IPhone5s not getting wifi connectivity using iBaton router-BSNL broad band

I have been using my IPhone5s over BSNL Wifi router and due to some erro I have replaced the same with iBaton router. After replacing it I am  not able to connect my Iphone to the wifi. I have used the normal method to search the wifi router and keyed in the wifi password, but the Iphone5s is not getting connected to wifi (its always in search mode). I am able to connect my laptop and Samsung S3 with out any difficulty and can browse the sites. I have tried few methods found over the net to connect the Iphone using static ip, though for few seconds the phone is getting connected to the wifi, it again goes back to the search mode of wifi
Anticipate your valuable suggestions to fix the issue
P.R.Nambiar

Hello prnambiar,
The article linked below details some useful troubleshooting steps that can help resolve issues with connecting to your Wi-Fi network.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
Cheers,
Allen

Similar Messages

  • Have done all the trouble shooting connection but my iPad still can not get wifi connection

    i have done all the trouble shooting connection but mu iPAd still can not get wifi connection

    Hi Jo,
    Each router is a little different but here are the basics: login to the router using the administrator account, should have that info from the installer, and then you should find something like security settings, or it may be advanced security.  There will be a setting to the effect of limiting access, or it may say allow Mac address authentication, or admit the Mac addresses in the table...if that is switched on, you can just switch it off and that will allow any wireless device to attach.  If you want to keep it on, then you have to enter the Mac address for the device you want to use for access.  In the case of the iPad, go to Settings > General > About > WiFi Address (another way of saying Mac address).  Enter that very long sequence in the router's Mac address acceptance table and that should take care of things.
    Using the Mac address does not change any of the email settings, just limits attaching to the router in the first place.
    If you are already getting email, you must be attaching already so this should not be an issue.  If you are having email issues, such as receive but not send, you may not have the outgoing server set correctly: Settings > Mail > Account > Outgoing server name (usually an SMTP server) and you may have to go to the advanced settings to enter the outgoing password (normally the same as the account/incoming password) and then check to see if SSL is ON or OFF...most common email services say to set to OFF.

  • My macbook air is not getting internet connection through our home wifi It was working fine yesterday until I took the Air out of the house and used it on another wifi connection.

    My macbook air is not getting internet connection through our home wifi.  It was working fine yesterday until I took the Air out of the house and used it on another wifi connection.  One question is how to delete some of the networks that I don't use.  Would too many networks cause the internet connection to fail?
    Thanks.

    Would too many networks cause the internet connection to fail?
    It shouldn't but sometimes deleting the list of networks actually does solve the problem you are describing. Have you turned WiFi off and then back on on the computer?

  • I have not get wifi after a crash in system CQ56-105 tu i am using windows xp help me please

    hi sir ,
    i am using windows xp. the system crashed after  opening a mail after that instaled windows 7 it doesnt work well , so now i had installed xp...now i am not getting wifi plsystem please help me and my  sYStem CQ56-105tu

    It is possible that your anti-virus software is corrupting the downloaded files or otherwise interfering with downloading files by Firefox.
    Try to disable the real-time (live) scanning of files in your anti-virus software temporarily to see if that makes downloading work.
    * http://kb.mozillazine.org/Unable_to_save_or_download_files

  • My ipda2, suddendly do not show the Wifi logo in the main screen,  so I do not have wifi connection. I  can't do any wifi setting

    My ipda2, suddendly do not show the Wifi logo in the main screen,  so I do not have wifi connection. I  can't do any wifi setting

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
     Cheers, Tom

  • How can i fix my wifi connection with my router

    how can i fix my wifi connection with my router?

    I think I'm having a similar problem, my wifi disconnects when a bluetooth device is connected to the MBA. 
    I have a MacBook Air (13-inch, Mid 2012) with WiFi and Apple Trackpad.  I'm unable to use the trackpad(bluetooth) and wifi at the same time.  If I turn off the trackpad then the wifi works fine and if I shutoff the wifi then the trackpad works fine.  This configuration was working fine prior to upgrading to Yosemite.
    I experienced the same problem at home and at the office.
    Additional test:
    I turned off the bluetooth trackpad and connected my bluetooth headphones to the MBA.  The wifi disconnected as soon as I paired the headphones with the MBA.
    I have had no problems with the MBA's keyboard or integrated trackpad. 
    Rick

