Iphone5s get hanged on restart

my iphone5s get hanged and its showing blackscreen into apple logo and this happens when i reset the iphone anyone tell me how to repair the iphone

Hi karthi1494,
Thank you for participating in the Apple Support Communities.
If your iPhone 5s is becoming unresponsive and only shows a black screen or Apple logo, the advice in this article can help:
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
All the best,
Jeremy

Similar Messages

E66 get hanged and restarted when selecting any th...

Hi friends,
I just purchased E66 3 week ago.
Its just awesome phone.
But when I tried to change theme from Grey to White steel directly without preview it gets hanged and restarted.
Anybody having this type of problem?
let me know

In the search window, if you can, search for "com.apple.finder.plist". Trash it, and restart.
If you can't do it, put your machine in Target Mode, and connect to a buddies machine. Search for, and remove, that same file.

Iphone5s get hang on reset

i am using iphone5s ,in that space is low so i take up a backup and reset with everything there goes problem it hangs in the apple logo screen not responding
plz give me a sugesstion

If you can't update or restore your iOS device
If you can't update or restore your iPhone, iPad, or iPod touch
iOS: Not responding or does not turn on - Apple Support
Since you have a back up of your device - you can try to put it in the recovery mode -
Turn off your device and leave it off.
Plug in your device's USB cable to a computer with iTunes.
Hold down the Home button on your device as you connect the USB cable. Keep holding down the Home button until you see the Connect to iTunes screen.
When you see this screen, release the Home button. If you don't see this screen, try steps 1 through 3 again.
When your device is connected, iTunes will open. You'll see a message saying that iTunes has detected an iPhone, iPad, or iPod touch in recovery mode.
Use iTunes to restore your device. Restoring in recovery mode will erase your device. If you previously synced with iTunes or iCloud, you might be able to restore from your backup.

E90 Hangs after restart.... Requires Hard reformat...

Hi Guys,
Any one faced problems with E90 Phone getting hanged after restart.... It hangs up at the boot cycle..... You have to hard format using * + Call + 3 + Power on button to reformat it.
But after reformating it after i restore my data, after restart it again hangs...
Any one aware of any firmware or software that can help me solve this issue.

It is the orginal Snow Leopard install disk that came with the machine.
Techtool indicates that the dvd drive is working correctly.
Techtool shows Disks 3 and 4 are working correctly.
Disk utility and disk warrior show 3 & 4 are working correctly.
Disk utility and disk warrior say that the raid setup needs to be rebuilt.
In order to rebuild the raid and lots of other reasons using the install disk is necessary.

Mountain 10.8.2 do not like '.exe' file at all !! IT gets Hanged and then Force to restart

After Update with 10.8.2. The System get hang (stuck)
I had to do a forced restart, several time and even a ReBoot in safety more.
AND I FIGURED OUT WHY :
I realized that in one of my folder (Download) I had an ".exe" File; Than have been downloaded (because i got Parallel Desktop that neable window7 to run under the Mac), and causes the problem (system is hanged)
Then when I reboot in safety mode I deleted that file. And Then everything went OK.
But when I plugged my USB key, I got again my system that turn to stop... Then again Force to Restart, remove the USB Key.
Guess what!! In the USB Key (at the root) there was again some '.exe' Files...
In conclusion :
There is an issue with that new release of Mountain Lion 10.8.2 that cause the system to get hang, when "Finder" meet an '.exe' file.
It occurs only when you open your "Finder" then go throughout some folder where you have placed some '.exe' file. Then your system will not respond anymore. You got to force the restart
Just to make it clear, of course I do not want to run an '.exe' file under Mac.
But If like me you have Parallel Desktop in order to run Window7 or 8; you might have some '.exe' file that are located in your Mac Folder…..
Then, when you open 'Finder' and you walk through your folder and meet an '.exe' file, thus you system will freeze!!
Work Arround Solution, that's only happen if your '.exe' File is not associtaed to be open under Window Explorer (if you have Parallel Desktop, of course).
Then, make sure to associate the extension '.exe' to Window Explorer, if you have some '.exe' File that are located in your folder or USB key,
Otherwise your system will freeze and you will have to force the restart.
Cheers

