IPhone5s package stolen form front porch, how to find its serial and IMEI#'s

I had my brand new iPhone5s stolen off my front porch still in its FedEx box. The police are asking me for the phones serial# and IMEI#. I do not have the phone or the box and it was never activated. I asked Verizon for these numbers and they said that the serial#, IMEI# and MEID# are all the same number. She also gave me an SIM# which I have no idea what that is. Is what Verizon is saying correct? Are the serial#, IMEI# and MEID# are all the same number? If not how can I get this information without the phone or box to reference?

Thanks, this helps clear things up a bit. So if Verizon has no knowledge of the serial number how should I go about aquiering it? Is this something I will have to find by contacting Apple directly? I should note that I dont have insurace on the phone though Apple so I may not be able to even have that conversation with them without paying them a fee.

Similar Messages

  • I bought an iPod touch 5th gen and it was recently stolen. Can I track it by its Serial Number?

    I haven't even had it for that long and it was stolen right out of my bag, It was really expensive and I have a lot of important info on it. Please help me find out if it is trackable so to speak.

    Not by SN
    lost/stolen                                      
    No app is required.                                               
    - If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
    iCloud: Find My iPhone
    - You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
    and go to FIndMyiPhone. If the iPod has been restored it will never show up.
    iCloud: Find My iPhone
    - You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
    - If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
    - Change the passwords for all accounts used on the iPod and report to police
    - There is no way to prevent someone from restoring the iPod (it erases it) using it unless you had iOS 7 on the device. With iOS 7, one has to enter the Apple ID and password to restore the device.
    - Apple will do nothing without a court order                                                        
    Reporting a lost or stolen Apple product                                               
    - iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

  • How to find ipod serial number on itunes?

    i need to find out what my serial number was for a stolen ipod. how can i do this on itunes?

    See:
    iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

  • How to find my iphone4 using imei

    how can i find my iphone4 by using emei number

    You can't. Why do you need the IMEI? Here are ways to find it: iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

  • How to find BADI Defination and Implemantation from Method of BADI?

    HI,
       can anyone tell me that how to find BADI Defination and Implemantation from Method of BADI?

