IPhoto 09 just hangs now

I have my library (over 3000 photos/movies) on an external WD drive, connected to my Airport Extreme. When I start up iPhoto, nothing happens. It just hangs on the open screen and I get the beach ball. Then nothing.
It was all working fine until last night for some reason, when it suddenly just didn't work any more.
Does anyone else have experience with Airport Extreme and iPhoto 09?

They should really separate out content from the structure, as iTunes does, so that the wireless is used only to house the photographs themselves and the library structure, etc. is just on your local drive.
That came to iPhoto, oh, three years ago or thereabout. That said, I don’t recommend it. And the comparison with the iTunes Library is spurious. It’s not a lot more complex than your AddressBook. The iPhoto DB tracks multiple versions, edits, slideshows, books, calendars, edits etc etc etc. Anyway:
Simply go to iPhoto Menu -> Preferences -> Advanced and uncheck 'Copy Files to the iPhoto Library on Import'.
Now iPhoto will not copy the files, but rather simply reference them on your HD. To do this it will create an alias in the Originals Folder that points to your file. It will still create a thumbnail and, if you modify the pics, a Modified version within the iPhoto Library Folder.
However, you need to be aware of a number of potential pitfalls using this system.
1. Import and deleting pics are more complex procedures
2. You cannot move or rename the files on your system or iPhoto will lose track of them on systems prior to 10.5 and iPhoto 08. Even with the later versions issues can still arise if you move the referenced files to new volumes or between volumes.
3. Most importantly, migrating to a new disk or computer can be much more complex.
Always allowing for personal preference, I've yet to see a good reason to run iPhoto in referenced mode unless you're using two photo organisers.
Regards
TD

Similar Messages

  • IPhoto Just Hangs!

    Hello, can anyone help. Just upgraded to 9.2 and software just hangs with apple 'spinny' thing in the centre of the screen. Library upgrade seems to work and puts my albums etc on the left hand side but still just hangs with no photo's!!!

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD

  • IPhoto just hangs. GRR.

    I'm running iPhoto 09' on my Mac (OSX Leopard 10.5.8). It has a LOT of photos (96 GB).  I'm running a 250GB hard rive and I have 44GB free.
    So it's busy....
    BUT, when I open iPhoto it just hangs.  This started a week ago.  I can't alter or view any photos. As soon as the app opens, I get the spinning wheel.
    Any ideas?  I'd love to run a clean up, but how?
    Thanks!
    Jay

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD

  • ITunes just Hangs now

    Yesterday, I updated my iPhone 3GS to 3.1 and then updated iTunes to version 9.0. My iPod sync'd fine with my updated iTunes. My iPhone though just sits there. I hear the ding that a device has been plugged in, but then it just hangs the system. I have to force iTunes to shut down. I've restarted the iPhone and restarted the computer a few times. I didn't see any other thread about this. Anyone else having this problem?

    Nevermind, I disabled my PC Doctor virus software, and now it will sync. I'll have to check on their website and see what the problem is.

  • I upgraded to lion and now iPhoto just hangs, I tried clearing out all content but still same I need this app for my business please help

    I upgraded to Lion and now iphoto hangs ( I have an intel imac 4gb 2.66 ghz). Tried wiping all content but no change , maybe third party plugin? But how do I know which one? Better question is: is there a known plugin causing trouble?

    Try this:  launch iPhoto with the Option key held down and create a new, test library.  Import some photos and check to see if the same problem persists.
    If you can't create and open a new, test library make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
    1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
         User/Home()/Library/ Preferences folder.
    2 - delete iPhoto's cache file, Cache.db, that is located in your
         User/Home()/Library/Caches/com.apple.iPhoto folder. 
    Click to view full size
    3 - launch iPhoto and try again.
    NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto.  You'll also have to reset the iPhoto's various preferences.
    If you can create and use a new library the problem lies with your current library.  In that case make a temporary, backup copy (select the library and type Command+D) and apply the two fixes below in order as needed:
    Fix #1
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Select the options identified in the screenshot. 
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    Download iPhoto Library Manager and launch.
    Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
    In the next  window name the new library and select the location you want it to be placed.
    Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

  • Iphoto 9.3 and Mountain Lion Problems : Cant access my library : rebuilding doesn't work just hangs for hours