That right I do not need to have any .exe file in my Mac environment; but having
installed Parallel Desktop (to have a Window Environment, due to business matters)
you might have from time to time some of that files ins download area or in the USB key.
The Test I made is very simple : I placed an .exe file in an USB Key; then plug in to my Mac
then from Finder open the folder where was that exe file…. Guess what ???
My computer get FREEZE (no respond)… I got to reboot.
Then I do not know what's going on. With the previous version (10.8.1) I never got such of issue ?
Here is the log beofre I had to restart:
2012-09-21 12:16:19 +0200 Finder[141]: *** WARNING: Method userSpaceScaleFactor in class NSWindow is deprecated on 10.7 and later. It should not be used in new applications. Use convertRectToBacking: instead.
2012-09-21 12:16:19 +0200 Finder[141]: *** WARNING: Method userSpaceScaleFactor in class NSView is deprecated on 10.7 and later. It should not be used in new applications. Use convertRectToBacking: instead.
2012-09-21 12:16:20 +0200 SystemUIServer[140]: *** WARNING: Method convertRectToBase: in class NSView is deprecated on 10.7 and later. It should not be used in new applications.
2012-09-21 12:16:20 +0200 SystemUIServer[140]: *** WARNING: Method convertRectFromBase: in class NSView is deprecated on 10.7 and later. It should not be used in new applications.
2012-09-21 12:16:20 +0200 SystemUIServer[140]: *** WARNING: -[NSImage compositeToPoint:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
2012-09-21 12:16:20 +0200 SystemUIServer[140]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
2012-09-21 12:16:20 +0200 com.apple.SecurityServer[17]: Session 100003 created
2012-09-21 12:16:21 +0200 awacsd[66]: Exiting
2012-09-21 12:16:25 +0200 kernel[0]: KLIF ERROR: scan for file /System/Library/PrivateFrameworks/IMFoundation.framework/Versions/A/IMFoundatio n timed out, returning 1 as status
2012-09-21 12:16:30 +0200 System Preferences[186]: *** WARNING: Method userSpaceScaleFactor in class NSWindow is deprecated on 10.7 and later. It should not be used in new applications. Use convertRectToBacking: instead.

HT201257 My Macbook pro gets hang & some time restarted frequently , please revert with solution , thnx

My Macbook pro gets hang & some time restarted frequently

If you're having kernel panics, please post the text of the log in a reply here. See -> http://support.apple.com/kb/HT2546. If you have a panic log it will be in your root /Library/Logs/DiagnosticReports folder.
Also please post your MacBook Pro model (e.g., "15-inch Late 2011" or "8,2").
Call back,
Clinton

TS2755 Application gets hanged in centre..cant open any application and cant able to restart too

Application gets minimized in the centre while closing the application..cant open the any of the menu since its gets hanged at the centre...cant able to restart the device...

Did you try reseting your iPad. Press and hold both the home and power buttons for 10-15 seconds till the Apple logo appears. Release both buttons. Wait 15-20 seconds till your iPad starts on it's own.

Macbook pro 13" gets hanged within 3minutes if start and thats it. have to restart everytime. highly irritating just like pc. solution please?

system gets hanged always. Shifted from pc to apple because of this reason and same happens.

If your Mac runs slowly:
http://support.apple.com/kb/PH19031?viewlocale=en_US&locale=en_US
   Start up in Safe Mode. http://support.apple.com/kb/PH18760
Reset SMC.     http://support.apple.com/kb/HT3964
Choose the method for      "Resetting SMC on portables with a battery you should not remove on your own".
Repair Disk. Steps 1 through 7
http://support.apple.com/kb/PH5836
If this doesn’t help:
Run EtreCheck: https://discussions.apple.com/docs/DOC-6173    and post a report here.
Best.

My iphone5 is getting hang frequently after updating ios8

After updating ios8 in my iphone 5,its getting hang frequently (3,4 times a day).i have reset the device twice but still facing problems.battery life was great in ios 7 but worse in this.please fix this.

