanager, Wicd? Are all the access points around you wireless N, or are some G? Sometimes Atheros chips have trouble communicating with other wireless N chips. I have experienced this on my router.
    As far as iwlist doesn't detect any network, wpa_supplicant can't go further, and NM and Wicd are just wrapper tools for wpa_supplicant Wireless networks around are mixed b/g, no n capables.
    I have also tried to connect to my network by using sscan_ssid=0, so that wpa_supplicant would try to connect to it but it didn't work.
    meop wrote:This user posted a different issue recently, but at least he got the card working on Arch with Linux 3.6.2.. maybe you could message him?
    Wow, quite strange, we indeed seem to have the same hardware and the same environnement, but not the same result, thanks for the tip!
    meop wrote:The two solutions you tried were for a Ubuntu issue and a disconnect issue respectively, right? You could try loading a Live image of Ubuntu on your machine just to see if the card works on it, and then compare to Arch to see what settings or loaded module versions are different.
    I forgot to add it to the "what I've tried" list, sorry. I have already tried to boot with a Live Cd of Ubuntu 12.10, 12.04 and even 9.10 (kernel 2.6.32)
    Triby wrote:You have to put the interface up.  You have not described what steps you have taken to try to actually connect ... in fact it's not clear that u have taken any.  See the wireless wiki page and follow the manual connection steps.  Post the results/output of any failed step here.
    EDIT: the interface "link" is up : <NO-CARRER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DEFAULT qlen 1000, only protocol is DOWN
    I don't usually use front end like NM or Wicd, here's what I've done :
    ip link set wlan0 up
    wpa_passphrase <my ssid> <my password> > /etc/wpa_supplicant.conf
    wpa_supplicant -i wlan0 -c /etc/wpa_supplicant.conf
    Then no result. As I wrote earlier, I've also added "sscan_ssid=0".
    The problem is that "iwlist scan" does'nt get any result, meaning that my network card can't see wireless network around...
    Thanks for your responses.
    EDIT:
    I may have found something interesting, while I try to play with iwconfig and iwlist, something happens frequently in my dmesg :
    [ 104.887396] ACPI Error: [OPST] Namespace lookup failure, AE_NOT_FOUND (20120711/psargs-359)
    [ 104.887418] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q14] (Node f4430d38), AE_NOT_FOUND (20120711/psparse-536)
    [ 135.488964] ACPI Error: [OPST] Namespace lookup failure, AE_NOT_FOUND (20120711/psargs-359)
    [ 135.488985] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q14] (Node f4430d38), AE_NOT_FOUND (20120711/psparse-536)
    [ 172.469145] ACPI Error: [OPST] Namespace lookup failure, AE_NOT_FOUND (20120711/psargs-359)
    [ 172.469168] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q14] (Node f4430d38), AE_NOT_FOUND (20120711/psparse-536)
    [ 219.830670] ACPI Error: [OPST] Namespace lookup failure, AE_NOT_FOUND (20120711/psargs-359)
    [ 219.830693] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q14] (Node f4430d38), AE_NOT_FOUND (20120711/psparse-536)
    [ 234.578366] ACPI Error: [OPST] Namespace lookup failure, AE_NOT_FOUND (20120711/psargs-359)
    [ 234.578386] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q14] (Node f4430d38), AE_NOT_FOUND (20120711/psparse-536)
    I don't know why but this seems to be related... I'm googling that for now...
    Last edited by Smod (2012-11-03 08:57:35)

  • Wireless Issues with windows 7 on Macbook Pro 2008

    I have a 2008 Macbook Pro with Mountain Lion OS X and installed Windows 7 using Bootcamp Assistant. Can anyone help me with my wireless connection issues? I cannot seem to connect to the internet within Windows but surely within Mac OS.

