IPhoto 08 Unable to Export

My hard drive is partitioned into three drives, a primary boot drive, a secondary boot drive, and a swap drive. My iPhoto library sits on my swap drive which has plenty of free space. I recently imported a modest number of photos (~200), made a few image enhancements, and wanted to export to an external drive where I store all of my final edited photos. I've done this many times with iPhoto with no problem. However, when I tried to export just 50 photos to my external hard drive, only 30 were actually transferred, when I got a message saying "Unable to create /Volumes/\[disk name\]/Pictures". I am actually trying to export to a sub-folder of "Pictures" which I found odd since both folders are already created.
So, next I tried to export to my swap drive and the exact same thing happened. Then I tried to export just one file and got the same error. However, when I went back and tried to re-export one of the files that successfully exported previously, it worked just fine again. But both of the photos were from the same import and both were edited, so there's no reason they should act differently. I then tried to export to my desktop on my primary boot drive and had the same problem. Memory shouldn't be an issue as I have about 220GB on my external, 25GB on my swap, and 800MB on my primary boot of free space. The 50 photos should not be more than 200MB at most.
Last thing is that I went back and looked at iPhoto and I noticed that even though all the photos show up (in full res, not just thumbs), the photos that I cannot export, have a memory listed as 0kb. There are a couple photos that were unedited that still show up as having correct memory. So this must be the root of my problem. So how in the world do I fix it?
-- Brandon

Welcome to the Apple Discussions.
800MB on my primary boot of free space.
That immediately raises a red flag. it's generally recommended that one have a minimum of 10 GB free space on a boot drive and 20 or so if you use iDVD much. The space is needed for temporary and virtual memory files by both system and applications.
I suggest you free up some space on the boot drive and see if that will correct the situation. Even it it does not you will have problems with only 800 MB of free space on the boot drive. Freeing up the free space will have an impact on system and application speed.
There have been reports of users who have let their free space on the boot drive dwindle down to the point where it would not boot.

Similar Messages

IPhoto unable to export EXIF information correctly for photos with color filters

I have imported photos from my phone to iPhoto and noticed that some of the photos do not have EXIF information when exporting to other places or synced back to iPhone.When I am trying to view the photo in iPhoto, the date is correctly shown.
The date shown in the iPhone photo moment tab is the import date rather than the original date when the photos were taken.
When I am trying toview the photo in iPhoto, the date is correctly shown.
(for example: the photo was taken in Dec 1, 2012, imported to iPhoto in Nov 1, 2014, and synced back to iPhone.
the date shown in iPhone is Nov 1, 2014, the date shown in iPhoto is Dec 1, 2012.)
After further looking into the details of the photo, i have noticed that theses photos are taken with color filters in iPhone or bursting photos or panoramas.
(e.g a mono or fade filter choosed when taking photo in iPhone camera).
When choose " reveal in finder" option in iPhoto for these photos, there are two options : view original or modified.
the original files contain EXIF information and the modified files do not.
the original files show photo without color filter
the modified files shows photo with color filter, the modified photos are what the photos were contained in iPhone originally.
When exported syncing these photos, the modified files was exported/synced, however, no EXIF information was exported. photos only contains the creation date.
These resulted in a mess in the photo collection in my phone. photos were displayed in wrong order.
When i export these photo to another location for back up purposes, i choose "include all location information, name, keyword", only the modified photos were exported without any EXIF information.
The only way I found is reveal these photos in finder.
iPhoto seems unable to export/sync photos that are taken with color filters/ panorama photos/ bursting photos.
is there any way to solve this problem? Thank you!

i have just taken a photo with effects and imported to iPhoto, The EXIF can be exported. The problem is syncing.
I think this problem only happen to photo taken before iOS 8.
EXIF of photo with effects unable be synced back to iPhone.
Apple acknowledged that the new Photos.app in iOS 8 is handling edits differently, see:
iPhoto and Aperture don't have edits to photos you import from iOS 8 devices
In iOS 8 edited versions are stored in a different way from previously. And it looks like there is now a bug, that prevents the older edited versions from being handled correctly.
Send a bug report to Apple. You could use the feedback form, if you do not have a developer account: http://www.apple.com/feedback/iphoto.html

