Iphoto 09 slideshow, music is not coming out when i export to idvd

hello,
I made a slideshow with about 500 pictures in iphoto 09. I aded music- several songs using a custom playlist. The music plays when i preview the slideshow in iphoto, but when i checked it after exporting (sharing to idvd) idvd the music does not play when i preview the slideshow before burning in idvd. I tried exporting a short slideshow and the music played back. Any suggestions?
thanks

Is any of the music purchased from the iTunes Store?
Regards
TD

Similar Messages

IPhoto slideshow music does not transfer correctly to Apple TV

When I set up a slideshow on my iMac and add music it plays correctly on the computer.
If I select the same slideshow on the Apple TV the photos display correctly but the music played is not the same as the track selected on the computer.
The only way I can play music with the slideshow on the ATV is to select the track required on the ATV.
I was under the impression that any slideshow set up on the computer would automatically transfer to the ATV and would remain intact for subsequent selection and viewing, is this not right?
Any advice wouyld be appreciated.
Thanks.

I never bothered delving into the why's and wherefore's of why it did this, but have assumed it is something to do with the transitions and how the differing frame rates on the mac and tv are reflected in the time scale of photo slide shows. I suppose what I'm saying is that's it possibly isn't the easiest thing to fix.

IPhoto Slideshow music is not heard on Airplay device

I have created a Slideshow in iPhoto and selected the Ken Burns template. When I play the slideshow on the MBPro, the sound is heard on the laptop. When I select Airplay for my AppleTV device and try to play it, there is no sound on either the MBPro or the AppleTV device. The AppleTV device is connected to my receiver using an HDMI cable, and I have HDMI selected as the audio source on it.
Any ideas on how to get this to work?

Do you have restrictions set in Settings?

Images are not coming out when application running through jar file.

I have written an application program using j2sdk1.4.1 that needs your help.
My application folder's contents.....................
     C:\Examination\Examination.class <-----This is the main class and application's entry point.
     C:\Examination\ExamBox.class
     C:\Examination\PaperSetterBox.class
     C:\Examination\pspBox.class
     C:\Examination\epBox.class
     C:\Examination\TimerBox.class
     C:\Examination\ReportCardBox.class
     C:\Examination\HelpBox.class
     C:\Examination\AboutBox.class
     C:\Examination\Images\(some jpg & gif files)
     C:\Examination\Sounds\(some au files)
Compilation Report:     There was no error.
Execution Report :     Was working properly using the command:- java Examination
Now, I created a jar file for my application in the following steps.................................
          STEP-1:          Firstly, I created a text file(mainclassInfo.txt) that contains
          the line:--     Main-Class: Examination
          This line would be automatically added to the default manifest file when I would include the                name of that text file with the command to create the jar file.
          Location of the text file I created:     C:\mainClassInfo.txt
          STEP-2:          Then I went to C:\Examination and executed the following command(by using                'Command prompt'):--------------------------------------------------------------------
jar cmf C:\mainClassInfo.txt Examination.jar Examination.class ExamBox.class PaperSetterBox.class pspBox.class epBox.class TimerBox.class ReportCardBox.class HelpBox.class AboutBox.class Images Sounds
Finally, I got the jar file:-     Examination.jar
Double clicking on it application ran as it was expected.
Then, I thought, that as all the files & folders the application needed to run properly were packaged in the jar file; I should delete all the contents of the folder 'Examination', so that no one could see or use anything of the resources easily. I did that.
So, then it became only:-- C:\Examination\Examination.jar
Thereafter, I tried to run the application again and there a problem occurred! The application was running, but the images, those were to be used and shown by the application were missing somehow!!
Moreover, when I kept a copy of those 2 folders('Images' and 'Sounds') into the C:\Examination and ran the application again all the images came out normally!
I just can't understand why it's happening so mysterious?
I don't want to leave anything of the resources in an open place; I mean, outside of the jar file. The images should be used and shown by the application.
Help me please!

double post http://forum.java.sun.com/thread.jspa?threadID=582311

I made a slide show with music and random transitions in iPhoto. I can't burn it to a DVD. The burn button in iPhoto is not highlighted, and when I exported the slide show to iDVD, it lost the random transistions, and the disk won't play in DVD player.

Two problems: 1. My iphoto slide show loses its random transitions when I export it to iDVD.
2. When I then burn it to a disk, the disk will not play in a DVD player, but only on my MAC.
Any ideas?

The random transitions can only be random when played in iPhoto.
If you are in the slideshow mode and use the Share ➙ iDVD menu option a quictime movie will be created of the slideshow with the first random set of transitions and imported into iDVD. The transitions, however, will be fixed permanently and will not be changed again.
There is no way to get any sort of random behavior in an iDVD. When it's burned to disk it's locked permanently.
OT

IPhoto slideshow music problem.....