    You likely did not do the first menu item when you started Bootcamp Assistant. This menu item is to download the Windows Support Software. You then install this Support software from within Windows.
    https://discussions.apple.com/community/windows_software/boot_camp

  • L2 Roaming issue with Avaya wireless phone on WISM -V6.0.196.0

    Hello Friends,
    I am facing Layer2 roaming issue with Avaya Wirless phone 3620 which are configured WPA / Pre-shared key auth with a SSID1 and face a cut or delay in the voice.
    But when i use Cisco Wireless phones and try to roam between one LWAP to other i dont face a cut or delay in the vocie which are
    Configured with 802.1x +CCKM auth .
    Then i configured new SSID 3 with 802.1x+CCKM settings for  the new Avaya wireless module 3631 , but still face cut and delay while doing Layer 2 roaming.
    While i was using these AP in WDS mode i never faced this Layer 2 roaming issue with Avaya wireless phones.
    In  current WISM all the LWAPs are supporting properly to the Cisco phone and Wirelss laptop clients.
    I request you to please let me know how do i proceed further to solve the issue and please let me know if anybugs or incompatibilty for WISM with Avaya wireless phones.
    Appreciate your response.
    Regards,
    KA.

    Hello ,
    Can any body please respond to my above Query.
    Thanks,
    KA.

  • Wireless Issues with Apple TV 2nd generation

    I have a linksys wireless router using WPA2 wireless security.  I have 5 laptops, 2 printers, 3 iPhones, and 2 iTouch's connected to the wireless with no problem.  My apple TV (second generation) has wireless issues, it will sit and connect and disconnect then reconnect then disconnect back and forwarth over and over.  It is the only device on my network that has issues.
    BTW,  I have an AppleTV 1st Generation that also has no issues.
    Any suggestions would be appreciated.

    Yes it is wireless and it is right next to my Playstation 3 that has netflix along with several internet games and is also wireless but has no problems.
    NEW INFO
    Upon further inspection.  It appears that my wireless is connected and I am logged into my itunes account but I only see 3 main categories at the top (Internet, Compouters, Settings) instead of (Movies, Tv Shows, Music, Computers, Internet, and settings).
    I have confirmed that my photo Stream from my phone is working and updated.  However, No YouTube access so no internet.  However, I know I am getting to apple because if I enter an incorrect password it tells me and also it stores the username/password.
    Not sure what to do.  I thought it was the wireless and still might hardwire the connection if I can but this is strange.  I have setup many ATV2 and have and ATV1 with no issues.
    Thanks for your help!

  • Ever since I received my Macbook Pro in July 2011 I've had issues with my wireless connection at home.  After software updates, Apple support suggested I reboot my router which works.  But now I have to do it every other day.  ????

    Ever since I received my Macbook Pro in July 2011 I've had issues with my wireless connection at home.  After software updates, Apple support suggested I reboot my router which works.  But now I have to do it every other day.  ????  AT&T my DSL carrier suggests I get a new router.  Apparently the one I have is really old and doesn't support my Macbook Pro.  Does this sound right?

    If your using WEP encryption yes, Apple has discontinued that becaues it's worthless. WEP (and WPA) is cracked so encryption makes no sense.
    Get a new Wireless N router, set it up with WPA2 (AES) Personal and two different 20+ randon letter/numbersymbol character passwords
    One for Admin access only of the router, keep this on paper off all comptuers in a safe someplace.
    One for entering into devices, computers etc for Internet Access Only.
    You need the long and random password to defeat brute force attacks by GPU software that the hackers have now.
    Also if you give out the password to another, they can't hack the network with the guest access password.
    Computers remember the internet password, so anyone with access to your machines or network will have the password.
    Since you have another Admin only password, they can't hack in. got it?
    You don't need "Invisible" or "MAC Address filtering" that's a waste of time as hackers can sniff a network and causes issues getting on the network.
    Good luck.

  • If you are having WIRELESS issues with SNOW LEOPARD.. update your software

    the latest osX update seems to have fixed the wireless issue with snow leopard

    I never had an issues with wireless before. Still don't. What was the problem?

  • T540p issue with ThinkPad Wireless 2 x 2 BGN with Bluetooth

    Hi,
    I have the T540p, an uplifting experience compared to the previous brand I had, however I have been suffering from a recurring issue with the wireless connection.
    Once starting up Windows 7 everything works fine except the wifi connection which refuses to connect. Putting the computer to sleep then starting it solves the issue.
    I tried to tinker with options to no avail. My technical knowledge is modest so kindly I request support from your esteemed forum members.