Hello kshashwat,
Thanks for the question. Based on what you stated, it seems like the iPhone stops responding. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
iOS: Not responding or does not turn on
Thanks for using Apple Support Communities.
Have a great day,
Mario

Whenever i tried save as or save PDF created document in Acrobat std 11 (11.0.7), Acrobat get hanged and unresponsive

Dear Sir,
I am using Acrobat std 11, (version 11.0.7) with windows 8 in my company. Whenever i try to save any edited or converted or combined PDF document Acrobat software become unresponsive. same issue is there with while i try to insert any new page to PDF from a file, dialog box will not open but it get hanged & become Unresponsive. Acrobat may please help in this issue.
my PC spesifications are as follows:
Account Detail:
   User Rights: Regular
   User Account Control: Default
   Process Integrity: Undefined
   Profile Type: None
Acrobat Detail:
   Sandboxing: Off
   Captive Reader: No
   Multi-Reader on Desktop Support: Off
Applications Installed:
   Office Version: Office 2010 32-bit
Available Physical Memory: 2121868 KB
Available Virtual Memory: 3990316 KB
BIOS Version: DELL   - 1072009
Default Browser: C:\Program Files\Internet Explorer\iexplore.exe
    Version: 10.00.9200.16384 (win8_rtm.120725-1247)
    Creation Date: 2012/07/26
    Creation Time: 4:48:22 AM
Default Mail: Microsoft Outlook
    mapi32.dll
    Version: 1.0.2536.0 (win8_rtm.120725-1247)
Display Detail:
   Screen Width: 1920
   Screen Height: 1080
   Number of Monitors: 1
   Number of Mouse Buttons: 3
   Has Mouse Wheel: Yes
   Has Pen Windows: No
   Double Byte Character Set: No
   Has Input Method Editor: Yes
   Inside Screen Reader: No
Graphics Card: Intel(R) HD Graphics (Microsoft Corporation - WDDM 1.2)
    Version: 9.17.10.2768
    Check: Not Supported
Installed Acrobat: C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\Acrobat.exe
    Version: 11.0.07.79
    Creation Date: 2014/05/08
    Creation Time: 7:19:08 PM
Installed Acrobat: C:\Program Files (x86)\Adobe\Reader 11.0\Reader\AcroRd32.exe
    Version: 11.0.0.379
    Creation Date: 2012/09/24
    Creation Time: 9:13:34 AM
Locale: English (United States)
Monitor:
    Name: Intel(R) HD Graphics (Microsoft Corporation - WDDM 1.2)
    Resolution: 1920 x 1080 x 60
    Bits per pixel: 32
OS Manufacturer: Microsoft Corporation
OS Name: Microsoft Windows Vista
OS Version: 6.2.9200
Page File Space: 4194303 KB
Processor: Intel64 Family 6 Model 58 Stepping 9 GenuineIntel ~2893 Mhz
Session Detail:
   Boot Type: Normal
   Is Shutting Down: No
   Network: Available
   Inside Citrix: No
   Inside VMWare: No
   Remote Session: No
   Remote Control: No
System Name: BRDROC00DT130
Temporary Directory: C:\Users\123660\AppData\Local\Temp\
Time Zone: India Standard Time
Total Physical Memory: 4066528 KB
Total Virtual Memory: 4194176 KB
User Name: 123660
Windows Detail:
   Tablet PC: No
   Starter Edition: No
   Media Center Edition: No
   Slow Machine: No
Windows Directory: C:\Windows
Regards,
Dharmender

Hi Dharmender ,
Did you try to repair your Acrobat once ?If not please try the same and check if that helps you out .
Launch Acrobat >Navigate to Help >Repair Acrobat Installation .
Do you get any error message or any prompts when it hangs and become unresponsive ?
Does this happen with any specific PDF or all the PDF'?
Also you could try to uninstall Acrobat once and they re install it if the above step does not work .
Please restart your machine once as well.
Regards
Sukrit Dhingra

