IPhoto 08 not behaving the same in G5 and MacIntel

Hi, I installed iPhoto 08 recently on my G5 1.6 Ghz and a new MacBook (macintel).
I noticed 2 big differences between the macs regarding how iPhoto behaves:
- opening (magnification of) pictures is slow and choppy on the G5
- on the G5 too, the events don't show the small text box "Display pictures" when mouse is over an event. That implies that we can only double click the event, which opens the event the same we'd do for any album. It seems not possible to double-click and open a single picture displayed in an event frame before we open the event itself.
I don't get where those differences come from. Is that due to the Graphic card, or also something else? Thanks for helping.

Lukum
opening (magnification of) pictures is slow and choppy on the G5
This could well be due to the graphics card or video RAM that's available.
I'm afraid I don't quite understand your other issue:
Have you compared the Preference setting between the two machines? For instance, if at iPhoto -> Preferences -> Events, I select 'Double Click Event: Shows Photos' then I don't get the 'Display Pictures Box, but if I select 'Magnifies Photos' I do.
Regards
TD

Similar Messages

Firefox mouse event not behaving the same on PC and Mac computers

I use the FCKEditor and having a very strange problem. When I click on the FCKEditor's editing area, the keyboard gets disabled untill I click the mouse somewhere outside of the editing window. The problem only happen on Firefox (3.6.10) on Mac computer (Snowleopard 10.6.4). Doing exactly the same steps on PC works without any problem.
What I want to know:
- Is it possible that the Firefox on Mac is different than the PC in handling mouse events? Or some other areas?

Sounds more that Firefox is treating that editor area as read-only.
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

HT204053 Do you not use the same Apple ID and password as you would use for ITunes, IPhone and email?

Having already established 2 apple ID's. I want to change the ID listed on my iphone. Placing the new, ID on my phone it will not accept it.
Do you not use the same Apple ID and password as you would use for your IPHONE, EMAIL and ITUNES?

Where/how are you trying to replace it and what happens ? You should be able to log out of the currently logged in account for the stores by tapping on it in Settings > iTunes & App Store and you should then be able to log in with a different account, and for icloud email via Settings > Mail, Contacts, Calendars to delete and then add an account.

TS1702 I do not have the same email account, and i want to download in a new computer this software, how can i do to solve my problem?

while ago i purchase Documents to go. I want to use this software in my new computer. I do not have the same email account, and i want to download this software, what can i do to solve my problem?

As long as the Apple ID was not an Apple domain, such as @mac.com or @me.com, you can update the ID to a new email account.
http://support.apple.com/kb/HE40

Program not behaving the same after making it a JAR

Hello,
I'm developing a program using Eclipse and wanted to export a JAR file to test out. I was able to successfully make the JAR file and it does run, but not as expected. For example, I have the following code which opens up a JFileChooser and lets the user select multiple files to be stored in a JList (via a list model). When I run this from the IDE during development, it works as it should, allowing me to select multiple files from the JFileChooser and adds all of the files to the JList. However, when I run the JAR, it lets the user select multiple files but only adds ONE file to the list. Not only that, but it doesn't seem to be running my "loadComparePaper()" method after adding the item to the list model.
JFileChooser fileChooser = new JFileChooser(); // New JFileChooser
fileChooser.setMultiSelectionEnabled( true );     // Allow multiple files to be selected
FileFilter docFilter = new ExtensionFileFilter( null, acceptableFiles ); // "acceptableFiles" is an array of allowable extensions (not shown in this snippet)
fileChooser.addChoosableFileFilter( docFilter ); // Tell the JFileChooser to use my filter
int returnValue = fileChooser.showOpenDialog( null ); // Open the dialog; store result
if ( returnValue == JFileChooser.APPROVE_OPTION ) {
    File[] selectedFiles = fileChooser.getSelectedFiles(); // Get selected files; store in array
    for ( int i = 0; i < selectedFiles.length; i++ ) { // For each selected file..
     compareListModel.addElement( selectedFiles[ i ].getName() ); // Add file name to list -- getting stuck here!
     loadComparePaper( selectedFiles[ i ] ); // Call method to load this file (read it)
}It seems like it's not running the whole for loop, because only one item is being added to the list and it never reaches "loadComparePaper()". Again, it works during development in the IDE and I've tried exporting the JAR quite a few times to see if that was the problem, but the JAR itself is executing.
Any ideas? I'm baffled as to why it works while I'm testing it out in the IDE, but after I export the JAR it's not working properly. Do you think this has something to do with Eclipse? Has anyone else experienced a problem like this?
Thanks