    Hi,
    Welcome to Lenovo Community Forums!
    I’m sorry to hear that you have issues with wireless connection in your Lenovo ThinkPad T540p.
    If you have Power manager installed, make sure that wireless adapter settings in Power manager is set to maximum performance as shown below.
    Also, go to control panel -> Power Options -> Change Plan settings under the power plan you have chosen -> Change advanced power settings -> Make the wireless adapter settings to maximum performance.
    Next, go to the device manager, select your Wi-Fi card -> go to Properties -> Advanced ->  Set "Transmit Power" to maximum, and "Roaming Aggressiveness" to lowest setting.
    Also, under the "Power Management" tab, remove tick for "Allow the computer to turn off this device to save power". And click "OK" to save the setting and reboot the PC.
    Hope the above suggestions will help to resolve your concern!
    Best regards,
    Mithun.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Mac mini issue:lost connectivity with the wireless keyboard

    I lost connectivity with the wireless keyboard and I can't unlock the lock screen.What can i do?

    Sometimes powering the keyboard off by holding in the power button on the right end of the battery box and then after ten of so seconds powering up again will reestablish the connection. Other than that forcing a reboot using the power switch on the mini should  restore the connection unless thereis something else going on.
    If this is a recurring problem try replacing the batteries with fresh ones. If this keyboard has been paired with another bluetooth device such as an iPad or another Mac, unpair it from the other device.

  • New MacBook Pro 13 i5 Wireless Issues.

    I got the new MacBook Pro i5 2.3 the day it came out. So maybe a week and half ago.
    I`m having intermittent wireless issues. I have done some testing and even replaced my older AirPort Base Station with the new Dual-Band one, but still seeing a drops from the network. I have a ping going to my router and to the ABSE. I tried changing the channel and using 5GHZ or 2.4GHZ. I also have a AirPort express and seen similar results. I tried reseting the PRAM, repairing permission, I did not reinstall the OS but I dont see how this would help. I think there is a hardware issue with the wireless card/antenna.
    I did upgrade RAM and HDD was changed to SSD (intel G2 SSD). There are no other issues, machine is fast, no lock ups. Other devices on the network do not seem to drop any connections (ATV, ATV2, iPhone4, iPad etc..)
    The network drop outs are short but are noticeable and if a ping is going I can see the drops
    *-- 192.168.1.1 ping statistics ---*
    *1527 packets transmitted, 1505 packets received, 1.4% packet loss*
    *round-trip min/avg/max/stddev = 0.779/12.203/396.084/42.274 ms*
    Any help is appreciated as I`m really frustrated but this issue.