    & Report  ZPJA_PM002 (V2)                                            &
    & Text Elements:                                                     &
    & P_DEVC Show user-exits from development class                      &
    & P_LIMIT Limit submit program selection                             &
    & P_FUNC Show function modules                                       &
    & P_SUBM Show submit programs                                        &
    & S01    Selection data (TCode takes precedence  over program name)  &
    report  zpja_pm002
      no standard page heading
      line-size 158.
    *tables: enlfdir.     "Additional Attributes for Function Modules
    data: tabix      like sy-tabix,
          w_linnum   type i,
          w_off      type i,
          w_index    like sy-tabix,
          w_include  like trdir-name,
          w_prog     like trdir-name,
          w_incl     like trdir-name,
          w_area     like rs38l-area,
          w_level,
          w_str(50)  type c,
          w_funcname like tfdir-funcname.
    constants: c_fmod(40) type c value 'Function modules selected: ',
               c_subm(40) type c value 'Submit programs selected: ',
               c_col1(12) type c value 'Enhanmt Type',
               c_col2(40) type c value 'Enhancement',
               c_col3(30) type c value 'Program/Include',
               c_col4(20) type c value 'Enhancement Name',
               c_col5(40) type c value 'Enhancement Description'.
    Work Areas: ABAP Workbench
    data: begin of wa_d010inc.
    data: master type d010inc-master.
    data: end of wa_d010inc.
    data: begin of wa_tfdir.
    data: funcname type tfdir-funcname,
          pname    type tfdir-pname,
          include  type tfdir-include.
    data: end of wa_tfdir.
    data: begin of wa_tadir.
    data: devclass type tadir-devclass.
    data: end of wa_tadir.
    data: begin of wa_tstc.
    data: pgmna type tstc-pgmna.
    data: end of wa_tstc.
    data: begin of wa_tstcp.
    data: param type tstcp-param.
    data: end of wa_tstcp.
    data: begin of wa_enlfdir.
    data: area type enlfdir-area.
    data: end of wa_enlfdir.
    Work Areas: BADIs
    data: begin of wa_sxs_attr.
    data: exit_name type sxs_attr-exit_name.
    data: end of wa_sxs_attr.
    data: begin of wa_sxs_attrt.
    data: text type sxs_attrt-text.
    data: end of wa_sxs_attrt.
    Work Areas: Enhancements
    data: begin of wa_modsap.
    data: member type modsap-member.
    data: end of wa_modsap.
    data: begin of wa_modsapa.
    data: name type modsapa-name.
    data: end of wa_modsapa.
    data: begin of wa_modsapt.
    data: modtext type modsapt-modtext.
    data: end of wa_modsapt.
    Work Areas: Business Transaction Events
    data: begin of wa_tbe01t.
    data: text1 type tbe01t-text1.
    data: end of wa_tbe01t.
    data: begin of wa_tps01t.
    data: text1 type tps01t-text1.
    data: end of wa_tps01t.
    user-exits
    types: begin of t_userexit,
          type(12) type c,
          pname    like trdir-name,
          txt(300),
          level    type c,
          modname(30) type c,
          modtext(40) type c,
    end of t_userexit.
    data: i_userexit type standard table of t_userexit with header line.
    Function module developmnet classes
    types: begin of t_devclass,
          clas   like trdir-clas,
    end of t_devclass.
    data: i_devclass type standard table of t_devclass with header line.
    Submit programs
    types: begin of t_submit,
          pname     like trdir-name,
          level,
          done,
    end of t_submit.
    data: i_submit type standard table of t_submit with header line.
    Source code
    types: begin of t_sourcetab,                        "#EC * (SLIN lügt!)
            line(200),                                  "#EC * (SLIN lügt!)
          end of t_sourcetab.                           "#EC * (SLIN lügt!)
    data: sourcetab type standard table of t_sourcetab with header line.
    data c_overflow(30000) type c.
    Description of an ABAP/4 source analysis token
    data: i_stoken type standard table of stokex with header line.
    data wa_stoken like i_stoken.
    Description of an ABAP/4 source analysis statement
    data: i_sstmnt type standard table of sstmnt with header line."#EC
    keywords for searching ABAP code
    types: begin of t_keywords,
          word(30),
    end of t_keywords.
    data: keywords type standard table of t_keywords with header line.
    function modules within program
    types: begin of t_fmodule,
          name   like rs38l-name,
          pname  like trdir-name,
          pname2 like trdir-name,
          level,
          bapi,
          done,
    end of t_fmodule.
    data: i_fmodule type standard table of t_fmodule with header line.
    & Selection Options                                                  &
    selection-screen begin of block selscr1 with frame title text-s01.
    parameter: p_pname like trdir-name memory id rid,
               p_tcode like syst-tcode,
               p_limit(4) type n default 100,
               p_devc  like rihea-dy_ofn default ' ',
               p_func  like rihea-dy_ofn default ' ',
               p_subm  like rihea-dy_ofn default ' '.
    selection-screen end of block selscr1.
    & START-OF-SELECTION                                                 &
    start-of-selection.
      if p_pname is initial and p_tcode is initial.
        message e008(hrfpm).  "Make entry on the selection screen
        stop.
      endif.
    ensure P_LIMIT is not zero.
      if p_limit = 0.
        p_limit = 1.
      endif.
      perform data_select.
      perform get_submit_data.
      perform get_fm_data.
      perform get_additional_data.