  • Getting socket error while trying to get oracle connection using JDBC

    hi,
    I am getting following socket read error while trying to get database connection using JDBC. This happening with jdk1.5.0_12 version with Oracle 9i
    following is the stacktrace...
    Thread t@92: (state = IN_NATIVE)
    - java.net.SocketInputStream.socketRead0(java.io.FileDescriptor, byte[], int, int, int) @bci=0 (Compiled frame; information may be imprecise)
    - java.net.SocketInputStream.read(byte[], int, int) @bci=84, line=129 (Compiled frame)
    - oracle.net.ns.Packet.receive() @bci=31 (Compiled frame)
    - oracle.net.ns.DataPacket.receive() @bci=1 (Interpreted frame)
    - oracle.net.ns.NetInputStream.getNextPacket() @bci=48 (Compiled frame)
    - oracle.jdbc.driver.T4CMAREngine.unmarshalSB1() @bci=1, line=1070 (Compiled frame)
    - oracle.jdbc.driver.T4CStatement.doOall8(boolean, boolean, boolean, boolean) @bci=617, line=207 (Compiled frame)
    - oracle.jdbc.driver.T4CStatement.executeForDescribe() @bci=39, line=790 (Compiled frame)
    - oracle.jdbc.driver.OracleStatement.executeMaybeDescribe() @bci=106, line=1039 (Interpreted frame)
    - oracle.jdbc.driver.T4CStatement.executeMaybeDescribe() @bci=11, line=830 (Interpreted frame)
    - oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout() @bci=128, line=1132 (Interpreted frame)
    - oracle.jdbc.driver.OracleStatement.executeQuery(java.lang.String) @bci=76, line=1272 (Interpreted frame)
    any help would appreciated. thanks in advance

    I do not have exact exception message.
    additionally, i have got following the tomcat log file:
    INFO - Resource pool cleanup thread just woke up.
    Nov 1, 2008 3:41:52 AM org.apache.tomcat.util.threads.ThreadPool logFull
    SEVERE: All threads (100) are currently busy, waiting. Increase maxThreads (100) or check the servlet status
    INFO - Resource pool cleanup thread just woke up.
    thanks in advance

  • HT201415 My iPhone is not having wifi connection anywhere

    My iPhone is not having wifi connection anywhere

    Hi PamelaVR,
    Thanks for visiting Apple Support Communities.
    I recommend starting with these troubleshooting steps if your iPhone battery is not behaving as you'd expect:
    Battery does not charge
    Verify that the outlet being used is working.
    Try another USB power adapter if available.
    If no other USB power adapter is available, try connecting to a high-power USB 2.0 port (not a keyboard). The computer must be turned on and not in sleep or standby mode.
    Try another USB cable if available.
    iPhone or iPod touch displays the low-battery image and is unresponsive
    If you see the image below, charge the iPhone or iPod touch with USB power adapter for at least 15 minutes.
    You should see this image when iPhone or iPod touch begins to charge:
    If the screen still displays the low-battery icon, try turning the iPhone or iPod touch off and then on again.
    If the issue persists, follow these troubleshooting steps.
    From:
    iPhone and iPod touch: Charging the battery
    http://support.apple.com/kb/HT1476
    Regards,
    Jeremy

  • Can not get mail, connection to the server failed

    have been recieving/using work emails and calender via exchange for years but as of this week i have lost access all i keep getting is 'can not get mail, connection to server failed. i have change password but still not working any advise PLEASE..

    Hmmm.  I've seen that message before, I usually just continue with the account and save it, then power off /on the phone.  It usually works after that.
    Has anything change with your account?

  • Problem with not getting Internet Connect on AirPort Express

    Problem with not getting Internet Connect on AirPort Express (version7.6.4). Error says cannot get valid IP address. Have reset Siemens SpeedStream 4100 several time, even with tech support from the big "A" DSL provider. Plug MacBook Pro directly into modem and works fine. Unplugged AirPort, even reset it, still no luck. A bad Express?? or am not looking in the right place to make connection. Was working fine up until Sunday.

    Connect the AirPort Express (AX) to the cable modem via Ethernet cable.
    In configuring the AX using AirPort Utility:
    Under Internet, set the connection to be Ethernet using DHCP.
    Under Connection Sharing, set it to distribute a range of IP addresses.
    Under AirPort>Wireless, set the Wireless Mode to Create a wireless network, and fill in the remaining settings in the same window. Until you get it working, you might want to set Wireless Security to None.