ThomYork:
Thank you for the advice. I'm new to using JARs and foolishly forgot or didn't realize that I should run it from the console to check for errors. Well, it seems this is the problem: I'm using Apache's POI package and have it stored in the directory +/my_project/lib/poi/+. Within the +/poi/+ folder are 3 JAR files that my program references. When I run my app from within the IDE, I don't get any errors because I've included them in the build path. However, when I run my JAR, it can't find the classes -- it doesn't seem to be looking in the +/lib/poi/+ folder even though my JAR file is in the same root directory as the main class when I run it within the IDE (i.e., both my_main_class and my_main_jar are in the same level directory, and would need to look in the +/lib/poi/+ folder for the other packages).
So I guess my problem is... my JAR file doesn't "see" the path of the other packages I'm using. In Eclipse, I've configured my project to include these other packages in the build path (and also the "Order and Export" build path) so I thought it would include them, but that doesn't seem to be working.
Am I missing something? How do I include JARs in other packages / folders so that they work in my JAR?
Thanks again
EDIT: I see some other people on this forum experiencing similar issues and I noticed you've helped them out. I tried creating a manifest file, but that didn't work, either... just to be more specific, this is the error message I'm getting:
Exception in thread "AWT-EventQueue-0" java.lang.NoClassDefFoundError: org/apache/poi/poifs/filesystem/POIFSFileSystem
        at OneToOne.loadSourcePaper(OneToOne.java:907)Edited by: ibanezplayer85 on Aug 14, 2008 10:19 PM

A page does not behave the same in every case

Hi,
I am using adfbc and jsf/adf pages.
I have an entity called Parish (CountryId, CityId, AreaId, ParishName), and created a simple validation method (if the parish name is equal to "test" then to show an error by returning false).
I created a custom validation method in my AppModule that i just simply get the record id, find the entity and set the values with the method parameters
I then created a view based on the entity and dragged my view object on my jsf page. I created a button and i binded my custom edit method to the command button, setting the appropriate parameters to bindings on the form. I then double clicked by button and created a binding for the method in a bean.
When i edit a record and change for example the CountryId, CityId, AreaId and set the ParishName to test (so to force my validation method fire), i am shown the error but the data that i last inputed are lost, and the original are show.
In another case where i am doing the same thing, the data are kept.
For example, i have a record with CountryId:UK, CityId:London, AreaId:Finchley, ParishName: North Finchley and when i edit the record and define CountryId:USA, CityId:New York, AreaId:Manhattan, ParishName: test, i get the error message but the data are the original (CountryId:UK, CityId:London, AreaId:Finchley, ParishName: North Finchley). I want to keep the last entered data. In some forms this is done automatically, but in this form i didn't do anything, just dragged and defined, and is not working.
Anyone please help?
Antonis

I apologize for insisting on this, but in my humble opinion it's not useful to try and figure out why your hand-written example is not working if already the declarative way is not working as we expect. We need to figure out why the declarative way is not working first.
One of my primary jobs is helping customers use ADF correctly and understand how it works internally.
The code in your updateParish() method is redundantly applying updates to entity attributes that ADF will already have applied to the entity for you. To see this for yourself, you can set a breakpoint in one of the setter methods of your entity object and you'll see that your code is applying the updates a second time.
I see one reason why your error reporting won't be working as expected, which is that you are directly using the entityImpl object to apply the values. The ADF bundled exception mode only works when you use the view object row to apply the updates to the entities indirectly. Howing using the view object row to apply the values is what ADF will have already done automatically for you, so it's not necessary to do that.
It's also not a best practice to pass a literal integer value for the first argument of setAttribute(). If for any reason the constant values change, then your code will break. You should call setAttribute("TheAttributeName",thevalue) instead for more robust code.
Finally, your programmatically setting the user principal name and current date time can also be handled for you automatically by ADF by setting those attributes to be of the correct "History Attribute" type. See section "6.6.3.10 History Attributes" in the ADF Developer's Guide for Forms/4GL Developers on the ADF Learning Center at http://www.oracle.com/technology/products/adf/learnadf.html
Set a breakpoint in your validation method and debug the completely declarative edit form with the simple (Commit) button. We need to understand if the:
(a) validation is executing, failing, but the validation error is not being reported correctly, or
(b) validation is never being enaged at all.