      perform data_display.
    & Form DATA_SELECT                                                   &
    form data_select.
    data selection message to sap gui
      call function 'SAPGUI_PROGRESS_INDICATOR'
        destination 'SAPGUI'
        keeping logical unit of work
        exporting
          text                  = 'Get programs/includes'       "#EC NOTEXT
        exceptions
          system_failure
          communication_failure
        .                                                       "#EC *
    determine search words
      keywords-word = 'CALL'.
      append keywords.
      keywords-word = 'FORM'.
      append keywords.
      keywords-word = 'PERFORM'.
      append keywords.
      keywords-word = 'SUBMIT'.
      append keywords.
      keywords-word = 'INCLUDE'.
      append keywords.
      if not p_tcode is initial.
    get program name from TCode
        select single pgmna from tstc into wa_tstc-pgmna
                     where tcode eq p_tcode.
        if not wa_tstc-pgmna is initial.
          p_pname = wa_tstc-pgmna.
    TCode does not include program name, but does have refereve TCode
        else.
          select single param from tstcp into wa_tstcp-param
                       where tcode eq p_tcode.
          if sy-subrc = 0.
            check wa_tstcp-param(1)   = '/'.
            check wa_tstcp-param+1(1) = '*'.
            if wa_tstcp-param ca ' '.
            endif.
            w_off = sy-fdpos + 1.
            subtract 2 from sy-fdpos.
            if sy-fdpos gt 0.
              p_tcode = wa_tstcp-param+2(sy-fdpos).
            endif.
            select single pgmna from tstc into wa_tstc-pgmna
                   where tcode eq p_tcode.
            p_pname = wa_tstc-pgmna.
            if sy-subrc <> 0.
              message e110(/saptrx/asc) with 'No program found for: '
    p_tcode."#EC NOTEXT
              stop.
            endif.
          else.
            message e110(/saptrx/asc) with 'No program found for: ' p_tcode.
    "#EC NOTEXT
            stop.
          endif.
        endif.
      endif.
    Call customer-function aus Program coding
      read report p_pname into sourcetab.
      if sy-subrc > 0.
        message e017(enhancement) with p_pname raising no_program."#EC *
      endif.
      scan abap-source sourcetab tokens     into i_stoken
                                 statements into i_sstmnt
                                 keywords   from keywords
                                 overflow into c_overflow
                                 with includes.
                                 WITH ANALYSIS.
      if sy-subrc > 0. "keine/syntakt. falsche Ablauflog./Fehler im Skanner
        message e130(enhancement) raising syntax_error.         "#EC *
      endif.
    check I_STOKEN for entries
      clear w_linnum.
      describe table i_stoken lines w_linnum.
      if w_linnum gt 0.
        w_level = '0'.
        w_prog = ''.
        w_incl = ''.
        perform data_search tables i_stoken using w_level w_prog w_incl.
      endif.
    endform.                        "DATA_SELECT
    & Form GET_FM_DATA                                                   &
    form get_fm_data.
    data selection message to sap gui
      call function 'SAPGUI_PROGRESS_INDICATOR'
        destination 'SAPGUI'
        keeping logical unit of work
        exporting
          text                  = 'Get function module data'    "#EC NOTEXT
        exceptions
          system_failure
          communication_failure
        .                                                       "#EC *
    Function module data
      sort i_fmodule by name.
      delete adjacent duplicates from i_fmodule comparing name.
      loop at i_fmodule where done  ne 'X'.
        clear:   i_stoken, i_sstmnt, sourcetab, wa_tfdir, w_include .
        refresh: i_stoken, i_sstmnt, sourcetab.
        clear wa_tfdir.
        select single funcname pname include from tfdir into wa_tfdir
                                where funcname = i_fmodule-name.
        check sy-subrc = 0.
        call function 'FUNCTION_INCLUDE_SPLIT'
          exporting
            program = wa_tfdir-pname
          importing
            group   = w_area.
        concatenate 'L' w_area 'U' wa_tfdir-include into w_include.
        i_fmodule-pname  = w_include.
        i_fmodule-pname2 = wa_tfdir-pname.
        modify i_fmodule.
        read report i_fmodule-pname into sourcetab.
        if sy-subrc = 0.
          scan abap-source sourcetab tokens     into i_stoken
                                     statements into i_sstmnt
                                     keywords   from keywords
                                     with includes.
          if sy-subrc > 0.
            message e130(enhancement) raising syntax_error.
          endif.
    check i_stoken for entries
          clear w_linnum.
          describe table i_stoken lines w_linnum.
          if w_linnum gt 0.
            w_level = '1'.
            w_prog  = i_fmodule-pname2.
            w_incl =  i_fmodule-pname.
            perform data_search tables i_stoken using w_level w_prog w_incl.
          endif.
        endif.
      endloop.
      if p_devc = 'X'.
        loop at i_fmodule.
          clear: wa_tadir, wa_enlfdir.
          select single area from enlfdir into wa_enlfdir-area
                                where funcname = i_fmodule-name.
          check not wa_enlfdir-area is initial.
          select single devclass into wa_tadir-devclass
                          from tadir where pgmid    = 'R3TR'
                                       and object   = 'FUGR'
                                       and obj_name = wa_enlfdir-area.
