IPhoto'06 burning CDs - Can they be read on earlier versions of iPhoto?

I have recently installed iLife'06
I burn photos on to CD but people with earlier versions of iPhoto don't seem to be able to open them and see the photos ?
Do I have to burn them in an earlier format or do they have the problem ?
Thank you
Tim ML

Hi. I have been frustrated by the same problem, found this thread, and tried PhillyPhan's advice. Then, when my wife put the CD in her G4 Powerbook (iPhoto 5.0.4) it said that there were "no photos" on the CD. I popped it back into mine and it read them just fine. Any other ideas?
The really frustrating part of this is that I can give friends who use a variety of PCs (makes and ages) my iPhoto CDs and they open them without problem. I give them to my Mac-owning wife and she can't open them on her G4!
Macbook Pro1   Mac OS X (10.4.7)   1.83 GHz Intel Core Duo

Similar Messages

  • If i have multiple devices with my icould account can they all read my text messages?

    If i have multiple devices with my icould account can they all read my text messages?

    Welcome to the Apple Community.
    They can all share your iMessages, just make sure the settings on each device are set to send and receive from the same numbers and addresses.

  • How can I re-install the last version of iPhoto, I hate this new version.

    How can I re-install the last version of iPhoto. I hate this new version "Photos 1.0" which installed yesterday on my iMac. Please help. My operating system is OS X YOSEMITE 10.10.3. THANKS.

    Go to the App Store and check out the Purchases List. If iPhoto is there then it will be v9.6.1
    If it is there, then drag your existing iPhoto app (not the library, just the app) to the trash
    Install the App from the App Store.
    Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
    http://support.apple.com/kb/HT4928
    One question often asked: Will I lose my Photos if I reinstall?
    iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

  • How can I print multiple photos per page?  It was simple in earlier versions of iPhoto.

    How can I print multiple photos per page?  It was simple in earlier versions of iPhoto.

    Do you want to print several different photos per page or multiples of the same photo?
    If you want to print several different photos,select them all at once and press command-P for "Print".  Pick the Custom Layout and adjust the photo size suitably.
    If you want multiples of the same photo, duplicate the photo several times and select all copies at once, then press command-P.

  • Can I use my wife's iPhoto update from her iMac to update my older version of iPhoto?

    I have a mid 2010 iMac with iPhoto 09 (version 8.1.2). My wife has a newer iMac with iPhoto 11.  Can I use her updates to update my iPhoto to the latest iPhoto 11 version if I sign in with her Apple ID and password on my computer?   Or do I have to upgrade my own and pay for that separately?
    Thanks,
    Mark

    Why not just give it a try?  Based on the limited information you gave I believe you can
    LN

  • Verything wants to downloaEd as an index.php can I go back to earlier version?

    Every time I try to download a file It wants to download as an index.php file, this started after FireFox automatically upgraded to 8. Also freezing up and switching to earlier page. CAN I GO BACK TO EARLIER VERSION???

    Previous versions of iTunes won't use the  iTunes library (newer version) file
    Fortunately, iTunes makes backup copies of its library,
    So when you reinstall, you have to delete (or rename just in case) library file, you have to copy (and rename) one the backups (usually the most recent one) to take its place
    the library file is called         >>         iTunes Library (extension itl)
    and should be in  the          >>          Desktop\Libraries\Music\iTunes\           folder
    the backups should be in the    >>     Desktop\Libraries\Music\iTunes\Previous iTunes Library\        folder
    that should make iTunes work, wiith most or all of your library intact