When the slideshow is played on the iPhoto Application in the computer, it plays all the music listed in the album chosen. HOWEVER, when exported to a CD disk it will only play the first song and then no more music for the rest of the slide show. This has been frustrating.....

Hi John,
this has been a know glitch that shows up for some .
Only one song exporting with Slideshows
Right now, this seems to be a know problem/bug. There have been some work-arounds. Don't know if the problem is with iPhoto, Quicktime or a combo of both.
-From Bob Worthington: re-ripping the cuts I wanted as background music for the DVD as a single cut in iTunes. I then made a playlist containing the one extended cut of music.
-Old Toad: share to Quicktime from iPhoto and then import the resulting movie into iMovie you can extract and delete the audio from the video and add the two songs to the video and save.
Quicktime Pro-open the movie and bring up the Movie Properties menu window. In the top window select the audio track and delete it.
If you want more than one song you'll have to join them together with iMovie or some other application. Then open that joined file with QT Player. Then do a select all and copy. Now go to the QT window of the movie and select the Edit->Add to Movie menu option. You don't want to scale it because it will change the play speed of the audio unless it's time is exactly the same as the movie.
You could go the other way, open the movie, select all and copy, and then past with scaling to the audio. That will change the speed of the movie and transitions to fit the audio track. In this case the resulting video file will have the name of the audio track file that you started with.
You may have to play with it a bit to get exactly what you want. Be sure to work with copies of all the media files for the project.
-Peter Burtwistle: I opened the Qt movie that iPhoto makes when you export to iDVD and removed the sound track.
Then made a new soundtrack by opening all three songs in QT, then cutting and pasting them together.
Finally use QT Pro's 'Add to Movie" option to add the soundtrack to the original movie.
This worked well and was fast to do too.
-Joe Lombardo: I ended up having to extend the songs by 20 seconds so I brought them all into GarageBand and made some edits. Then I exported them all to iTunes as a single track and used that for the slideshow
From scotty321 at MacOSXHints.com: If you have Roxio Toast Titanium installed on your machine, you can join unprotected tracks yourself by simulating a disc burn. Simply take these steps:
Go to the Audio tab in Toast.
Drag your audio files from iTunes into Toast.
Reshuffle them in the proper order within Toast.
Go up to File: Save As Disc Image. Save your disc image somewhere on your Desktop.
Choose Utilities: Mount Disc Image. The CD will mount on your desktop, and iTunes will think that you just inserted a CD.
Within iTunes, select the tracks that you want to join and then use Advanced: Join CD Tracks.
Go through the import process, and you've got a joined track! Simply rename the track to whatever you want to call it, and you're good to go.
From Lori...
Burn the playlist in iTunes.
Make sure you have itunes Prefs just open the Cd and not automatically play or import the songs.
Insert the burned CD and iTunes will open.
Within iTunes, select the tracks that you want to join and then use Advanced: Join CD Tracks.
Go to Advanced>convert selection to AAC.
When done, make a new playlist named after the slideshow.
Put the new combined track into the playlist.
In iPhoto, select this playlist for your slideshow.

VFL Speaker sound from both the front speakers while FR sound is not coming out at all.

I have a creative gigaworks s750 connected to a xtreme gamer sound card. The system was working absolutely fine but now it has started behaving very strangely; system is playing back Front Left Speaker sound from both the front speakers while Front Right sound is not coming out at all. If i click the front right speaker in audio console speaker setup wizard, no sound comes. However when i click the front left speaker, sound comes out of both speakers. I counter checked it with playing 5.1 dts movie and muting all the speakers except the front left one from ac3 filter, sound came out of both the front speakers. However when i muted all the channel except the front right, no sound was coming out of front right speaker.
Message Edited by hussain on 06-10-2009 10:26 PM

Just want to add another relieved reader of this thread. I had lost the sound to my speakers even though I had sound to headphones. I was convinced it was a damaged headphone jack because I had pushed the headphone plug in harder the last evening when my wife complained that she could still hear the speakers while I listened with the headphones. The next morning--no speaker sound.
I spent a few hours searching the web to see how to disassemble a satellite A505 and get to the jack. But I wasn't even sure I could get a proper replacement jack that fit, and I was concerned that small damage, say to the ribbon connectors could render the computer useless--a large price to pay for just missing audio.
Fortunately, I stumbled onto this thread and I recalled I had put the unit to sleep the night before--something I don't usually do, but I didn't want all the Chrome web sites to have to reload so I just put it to sleep.
When I put it to sleep again and fired it up--Sound! I am so glad to find this solution so I just want to let people know it remains a viable option.
Doug

TS2097 I inserted a new DVD, it is working but not coming out. Whenever I try to eject it, it does not come out. Apple should provide us the easy and manual way to eject CD/DVD or?