          check not wa_tadir-devclass is initial.
          move wa_tadir-devclass to i_devclass-clas.
          append i_devclass.
          i_fmodule-done = 'X'.
          modify i_fmodule.
        endloop.
        sort i_devclass.
        delete adjacent duplicates from i_devclass.
      endif.
    endform.                        "GET_FM_DATA
    & Form GET_SUBMIT_DATA                                               &
    form get_submit_data.
    data selection message to sap gui
      call function 'SAPGUI_PROGRESS_INDICATOR'
        destination 'SAPGUI'
        keeping logical unit of work
        exporting
          text                  = 'Get submit data'             "#EC NOTEXT
        exceptions
          system_failure
          communication_failure
        .                                                       "#EC *
      sort i_submit.
      delete adjacent duplicates from i_submit comparing pname.
      w_level = '0'.
      loop at i_submit where done ne 'X'.
        clear:   i_stoken, i_sstmnt, sourcetab.
        refresh: i_stoken, i_sstmnt, sourcetab.
        read report i_submit-pname into sourcetab.
        if sy-subrc = 0.
          scan abap-source sourcetab tokens     into i_stoken
                                     statements into i_sstmnt
                                     keywords   from keywords
                                     with includes.
          if sy-subrc > 0.
           message e130(enhancement) raising syntax_error.
            continue.
          endif.
    check i_stoken for entries
          clear w_linnum.
          describe table i_stoken lines w_linnum.
          if w_linnum gt 0.
            w_prog  = i_submit-pname.
            w_incl = ''.
            perform data_search tables i_stoken using w_level w_prog w_incl.
          endif.
        endif.
    restrict number of submit program selected for processing
        describe table i_submit lines w_linnum.
        if w_linnum ge p_limit.
          w_level = '1'.
        endif.
        i_submit-done = 'X'.
        modify i_submit.
      endloop.
    endform.                       "GET_SUBMIT_DATA
    & Form DATA_SEARCH                                                   &
    form data_search tables p_stoken structure stoken
                            using p_level p_prog p_incl.
      loop at p_stoken.
        clear i_userexit.
        tabix = sy-tabix + 1.
        i_userexit-level = p_level.
        if i_userexit-level = '0'.
          if p_incl is initial.
            i_userexit-pname = p_pname.
          else.
            concatenate  p_pname '/' p_incl into i_userexit-pname.
          endif.
        else.
          if p_incl is initial.
            i_userexit-pname = p_prog.
          else.
            concatenate  p_prog '/' p_incl into i_userexit-pname.
          endif.
        endif.
    Include
        if p_stoken-str eq 'INCLUDE'.
          check p_level eq '0'.    " do not perform for function modules
    *(2nd pass)
          w_index = sy-tabix + 1.
          read table p_stoken index w_index into wa_stoken.
          check not wa_stoken-str cs 'STRUCTURE'.
          check not wa_stoken-str cs 'SYMBOL'.
          read table i_submit with key pname = wa_stoken-str.
          if sy-subrc <> 0.
            i_submit-pname = wa_stoken-str.
            i_submit-level = p_level.
            append i_submit.
          endif.
        endif.
    Enhancements
        if p_stoken-str eq 'CUSTOMER-FUNCTION'.
          clear w_funcname.
          read table p_stoken index tabix.
          translate p_stoken-str using ''' '.
          condense p_stoken-str.
          if p_prog is initial.
            concatenate 'EXIT' p_pname p_stoken-str into w_funcname
                         separated by '_'.
          else.
            concatenate 'EXIT' p_prog p_stoken-str into w_funcname
                   separated by '_'.
          endif.
          select single member from modsap into wa_modsap-member
                where member = w_funcname.
          if sy-subrc = 0.   " check for valid enhancement
            i_userexit-type = 'Enhancement'.
            i_userexit-txt  = w_funcname.
            append i_userexit.
          else.
            clear wa_d010inc.
            select single master into wa_d010inc-master
                  from d010inc
                     where include = p_prog.
            concatenate 'EXIT' wa_d010inc-master p_stoken-str into
    w_funcname
                   separated by '_'.
            i_userexit-type = 'Enhancement'.
            i_userexit-txt  = w_funcname.
          endif.
        endif.
    BADIs
        if p_stoken-str cs 'cl_exithandler='.
          w_index = sy-tabix + 4.
          read table p_stoken index w_index into wa_stoken.
          i_userexit-txt = wa_stoken-str.
          replace all occurrences of '''' in i_userexit-txt with space.
          i_userexit-type = 'BADI'.
          append i_userexit.
        endif.
    Business transaction events
        if p_stoken-str cs 'OPEN_FI_PERFORM'.
          i_userexit-type = 'BusTrEvent'.
          i_userexit-txt = p_stoken-str.
          replace all occurrences of '''' in i_userexit-txt with space.
          i_userexit-modname =  i_userexit-txt+16(8).
          case i_userexit-txt+25(1).
            when 'E'.
              clear wa_tbe01t.
              select single text1 into wa_tbe01t-text1 from tbe01t
                               where event = i_userexit-txt+16(8)
                                 and spras = sy-langu.
              if wa_tbe01t-text1 is initial.
                i_userexit-modtext = ''.            "#EC NOTEXT
              else.
                i_userexit-modtext = wa_tbe01t-text1.
              endif.