  • Can't burn CDs - can't find driver updates

    Aaargh! It's happened again!!!
    When I put a CD in, the CD is recognized as blank but when I try to burn the playlist, Itunes hesitates for about 30 seconds and then ejects the CD with no error message.
    This happened about three months ago and I spent two days looking for driver updates and mindlessly uninstalling applications and it began working again. I am certain I am having some conflict with other software because my burner works fine with SonicStage with the same CDs. Does anyone know how to identify the offending software? I have scanned several posts with similar issues, but do not see anything in the past few days which applies.
    My diagnostics are:
    Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    Gateway E-4100
    iTunes 7.1.1.5
    CD Driver 2.0.6.1
    CD Driver DLL 2.0.6.2
    LowerFilters: PxHelp20 (2.0.0.0),
    UpperFilters: GEARAspiWDM (2.0.6.1),
    Current user is an administrator.
    Video Display Information:
    Video Controller (VGA Compatible)
    NVIDIA GeForce 6800
    NVIDIA GeForce4 Ti 4200 (Microsoft Corporation)
    Connected Device Information:
    DiskDrive, ST3160812A, Bus Type ATA, Bus Address [0,0]
    CDROM, HL-DT-ST DVDRAM GMA-4020B, Bus Type ATA, Bus Address [1,0]
    CDROM, JLMS XJ-HD166S, Bus Type ATA, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    D: JLMS XJ-HD166S, Rev DGS3
    Audio CD in drive.
    Found 14 songs on CD, playing time 47:42 on CDROM media.
    Track 1, start time 00:02:00
    Track 2, start time 03:00:65
    Track 3, start time 06:23:00
    Track 4, start time 10:34:72
    Track 5, start time 12:18:40
    Track 6, start time 15:35:57
    Track 7, start time 18:35:42
    Track 8, start time 21:04:62
    Track 9, start time 24:09:32
    Track 10, start time 27:54:65
    Track 11, start time 31:57:02
    Track 12, start time 34:21:27
    Track 13, start time 37:23:25
    Track 14, start time 44:53:65
    Audio CD reading succeeded.
    Get drive speed succeeded.
    E: HL-DT-ST DVDRAM GMA-4020B, Rev A105
    Media in drive is blank.
    Get drive speed succeeded.
    The drive CDR speeds are: 4 8 12.
    The drive CDRW speeds are: 4 8.
    The drive DVDR speeds are: 4.
    The drive DVDRW speeds are: 4.

    There was a post May 1 with lots of good information however it was not helpful for me. I tried what was suggested and still can not burn CD. Apple support was not able to help either. I get to install blank CD>>> incert the CD and nothing happens. No error message. I don't even know what to look for or where to begin. This just started happinging when I updated with the lastest version of iTunes.
    Got any helpful suggestions... please post details

  • Error 4251-can't burn cds, can you help?

    Here are my diagnostics-please help this is very frustrating!!
    Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    Dell Computer Corporation Dimension 4600i
    iTunes 7.4.3.1
    CD Driver 2.0.6.1
    CD Driver DLL 2.0.6.2
    LowerFilters: PxHelp20 (2.0.0.0), drvmcdb (1.0.0.1), sscdbhk5 (1.0.0.1), MxlW2k (1.1.0.116),
    UpperFilters: GEARAspiWDM (2.0.6.1),
    Current user is an administrator.
    Video Display Information:
    Intel(R) 82865G Graphics Controller
    Connected Device Information:
    Disk drive, ST340014A, Bus Type ATA, Bus Address [0,0]
    CD-ROM Drive, SAMSUNG CD-R/RW SW-252S, Bus Type ATA, Bus Address [1,0]
    CD-ROM Drive, SAMSUNG DVD-ROM SD-616E, Bus Type ATA, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    D: SAMSUNG DVD-ROM SD-616E, Rev F501
    Drive is empty.
    E: SAMSUNG CD-R/RW SW-252S, Rev R902
    Audio CD in drive.
    Found 16 songs on CD, playing time 58:40 on Audio CD.
    Track 1, start time 00:02:00
    Track 2, start time 03:52:37
    Track 3, start time 07:37:30
    Track 4, start time 11:32:55
    Track 5, start time 14:42:35
    Track 6, start time 19:20:63
    Track 7, start time 22:56:61
    Track 8, start time 26:52:62
    Track 9, start time 30:09:06
    Track 10, start time 35:04:12
    Track 11, start time 38:19:18
    Track 12, start time 41:30:43
    Track 13, start time 44:37:41
    Track 14, start time 47:43:71
    Track 15, start time 50:56:07
    Track 16, start time 54:30:24
    Audio CD reading succeeded (check for old firmware).
    Get drive speed succeeded.
    The drive CDR speeds are: 4 8 16 24 32 40 48.
    The drive CDRW speeds are: 4.
    Force Optical Power Calibration before burn is turned on in the preferences.
    The last failed audio CD burn had error code 4251(0x0000109b). It happened on drive E: SAMSUNG CD-R/RW SW-252S on CDR media at speed 4X.