Embedded videos not behaving the same

Hi:
I just put some video clips on my web site. I have embedded
them. 3 clips are similar in terms of size of file and length of
clip. When I click them from the web site 2 of them immediately
display the QuickTime Player with a download progress bar. The
third one, however, just shows the big blue Q on the page until the
entire video is downloaded then the player appears but it's about a
35 second wait. I'm sure I handled the 3 clips the same why do they
show up differently. I'm afraid a lot of people won't hang around
that long not knowing what's going on.
Any suggestions?

NOTE that you have autoplay set to FALSE:<embed
src="video%20clips/Soul%20Brothers%202.mov" width="185"
height="148"
autoplay="false"></embed> <embed
src="video%20clips/Afrikadey%20med%20large%20copy.mov"
width="249"
height="197" autoplay="false"></embed>You don't have
these coded properly
for the ActiveX fix in Internet Explorer.

Terminal not Behaving the Same with Text Clippings as in 10.5

I just upgraded to an Intel Mac from a G4 tower (very nice) and I have a lot of text clippings that I drag and drop into Terminal which now have back slashes embedded in them like this:
while true\
do\
ls -ltr dx|grep "`date +%b\ %e`"\
ls -ltr |grep "`date +%b\ %e`"\
ping -c 1 dx1|grep "packet loss"\
ping -c 1 dx2|grep "packet loss"\
date\
sleep 45\
done\
where do these come from and how do I get rid of them - I had to add them above so I know they aren't in the text clipping. Also I can copy inside Terminal window to window and it doesn't add them.
Any thoughts? It's fairly annoying.

I have several scripts that I have sitting on my desktop as text clippings that work fine in 10.5 but now that I have 10.6 (new iMac) I get these back slashes after every line. I could just as well I suppose make these things aliases or just files in Linux that I run but I've been using them as text clippings that I just dump into a terminal window and everything in the text clipping is done - now terminal is misinterpreting something. They are the same text clippings - if I use them in 10.5 that terminal has no problems - no back slashes.

Urgent - Things not working the same in server and local machine

Hi,
I have created an advanced table under advanced table as per the instructions in the dev guide. When the Add Row button is pressed in the parent table, I am inserting rows into the child VO and hence I should see rows in the child table in the UI. This is working fine in local machine. But when I deploy in the server it is not working. The child table is showing no search conducted. I have good OAF experience and have deployed things properly. But what could I be missing?

Hi Sumit,
"If the Child VO is not getting executed, please check the code which is responsible to execute the child VO. Do pay attention to exit clauses (like if conditions which skips a clause) and pay attention. "
- If those things were a problem, it wouldn't have run in the local machine also right? Also, I ran diagnostics on the server and I can see the child VO is having the rows. It is something to do with the association of the child with the parent. But again: it's working fine on the local. That's what is bothering me and that's why I need some expert help. If you want, I can send you the page, controller and the AM ( 3 files)
Of course redeploying the entire code, importing pages and bouncing is an option that could be explored.
- Done that multiple times with a lot of care. Cleared Cache etc etc.

How do you get Firefox to remember the response sent to remember password for a site and then not ask the same question over and over?

How do you get Firefox to remember the response sent to remember password for a web site and not ask over and over? The desktop version has a dialog box that you can check that says "Don't ask me this again". The mobile version doesn't. A real pain!
Thankx

You can switch off or uncheck the remember password in your settings :-)

TS3899 Can two people have the same email address and password on their phone?

Can two people have the same email address and password on their phone?

I guess so. But the email content will mirror on both phones.
If you are talking about your Apple ID and iCloud email, yes, it is possible, but again the phones will mirror. You should not have the same Apple ID and iCloud both.
Why?
If you explain the reason for the question we may have a solution that works for you.

Firefox causes crash when using Youtube explorer does not have the same effect

firefox causes crash when using Youtube explorer does not have the same effect

Troubleshooting extensions and themes
* https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
Check and tell if its working.

In IPhoto 11 I have made an album and rearrange the photos in the order I require them. When export the album to allow me to burn them to disk to be viewed in Windows they do not maintain the same order. What am I doing wrong?

In IPhoto 11 I have made an album and rearrange the photosin the order I require them. When export the album to allow me to burn them todisk to be viewed in Windows they do not maintain the same order. What am I doingwrong?