Hello,
I inserted a new DVD in my mac book pro, its working and the drive is reading the dvd but unfortunately is not coming out. I have tried several ways mentioned on all over the net and apple community websites but nothing has worked so far.
I need a easier and manual way to eject the DVD. Where is apple's help?
Please help me. This is one of the weaknesses Apple should work on because it is causing us pain and loss of efficiency which is not apple's quality.
Thanks

Thanks for asking, actually I just found a trick on a website.
It siad that restart MBP while holding eject button, I did it and DVD came out right away.
I hope that this works out for everyone.
But still there is a need for a manual eject system so that people don't worry about stucking the DVD or CD in th drive.
Thanks anyway dear.

BPM Collect pattern is not coming out and it is in loop.

Hi Experts,
We have implemented a BPM Collect Time pattern and it was working fine in Dev and QA environments perfectly. Couple of days back we have some server issue in Dev environment and Basis team has done some thing with File Storage. From that time, all our BPM's were not working in Dev. It is showing that the block is waiting for some event to trigger and it is in Process state. We have set it for 5 min and block is not coming out from loop. We exported the code to QA and it is working in QA. We tried SWU3 transaction as given in the below forum and it didn't help us.
bpm collect time infinite loop error
Some one please help us.
Thanks
Venkat
Edited by: Venkata Gupta on Nov 27, 2008 12:54 AM

Hi
Is Your BPM having deadline branch ?
If there is any system Exception then catch it.
http://help.sap.com/saphelp_nw04/helpdata/en/33/4a773f12f14a18e10000000a114084/content.htm.
According to thread mentioned by you ,Schedule your Missed Deadline Branch.
Also check your BPM using transaction SXMB_MONI_BPE and find out which step have error.

Laptop is not coming out from hibernating

regardings,my laptop is not coming out from hibernation. it is showing that is is going to hibernate but stuck there.it is showing that it is working. i wait for an hour but result is tha same. then i tried to restart but same result. can u help me in this metter

It's hard to say what the problem is. One recomendation would be to drop usage of the database connectivity toolkit as it adds a lot of complexity and limits your options for troubleshooting problems. There is an alternative here. Read the discussion and download the drivers...
Also, what kind of database are you connecting to?
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

My sim is stuck in simtray and simtray is not coming out.What should i do?

My sim is stuck in sim tray and it is not coming out.What should i do?

There are instructions on this page for getting the sim tray out : http://support.apple.com/kb/HT4577 . Does that not work ?

Ink not coming out from new cartridge

I purchased the color and black cartridge from HP store. After installation the black ink is not coming out. Tried and checked all software settings and it seems the cartridge have some problem. Contacted customer service but no help. Can any one help?
It is a 3515 deskjet all in one printer and printer head is not detachable.

Hi jkoley, and welcome to the HP Forums!
I see you are running into black ink issues. I would like to help.
I would recommend removing the ink cartridges, and performing a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would also recommend utilizing the steps in this document on Fixing Ink Streaks, Faded Prints, and Other Common Print Quality Problems.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

When using photoshop elements as editor in iPhoto the pic does not show up when PS opens

When using photoshop elements as editor in iPhoto the pic does not show up when PS opens

Ralph9430 offers a good suggestion. But you may need to do this before taking his advice:
Check in iPhoto's Preferences (which you can open from the iPhoto menu). Look in General, and make sure "Connecting Camera Opens" is set to "Image Capture").
If it is set to "iPhoto", you won't be able to get to Image Capture easily.

I am very sure I have " find my iPod" on my iPod device but , it's not coming up when I try to look for it in the radar?! Unfortunately my iPod was stolen at school. Any help

I am very sure I have " find my iPod" on my iPod device but , it's not coming up when I try to look for it in the radar?! Unfortunately my iPod was stolen at school. Any help

lost/stolen
No app on the iPod is required.
- If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected, on a computer browser go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up or conbtinue to show off-line.
- You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
iCloud: Erase your device
iCloud: Use Lost Mode
- If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
- Change the passwords for all accounts used on the iPod and report to police
- There is no way to prevent someone from restoring the iPod (it erases it) using it unless you had iOS 7 on the device. With iOS 7, one has to enter the Apple ID and password to restore the device.
- Apple will do nothing without a court order
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

Music does not stop playing when I disconnect from USB in car

When iphone is connected to car stereo, music does not stop playing when I disconnect the usb cable. If someone is calling me and I unplug from USB, all I hear in my ear is music...I cannot hear the person calling me. Not sure what's happened but it never used to do this. Any suggestions?

Nseries phones have behaved this way since forever.
I don't know any way to change this. Same behavior happens if you unplug your headset or headphones.
640K Should be enough for everybody
El_Loco Nokia Video Blog

Iphoto 09 slideshow, music is not coming out when i export to idvd

Similar Messages

Maybe you are looking for