              i_userexit-modname+8 = '/P&S'.                    "#EC NOTEXT
            when 'P'.
              clear wa_tps01t.
              select single text1 into wa_tps01t-text1 from tps01t
                               where procs = i_userexit-txt+16(8)
                                 and spras = sy-langu.
              i_userexit-modtext = wa_tps01t-text1.
              i_userexit-modname+8 = '/Process'.
          endcase.
          append i_userexit.
        endif.
    Program exits
        if p_stoken-str cs 'USEREXIT_'.
          i_userexit-type = 'Program Exit'.
          i_userexit-txt = p_stoken-str.
          replace all occurrences of '''' in i_userexit-txt with space.
          append i_userexit.
        endif.
    Submit programs
        if p_stoken-str cs 'SUBMIT'.
          check p_level eq '0'.    " do not perform for function modules
    *(2nd pass)
          check not p_stoken-str cs '_'.   " ensure not SUBMIT_XXX
          w_index = sy-tabix + 1.
          read table p_stoken index w_index into wa_stoken.
          check not wa_stoken-str cs '_'.   " ensure not SUBMIT_XXX
          replace all occurrences of '''' in wa_stoken-str with space.
          read table i_submit with key pname = wa_stoken-str.
          if sy-subrc <> 0.
            i_submit-pname = wa_stoken-str.
            i_submit-level = p_level.
            append i_submit.
          endif.
        endif.
    Perform routines (which reference external programs)
        if p_stoken-str cs 'PERFORM'.
          check p_level eq '0'.    " do not perform for function modules
    *(2nd pass)
          w_index = sy-tabix + 1.
          read table p_stoken index w_index into wa_stoken.
          if not wa_stoken-ovfl is initial.
            w_off = wa_stoken-off1 + 10.
            w_str = c_overflow+w_off(30).
            find ')' in w_str match offset w_off.
            w_off = w_off + 1.
            wa_stoken-str = w_str(w_off).
          endif.
          check wa_stoken-str cs '('.
          w_off = 0.
          while sy-subrc  = 0.
            if wa_stoken-str+w_off(1) eq '('.
              replace section offset w_off length 1 of wa_stoken-str with ''
              replace all occurrences of ')' in wa_stoken-str with space.
              read table i_submit with key pname = wa_stoken-str.
              if sy-subrc <> 0.
                i_submit-pname = wa_stoken-str.
                append i_submit.
              endif.
              exit.
            else.
              replace section offset w_off length 1 of wa_stoken-str with ''
              shift wa_stoken-str left deleting leading space.
            endif.
          endwhile.
        endif.
    Function modules
        if p_stoken-str cs 'FUNCTION'.
          clear i_fmodule.
          check p_level eq '0'.    " do not perform for function modules
    *(2nd pass)
          w_index = sy-tabix + 1.
          read table p_stoken index w_index into wa_stoken.
         if wa_stoken-str cs 'WF_'.
         if wa_stoken-str cs 'IF_'.
           break-point.
         endif.
          if wa_stoken-str cs 'BAPI'.
            i_fmodule-bapi = 'X'.
          endif.
          replace first occurrence of '''' in wa_stoken-str with space.
          replace first occurrence of '''' in wa_stoken-str with space.
          if sy-subrc = 4.   " didn't find 2nd quote (ie name truncated)
            clear wa_tfdir.
            concatenate wa_stoken-str '%' into wa_stoken-str.
            select single funcname into wa_tfdir-funcname from tfdir
                         where funcname like wa_stoken-str.
            if sy-subrc = 0.
              i_fmodule-name = wa_tfdir-funcname.
            else.
              continue.
            endif.
          else.
            i_fmodule-name = wa_stoken-str.
          endif.
          i_fmodule-level = p_level.
          append i_fmodule.
        endif.
      endloop.
    endform.                        "DATA_SEARCH
    & Form GET_ADDITIONAL_DATA                                           &
    form get_additional_data.
    data selection message to sap gui
      call function 'SAPGUI_PROGRESS_INDICATOR'
        destination 'SAPGUI'
        keeping logical unit of work
        exporting
          text                  = 'Get additional data'         "#EC NOTEXT
        exceptions
          system_failure
          communication_failure
        .                                                       "#EC *
      loop at i_userexit.
    Enhancement data
        if  i_userexit-type cs 'Enh'.
          clear: wa_modsapa.
          select single name into wa_modsapa-name from modsap
                            where member = i_userexit-txt.
          check sy-subrc = 0.
          i_userexit-modname = wa_modsapa-name.
          clear wa_modsapt.
          select single modtext into wa_modsapt-modtext from modsapt
                            where name = wa_modsapa-name
                                         and sprsl = sy-langu.
          i_userexit-modtext = wa_modsapt-modtext.
        endif.
    BADI data
        if  i_userexit-type eq 'BADI'.
          clear wa_sxs_attr.
          select single exit_name into wa_sxs_attr-exit_name from sxs_attr
                                        where exit_name = i_userexit-txt.
          if sy-subrc = 0.
            i_userexit-modname = i_userexit-txt.
          else.
            i_userexit-modname = 'Dynamic call'.                "#EC NOTEXT
          endif.
          clear wa_sxs_attrt.
          select single text into wa_sxs_attrt-text from sxs_attrt
                                         where exit_name =
    wa_sxs_attr-exit_name
                                           and sprsl = sy-langu.