    I am getting sam error. If you get an answer please let me know. I can burn from musicmatch but not itunes!

  • Unable to burn CDs -- can't burn at this speed

    My superdrive suddenly no longer will burn CDs. I get an error message that "the drive cannot burn at this speed" and this is no matter what speed I try! Even 2X get's this message.
    I upgraded to iTunes 5.0. Can this be the problem? I am using 10.2.x and hate to invest in whatever the latest OS is if that isn't the solution. Any one have any ideas?

    Hi
    I have a similar problem.
    I get this error message :
    "Itunes can't burn teh CD because the burn speed is too fast for your CD burner or media
    Choose a lower speed in the burning pane of itunes preferences then try burning again"
    The problem is that I have just burnt a few CD's and then gone back to burn another...In the interim the only thing that has happened is that the laptop has gone to sleep.
    It is the inconsistency that bugs me plus the fact that surely that one could design it so you got the warning before wasting CD's or it automatically adjusted to the drives speed
    I am running itunes 5.0.1 on OSX 10.3.9 on a G3 ibook 600mhz 14.1

  • I have a mac book air, and i bought a LG portable cd drive, which is suppose to burn cds. but they software cd that was included with the lg cd/dvd writer doesnt load. and i want to burn a cd from itunes but it says " burning software is not found"??

    so i bought a mac book air, and i had to buy the LG portable cd drive... which is supposed to burn cds? the lg cd/dvd writer came with a cd but it wont load onto my computer when i plug the usb cord in. all i want to do is burn a cd from itunes but it says " burning software not found" but the LG cd drive says it will burn cds?? im confused please help!

    You dont need ANY CD/DVD burning software on your Mac
    Just plug in your LG DVD/CD player and follow the below instructions
    http://support.apple.com/kb/HT1152

  • How can I get an earlier version of iphoto?

    I accidentally deleted iphoto from my mac, and need to reinstall an earlier version then the one currently offered at the App Store that requires me to upgrade to Maverick. Any suggestions? I have a macbook Pro, that I purchased after 2011 and so the software was automatically loaded on my computer when I got it. I do not have the original CDs.

    the choices are to
    reinstall from the original source
    Could be
    1 - the restore disks that came with the computer - if it came with CDs and you do not know where they are then contact Apple to see if they can be replaced
    or
    2 - the iLife DVD that you purchased
    or
    3 - the app store - log in under the Apple id used to purchase the software or to set up the computer - look under purchases - you might have to unhide or accept the Application first
    Or
    Purchase an iLife DVD for the version you need - eBay and Amazon are potential sources (going to #2 for the future)
    LN

  • How can I access and download earlier versions of Adobe Reader to put on my older model iPod Touch?

    We have model PC086LL iPod Touched from roughly 2008 for our school that are rarely used anymore because we've updated to iPads.  But, I want to be able to use some of the iPod Touches to store files to access remotely in emergencies.  Unfortunately I cannot access earlier versions of the Adobe Reader app that are compatible with this version iPod.  How do I get access to those earlier versions?

    SGMS Knight,
    Based on the model number that you provided, your device is an iPod Touch 2nd generation.
    According to the following Wikipedia page, the highest supported operating system for the iPod Touch 2nd generation is iOS 4.2.1.
    http://en.wikipedia.org/wiki/List_of_iOS_devices#iPod_Touch
    Adobe Reader for iOS version 11.0.1 is compatible with iOS 5.  However, the App Store does not have the earlier version of Adobe Reader that is compatible with iOS 4.
    As a user, you can download and install Adobe Reader for iOS only from the App Store.
    You may be able to find other free PDF viewers that are compatible with iOS 4 in the App Store.
    Good luck.