    My Macbook Pro running Snow Leopard, had hard drive failure so I had to borrow a friends similar machine to access my iPhoto library ( 523 GB) on a 1TB drive after editing the photos and after exporting one folder of images the program quit and then asked me to repair which I tried hung up at 99% and would not open the event thumbnails . I have tried everything even trying to transfer the particular event from that library to a new library using iphoto manager just so I can export my project and send but still no success as it is telling me that it is getting no info from the library, I changed permissions on the drive ..still no success . I restarted Iphoto and it took hours to show the images but all events thumnails said "0" and it shows all the event cover photos as a gray photo with a palm tree in it or something . I tried rebuilding again this morning and the new library says "0" photos and a library size of 7.3 mb
    I got my own Macbook 17in back yesterday and downloaded Mountain Lion to my machine and Iphoto 9.3
    I tried to open the library which is 523 GB of images that used to work fine before getting an error message saying it needed to be repaired. I tried opening it with Iphoto 9.3 via I photo manager which told be that there were inconsistencies in the library and it needed to be repaired I chose that option and it is now the following day still "rebuilding thumbnails" since last night . This is a huge problem I have missed project deadlines and my income is severely affected by this situation of not being able to access my work. What can I do to fix this, access my files and export my overdue project at this point ?

    Terence I find it surprising that you would say use Iphoto Manager after saying that I used it to rebuild using it took me to 99% of the way and just hung. I even spent my $20 and got the latest version 3.8.3  which was supposed to remedy these issues. See below my email to Fat Cat software the makers of Iphoto Manager:
    "Email to Fat Cat Software : Re Iphoto problems:
    My Macbook Pro running Snow Leopard, had hard drive failure so I had to borrow a friends similar machine to access my iPhoto library ( 523 GB) on a 1TB drive
    after editing the photos and after exporting one folder of images the program quit and the asked me to repair which i tried …it hung up at 99% and would not open the event thumbnails .I have tried everything trying to transfer the particular event from the library to a new library using Iphoto Manager just so I can work on my project but still no success as IPLM is telling me that it is getting no info from the library, I changed permissions on the drive ..still no success .
    I opened it using IPLM and it took hours to show the images but all events said "0" and it shows all the event cover photos as a gray photo with a palm tree in it or something . I tried rebuilding again this morning and the new library says "0" photos and a library size of 7.3 mb . There
    really seems to be a serious problem with Iphoto 9.3 as it
    asks you to rebuild or repair the library then IPLM stops at 99% leaving
    the thumbnails
    unviewable and just hangs up after that or wont open and there the problems start.
    Please advise and give me some viable options on this issue."
    Its days later and the support at Fat Cat software emailed me asking a question and are apparently just as floored as I am with this malfunction ..I hope they are working feverishly to address this as my conclusion and solution is as follows :
    Using the older version of Iphoto Library Manager when my machine asked me to upgrade and rebuild instead of the first aid function in Iphoto 9.3 did not help but actually corrupted my library and downloading the latest version did not help remedy it either. What I should have done and am now doing is using the Iphoto first Aid function in Mountain Lion and Iphoto 9.3 using option command to rebuild the entire library. So far it is working with no hangups ...it is now rebuilding image version number 6715 and counting with 33000+ images to go ..if this solution really rebuilds then that is the ONLY way to go with this issue which has cost me a lot of time and money in missed deadlines , lost income and lost business . Iphoto and Iphoto Library manager are normally great in what their purposes are and in ease of use and function but whenawry with compatibility in version software issues arise things go terribly awry and the tedious painstaking fixes available that go for days on end  just do not cut it.

  • My I Mac showed an error while updating the OS and now just hangs. What should I do?

    I Mac asked me to update the OS from 10.7.3. It showed an error and now the computer just hangs. Its become excuriatingly slow. Takes about 15-20 minutes to boot up and takes hours to perform any function. I tried to update the OS again but it keeps showing an error in connecting to the server. What do I do.?