Weblogic portal is getting hanged after a regular interval

Hi,
We are using WLP 8.1 SP 5 on a HP Unix environment. Our Weblogic instance is getting hanged and we need to restart the same. This problem is happing once in a 3 weeks time. From console we cheked that avilable memory for JVM heap is quite low when this happens. Below are the some of the log messages we have found in the weblogic log:
<Jun 28, 2010 6:12:59 AM GMT> <Error> <HTTP> <BEA-101083> <Connection failure.
java.net.SocketException: Error in poll for fd=172, revents=32
at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:131)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:32)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:224)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:183)
>
<Jun 28, 2010 6:45:14 AM GMT> <Error> <WebLogicServer> <BEA-000337> <ExecuteThread: '57' for queue: 'default' has been busy for "966" seconds working on the request "Http Reques
t: /Xxxxx/global/docs/en/careers/Xxxxx_Power_Source.wmv", which is more than the configured time (StuckThreadMaxTime) of "600" seconds.>
********* resources error jsp is called *******
<Jun 28, 2010 7:55:14 AM GMT> <Error> <WebLogicServer> <BEA-000337> <ExecuteThread: '13' for queue: 'default' has been busy for "606" seconds working on the request "Http Reques
t: /Xxxxx/global/docs/en/xxxxx/media_publications/technical_papers/xxxx.pdf", which is more than the configured time (StuckThreadMaxTime) of "600" seco
nds.>
********* resources error jsp is called *******
<Jun 28, 2010 7:46:13 AM GMT> <Error> <HTTP> <BEA-101046> <[ServletContext(id=12830383,name=xxxxxportal,context-path=)] mt:mail: Could not send message
javax.mail.SendFailedException: No recipient addresses
at javax.mail.Transport.send0(Transport.java:111)
at javax.mail.Transport.send(Transport.java:81)
at org.apache.taglibs.mailer2.BackgroundMailThread.run(BackgroundMailThread.java:65)
     ********* resources error jsp is called *******
Any help is highly appriciated.

Hi,
Please find below my findings about the memory leak.
Many (around 40 where max connection is 50) connection were created without they getting closed in a very short span of time. This caused the connection pool to be filled as rest of the connections in the connection pool were doing something else. Below is the log message:
####<Jul 4, 2010 12:24:01 AM GMT> <Info> <Common> <domainname.xxxxxxxx.com> <EXL> <ExecuteThread: '4' for queue: 'default'> <<anonymous>> <BEA1-39390F6683087D485CB1> <BEA-000627> <Reached maximum capacity of pool "portalPool", making "0" new resource instances instead of "1".>
####<Jul 4, 2010 12:24:01 AM GMT> <Info> <Common> <domainname.xxxxxxxx.com> <EXL> <ExecuteThread: '48' for queue: 'default'> <<anonymous>> <BEA1-393D0F6683087D485CB1> <BEA-000627> <Reached maximum capacity of pool "portalPool", making "0" new resource instances instead of "1".>
####<Jul 4, 2010 12:26:06 AM GMT> <Info> <Common> <domainname.xxxxxxxx.com> <EXL> <ExecuteThread: '45' for queue: 'default'> <<anonymous>> <BEA1-397A0F6683087D485CB1> <BEA-000627> <Reached maximum capacity of pool "portalPool", making "0" new resource instances instead of "1".>
This caused all the threads handling request to the application hanged.
####<Jul 4, 2010 12:29:24 AM GMT> <Error> <WebLogicServer> <domainname.xxxxxxxx.com> <EXL> <weblogic.health.CoreHealthMonitor> <<WLS Kernel>> <> <BEA-000337> <ExecuteThread: '1' for queue: 'default' has been busy for "636" seconds working on the request "Http Request: /xxxxxxxx.portal", which is more than the configured time (StuckThreadMaxTime) of "600" seconds.>
####<Jul 4, 2010 12:29:24 AM GMT> <Error> <WebLogicServer> <domainname.xxxxxxxx.com> <EXL> <weblogic.health.CoreHealthMonitor> <<WLS Kernel>> <> <BEA-000337> <ExecuteThread: '2' for queue: 'default' has been busy for "696" seconds working on the request "Http Request: /xxxxxxxx.portal", which is more than the configured time (StuckThreadMaxTime) of "600" seconds.>
69 of 70 threads hanged and logged this error message
Also, other Weblogic modules (EJBs etc.) were not able to release connections due to this connection leak problem.
<Jul 4, 2010 12:31:13 AM GMT> <Info> <EJB> <domainname.xxxxxxxx.com> <EXL> <ExecuteThread: '15' for queue: 'default'> <<anonymous>> <BEA1-38C90F6683087D485CB1> <BEA-010051> <EJB Exception occurred during invocation from home: [email protected]106df27 threw exception: javax.ejb.TransactionRolledbackLocalException: EJB Exception: ; nested exception is: javax.ejb.TransactionRolledbackLocalException: EJB Exception: ; nested exception is: weblogic.transaction.internal.TimedOutException: Transaction timed out after 502 seconds
BEA1-38C90F6683087D485CB1
These hanged threads and EJBs caused the memory leak in JVM heap.
####<Jul 4, 2010 2:00:35 AM GMT> <Error> <T3Misc> <domainname.xxxxxxxx.com> <EXL> <weblogic.time.TimeEventGenerator> <<WLS Kernel>> <> <BEA-000712> <Exception invoking Scheduled Trigger
java.lang.OutOfMemoryError: Java heap space
java.lang.OutOfMemoryError: Java heap space
>
When checked the JDBC log the below exception was found:
SQLException: SQLState(null) vendor code(17002)
SQLException: SQLState(null) vendor code(17002)
java.sql.SQLException: Io exception: Broken pipe (errno:32)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:146)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:255)
     at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:387)
So, what might cause this JDBC error. Is the problem at Weblogic end or the database end? It seems that the connections are hanging due to this JDBC error which is causing the connection pool to be filled up. Subsequently threads are hanging which leads to memory leak.
Please help as this issue is reoccuring again and again!!!

