IPhoto 08 and the missing Shutterfly button for exporting
Does any know what happened to the shutterfly button that was in iPhoto 06 for exporting, it seems to be gone in the 08 version???
Help my wife is giving me grief about upgrading to Leopard and iPhoto 08!!
If shutterfly has an export plugin for iPhoto '08 it typically would need to be installed from Shutterfly (it is not an Apple product) and then would appear as a tab in the file menu ==> export pager
Check out the Shutterfly page for iPhoto '08 (version 7.x.x) assistance
LN
Similar Messages
-
My phone suddenly stopped working...one day i couldnt use my phone to make calls because the speaker and mic stopped working then i noticed the touchscreen speaker button that apears first when you make a call was gone. Only way I can use my phone is with the hands free kit. I brought it in to AT&T and a wireless reapir shop to replace the speaker and mic and that didnt help any. HELP!
Post relates to: Treo 680 (AT&T)The microswitch in the headset jack may be stuck.
Click on the following link for the forum post regarding this issue. Thanks to Super Contributer, DTfromBH.
http://forums.palm.com/palm/board/message?board.id=hardware&message.id=31143&query.id=113582#M31143
For reference purposes, click on the following link for the support page for your device on the kb.palm.com webpage.
http://www.palm.com/us/support/treo/treo680att/
There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.
Post relates to: Palm i705 -
I have a sixth generation ipod 16gb nano. It will not turn on. I have tried hoding down the power button with the down volumn button without results.
Any other suggestions?i have the same problem...my ipod is 4th generation?uggghhhhh
-
My home screen is gigantic… So much so that 1/200 of the normal screen display now fills up the entire screen. As a result, I cannot even see my keypad to enter in my passcode. I've tried a hard reset a few times (holding the home button and the on off button at the same time until the iPhone restarts). This has not resulted in any changes. Any ideas?
Thank you Lawrence. that worked! I have another question for you as well. I just got this 6 Plus and it is already saying that I am nearing the end of my storage. My iCloud is apparently 20gb and I have 6gb left. I'm attaching a screen shot. Any thoughts on how I can make available some more storage?
I Also wanted to get an enhanced quality Speech voice Alex, but it is saying I don't have enough Memory (I think it says memory because I can't read the message fully). Lastly, in your opinion does Grayscale really improve battery life above and beyond what can be achieved by closing out all apps etc. Thank you. -
My macbook will not boot. It goes to a blue screen after the logo and wheel goes off. I have taken the battery out and held the on/off button for five seconds and reset the PRAM. I have the the original os disk but have not put it in for fear of losing un backed op data.
Thanks
RichYou won't lose any data unless you erase your hard drive.
Put your install DVD into the optical drive and reboot. As soon as you hear the boot chime, hold down the "c"key on your keyboard (or the Option key until the Install Disk shows up). That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it.When it comes up is your Hard Drive in the list on the left?
If it is then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've selected the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions. -
most times when I import photos from my desktop or dropbox to iPhoto, iPhoto will keep the title I created for the image as the display title under the image. but occasionally it displays the filename instead and I have to go back through and reenter the title in iPhoto. why the inconsistency? running OS 10.9.5 and using iPhoto 9.5.1
Try this: select one of the photos that are showing the wrong title and use the Photos ➙ Batch Change ➙ Title to File Name menu option.
See if that will put the name that you want under the thumbnail. -
Where are the agree/disagree buttons for terms and agreement?
Where are the agree/disagree buttons for iTunes card redemption?
They should be right there on the page, but if you don't see them, reset the phone and try again (hold down the home and power buttons until the screen goes black and the Apple logo appears, then let go).
-
My iPad Air stalled during an update and will not restart even after pressing the on/off button for 15 seconds. Any suggestions?
Have you tried a soft-reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should appear and it should reboot.
-
How do I include an entire hour-long performance on a DVD and also have menu buttons for playing isolated sections of the performance?
So far, I've already done the individual menu buttons for sections of the performance. How do I set up some kind of "play" button that will play the video of the entire performance straight through? Will this be too much material for the DVD to hold? Does the program recognize and not replicate material to save space? If so, will it interfere with that if I add edits to individual sections that will not be in the video of the entire performance?Hi
If You only need
• Play movie in full
• Start into the movie at specific places e.g. Chapters - then play to movie ends
Then this is fairly simple - Just add Chapters in Your Video-editor (iMovie or FinalCut)
(some quirks to keep in mind - No Chapter mark in any transition or within 2 sec from it - AND - only Lettera A to Z and 0 to 9 - no other letters/symbols at all)
BUT
If You want to
• Play full movie (with or without Chapters)
• Play an individual Chapter then return to Menu
This function is not standard in iDVD - but has to be faked one way or another.
Please read my notes on this and be aware of the 60 minutes / 12 minutes limit in iDVD (THIS is including the Menu and it can take 15 minutes or more from the movie time)
Play all resp one chapter at a time
Play All Button
1. There are NO - Play All - button in any version of iDVD
2. It can be faked in several ways
• Easiest and most fault proof way is to make a doublet movie containing All and with
Chapters set to match. It will take up x2 space but is easy to understand and produce.