    Have you tried booting into the Recovery HD to check/repair your disk. Restart holding Command+R - once booted select Disk Utility and then select Macintosh HD and click on 'repair disk' If it fixes anything click repair disk again until you get a clean pass. Whilst in Disk Utility you could also 'repair disk permissions' With Macintosh HD still selected click on 'repair disk permissions'. Once done, restart as normal from the Apple menu.
    Then try updating again using the 'combo', available here: http://support.apple.com/kb/DL1582
    If you still have problems you could try a Safe Boot: restart holding down the shift key until you see the grey progress bar. Once booted restart as normal from the Apple menu.

  • Hi, I was importing pictures into iPhoto from my sd card and suddenly iPhoto quit.  Now it just won't open.  When I click on the iphoto icon in the dock, nothing happens!  Does anyone have a solution to this problem please?

    Hi, I was importing pictures into iPhoto from my sd card and suddenly iPhoto quit.  Now it just won't open.  When I click on the iphoto icon in the dock, nothing happens!  Does anyone have a solution to this problem please?

    As a test launch iPhoto with the Option key held down and create a new, test library.  Import some photos and test to see if the same problem persists. Does it?
    If it does then your current library has been damaged and should be repaired: apply the two fixes below in order as needed:
    Fix #1
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Since only one option can be run at a time start
    with Option #4 and then #1 as needed.
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    1 - download iPhoto Library Manager and launch.
    2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
    4 - In the next  window name the new library and select the location you want it to be placed.
    5 - Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments.  However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

  • I just installed last versión of iphoto and it erased my iPhoto events. Now i dont have iphoto library anymore and i only have my events in iPhone and in MobileMe gallery. How can i download and migrate events in MobileMe gallery to events in iPhoto ?

    I just installed last versión of iphoto and it erased my iPhoto events. Now i dont have iphoto library anymore and i only have my events in iPhone and in MobileMe gallery. How can i download and migrate events in MobileMe gallery to events in iPhoto ?

    O also installed lion before and as i had filevault activated y lost my user information in timemachine. So, i have a useless backup. I only have events in iPhone ( due i didnt sync photos) and in MobileMe gallery, and i already migrate to iCloud. So?

  • I just upgraded to ilife iphoto 09. Now when I alter images in iphoto the iphoto 8.1.2 program freezes up. I have downloaded all the latest updates from apple, but nothing seems to correct this.  Anyone else experience this?

    I just upgraded to ilife iphoto 09.  Now when I alter images in iphoto 8.1.2 the program freezes up. I have downloaded all of the latest updates from apple, but nothing seems to correct this problem.  Has anyone else experienced this?
    Thanks for your reply,
    LuAnn
    <Email Edited by Host>

    To re-install iPhoto
    1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
    2a: On 10.5:  Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
    2b: On 10.6: Those receipts may be found as follows:  In the Finder use the Go menu and select Go To Folder. In the resulting window type
    /var/db/receipts/
    2c: on 10.7 they're at
    /private/var/db/receipts
    A Finder Window will open at that location and you can remove the iPhoto pkg files.
    3. Re-install.
    If you purchased an iLife Disk, then iPhoto is on it.
    If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
    If you purchased it on the App Store you can find it in your Purchases List.

  • IPhoto just froze so I Force Quit the iPhoto app and now I have lost half my (hundreds) of photos. How do I restore them?

    iPhoto just froze so I Force Quit the iPhoto app and now I have lost half my (hundreds) of photos. How do I restore them?

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.  
    Regards
    TD

  • I bought a new MacBookPro moved everything from old MacBookPro, new machine runs 10.6.7 - but iPhoto won't 'upgrade' the library - just hangs up supposedly while writing new library. help. thanks.

    i bought a new MacBookPro moved everything from old MacBookPro, new machine runs 10.6.7 - but iPhoto won't 'upgrade' the library - just hangs up supposedly while writing new library. help. thanks.