          i_userexit-modtext = wa_sxs_attrt-text.
        endif.
        modify i_userexit.
      endloop.
    get enhancements via program package
      clear wa_tadir.
      select single devclass into wa_tadir-devclass from tadir
                                 where pgmid    = 'R3TR'
                                   and object   = 'PROG'
                                   and obj_name = p_pname.
      if sy-subrc = 0.
        clear: wa_modsapa, wa_modsapt.
        select name from modsapa into wa_modsapa-name
                              where devclass = wa_tadir-devclass.
          select single modtext from modsapt into wa_modsapt-modtext
                              where name = wa_modsapa-name
                                and sprsl = sy-langu.
          read table i_userexit with key modname = wa_modsapa-name.
          if sy-subrc <> 0.
            i_userexit-modtext = wa_modsapt-modtext.
            i_userexit-type = 'Enhancement'.                    "#EC NOTEXT
            i_userexit-modname  = wa_modsapa-name.
            i_userexit-txt = 'Determined from program DevClass'."#EC NOTEXT
            i_userexit-pname = 'Unknown'.                       "#EC NOTEXT
            append i_userexit.
          endif.
        endselect.
      endif.
    endform.                        "GET_ADDITIONAL_DATA
    & Form DATA_DISPLAY                                                  &
    form data_display.
    data selection message to sap gui
      call function 'SAPGUI_PROGRESS_INDICATOR'
        destination 'SAPGUI'
        keeping logical unit of work
        exporting
          text                  = 'Prepare screen for display'  "#EC NOTEXT
        exceptions
          system_failure
          communication_failure
        .                                                       "#EC *
      sort i_userexit by type txt modname.
      delete adjacent duplicates from i_userexit comparing txt modname.
    format headings
      write: 'Enhancements from main program'.                  "#EC NOTEXT
      write: /.
      uline.
      format color col_heading.
      write: /    sy-vline,
             (12) c_col1,                    "Enhanmt Type
                  sy-vline,
             (40) c_col2,                    "Enhancement
                  sy-vline,
             (30) c_col3,                    "Program/Include
                  sy-vline,
             (20) c_col4,                    "Enhancement name
                  sy-vline,
             (40) c_col5,                    "Enhancement description
                  sy-vline.
      format reset.
      uline.
    format lines
      loop at i_userexit.
    set line colour
        case i_userexit-type.
          when 'Enhancement'.
            format color 3 intensified off.
          when 'BADI'.
            format color 4 intensified off.
          when 'BusTrEvent'.
            format color 5 intensified off.
          when 'Program Exit'.
            format color 6 intensified off.
          when others.
            format reset.
        endcase.
        write: / sy-vline,
                 i_userexit-type,
                 sy-vline,
                 i_userexit-txt(40),
                 sy-vline,
                 i_userexit-pname(30),
                 sy-vline,
                 i_userexit-modname(20),
                 sy-vline,
                 i_userexit-modtext(40),
                 sy-vline.
      endloop.
      format reset.
      uline.
    user-exits from development class of function modules
      if p_devc = 'X'.
        write: /.
        write: / 'User-exits from function module development class'."#EC
    *NOTEXT
        write: 157''.
        uline (90).
        write: 157''.
        loop at i_devclass.
          clear wa_modsapa.
          select name from modsapa into wa_modsapa
                       where devclass = i_devclass-clas.
         select single name modtext into corresponding fields of wa_modsapt
                                       from modsapt
                                         where name  = wa_modsapa-name
                                           and sprsl = sy-langu.
            format color 3 intensified off.
            write: / sy-vline,
                     (12) 'Enhancement',
                     sy-vline,
                    wa_modsapa-name,
                    sy-vline,
                    wa_modsapt-modtext,
                    sy-vline.
          endselect.
        endloop.
        uline (90).
        format reset.
      endif.
      describe table i_fmodule lines w_linnum.
      write: / c_fmod , at 35 w_linnum.                         "#EC NOTEXT
      write: 157''.
      if p_func = 'X'.
    display fuction modules used in program
        uline (38).
        write: 157''.
        loop at i_fmodule.
          write: sy-vline,
                 i_fmodule-name,
                 sy-vline,
                 i_fmodule-bapi,
                 sy-vline.
          write: 157''.
        endloop.
        uline (38).
      endif.
      describe table i_submit lines w_linnum.
      write: / c_subm , at 35 w_linnum.                         "#EC NOTEXT
      write: 157''.
      if p_subm = 'X'.
    display submit programs used in program
        uline (44).
        write: 157''.
        loop at i_submit.
          write: sy-vline,
                 i_submit-pname,
                 sy-vline.
          write: 157''.
        endloop.
        uline (44).
      endif.
    issue message with number of user-exits displayed
      describe table i_userexit lines w_linnum.
      message s697(56) with w_linnum.
    endform.                        "DATA_DISPLAY
    reward points if it helps
    gunjan