Unable to export from iPhoto to other location

Would appreciate any help and guidance with above please.
I don't normally use iPhoto but I have a couple of photos' I'd like to transfer to my Pictures folder.
When I select Export function, I select the desired location and click the Export button. A small ' exporting ' window pops up with a flash of the blue and white chevron (doing something ) strip followed by a statement ' unable to create/users/names/pictures.
Probably doing something wrong.
Thanks & regards

Unsure as to how but I've obviously done something wrong..it does help to read the book first!
However, other images in iphoto export ok,email ok and I have imported into iphoto and then exported back so everything does seem to be working ok.
I've obviously messed up somehow with about 5 particular images that'll I'll put down to user error!!
Thanks for prompt response Terence and have given you a green tick for making me look further. Should have tried that in the first place.
Thanks again, regards John

I'm unable to export any slideshow from Iphoto 9.5.1?

After creating a slide show in the latest version of IPhoto with music attached, i am unable to export the slideshow as standard definition or high definition. The export progress bar pops up with a black screen but never moves or creates the show? Anyone have any ideas? I am on a Mac Pro on OS X 10.9.3.

Some folks have fixed this by reinstalling iPhoto:
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2. Download it from the App Store to reinstall It's on your Purchases List* there.
For older versions that have been installed from Disk you'll need these additional steps:
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 or later they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
*Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

Unable to export slideshow in iPhoto

Iphoto exporting slideshow freezes. Slideshow plays in iphoto, but want to send to a few friends and unable to export. Followed the support faq guide and takes me through the process but when goes to 'export' nothing happens. Have waited 10-15 min thinking it is sizing photos and nothing.
thanks,
john

Reinstall the app.
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2. Download it from the App Store to reinstall It's on your Purchases List* there.
3. Re-install.
*Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

Unable to export iPhoto

I was exporting photos to a slideshow in iPhoto with no problem, until now, when I try to, I get a msg. saying 'Unable to create/Users/'my user name', etc...
I'm using iPhoto '08, version 7.1.5. I've tried exporting a much smaller amount, and clearing out space in the computer, but to no avail... Thanks.

Mke the slideshow in iPhoto and then export that, rather than exporting to the QuickTime movies. You'll get better quality.
On the subject of backing up:
*Most Simple Back Up:*
Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
*Slightly more complex:*
Use an app that will do *incremental* back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically. Examples of such apps include Chronosync or DejaVu. But are many others. Search on MacUpdate
My Library lives on my iMac. It's Backed up to two external hard disks every day. These disks are permanently attached to the iMac. These back ups run automatically. One is done by Time Machine, one is a bootable back up done by SuperDuper
It’s also backed up to a portable hard disk when ever new photos are added. This hard disk lives in my car. For security, this disk is password protected.
I have a second off-site back up at a relative’s house across town. That’s updated every 3 or 4 months.
My Photos are backed up online. There are many options: Flickr, Picasa, SmugMug etc. However, check the terms of your account carefully. While most sites have free uploading, you will often find that these uploads are limited in terms of the file size or the bandwidth you can use per month. For access that allows you to upload full size pics with no restrictions you may need to pay.
Every couple of months I test the back ups to make sure they are working correctly. It’s very easy to mis-configure a back up application, and the only way to protect against that is to do a trial restore.
Regards
TD

Unable to export photos from i-photo

When I click on a photo, go to file > export - I am unable to export any photos. How can I export them?

The fact that when you click on a thumbnail and get a blank, black window indicates that the library is damaged and needs to be repaired. Apply the two fixes below in order as needed:
Fix #1
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - run Option #4 to rebuild the database followed by Option #1 if necessary.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button and select the library you want to add in the selection window..
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.

IPhoto won't export from some folders.

I'm trying to get all my previous iPhone photos sorted into year groups so that I can import them as Albums into my shiny new phone.
In iPhoto I created five folders labelled by their year and pulled images into the respective folders.
I dock my iPhone, and in iTunes I select the folders I want to import from, however, iTunes tells me that some of those folders are empty.
I go back to iPhono and attempt to export from the suspect folders, and this cannot be done, either by File> Export, or by simply dragging nd dropping. The OK folders behave normally.
Why do I see images in folders in iPhoto, but I'm unable to export them?
Any clues welcome.