  • I have a Mac OSX Version 10.4 and iphoto 6. I cannot upgrade to a later version of iphoto 6 because it requires a 10.5.6 or later. What can I do?

    I have a Mac OSX version 10.4.11 and iphoto 6. I can no longer order cards, prints etc. and cannot upgrade to a newer version of iphoto because I don't meet the system requirements of 10.5.6 or later. What can I do?

    Unless you upgrade the OS and then iPhoto, not a lot, I'm afraid.
    Regards
    TD

  • Error mssg: can't open library with this version of iphoto

    Help please... I have iphoto 09 but I can't open anything. For some reason, I have multiple copies of the library on my desktop. The message says I made changes and can't open with this version. One of the library folders says Library6.iphoto, which makes no sense.
    Here is what I have done recently to maybe cause this?
    - I did drag one library out of the trash yesterday (due to paranoia from a previous case of deleting ALL my photos).
    -I also deleted photos from my photobooth from within Finder in the "today" section.
    I hope this make sense, I am pretty much a newbie still.
    Anyway, I can't open any photos. I don't know why, or what's with all the multiples.
    Any advice would be much appreciated.
    Thanks!

    painterchic
    I still have an icon on my desktop that says Library6.itphoto and when I click on it, it opens my iphoto proogram,
    This is an element that should be inside an iPhoto Library. I wonder if it belongs inside this one:
    When I use the alt/option key and choose library, there is a third library that will not open, with the message saying "cannot open, changes have been made, and to use a newer version".
    If not, you can find the location of this Library easily: When you use the alt key to choose Libraries the location of the Library is given to you:
    Uploaded with plasq's Skitch!
    You could try rebuild that Library by downloading iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
    Regards
    TD

  • Can i use old and new version of iPhoto on one computer with 2 users

    my partner wants to use the new version with his library and i want to stick with the old iPhoto 6 for now. i haven't opened iPhoto 8 on my side yet and when i look for the old version of iPhoto 6 i don't see it... i thought it was supposed to remain available even with the upgrade.
    is iPhoto 6 still available once iPhoto '08 is installed?
    i assume someone knows the answer or has seen something somewhere that addresses this question.
    thanks, robin

    The danger is that iPhoto won't automatically know which library to open, and if you open the v6 library with the v7 app you will probably make that library unreadable by v6.
    You're best bet is to hold the Option key each time you launch iPhoto and choose the correct library. This suggestion comes from Old Toad in this thread: http://discussions.apple.com/thread.jspa?messageID=5102027

Maybe you are looking for

  • How to use SAP RDE CRM Users products

    Dear Experts Am facing a issue when use SAP RDE CRM Users product as belows: At this time, my customer running with ERP ERP 6.0 EHP4 in three landscapce (server DEV, server TEST and server PROD) And now, my customer want to use SAP RDE CRM Users prod

  • Blank spaces(hex 00) inserted when extracting data

    I'm trying to extract data from a file with select-string and a regular expression. The data are SWIFT messages and I'm reading all files in a directory and then extracting the part I want with a regular expression which works fine, with the exceptio

  • 2 x 3 GHz Unknown in About This Mac?????

    Anyone know what this means? Apple themselves can't explain it. I have a new 8-core, and in the About This Mac section, it says "2 x 3 GHZ Unknown.

  • Connecting WRE54G to WRT54G

    I seem to get through the setup OK and have a strong signal indicated in Wireless Networks but the signal strength indicated on the Wireless Connection is still the same poor signal I started with.  It suggests to me that the PC is not connecting to

  • My id password is coming up as my second phones id and I can see how to change the two .ones id

    I have two differnt iphones and when I try to update my apps I get a request for the other phones apple id. How can I change to the other phones ID?