Business connector scheduler gets hanged and Next run value is large number

Hi All,
I see the scheduler in business connector gets hanged and the Next run value shows huge/large number like 9223370831700598.0 sec. Please can anyone suggest what can be done.
Currently BC ver is 4.7. The problem gets resolved every time when i restart the server.

Hi,
Not aware of the reason though, I guess you must be using the simple scheduled tasks.
Try using complex reapting tasks where you specify days , minutes etc.
It should work fine.
Hope it helps. Reward if useful.
Regards,
Siddhesh S.Tawate

Why my iPhone5C is getting Hang after updating to iOS8?

After updating to iOS8 my iPhone5C is getting Hang Frequently once or twice a day. Please fix this problem releasing stable OS. Not only I am having same problem some of my friends having iPhone5C and 5S are also having same.
Please release iOS8.0.1 or iOS8.0.2

My 5c too was
hanging
Once I'd restarted it
Now it has stopped hanging

My iPad2 is getting hang/frozen.

My ipad2 is getting hang/frozen in between & i can't do anything. None of the button works. Even the shutdown button dosen't work. I have to left ipad2 for few hrs and after that it becomes normal. Dose anyone is facing this problem? Is this iPad2 is faulty? My iPad2 software is also updated to latest version 4.3.3(8J2).
Priten

Hi,
Yes i found a solution to bring the frozen ipad into normal mode.
Please press Power and frong center Home button at the same time for few second and release it. This will restart the ipad2 successfully regardless of it's frozen. After this i upgraded my Garageband app with latest version and i never faced the same problem again.
Hope this will solve your proble too.

Display on Qosmio F60-10U Turns Mozaic and System Getting Hang

From The Day I purchased F60-10U; i am facing thins problem. My display occasionally Turns into Mozaic and same time System Getting Hang. only thing i can do is restart with power button.
i had given to service center; they told that its because of virus and need to be formatted. as i was 100% sure that its not because of virus; i took back from there.
I had tried below:
1. Update Display Driver
2. Downgrade Display Driver
3. Factory reset
4. Scan for virus with various engines
5. Updated All Drivers
Nothing works...
Anybody else has got same problem?
Hope that i can get some fix for this.
Here is a Picture of Display when its Happens.
Link:[http://www.glowfoto.com/static_image/11-120740L/7879/jpg/09/2010/img4/glowfoto]
Rgrds,
Chintan

I dont think this issue has anything to do with virus and I believe graphic card is defective. All you have done is right and after factory image installation virus will be killed and everything should work well.
Contact service again, let them test with factory settings and if the same will happen again I presume they will exchange motherboard.

Iphone5s get hanged on restart

Similar Messages

Maybe you are looking for