IPhoto '09 Slow to load - Coredata Fault Issue?

Every time I open up iPhoto as of late it's really slow to load. At least a good minute. I've only got 7GBs of photos (about 5000 photos). I don't seem to have any issues that would require a rebuild so I'm not sure what's up. I checked Console and below is the fault I'm getting. Any thoughts out there?
5/27/11 6:34:31 AM iPhoto[896] Exception writing metadata: CoreData could not fulfill a fault for '0x1b81ced0 <x-coredata://D008F319-958D-4A27-B17B-A1DD30FE62CC/ABCDEmailAddress/p2952>'

Honestly I don't know.
Speed issues are tricky. You have 2 gigs of RAM and that's not a lot - especially if you have other apps running, so that might be part of it.
Low disk space can have a big impact on performance, but that's not an issue here.
A corrupted library or bunged up cache file can cause problems, but I would expect that a new Library would open snappily.
Create a new account (systempreferences -> accounts) and see if the problem is repeated there. If it is, then a re-install of the app might be indicated. If it's not, then it's likely the app is okay and the problem is something in the main account.
Regards
TD

Similar Messages

Since upgrading to Mavericks, Mail is extremely slow to load preview pane or show email when mailbox is double-clicked. Is this a known issue?

Since upgrading to Mavericks, Mail is extremely slow to load the preview pane or show email when mailbox is double-clicked. Is this a known issue? Or is there a solution to this issue?

Hi AngieLynch,
Thanks for visiting Apple Support Communities.
It sounds like you're seeing some unexpected behavior in Mail.
Before troubleshooting on your computer, I'd strongly recommend backing up your data to an external hard drive with Time Machine, if you haven't already. This article can help with setting up Time Machine:
Mac Basics: Time Machine backs up your Mac
http://support.apple.com/kb/ht1427
Next, try creating a new user account on your computer. You can add your email account to Mail in the new user account. If Mail is more responsive in the new user account, then Mavericks is working fine and the behavior is caused by conflicts in your own Mail or user account.
These articles walk you through creating a new user and setting up Mail:
OS X Mountain Lion: Create a new user account (applies to Mavericks, too.)
http://support.apple.com/kb/PH11468
Configuring Mail for your email account
http://support.apple.com/kb/HT1277
Best,
Jeremy

Major performance issue: AIR browser is slow to load AJAX app & kills CPU

Hello,
This issue for so long. I tried to submit a ticket that was erased.
Here's someone else talking about that topic: http://forums.adobe.com/message/3896291#3896291
My question - Is there a solution ahead or I have to wait patiently that all my clients uninstall the application?

The bug referenced in that thread, AIR browser is slow to load AJAX app, is still open/to track. Based off the notes from Jian on Nov 6th, we've been able to reproduce the issue but it does not have enough votes to qualify for our current releases. We need additional users to cast their votes that this is impacting their applications.
There is a note on November 11th, that suggests that removing inset box shadows can resolve this issue in some cases. This is most likely similar to other known bugs where -webkit-box-shadow impacts performance on Windows. All cases have been deferred at this time as the solution is not trivial to address (I've personally entered this bug at least twice.)
Chris

TS1398 My ipad3 seems to have connection issues. It is wifi only but keeps losing the connection and is really slow in loading pages - a bit like dial-up speed! My iPhone 4s and daughters' ipad2 have no problems at all. Any ideas anyone?

My ipad3 seems to have connection issues. It is wifi only but keeps losing the connection and is really slow in loading pages - a bit like dial-up speed! My iPhone 4s and daughters' ipad2 have no problems at all. Any ideas anyone?

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

IMovie '11 slow to load at every launch (large iPhoto library to blame?)

I'm running 10.6.7 on a late 2010 13" macbook pro. I have a very large iphoto library (over 200GB) that is full of movies made with various digital cameras. I do have a casio AVI video codec installed into quicktime as a plugin, fyi, but all the movies and clips open fine within iPhoto when I double click them.
The first time I opened up iMovie it said that it needed to scan the iphoto library and then create thumbnails. This took several hours, but finally completed. When it finished, I could see all of my movies as events in the iPhoto Videos section of the Event Library within iMovie.
The problem I'm having is that every time I launch iMovie it takes 5 minutes or more to actually open up. The program launches and then I get the spinning beach ball. Opening activity monitor and shows iMovie as "unresponsive" and there is massive disk read activity for a long time. It seems like it's scanning my drive and looking at a LOT of the files. Gigabytes of data is read. After a while, it finally settles down and I can see all the events. All of my clips appear to play fine within iMovie. But it makes using the program somewhat an awful experience as everytime I open iMovie I have to wait such a long time.
I tried trashing the preference file for iMovie and it asked me to recreate all the iPhoto library thumbnails. But I was back to square one aftewards, the same thing... long, long startup time.
Any thoughts or helpful ideas would be much appreciated.
Thanks in advance.

iMovie remembers which you worked with last time you used it. If this is your iPhoto Library it will load all the thumbnails from iPhoto.
To manage your movie clips yourself you can make "events" for them.
1) Make a new event from the File menu.
2) Drag in the clips from iPhoto to that event.
3) Wait until iMovie has made thumbnails for these clips only.
When you quit iMovie it will remember that you worked with this event the last time and it will only load those thumbnails. Much faster. And you can create a new event for the next batch of raw footage.
The downside of this is that you get some videos duplicated so you have them in both iPhoto and iMovie on your disk.