Cons: Tried this in iMovie’11 by Exporting out each part as a full Quality QT.mov then Importing back into new events and putting these into a new project (Play All project). Resulting DVD had Audio that was OK (as parts) - BUT the picture was very bad and standing photo were cut of in hight. So the Play All movie has to be created from same material and exactly in the same way as the individual parts + then Chapters has to be set to match.
• It's said that one can put all movies into a Photo/SlideShow and this will also
give the function of a Play All button - Tested - and ONE HAS TO un-cheque - Scale pictures to TV-Safe area else it will be a black frame all around and a small picture !
Cons: BUT - When tested with music videos - the same video on main Menu played nicely with OK Audio. The Play All version in SlideShow had a signifcant Distortion - as on telephone or worse.
Mike Evangelist1
You might be able to get close to what you want by using a slideshow in iDVD. (It's not widely known, but you can put videos in a slideshow.) If you set the slide duration to manual, playback will pause after each movie/slide, and you can continue with the 'next' button.
3. Using another program to do this e.g.. Roxio Toast™ where there is a Play All button option.
Summary
a. Making a Play All movie with same care as the individual Part movies - gives a very Good Result
b. Using Roxio Toast™ - also an usable way to go
Yours Bengt W -
my ipod shuffle 4th gen bought today and the voice over works for naming playlist and battery percent but wont name song and artist can anyone help also is the voice over button meant to be soft when pushed ?
thanksThis document explains setting up and using VoiceOver.
http://support.apple.com/kb/ht4322
The overall settings for VoiceOver is on the shuffle's Summary screen in iTunes.
Artist name and song name - Press and release the VoiceOver button.
The playlist menu - Press and hold the VoiceOver button. -
I have an iPod Nano 6th Generation for just over three months and the down volume button is sticking. Does anyone have a recommendation for resolving?
Dont buy this model again, this is the most common problem and i have gone through 4 of these 6th gen nanos all with the same problem. You can find youtube videos that show you how to fix it yourself but you run the risk of breaking your ipod, also opening the ipod voids any warrently.
-
In "purchases" while in my App Store, Mountain Lion says, "an error has occurred" and the green 'download' button is grey and I cannot re-start the download. I was abroad when I purchased this app and during download, my internet connection was lost. At the time, Apple was still offering the e-chat, so I did that and the man was very helpful and it was a quick fix, so my download button turned green again, and I was able to begin the download. BUT during the download, I was kicked offline once again, and I decided to wait until I was back in the USA. I will go in to an Apple store and ask assistance, but if there is something I am missing, I'd like to try that first. Thanks in advance for any advice.
Welcome to the support forums.
Please ask this question in the Mac App Store forum where they can better assist you. -
Trying to load a downloaded version of illustrator 6cs onto new mac and the old activation code for my illustrator cs doesn't work with it. Do I need a new code or am I missing something? Same goes for my Photoshop cs.
you need your serial number.
if you purchased from or registered with adobe check your account, https://www.adobe.com/account.html -
My ipod touch is not recognized on itunes and will not turn on or even give me the battery sign that it is dead. I turned it off and it won't turn back on now. The screen is completely black and won't do anything. I have tried charging it over night and nothing happened. It was never near water. I have tried troubleshooting it by holding down the home button and the sleep/wake button, but nothing happened and it didn't work. What can I do to fix it?
Device Not Recognised
For PC
http://support.apple.com/kb/TS1538
For Mac
http://support.apple.com/kb/ts1591 -
when I connect my iPhone, iPhoto opens and the phone begins charging but iTunes does not recognize it and I cannot sync. Any advice?
Howdy AndieKanaras,
It sounds like your iPhone is being recognized everywhere but in iTunes. I would use the troubleshooting for that issue in the following article, named:
If you don't see your connected device in iTunes for Mac
Thank you for using Apple Support Communities.
All the very best,
Sterling
Maybe you are looking for
-
Very strange text on screen - Server 10.2.8
One place I work has a Mac network based around a G4 1.25 Ghz server running 10.2.8 Server and some Mk II iMacs running normal 10.2.8. Yesterday when I came in the server was showing a black screen with the following text scrolling down the screen in
-
If the customers treated Verizon like Verizon treats its customers
Im having a hard time finding words that wont get my post deleted. The past few times ive had any dealings with Verizon should be the traing for how not to provide customer service. On the phone or in the store it doesnt matter its been a bad joke. I
-
Windows 8.1 desktop refresh required after closing mstsc
In Windows 8.1 Pro with Update (64-bit), in desktop mode, after closing the mstsc app (click X in title bar) during an mstsc session to a Window 7 Ent SP1 workstation, the contents of the mstsc window remain displayed and a desktop refresh (right-cli
-
Does Verizon offer any incentives if you bring them a new customer?
I think I have convinced my sister to switch from AT&T to Verizon. Will Verizon offer me any incentives, e.g., a greater discount on my upgrade for referring her to them as a new customer? I am due for an upgrade on October 24, 2011 and I would like
-
I have been trying to update my firmwareto 4.2 but cant for some reason. I am able to download the majority of the file then just before the end it stops and an error message is diaplayed - 3259. It says the connection has timed out but i still have