  • HT4623 I have iPhone 4S.   I am not getting wifi.  Upper left corner shows all bars but also 3G  not wifi icon

    I have iPhone 4S not getting wifi signal ever.  Even though I'm showing all bars

    If it shows 3g icon means you have not connected to wifi. Go into settings > wifi and tap on your home wifi/wifi network that you are wanting to connect to. Put in the password if that network requires one and then you will have a wifi symbol instead of 3g.

  • 11g R2(11.2.0.2)-Not able to connect using SID - Win 7 32 bit

    Hi Experts,
    I have installed 11gR2(11.2.0.2) on Win 7 32 bit OS.
    I am able to start database and listener services without any problem. ORACLE_BASE and ORACLE_HOME variables are set.
    I am even able to connect to database using "sqlplus user/pass". (With ORACLE_SID variable set)
    However, sqlplus command hangs when I try to connect using SID "sqlplus user/pass@o11gr2".
    (No error, after waiting for >20 minutes I have to kill the command.)
    =================
    Following in "C:\Oracle\product\11.2.0.2\dbhome_3\RDBMS\trace\o11gr2_ora_6352.trc"
    - "2012-04-05 09:50:55.846: [ default]ut_read_reg:2:ocr registry key SOFTWARE\Oracle\ocr cannot be opened. error 2"
    Following in "C:\Oracle\product\11.2.0.2\dbhome_3\log\machinename\client"
    - 2012-04-26 14:35:18.781: [ default][1216]ut_read_reg:2:ocr registry key SOFTWARE\Oracle\olr cannot be opened. error 2
    [    CLSE][1216]clse_get_crs_home: Error retrieving OLR configuration [0] [Error opening olr registry key. The system cannot find the file specified.
    "tnsping" returns OK for "tnsping o11gr2", "tnsping localhost", "tnsping 127.0.0.1", "tnsping 192.168.0.1"
    Output of LSNRCTL:
    LSNRCTL> status
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=J1009615W7LT.jda.corp.local)(PORT=1521)))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for 32-bit Windows: Version 11.2.0.2.0 - Production
    Start Date 26-APR-2012 14:35:17
    Uptime 0 days 0 hr. 4 min. 6 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File C:\Oracle\product\11.2.0.2\dbhome_3\network\admin\listener.ora
    Listener Log File C:\Oracle\diag\tnslsnr\J1009615W7LT\listener\alert\log.xml
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=J1009615W7LT.jda.corp.local)(PORT=1521)))
    Services Summary...
    Service "O11GR2" has 2 instance(s).
    Instance "O11GR2", status UNKNOWN, has 1 handler(s) for this service...
    Instance "O11GR2", status READY, has 1 handler(s) for this service...
    The command completed successfully
    =================
    This was working earlier. One day it stopped working all of a suddent and I am not able to connect using SID till now.
    I tried re-installing in different home multiple times. But no luck even after disabling firewall completely.
    Any suggest/help is greatly appreciated on this.