    Here are some of the pings.
    +*64 bytes from 192.168.1.3: icmp_seq=2190 ttl=255 time=1.138 ms*+
    +*Request timeout for icmp_seq 2191*+
    +*Request timeout for icmp_seq 2192*+
    +*64 bytes from 192.168.1.3: icmp_seq=2193 ttl=255 time=1.701 ms*+
    +*64 bytes from 192.168.1.3: icmp_seq=2194 ttl=255 time=1.653 ms*+
    +*64 bytes from 192.168.1.3: icmp_seq=2195 ttl=255 time=1.723 ms*+
    +*64 bytes from 192.168.1.3: icmp_seq=2196 ttl=255 time=1.470 ms*+
    +*64 bytes from 192.168.1.3: icmp_seq=2197 ttl=255 time=1.435 ms*+
    +*64 bytes from 192.168.1.3: icmp_seq=2198 ttl=255 time=1.217 ms*+
    +*64 bytes from 192.168.1.3: icmp_seq=2199 ttl=255 time=1.115 ms*+
    +*64 bytes from 192.168.1.3: icmp_seq=2200 ttl=255 time=1.433 ms*+
    +*64 bytes from 192.168.1.3: icmp_seq=2201 ttl=255 time=1.002 ms*+
    +*64 bytes from 192.168.1.3: icmp_seq=2202 ttl=255 time=1.057 ms*+
    +*64 bytes from 192.168.1.3: icmp_seq=2203 ttl=255 time=1.222 ms*+
    +*64 bytes from 192.168.1.3: icmp_seq=2204 ttl=255 time=0.769 ms*+
    +*64 bytes from 192.168.1.3: icmp_seq=2205 ttl=255 time=0.821 ms*+
    +*64 bytes from 192.168.1.3: icmp_seq=2206 ttl=255 time=0.723 ms*+
    +*Request timeout for icmp_seq 2207*+
    +*64 bytes from 192.168.1.3: icmp_seq=2208 ttl=255 time=54.892 ms*+
    +*Request timeout for icmp_seq 2209*+
    +*Request timeout for icmp_seq 2210*+
    +*64 bytes from 192.168.1.3: icmp_seq=2211 ttl=255 time=1.313 ms*+
    +*64 bytes from 192.168.1.3: icmp_seq=2212 ttl=255 time=0.936 ms*+
    +*64 bytes from 192.168.1.3: icmp_seq=2213 ttl=255 time=1.839 ms*+
    +*64 bytes from 192.168.1.3: icmp_seq=2214 ttl=255 time=0.879 ms*+
    +*64 bytes from 192.168.1.3: icmp_seq=2215 ttl=255 time=63.446 ms*+
    +*64 bytes from 192.168.1.3: icmp_seq=2216 ttl=255 time=24.384 ms*+
    +*64 bytes from 192.168.1.3: icmp_seq=2217 ttl=255 time=105.923 ms*+
    +*64 bytes from 192.168.1.3: icmp_seq=2218 ttl=255 time=41.322 ms*+
    +*64 bytes from 192.168.1.3: icmp_seq=2219 ttl=255 time=1.853 ms*+
    +*64 bytes from 192.168.1.3: icmp_seq=2220 ttl=255 time=0.811 ms*+
    +*64 bytes from 192.168.1.3: icmp_seq=2221 ttl=255 time=0.721 ms*+
    +*64 bytes from 192.168.1.3: icmp_seq=2222 ttl=255 time=0.791 ms*+
    +*64 bytes from 192.168.1.3: icmp_seq=2223 ttl=255 time=3.816 ms*+
    +*64 bytes from 192.168.1.3: icmp_seq=2224 ttl=255 time=1.052 ms*+
    +*64 bytes from 192.168.1.3: icmp_seq=2225 ttl=255 time=0.688 ms*+
    +*64 bytes from 192.168.1.3: icmp_seq=2226 ttl=255 time=89.272 ms*+
    +*64 bytes from 192.168.1.3: icmp_seq=2227 ttl=255 time=49.459 ms*+
    +*64 bytes from 192.168.1.3: icmp_seq=2228 ttl=255 time=15.891 ms*+
    +*64 bytes from 192.168.1.3: icmp_seq=2229 ttl=255 time=0.745 ms*+
    +*64 bytes from 192.168.1.3: icmp_seq=2230 ttl=255 time=0.724 ms*+
    +*64 bytes from 192.168.1.3: icmp_seq=2231 ttl=255 time=0.680 ms*+
    +*64 bytes from 192.168.1.3: icmp_seq=2232 ttl=255 time=1.950 ms*+
    +*64 bytes from 192.168.1.3: icmp_seq=2233 ttl=255 time=0.600 ms*+
    +*Request timeout for icmp_seq 2234*+
    +*64 bytes from 192.168.1.3: icmp_seq=2235 ttl=255 time=0.725 ms*+

  • Problems with Verizon Wireless BlackBerry Tour BlackBerry OS 4.7.1.61 update:

    Problems with Verizon Wireless BlackBerry Tour BlackBerry OS 4.7.1.61 update - I was anxious to download the update to see if it addressed the sticky trackball problems and the low volume issue when using a blue tooth device. However, in the process of updating my BB Tour yesterday, the install stopped on the 8th out 12 updates. After a couple of 'retrys', the BB error message on the desktop came up which instructed me to: i) disconnect the device, ii) restart the computer. iii) restart the loading process and, iV) restore my data by loading the loader back-up file using Restore. Unfortunately my Tour was left without any software and the Desktop manager couldn't recognize it. The error message on the Tour was 503. Called Verizon Wireless tech and bottom line, the only fix is a new Tour, which they're sending me. Anyone else having issues with the update? Also, does it address the trackball and blue tooth issues?