  • I have no idea how to find my serial number to launch Lightroom. I have the student teacher edition and I'm using a mac

    I have no idea how to find my serial number to launch Lightroom. I have the student teacher edition and I'm using a mac.

    How did you purchase Lightroom? Download? Package?
    Have you followed the instructions to verify that you qualify for academic discount?

  • How To Find Opening Stock And Value For a Material

    Hi Experts,
    How To Find Opening Stock And Value For a Material  in Given Dates
    Moderator Message: Search.
    Edited by: kishan P on Sep 15, 2010 4:05 PM

    Thanks For Answering.....
    But I Need Any Function Module To Get Opening Stock And Value For Given Material With in Dates.

  • How to find the Date and Time of Modification of Column in aTable?

    Hi all,
    Do  you know how to find the Date and Time of Addition of Column to a Particular Table?.
    I know however, How to find the modification time of the Table. Using the below Query :
    Select Object_Name, to_Char(Last_DDL_TIME, 'DD-Mon-YYYY HH24:MI:SS') Last_DDL from User_Objects where Object_Type = 'TABLE';
    Object_Name
    Last_DDL
    Employee
    20-Aug-2013 09:23:03
    I wanted to know the Creation or Modification Date and Timestamp of all columns of Employee Table?. Is it possible at all. If possible, How to get it?.
    Regards,
    Bhaskar M

    I agree with you on that. Since its a development enviornment I can remove the column but that not my point here.
    My whole purpose it to know whether we get the Column's Creation or Modification DateTime.

  • How to find the job and job status from RSPCM

    hi all,
    suppose we got an error and in rspcm the process was failed.i want to know the status of that particular job.and if any i want to stop that job in SM37.
    plz tell me how to find the job and job ststus from RSPCM...and how to stop that job in SM37
    thanks,
    jack

    Hi Jack,
    RSPCM: T.Code
    This transaction is used to monitor the process chains
    First:
    here you need to add the process chains into the sheet
    Second:
    Then you can monitor the process chains in this transaction code
    Like you can see the :  status ,proces chain ,Last run date ,Last run time ,Log ID
    Status : Green when sucessful,Yellow when running & Red when you get errors
    Now when yoy click on any of the process chain in RSPCM you will go to the LOG VIEW as you see in RSPC transaction
    SM37:T.code
    This transaction is used for Job Overview
    you can see many options in SM37
    like Released,active,cancelled,finished,etc
    Just select the ACTIVE  jobs and also pass STAR in JOB ID & USER ID
    here you can only see the active jobs
    Goto Step in toolbar
    select the program displayed
    then chose option GOTO - Variant in main menu bar
    in the variant you can see the job belong to which Process chain
    if you want to cancel this job come back to SM37 Display screen
    Select the Job and select the JOB DETAILS tab in Tool Bar
    Collect the WIP ( Work Permit ID)
    Go to SM50 T.code and find the WIP
    in Main Menu Bar you find the option Cancel with Core choose this it will cancel the Job
    Regards
    Hari

  • How to find the Project and wbs Element System Status

    Hi all,
      How to find the Project and wbs Element System Status.
      We can find the system status in the CJ20n transaction but I want the table and field name where it is stored.
    Regards
    Raghavendra

    Hi,
    try table <b>jest</b> with key = prps-objnr
    Andreas

  • How to find the header and item level status of a CRM contract ?