    ------------------------------tnsping-------------------------
    C:\>tnsping o11gr2
    TNS Ping Utility for 32-bit Windows: Version 11.2.0.2.0 - Production on 26-APR-2012 14:54:32
    Copyright (c) 1997, 2010, Oracle. All rights reserved.
    Used parameter files:
    C:\Oracle\product\11.2.0.2\dbhome_3\network\admin\sqlnet.ora
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = J1009615W7LT.jda.corp.local)(PORT = 1521
    ))) (CONNECT_DATA = (SERVICE_NAME = O11GR2)))
    OK (30 msec)
    C:\>
    -----------------------------ping-------------------------------
    C:\>ping J1009615W7LT.jda.corp.local
    Pinging J1009615W7LT.jda.corp.local [fe80::20c9:b748:311a:95e4%14] with 32 bytes of data:
    Reply from fe80::20c9:b748:311a:95e4%14: time<1ms
    Reply from fe80::20c9:b748:311a:95e4%14: time<1ms
    Reply from fe80::20c9:b748:311a:95e4%14: time<1ms
    Reply from fe80::20c9:b748:311a:95e4%14: time<1ms
    Ping statistics for fe80::20c9:b748:311a:95e4%14:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
    Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 0ms, Average = 0ms
    C:\>ping 10.60.200.221
    Pinging 10.60.200.221 with 32 bytes of data:
    Reply from 10.60.200.221: bytes=32 time<1ms TTL=64
    Reply from 10.60.200.221: bytes=32 time<1ms TTL=64
    Reply from 10.60.200.221: bytes=32 time<1ms TTL=64
    Reply from 10.60.200.221: bytes=32 time<1ms TTL=64
    Ping statistics for 10.60.200.221:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
    Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 0ms, Average = 0ms
    C:\>
    -----------------------------C:\Oracle\diag\tnslsnr\J1009615W7LT\listener\alert\log.xml---------------------------------
    </msg>
    <msg time='2012-04-26T14:35:18.855-04:00' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='J1009615W7LT'
    host_addr='fe80::20c9:b748:311a:95e4%14'>
    <txt>
    TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
    </txt>
    </msg>
    <msg time='2012-04-26T14:35:26.200-04:00' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='J1009615W7LT'
    host_addr='fe80::20c9:b748:311a:95e4%14'>
    <txt>26-APR-2012 14:35:26 * ping * 0
    </txt>
    </msg>
    <msg time='2012-04-26T14:35:43.204-04:00' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='J1009615W7LT'
    host_addr='fe80::20c9:b748:311a:95e4%14'>
    <txt>26-APR-2012 14:35:43 * ping * 0
    </txt>
    </msg>
    <msg time='2012-04-26T14:35:55.952-04:00' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='J1009615W7LT'
    host_addr='fe80::20c9:b748:311a:95e4%14'>
    <txt>Dynamic address is already listened on (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=J1009615W7LT.jda.corp.local)(PORT=1521)))
    </txt>
    </msg>
    <msg time='2012-04-26T14:35:55.953-04:00' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='J1009615W7LT'
    host_addr='fe80::20c9:b748:311a:95e4%14'>
    <txt>26-APR-2012 14:35:55 * service_register * O11GR2 * 0
    </txt>
    </msg>
    <msg time='2012-04-26T14:37:08.732-04:00' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='J1009615W7LT'
    host_addr='fe80::20c9:b748:311a:95e4%14'>
    <txt>26-APR-2012 14:37:08 * ping * 0
    </txt>
    </msg>
    <msg time='2012-04-26T14:38:34.943-04:00' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='J1009615W7LT'
    host_addr='fe80::20c9:b748:311a:95e4%14'>
    <txt>26-APR-2012 14:38:34 * (CONNECT_DATA=(SERVICE_NAME=O11GR2)(CID=(PROGRAM=C:\oracle\product\11.2.0.2\dbhome_3\bin\sqlplus.exe)(HOST=J1009615W7LT)(USER=j1009615))) * (ADDRESS=(PROTOCOL=tcp)(HOST=fe80::20c9:b748:311a:95e4%14)(PORT=51907)) * establish * O11GR2 * 0
    </txt>
    </msg>
    <msg time='2012-04-26T14:39:23.627-04:00' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='J1009615W7LT'
    host_addr='fe80::20c9:b748:311a:95e4%14'>
    <txt>WARNING: Subscription for node down event still pending
    </txt>
    </msg>
    <msg time='2012-04-26T14:39:23.628-04:00' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='J1009615W7LT'
    host_addr='fe80::20c9:b748:311a:95e4%14'>
    <txt>26-APR-2012 14:39:23 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=j1009615))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=186647040)) * status * 0
    </txt>
    </msg>
    <msg time='2012-04-26T14:54:25.550-04:00' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='J1009615W7LT'
    host_addr='fe80::20c9:b748:311a:95e4%14'>
    <txt>System parameter file is C:\Oracle\product\11.2.0.2\dbhome_3\network\admin\listener.ora
    </txt>
    </msg>
    <msg time='2012-04-26T14:54:25.551-04:00' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='J1009615W7LT'
    host_addr='fe80::20c9:b748:311a:95e4%14'>
    <txt>Log messages written to C:\Oracle\diag\tnslsnr\J1009615W7LT\listener\alert\log.xml
    </txt>
    </msg>
    <msg time='2012-04-26T14:54:25.552-04:00' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='J1009615W7LT'
    host_addr='fe80::20c9:b748:311a:95e4%14'>
    <txt>Trace information written to C:\Oracle\diag\tnslsnr\J1009615W7LT\listener\trace\ora_11640_3776.trc
    </txt>
    </msg>
    <msg time='2012-04-26T14:54:25.553-04:00' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='J1009615W7LT'
    host_addr='fe80::20c9:b748:311a:95e4%14'>
    <txt>Trace level is currently 0
    </txt>
    </msg>
    <msg time='2012-04-26T14:54:25.553-04:00' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='J1009615W7LT'
    host_addr='fe80::20c9:b748:311a:95e4%14'>
    <txt>
    </txt>
    </msg>
    <msg time='2012-04-26T14:54:25.555-04:00' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='J1009615W7LT'
    host_addr='fe80::20c9:b748:311a:95e4%14'>
    <txt>Started with pid=11640
    </txt>
    </msg>
    <msg time='2012-04-26T14:54:25.560-04:00' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='J1009615W7LT'
    host_addr='fe80::20c9:b748:311a:95e4%14'>
    <txt>Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=J1009615W7LT.jda.corp.local)(PORT=1521)))
    </txt>
    </msg>
    <msg time='2012-04-26T14:54:26.695-04:00' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='J1009615W7LT'
    host_addr='fe80::20c9:b748:311a:95e4%14'>
    <txt>Listener completed notification to CRS on start
    </txt>
    </msg>
    <msg time='2012-04-26T14:54:26.712-04:00' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='J1009615W7LT'
    host_addr='fe80::20c9:b748:311a:95e4%14'>
    <txt>
    TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
    </txt>
    </msg>
    <msg time='2012-04-26T14:54:29.880-04:00' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='J1009615W7LT'
    host_addr='fe80::20c9:b748:311a:95e4%14'>
    <txt>Dynamic address is already listened on (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=J1009615W7LT.jda.corp.local)(PORT=1521)))
    </txt>
    </msg>
    <msg time='2012-04-26T14:54:29.881-04:00' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='J1009615W7LT'
    host_addr='fe80::20c9:b748:311a:95e4%14'>
    <txt>26-APR-2012 14:54:29 * service_register * O11GR2 * 0
    </txt>
    </msg>
    <msg time='2012-04-26T14:54:32.090-04:00' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='J1009615W7LT'
    host_addr='fe80::20c9:b748:311a:95e4%14'>
    <txt>26-APR-2012 14:54:32 * ping * 0
    </txt>
    </msg>
    Edited by: 850920 on Apr 26, 2012 11:59 AM