    How did you "move everything" over?
    Migration assistance does not handle the iPhoto library well sometimes - the best way is to drag the bad iphoto library from the pictures folder on the new system to the desktop, connect the two systems together (network, firewire target mode, etc) and drag the iPhoto library intact as a single entity from the old system to the pictures folder of the new system and launch iPhoto on the new system - it will open and convert the iPhoto library as necessary and you will be fine - once you test the iPhoto library you can delete the one on the desktop
    LN

  • IPhoto just stopped working. It loads pictures, but then goes into rainbow wheel forever. Then I try to force quit it, and then the whole Mac hangs up (had to power cycle it to get it back). I am using OS 10.5.8, and when I run software update, it assures

    iPhoto just stopped working. It loads pictures, but then goes into rainbow wheel forever. Then I try to force quit it, and then the whole Mac hangs up (had to power cycle it to get it back). I am using OS 10.5.8, and when I run software update, it assures me I have up to date software. I have not added any photos since the last time I used it, probably less than a month ago. What gives?

    Try these in order - from best option on down...
    1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library allowing it to overwrite the damaged file.
    2. Download <a href="http://www.fatcatsoftware.com/iplm/"><b><u>iPhoto Library Manager</b></u></a> and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
    3. If neither of these work then you'll need to create and populate a new library.
    To create and populate a new *iPhoto 6* library:
    Note this will give you a working library with the same Rolls and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
    Move the iPhoto Library to the desktop
    Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
    Go into the iPhoto Library on your desktop and find the Originals folder. From the Originals folder drag the individual Roll Folders to the iPhoto Window and it will recreate them in the new library.
    When you're sure all is well you can delete the iPhoto Library on your desktop.
    In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.

  • I have just upgraded to iPhoto 11.  Now all the faces I had named in my iPhoto library are unnamed.  How do I fix this?

    I have just upgraded to iPhoto 11.  Now all the faces I had named in my iPhoto library are unnamed.  How do I fix this?

    Restore a Known-good back up and update that to iPhoto 11.
    Regards
    TD

  • Upgraded to osx lion via bootable USB stick but start up now just hangs on the grey apple screen

    Hi.  I've just recently upgraded from snow leopard to osx lion 10.7.3 on my laptop and it works perfectly! However I then tried installing on desktop and problems......
    1. I got the 'the error can't install message' so after researching' I made a bootable USB stick with lion on it.
    2. Installed on start up from bootable USB stick, no problems their.
    3. Restarted and it just hangs in the grey apple screen.
    I've reset the PRAM, started in safe mode, fixed disk permission etc, Even done this (http://hints.macworld.com/article.php?story=20070204093925888).
    I'm going to leave the grey screen over night to see if it does start up, but then we have the problem of an extremely slow start up.
    So.... I am posting this to find out if anyone else has this problem and fixed it without having to do a full clean install as some data like email lists etc I never backed up (I know stupid).
    Hope someone can help as i am lost on what else to try.
    HELP!?!?!?
    Dan.

    Update 01.03.12
    Computer is starting now but.... It takes 10 minutes and that is without my sound card, hardware and external hard drives plugged in, gonna test that now.
    Are their and fixes for slow start ups?
    Dan.

Maybe you are looking for

  • Problem uploading a file to tomcat

    Hey! Im tyring to upload a file to a subdirectory of the root folder in Tomcat Apache but it gives me a "Access denied" error message... Im using the org.apache.commons.fileupload classes. Has anybody got an idea on what could be wrong? Im not all th

  • Securing network of WRT-54GSV2

    I purchased this unit at a thrift store in excellent condition but no manual. Linksys want $ 30.00 to tell me how to secure my network from public...any1 know how???? (Mod note: Edited for guideline compliance.) Message Edited by kent07 on 03-29-2010

  • Cache Event polling S_NQ_EPT in Cluster Env.

    Hi, How to use event polling mechanism in Clustered Env to purge cache ? It works fine in non - clustered env. I'm getting errors - 2009-12-16 15:40:45 [55003] The cache polling SELECT query failed for table S_NQ_EPT. 2009-12-16 15:40:45 [nQSError: 1

  • ORA 28817 PLSQL function returned an error . when Access instance apex 4 2

    Hello, I have just upgraded from apex 4.1 to apex 4.2. Everything is fine except for this error that I get when I try to access Instance Setting on the Admin App (localhost/apex/apex_admin) ORA-28817: PL/SQL function returned an errorWhat could be th

  • Setting color for cells in a particular column of a jtable

    Hi, I know how to set the color for a cell in a column if the cell contains an Integer object and if I have default Integers already in the JTable when I begin. However I want the JTable to look blank at the beginning. As I can't make an Integer obje