When you sort the Album in iphoto are you sorting manually? Or by date of the photos?
When you sort in the Finder how are are you sorting?
Here's one way to do what you're trying to do:
Create your Album and sort the pics as you want them. Then Photos Menu: Batch Change -> Set Title to Text "John's Birthday", for instance, and tick the box to append a number to each Photo. Now your photos are titled 'John's Birthday 001, John's Birthday 002 ... etc'
Then File -> Export and in the Export dialogue set the Filename to "Use Title"
Sort on Filename in the Finder and you end up with a folder full of images in the same order as the Album in iPhoto.
Regards
TD

Why are Bounce in Arrange and Environment not 1 & the same?

Just wondering why (like in 8) Bouncing in the Arrange window and in the Environment are different? I noticed this again in 9, when doing stems, bouncing in the Environment (so I can solo different tracks more quickly) I was wondering why on earth LP9 was adding tracks to the Audio Bin despite the box not being ticked. I clicked on Bounce in the Arrange, and sure enough, the Add to Audio Bin button was checked.
Does anyone know why it seems these Bounce buttons are independent of each other? The other issue is if you have a solo output (if I'm bouncing Mono) - and click on bounce in the Arrange window - it makes the file stereo (The Interleaved/Split menu is selectable) where as doing the same thing in the Environment (albeit clicking bounce on the mono output channel) Greys out that field on Split (as it should be)
B

Ben Collier wrote:
Hi Erik - sorry to take so long to reply - I didn't get an email reminder - odd...
I think they reset something on the forums, because my subscription to the forum was gone a few days ago as well, I had to subscribe again (which is not really a chore, luckily... )
The Bnce button at the bottom of the Out 1-2 in the Environment (I don't use the mixer)
Mixer & env mixer are the same thing, really.
and the Bounce button at the top of the Arrange window
Now I have to start Logic, a bounce button at the top of the Arrange window...?
Ah, now I get it, the toolbar! (I never use that and click it away in all my projects & templates.)( That is the same command as choosing bounce from the File menu, or hitting ctrl-B (my KC for Bounce
are not going to the same bounce window (odd I know!). I've noticed that if the Arrange-Bounce window has "Add to Audio Bin" selected and the you bounce (or press Bnce) from the Environment window, and switch "Add to Audio Bin" off in the Environment's Bouonce window - it will still add them to the audio bin because that setting is on in the Arrange Bounce window - it's driven me bonkers on many occaisions! Try it - you'll see what I mean. It's been there in 8 and it's still there in 9.
Actually, I do not see it behave like this. Here it appears that both bounce windows are in fact identical, and that wherever the last setting was made, that becomes the setting the next time you get a bounce window, either from the Env mixer or from the Bounce command in the File menu or indeed the bounce button in the toolbar or in the 'regular' mixer. They all pop up the same window, with the last set settings still set. whether it be *Add to Audio Bin* or *Add to iTunes Library* plus all combinations of both and neither.
I've also noticed level differences on our main rig when importing them, despite both being bounced at 96 and in realtime.
I find it quite difficult to say this, but I think those differences have nothing to do with the method of bouncing. And it being at 96 kHz does not mean it has audibly different levels, on the contrary, a bounce at 96 is probably not discernable from one at 48, in a blind listening test.
I'm convinced that in whatever way you give the command to bounce, it is the same process. There must be another overlooked factor responsible for those level differences. I trust you have the Normalise function Off when you bounce? And you have not changed the pan law settings between bounces? And no plugins that use some Random settings?

My left shift key on Macbook Pro Retina (15") is behaving like the F11 key (show/hide open windows). The key behaves the same for the laptop keyboard and for an external Apple keyboard? This just started in last week after 6 months of use

My left shift key on Macbook Pro Retina (15") is behaving like the F11 key (show/hide open windows).
The left shift key behaves the same on the laptop keyboard and on an external Apple keyboard.
This just started in last week after 6 months of use. The right shift key and other keys on the keyboard all appear to work correctly.
Suggestions greatly appreciated.

I have a solution to this issue now after a discussion with Apple Support. Some where in the last few weeks, there was a change in the key that would do a Show Desktop under the Mission Control settings in the System Preferences. Even though the key sequence that was shown for the Show Desktop setting did not include the Left SHift key, by changing this first to having no key sequence and applying that and then changing it back to the F11 key, the Left SHift key issue that I was having has cleared up.
A second issue that was uncovered was that the SSD had some issues (uncovered when I ran Disk Utility using the Repair Disk key). I had to restart and use the Disk Utility through the Command R sequence to get to the stand alone Disk Utility. The SSD appears to be running better as a result as well.
Hope that this is of use to someone else in the future.

IPhoto 08 not behaving the same in G5 and MacIntel

Similar Messages

Maybe you are looking for