    I had issues with the trackball and had to have my Tour replaced.  I was told this model does not have a removable trackball so the entire phone has to be replaced.  My current one is working OK but does stick a bit.  Seems to get worse over time.  My wife's tour is newer and so far she is not experiencing the problem.  Have not experienced a problem with the Blue Tooth volume.
    I have another issue with this upgrade that I am wondering if anyone else has seen.  My wife has the Tour as well.  She was prompted to do the upgrade and went through it.  It appeared to work except it blew out her Contact Alerts.  When we put them back in we can no longer get the sound to play when she receives an SMS message in her holster. Vibration works but doesn't do any good when it is in her purse.  Phones calls, calendar alerts, alarms all work in holster.  As soon as we delete the contact alert the default SMS alert will play in the holster.  If she takes her phone out of the holster the Contact alert will play.  My phone is still running 4.7.1.40 and this function works fine.  I am thinking about trying to put her's back to my version if possible but not sure the best way to go about this 

  • I have had wireless issues sense Leapord, any fixes yet? its a shame that my wife has to sit in front of our 27 inch imac on a $300 Windows computer to use the web effectively. I have tried all fixes  and some work while others don't but all temporary

    This Lion wireless issue has become more than just an irritation, so much so, my wife has resorted to sitting in front of a 27 inch imac with a 300 dollar Walmart Windows computer to get the bills paid and use the web. And yes, there is not a fix out there I haven't tried over the last year or so, some worked and some didn't, but all were temporary at best. Same issue with my Macair, I wonder if its a hardware issue, like the video card in my 2006 MBP, it went out after the warrenty and then I found out there was a calss action suit going on over it, unfortunately Apple wouldn't cover it and wanted 7oo bucks to fix it, sold that as parts.
    While i really like me Macs, I own three, I may have to bow out and stick with LINUX, that has yet to let me down, anyone know if Mountain will fix this issue? or are we all just waiting for defective WiFi cards to fail at our own expense, PS, got three Macs for sale.

    Sounds like you're getting kernel panics, which are usually, but not always, caused by hardware problems, with memory being one of the regular culprits.
    First thing I would do is to get our your original OS X disks, insert the first one (should say 'AHT version x.x' in small print on the label - if not, find the one that does), and reboot holding the Alt key down. Choose the Apple hardware test, and when prompted, choose the extended test. If you have either of the TechTool programs, they can do similar testing. Does that identify any hardware issues?
    Next, I'd download rember from http://www.kelleycomputing.net/rember/ . This is a memory testing program that you can set to run overnight. Does it come up with any errors? If so, try resetting your memory card(s) by removing and putting back into the computer. Rerun memory test.
    This FAQ will provide other details: http://www.thexlab.com/faqs/kernelpanics.html

  • Macbook Pro (Late 2008) - Windows 7 64-bit, Bootcamp 3.1 - Wireless Issue

    Hi Everyone,
    I have a Macbook Pro (15-inch, Late 2008) model with Snow Leopard and Windows 7 64-bit dual boot. I have done a search and cannot find any reference to this problem on my hardware.
    I have had no issues in Windows 7 when using Bootcamp v3.0. In the last week I have upgraded to Bootcamp v3.1. (completed twice, rolled back in between to prove that the issues was related to the Apple Update)
    After I update to v3.1, I have issues with my wireless network. The network cannot resolve the name for any internet address. I can connect to wireless networks (tried multiple networks), all the DHCP settings seem to be retrieved correctly (Gateway, DNS etc) and I can ping local and machines outside my network without an issue provided I use the IP address. (Skype works - which uses direct IPs rather than names I have found over time)
    As soon as I use a name for a destination for Web traffic, Mail, pinging (any application), my Macbook Pro cannot resolve the address and just bombs out.
    If I connect to a wired network, the machine works perfectly and name resolution on that interface works. If I rollback (using Windows 7 rollback capability) to before the v3.1 Bootcamp is installed, the wireless networking also works perfectly.
    I noticed this in the support area at apple:
    http://support.apple.com/kb/TS3196
    But this refers to wireless issues in Bootcamp drivers prior to v3.1 and on 13 inch Macbook. Wonder if this is a similar issue or related?
    Anyone else seen this or point me in the direction of a fix?
    Thanks,
    Thommo