In iPhoto, Folders cannot contain Photos. Albums and Events contain photos. Folders can only contain Albums or nested folders.
So are you referring to Albums or Events?
Anyway these photos won't sunc because iPhoto can't find them. In the case of the message you're getting it sounds like you Referenced them when importing.
Are you running a Managed or a Referenced Library?
A Managed Library, is the default setting, and iPhoto copies files into the iPhoto Library when Importing. The files are then stored in the Library package
A Referenced Library is when iPhoto is NOT copying the files into the iPhoto Library when importing because you made a change at iPhoto -> Preferences -> Advanced. (You unchecked the option to copy files into the Library on import) The files are then stored where ever you put them and not in the Library package. In this scenario you are responsible for the File Management.

Unable to Export iMovie project in everyway I have attempted for the past 2 weeks. Please Help! Due date coming up!

I've unable to Export iMovie project in everyway I have attempted for the past 2 weeks.I have a late 2012 iMac with 8gb of RAM and 700 gb of free space on the hard drive. The video I am trying to export is 48 mins long with most of the source footage from a NIkon D3100 and several other cammcorders. I've been exporting with Apple Intermediate codec because that was the only one that has work so far but it only worked once and since then I have had to make changes to the project and now I'm unable to get it to work. For all Quicktime exports in H.264 or AIC (my prefered format for this export since I figured it'd offer the highest quality when I import it into Encore for making a dvd out of it) Which just stops exporting in the last few minutes without explination as to why or it crashes and quits. It either leaves a partial file or nothing at all. When I do "export movie" I get a "not enough memory Heap zone error"
I don't know what to do any help would be greatly appreciated!
By the way I happen to have Adobe CS6 Production Premium but didn't know how to use it as well when starting the project and now really regret not using it because it appears to be 10x more stable and capable of handling all the tasks I want it to do.

Hi
Error -108 memFullErr Ran out of memory [not enough room in heap zone]
Turn off - TimeMachine usually works - re-try.
(the Application down in the Dock - not the Device)
But this can mean many thing's - My first thought is
Free Space on Start-Up hard disk. How much ? (other disks do not count)
AppleMan1958
Are your event clips in h.264? If so, you can solve this by Right clicking on your Event Name and choose "Optimize Media". You can choose Full for 1080P or Large for 960P according to your preference.
After you have optimized your Event, you should be able to Share with no problem.
Lennart Thelander
-108 mean you are running out of (free) RAM.
Try restarting the computer just prior to sharing. That frees up RAM.
from mynameisearl
Final Entry
Ok - after much cutting, trial and error and days of work I have never really established a root cause for the -108 error. Nothing I did resolved the issue to the orginal project.
The only work around I have found is to split the Original Project into two.
What I found was that anything around the 60 mins mark and above just failed to render in HD and showed the -108 error.
What worked for me was creating two project files - one around 57mins long - the other a part 2 - around 17 mins long. All using exactly the same source clips, photo's, music and transitions as the orginal.
This now works. I guess having it split in two makes it a little easier to work with as I wont have to keep rendering the first part which does not change but really wish Apple would throw some light on this.
Anyway - I hope all of the above at least proves useful for others.
Good Luck

HT1473 I have an EZ Vinyl/Tape Converter (MixMeister) to export vinyl records to iTunes. The computer downloads (records) the songs from the record, but when it is to be exported to iTunes, I get a window that says iTunes unable to export. (compatability?

I have an EZ Vinyl/Tape Converter (MixMeister) to record vinly records to my computer; which then is supposed to automatically download to my iTunes program. But it does not. It records and stores (somewhere) in the computer, but when it is supposed to be exported into iTones, I get a window that says something about incompatability and/or "close other windows in iTunes; but there are no open windows and iTunes is closed. I followed all instructions to EZ Vinyl to the T, but no export/import to iTunes. What am I doing wrong? What do I need to do? THX!