  • Post Moved Galaxy-Note-dropping-Wifi-when-using-...

    Pot moved http://community.bt.com/t5/Other-BB-Queries/Galaxy-Note-dropping-Wifi-when-using-HH3/td-p/671308
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

    I think I found the answer to my own question (no thanks to Verizon)!
    I found this article online which was written recently (2012) and explains the WIFI - Bluetooth interference pretty well. Here is the link:
    http://www.ecnmag.com/articles/2012/03/wi-fi-and-bluetooth-coexistence
    The way it has been explained is that if the WIFI & BT radios are on the same chip and using the same antena to send and receive, they WILL interfere no matter what. Having them on two different chips is the best way. But Frequency Isolation (Adaptive Frequency Hopping (AFH)) is a way to reduce interference when they are both on the same chip (as it is in Galaxy Note 2 & S3 - they have Broadcom BCM4330 for wifi/bluethooth/FM) which I guess needs to be addressed in a software update (or may be it already has and is not working well). The last solution is to use 5GHz band for WIFI.
    There you have it. But please let me know what you think and if you have found out anything else.
    Thanks

  • HT1695 my i phone not support wifi connection it was grey colour it was not active

    Hi
    My i phone not support wifi connection it was grey colour it was not active
    please help me

    Your WiFi chip has likely failed.  Bring your phone to Apple for evaluation.

  • My Mum( a pensioner) is wanting to purchase both an iPhone and iPad.  What is the best way for her to manage her data /calls/txt etc. obviously the cost needs to be as low as possible.  Currently does not have WiFi but uses dongle

    My Mum( a pensioner) is wanting to purchase both an iPhone and iPad.  What is the best way for her to manage her data /calls/txt etc. obviously the cost needs to be as low as possible.  Currently does not have WiFi but uses dongle

    My Mum( a pensioner) is wanting to purchase both an iPhone and iPad.  What is the best way for her to manage her data /calls/txt etc. obviously the cost needs to be as low as possible.  Currently does not have WiFi but uses dongle

Maybe you are looking for