    I'm looking into running Windows 7 64bit on the exact same MBP you have, so I'm curious as to whether or not you've found a solution yet outside of the forums.
    Do you think it might be that the bootcamp 3.1 update is only for Windows 7 32bit and not for the 64bit version?

  • Configure New TM on a New Macbook pro with retina display Issue

    I have bought a new New Macbook pro with retina display laptop (Lion moutain OS)and a new TM (2TB).
    I have an internet router with wireless connect.
    I plugged TM to the router with an ethernet cable.
    Connect my TM to my macbook with an ethernet cable.(at this point I still cannot see TM on my Mac)
    then I choose Time capsule from WiFi as shown below:
    Then the airport utility (version 6.1) opened and start configuring TM but it gives an expected error when it is starting to join the TM!!!!
    I have reset the TM several time but with no hope.
    PS: I can configure the same TM on a normal laptop with windows 7 installed and Airport utility 5.6
    I am struggling on this issue for weeks and I cannot yous TM on my macbook pro.
    Help please.

    Time Capsule .. TC is the hardware box you bought.. Time Machine is the software you use in the Mac computer.. so what you generally refer to as TM is really TC.. !!
    I can configure the same TM on a normal laptop with windows 7 installed and Airport utility 5.6
    That is great.. you do not need to setup the Time Capsule at all then. It is already setup.. forget using 6.1 utility.. it is useless toy version.
    Just use it.. open Time Machine and see if you can connect to the TC drive to do backup.. and to the wireless.
    From your statements..
    Connect my TM to my macbook with an ethernet cable.(at this point I still cannot see TM on my Mac)
    You are trying to connect with both wireless and ethernet at once.. This can mess things up. choose wireless or ethernet.. not both.
    If you keep running into issues.. reset the TC.. I know yet again.
    Set it up using SMB names.. for both the TC itself and wireless.
    Then lock the wireless channel for 2.4ghz.. use channel 1, 6, or 11 (13 in europe) and see how it goes.

Maybe you are looking for

  • OBIEE Guided Navigation Link - How to open in New page.

    Hi, I am using Guided navigation links in OBIEE dashboards to link some of my reports. When i click on the Link it opens the report on the same page. Instead i have to open the report in a new page. This Option is available in 'Link OR Image' section

  • Problems with iTunes and Windows Vista

    I just got a new dell computer that came with Windows Vista. I'm new to Vista, and just downloaded iTunes. I was able to add my music and it will play, but I can't edit track information. I downloaded iTunes from the administrator account, so I don't

  • Prints made w. 2011 Mini too light, from 2009 Mini OK?

    Images edited w. Photoshop CS5 (v. 12.03) on a "Early-2009" Mac Mini running OS 10.6.8 print perfectly on my Epson Stylus Pro 3880. But the same files printed from a newer "Mid-2011" Mini running OS 10.7.4 and Photoshop CS5 (v12.1) print too light. E

  • Java button help

    Alright this is what im trying to do. I have already created two buttons and i have a separate event handler object. I want to be able to click the "Hide/Show ON/OFF" button and that sets the second buttons visible property to false and when clicked

  • Saw.dll?BIEEHome&startPage=1 & ?Logoff HTML

    Hi, I'm new to OBIEE (11g) and basically, here's the problem we're having: We changed our header to include our new logo. The logo appears, but on the log on and log off page, the logo is the wrong width. Here's what I've found by simply viewing the