Tony, thanks so much. The message reads: "Unable to export to iTunes. Please make sure you close any active windows in iTunes. Would you like to try exporting again? [Yes] [No]"
And of course I click on Yesl, but I keep getting the same window message. I read somewhere, that MixMeister is not compatible with Apple iTunes 10 series versions. The advice said to go to control panel; Programs; click on iTunes; click on Change; click on Repair. I tried that, but I still get the same window message. Then I read that I should contact the mixmeister support website, which will be my next step. But if you can provide any direction, I would greatly appreciate it. Thanks again!
Dan

I am receiving this error message when trying to export pictures: 'Unable to Export": An internal error has occured: Win32 API error 2 ( "The system cannot find the file specified.") when calling ShellExecuteExW from AgWorkspace.shellExecute.// I have a H

I am receiving this error message when trying to export pictures: 'Unable to Export": An internal error has occured: Win32 API error 2 ( "The system cannot find the file specified.") when calling ShellExecuteExW from AgWorkspace.shellExecute.// I have a HP ENVY Phoenix, fully loaded, 1 1/2 years old.

Nevermind I fixed it. Thank you.

Unable to export from the node.

I need to export from a node in directory server.
This node contain more than 1 million user.
I am unable to export the node.
I have tried running ldap search on the node but i only git the node ldif and then ldapserach hangs.
From start console also nothing happens.
I used ldapbrowser to export but that is also hanging.
Any ideas how to export the node.
I have seen the
I am using Sun ds 5.2 patch 4 on solaris sparc

Try stopping your Directory Server instance and running db2ldif to export the database into an LDIF file.