    Hi,
    Few questions
    A. How to find the header and item level status of a CRM contract ? My req is to select all the contract line items which are in CLOSED status.
    B. How to get the BPs associated with a contract ?
    Anyone have the list of CRM tables and the relation amongst them. Please mail me in [email protected]

    CRMD_ORDERADM_H     Contains the Header Information for a Business Transaction.
    Note:
    1.     It doesn’t store the Business Partner
           responsible for the transaction. To 
           get the Partner No, link it with
           CRM_ORDER_INDEX.
    2.     This table can be used for search
           based on the Object Id(Business
           Transaction No). 
    CRMD_CUSTOMER_H     Additional Site Details at the Header Level of a Business Transaction
    CRMD_LINK     Transaction GUID set for all the Business Transactions
    CRMD_ORDER_INDEX     Contains Header as well as Item details for a Business Transaction.
    Note:
    1.     It doesn’t store the Business 
          Transaction No (Object ID).
          To get the Business Transaction No  
          link the table with
          CRMD_ORDERADM_H
    2.   This table can be used for search
          based on the Partner No
    CRMD_ORDERADM_I     Stores the Item information for a Business Transaction. The scenarios where we have a Contract Header and within contract we have Line Items for the contract, this table can be useful.
    E.g. Service Contracts
    CRMD_CUSTOMER_I     Additional Site Details at the Item Level of a Service Contract
    Pl.reward points.......

  • How to find the font and replace another font using javascript in illustrator?

    Dear All,
    how to find the font and replace another font using javascript [batch process] in illustrator?
    i have 700 image file, it very deficult replace one by one.
    regards,
    .Suresh.S

    Ask the creator of the file for a unprotected version.

  • How to find the columns and tables used in a stored procedure?

    Hi,
    Can someone suggest how to find the columns and tables used within a stored procedure?
    Thanks
    VBK

    For example:
    SQL> create or replace
      2    procedure p1
      3      is
      4          cnt number;
      5      begin
      6          select count(*) into cnt from emp;
      7  end;
      8  /
    Procedure created.
    SQL> select  referenced_owner,
      2          referenced_name
      3    from  dba_dependencies
      4    where owner = 'SCOTT'
      5      and name = 'P1'
      6      and referenced_type = 'TABLE'
      7  /
    REFERENCED_OWNER               REFERENCED_NAME
    SCOTT                          EMP
    SQL> SY.

  • How to find ThinkPad serial number if label is worn?

    QuestionI'm having some trouble with my T500 ThinkPad and want to contact service, but am not sure how I can find out the machine type and serial number to provide to support when I call because the sticker on the bottom of the laptop is faded so I don't know what the S/N is. I do have one number though: [serial removed] was what I copied down from it before it became faded. I dont know what to do now, so if you have any ideas, that'd be great.
    Answer 
    Generally the label with type and serial information is found on the bottom of laptops and tablets and on the rear of desktop systems and on the back or along the edge of displays.   As noted by the question asked above, in some cases, the label may become worn.  To reduce / avoid this, the type / serial label was relocated to the battery compartment on some systems with removable batteries, along with the Win 7 COA.  As Win 8 does not have a COA lable, and print technologies for labels have improved, most current systems have the label on the bottom.
    Some tablets may have the type and serial information label on the inside of memory door / SD card slot covers as was the case with the ThinkPad tablet type 1838/1839.
    Here is a link to an article on the support site with examples of label locations for different model Lenovo systems.   If the system will not power up at all, finding the physical label is the best course of action when contacting service.
    If the label is missing and the system will power up, there are several ways to easily find this information as it is written into the BIOS on the system board.
    1) Command Prompt
    Run an elevated command prompt, Enter the command "wmic bios get serialnumber" (without the quotations).
    2) BIOS
    Boot to BIOS (press F1 on startup) and the model type and serial number will be listed.
    3) Diagnostics - Lenovo Solution Center (LSC) or the prior Lenovo ThinkVantage toolbox.

    wmic bios get serialnumber  does not work !!!!all your pages about how to find a serial number are disfunctuional !!! What a bed service

  • How to find my serial number in downloaded logic pro X

    how to find my serial number in downloaded logic pro X

    There is no serial number for Logic Pro X

Maybe you are looking for