Flash Builder 4 for Mac: Unable to export a release build

Hi
I've been unable to export release builds of any AIR projects when using a Mac installation of Flash Builder 4. I can run the AIR apps within the IDE, but I keep getting the following error when exporting: "One or more errors were found while trying to build the release version. Unable to export."
The weird thing is that I can export the exact same AIR projects using my Windows 7 copy of FB4 just fine, without any errors.
Details of the Mac installation:
OSX 10.5.8
Flash Builder 4 plug-in version, v4.0.1, on Eclipse v3.4.2
I performed a fresh install of FB4 today (before anyone suggests it ) but to no avail.
The error log - I wasn't sure what to copy, so just took everything that had the right time entry:
!ENTRY com.adobe.flexbuilder.project 4 43 2011-01-29 17:35:11.940
!MESSAGE ExportReleaseVersionWizard: internal error occurred
!STACK 0
java.lang.reflect.InvocationTargetException
at org.eclipse.jface.operation.ModalContext.runInCurrentThread(ModalContext.java:479)
at org.eclipse.jface.operation.ModalContext.run(ModalContext.java:372)
at org.eclipse.jface.wizard.WizardDialog.run(WizardDialog.java:934)
at com.adobe.flexbuilder.exportimport.releaseversion.ExportReleaseVersionManager.doExport(Ex portReleaseVersionManager.java:305)
at com.adobe.flexbuilder.exportimport.releaseversion.ui.ExportReleaseVersionWizard.doBuild(E xportReleaseVersionWizard.java:152)
at com.adobe.flexbuilder.exportimport.releaseversion.ui.ExportContentPage.setVisible(ExportC ontentPage.java:115)
at org.eclipse.jface.wizard.WizardDialog.updateForPage(WizardDialog.java:1161)
at org.eclipse.jface.wizard.WizardDialog.access$2(WizardDialog.java:1139)
at org.eclipse.jface.wizard.WizardDialog$4.run(WizardDialog.java:1128)
at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:70)
at org.eclipse.jface.wizard.WizardDialog.showPage(WizardDialog.java:1126)
at org.eclipse.jface.wizard.WizardDialog.nextPressed(WizardDialog.java:820)
at org.eclipse.jface.wizard.WizardDialog.buttonPressed(WizardDialog.java:369)
at org.eclipse.jface.dialogs.Dialog$2.widgetSelected(Dialog.java:624)
at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:228)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1561)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1585)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1570)
at org.eclipse.swt.widgets.Widget.notifyListeners(Widget.java:1360)
at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3482)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3068)
at org.eclipse.jface.window.Window.runEventLoop(Window.java:825)
at org.eclipse.jface.window.Window.open(Window.java:801)
at org.eclipse.ui.internal.handlers.WizardHandler$Export.executeHandler(WizardHandler.java:9 7)
at org.eclipse.ui.internal.handlers.WizardHandler.execute(WizardHandler.java:273)
at org.eclipse.ui.internal.handlers.HandlerProxy.execute(HandlerProxy.java:281)
at org.eclipse.core.commands.Command.executeWithChecks(Command.java:476)
at org.eclipse.core.commands.ParameterizedCommand.executeWithChecks(ParameterizedCommand.jav a:508)
at org.eclipse.ui.internal.handlers.HandlerService.executeCommand(HandlerService.java:169)
at org.eclipse.ui.internal.handlers.SlaveHandlerService.executeCommand(SlaveHandlerService.j ava:247)
at org.eclipse.ui.internal.actions.CommandAction.runWithEvent(CommandAction.java:157)
at org.eclipse.jface.action.ActionContributionItem.handleWidgetSelection(ActionContributionI tem.java:583)
at org.eclipse.jface.action.ActionContributionItem.access$2(ActionContributionItem.java:500)
at org.eclipse.jface.action.ActionContributionItem$5.handleEvent(ActionContributionItem.java :411)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1561)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1585)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1570)
at org.eclipse.swt.widgets.Widget.notifyListeners(Widget.java:1360)
at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3482)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3068)
at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2384)
at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2348)
at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2200)
at org.eclipse.ui.internal.Workbench$5.run(Workbench.java:495)
at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:288)
at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:490)
at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:113)
at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:193)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLau ncher.java:110)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.jav a:79)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:386)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:592)
at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:549)
at org.eclipse.equinox.launcher.Main.basicRun(Main.java:504)
at org.eclipse.equinox.launcher.Main.run(Main.java:1236)
Caused by: java.lang.AbstractMethodError: org.apache.xerces.dom.DeferredElementImpl.getTextContent()Ljava/lang/String;
at com.adobe.flexbuilder.project.air.build.ApolloXMLBuilder.alterXmlTree(ApolloXMLBuilder.ja va:252)
at com.adobe.flexbuilder.project.air.build.ApolloXMLBuilder.generateXmlFile(ApolloXMLBuilder .java:142)
at com.adobe.flexbuilder.project.air.build.ApolloXMLBuilder.build(ApolloXMLBuilder.java:95)
at com.adobe.flexbuilder.exportimport.releaseversion.ExportReleaseVersionManager$2.execute(E xportReleaseVersionManager.java:249)
at org.eclipse.ui.actions.WorkspaceModifyOperation$1.run(WorkspaceModifyOperation.java:104)
at org.eclipse.core.internal.resources.Workspace.run(Workspace.java:1800)
at org.eclipse.ui.actions.WorkspaceModifyOperation.run(WorkspaceModifyOperation.java:116)
at org.eclipse.jface.operation.ModalContext.runInCurrentThread(ModalContext.java:464)
... 61 more
Root exception:
java.lang.AbstractMethodError: org.apache.xerces.dom.DeferredElementImpl.getTextContent()Ljava/lang/String;
at com.adobe.flexbuilder.project.air.build.ApolloXMLBuilder.alterXmlTree(ApolloXMLBuilder.ja va:252)
at com.adobe.flexbuilder.project.air.build.ApolloXMLBuilder.generateXmlFile(ApolloXMLBuilder .java:142)
at com.adobe.flexbuilder.project.air.build.ApolloXMLBuilder.build(ApolloXMLBuilder.java:95)
at com.adobe.flexbuilder.exportimport.releaseversion.ExportReleaseVersionManager$2.execute(E xportReleaseVersionManager.java:249)
at org.eclipse.ui.actions.WorkspaceModifyOperation$1.run(WorkspaceModifyOperation.java:104)
at org.eclipse.core.internal.resources.Workspace.run(Workspace.java:1800)
at org.eclipse.ui.actions.WorkspaceModifyOperation.run(WorkspaceModifyOperation.java:116)
at org.eclipse.jface.operation.ModalContext.runInCurrentThread(ModalContext.java:464)
at org.eclipse.jface.operation.ModalContext.run(ModalContext.java:372)
at org.eclipse.jface.wizard.WizardDialog.run(WizardDialog.java:934)
at com.adobe.flexbuilder.exportimport.releaseversion.ExportReleaseVersionManager.doExport(Ex portReleaseVersionManager.java:305)
at com.adobe.flexbuilder.exportimport.releaseversion.ui.ExportReleaseVersionWizard.doBuild(E xportReleaseVersionWizard.java:152)
at com.adobe.flexbuilder.exportimport.releaseversion.ui.ExportContentPage.setVisible(ExportC ontentPage.java:115)
at org.eclipse.jface.wizard.WizardDialog.updateForPage(WizardDialog.java:1161)
at org.eclipse.jface.wizard.WizardDialog.access$2(WizardDialog.java:1139)
at org.eclipse.jface.wizard.WizardDialog$4.run(WizardDialog.java:1128)
at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:70)
at org.eclipse.jface.wizard.WizardDialog.showPage(WizardDialog.java:1126)
at org.eclipse.jface.wizard.WizardDialog.nextPressed(WizardDialog.java:820)
at org.eclipse.jface.wizard.WizardDialog.buttonPressed(WizardDialog.java:369)
at org.eclipse.jface.dialogs.Dialog$2.widgetSelected(Dialog.java:624)
at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:228)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1561)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1585)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1570)
at org.eclipse.swt.widgets.Widget.notifyListeners(Widget.java:1360)
at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3482)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3068)
at org.eclipse.jface.window.Window.runEventLoop(Window.java:825)
at org.eclipse.jface.window.Window.open(Window.java:801)
at org.eclipse.ui.internal.handlers.WizardHandler$Export.executeHandler(WizardHandler.java:9 7)
at org.eclipse.ui.internal.handlers.WizardHandler.execute(WizardHandler.java:273)
at org.eclipse.ui.internal.handlers.HandlerProxy.execute(HandlerProxy.java:281)
at org.eclipse.core.commands.Command.executeWithChecks(Command.java:476)
at org.eclipse.core.commands.ParameterizedCommand.executeWithChecks(ParameterizedCommand.jav a:508)
at org.eclipse.ui.internal.handlers.HandlerService.executeCommand(HandlerService.java:169)
at org.eclipse.ui.internal.handlers.SlaveHandlerService.executeCommand(SlaveHandlerService.j ava:247)
at org.eclipse.ui.internal.actions.CommandAction.runWithEvent(CommandAction.java:157)
at org.eclipse.jface.action.ActionContributionItem.handleWidgetSelection(ActionContributionI tem.java:583)
at org.eclipse.jface.action.ActionContributionItem.access$2(ActionContributionItem.java:500)
at org.eclipse.jface.action.ActionContributionItem$5.handleEvent(ActionContributionItem.java :411)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1561)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1585)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1570)
at org.eclipse.swt.widgets.Widget.notifyListeners(Widget.java:1360)
at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3482)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3068)
at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2384)
at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2348)
at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2200)
at org.eclipse.ui.internal.Workbench$5.run(Workbench.java:495)
at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:288)
at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:490)
at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:113)
at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:193)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLau ncher.java:110)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.jav a:79)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:386)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:592)
at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:549)
at org.eclipse.equinox.launcher.Main.basicRun(Main.java:504)
at org.eclipse.equinox.launcher.Main.run(Main.java:1236)
!ENTRY org.eclipse.core.resources 4 2 2011-01-29 17:35:12.026
!MESSAGE Problems occurred when invoking code from plug-in: "org.eclipse.core.resources".
!STACK 0
java.lang.AbstractMethodError: org.apache.xerces.dom.DeferredElementImpl.getTextContent()Ljava/lang/String;
at com.adobe.flexbuilder.project.air.build.ApolloXMLBuilder.alterXmlTree(ApolloXMLBuilder.ja va:252)
at com.adobe.flexbuilder.project.air.build.ApolloXMLBuilder.generateXmlFile(ApolloXMLBuilder .java:142)
at com.adobe.flexbuilder.project.air.build.ApolloXMLBuilder.build(ApolloXMLBuilder.java:95)
at com.adobe.flexbuilder.project.air.build.ApolloXMLIncrementalBuilder.build(ApolloXMLIncrem entalBuilder.java:74)
at org.eclipse.core.internal.events.BuildManager$2.run(BuildManager.java:633)
at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:37)
at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:170)
at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:201)
at org.eclipse.core.internal.events.BuildManager$1.run(BuildManager.java:253)
at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:37)
at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:256)
at org.eclipse.core.internal.events.BuildManager.basicBuildLoop(BuildManager.java:309)
at org.eclipse.core.internal.events.BuildManager.build(BuildManager.java:341)
at org.eclipse.core.internal.events.AutoBuildJob.doBuild(AutoBuildJob.java:140)
at org.eclipse.core.internal.events.AutoBuildJob.run(AutoBuildJob.java:238)
at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55)
!ENTRY org.eclipse.core.resources 2 75 2011-01-29 17:35:12.037
!MESSAGE Errors during build.
!SUBENTRY 1 com.adobe.flexbuilder.project 2 75 2011-01-29 17:35:12.037
!MESSAGE Errors running builder 'AIR application.xml Builder' on project 'aqua'.
!SUBENTRY 1 com.adobe.flexbuilder.project 2 75 2011-01-29 17:35:12.037
!MESSAGE org.apache.xerces.dom.DeferredElementImpl.getTextContent()Ljava/lang/String;
!STACK 0
java.lang.AbstractMethodError: org.apache.xerces.dom.DeferredElementImpl.getTextContent()Ljava/lang/String;
at com.adobe.flexbuilder.project.air.build.ApolloXMLBuilder.alterXmlTree(ApolloXMLBuilder.ja va:252)
at com.adobe.flexbuilder.project.air.build.ApolloXMLBuilder.generateXmlFile(ApolloXMLBuilder .java:142)
at com.adobe.flexbuilder.project.air.build.ApolloXMLBuilder.build(ApolloXMLBuilder.java:95)
at com.adobe.flexbuilder.project.air.build.ApolloXMLIncrementalBuilder.build(ApolloXMLIncrem entalBuilder.java:74)
at org.eclipse.core.internal.events.BuildManager$2.run(BuildManager.java:633)
at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:37)
at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:170)
at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:201)
at org.eclipse.core.internal.events.BuildManager$1.run(BuildManager.java:253)
at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:37)
at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:256)
at org.eclipse.core.internal.events.BuildManager.basicBuildLoop(BuildManager.java:309)
at org.eclipse.core.internal.events.BuildManager.build(BuildManager.java:341)
at org.eclipse.core.internal.events.AutoBuildJob.doBuild(AutoBuildJob.java:140)
at org.eclipse.core.internal.events.AutoBuildJob.run(AutoBuildJob.java:238)
at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55)

Hi Chris
Thanks for your reply.
I had already seen that post, and the answers were not applicable to me. But thankfully I have found the solution now!
I Googled the error message: "org.apache.xerces.dom.DeferredElementImpl.getTextContent()Ljava/lang/ String", and came across the following bug report:
http://code.google.com/p/alkwarel/issues/detail?id=10
As suggested in the link above, I deleted the xerces.jar located in user.home/Library/Java/Extensions/. I then cleaned my project, and FB4 for Mac finally exported the release build!
That bug has been annoying me for MONTHS. I'm so happy it's fixed now!
All the best,
Zabeen

Unable to Export the document in PDF

Hi,
Can any body guide me what general authoriztions settings are needed for a user to export the markeing documents in PDF.
bcz the user at remote location client is unable to export the douments in PDF.
Regards
Srini

HI
You need to go the authorization windows and in the search box please type "PDF" that would take u to the option that u are seeking then u can assign full read only or no authorizations as per your requirement .
also make sure that the path has been correctly defined for pdf files
Regards,
Manish
Edited by: manish.malik on Jul 1, 2010 12:50 PM

IPhoto 11 - Saving/Exporting Photos Edited in iPhoto 11

I just updated to iPhoto 11 from what I think was iPhoto 09. In my previous version of iPhoto, I would import photos from my camera, edit (crop, straighten, adjust, etc) and then I would FILE/Export photo in .jpg format to my hard drive for backup and upload to flickr.
When I follow this same procedure in in iPhoto 11, the edits that I make in iPhoto do not save to the exported photo. The application just exports the original file w/o edits.
What am I doing wrong? Is there a fix?
Thank you,
Charles

I am exporting as a JPG. I think I figured out the problem. In the old iPhoto I could export from the Edit menu. On this new version, I have click on the Photos button and go back to the screen that shows the whole event and export from there.
It's a pain and much less efficient but it seems to be working.

In iphoto i could export direct to flickr and facebook is it possible to this in photos ?

in iphoto i could export from the application to flickr and facebook
i cant seem to do this in photos
also where is the straighten button in edit ?

Yes - using the share feature (in the top bar the rectangle with an up arrow coming out of the top)
and straighten is part of Crop in editing
LN

IPhoto 08 Unable to Export

Similar Messages

Maybe you are looking for