My email is extremely slow to load from my 4 separate accounts. One of the accounts goes off line all the time. It is not a service provider issue. I think my passwords and ports may be all mixed up because I tried to adjust it myself. How can I fix?

My email is very slow to load from 4 separate accounts. I think I messed up ports and SSL when I tried to fix it. How do I fix this?

Hello Mary,
You may have multiple entries.
Open Keychain Access in Utilities, enter the part after the @ sign in the search bar, hit enter
The Password rejection can confuse people since it's a catch all meaning...
This Password, Username, Authentication method... is not recognized on this Port to this Server, more than one entry in Keychain for each in/out entry, or a server end problem.
If using a browser to login via WebMail works it's not Name or Password, but one of the other ones.
The receiving email ports are:
IMAP is port 143
IMAP-SSL is port 993
POP is port 110
POP-SSL is port 995
Outgoing ports are...
SMTP and SMTP-SSL is on ports 25, 587 and 465. Port 587 has to be SSL, and port 465 is enforced TLS-wrapped and is generally used by Outlook users.

My iphoto will not load, all it does when i open it is just show a blank iphoto and won't load any of my photos that were already in there.

My iphoto will not load, all it does when i open it is just show a blank iphoto and won't load any of my photos that were already in there. Any way to fix it ?

Remember: we cannot see your machine. There are 9 different versions of iPhoto and they run on 8 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Basic things like :
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For instance: 'iPhoto won't export' is best explained by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted?
- Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.

Web pages slow to load with IE11 and the cursor/mouse is very slow to work until after page loads

Web pages are very slow to load, I hve run Norton Eraser and found no issues that would cause this

New HP Pavilion three weeks ago. After several attempts by the 'experts' I finally got a straight answer from a tech in the Philipines yesterday, 01-29-2015. HP and Microsoft are working to resolve the issue of slow pages and a dead cursor until the next page finally loads. You may have discovered that Google Chrome DOES NOT have this issue. Comments about HP would not be allowed here so I will just say, use Chrome until the issue with IE 11 is resolved.

Pages are slow to load or stop loading

Once I'm connected to wi-fi, my pages are slow to load or stop loading and tell me 'I'm not connected".

If you are having the problem on more than one computer it would appear not to be a computer fault or your browser that is the problem.
The first thing I would do is a factory reset of the homehub by pressing a pin into the recess button on the rear for about 20 seconds. This can often sort out problems and will also give you a "clean sheet" to start some diagnostics from.
If this doesn't help please post what Infinity package you are on, I assume with 18Mbps it's Infinity 1 but please confirm, and do you have an Openreach modem and what homehub you have.
Also run this checker and post back a screen shot of the results
http://www.dslchecker.bt.com/adsl/adslchecker.welcome
and use this speed tester then carry out the further diagnostics and post back a screen shot of all the results including your IP profile for up and down. This test must be done with a wired connection.
http://speedtest.btwholesale.com/

Acrobat 9 Pro, v9.5.5 Slow to Load

my issue is acrobat 9 pro, v9.9.9 is slow to load (take 45 to over 100 seconds to either load from Start menu of file manager
- Window 7 Home Premium, sp1, 64 bit
- acrobat has been installed for years, this started with 9.5.4 and is the same under 9.5.5
- have not loaded any new software
- event viewer does not show any "errors" happening as I open Acrobat
- when I try to close Acrobat it shows that Acrobat has stopped responding so something is "hanging up" but no indication what that might be
I would appreciate thoughts on what to try or look at next -
Thanks
Jamie

check your running processes and terminate them in an organized way to determine which process is causing the problem.

Safari 5.1.10 slow/not loading on iMac os x 10.6.8

Hello,
Recently my Safari is VERY slow, it is not loading some web pages properly, and not uploading or displaying some pictures.
I havent done anything diferent or uploadae any updates.
I have tried everything to resolve the issue-
-empty cache,
-check for up-dates,
-reinstall safari (twice!)
-Check broadband (I have a new macbook pro, and Safari works fine on this as it is a more recent version)
-remove all extensions
- even checked my HD!
Please help if you have any suggestions,...this is driving me mad, as I can't even access email on gmail!
Thanks in advance!

How do you turn IPv6 off in Safari 5.1.10?
I don't see anyway to do this.
Lately, Safari is not only loading slowly upon initial opening, but it's also slow to load new pages, and it's regularly loosing contact with webpages in previous tabs I opened. I'll go back to a tab, after moving to a new one, only to find it blank, and then I have to reload it, which takes f o r e v e r !
Then I find my entire system get stuck and I can't do anything. Sometimes I can force quit an application and other times not. Many times lately, I find my computer is just frozen and all I can do is reboot it manually to get it working again.

Zen X-Fi2 extremely slow when loading playlists!

0Zen X-Fi2 extremely slow when loading playlists!?I recently purchased a Zen X-Fi2 64gb. I'd been waiting for a player of this size for a few years now but Creative was behind the power curve so I temporarily switched to an Archos 80gb. After the Archos began to annoy me I ended up just going with the Zen 32gb flash based player. It works/ed great. This new Zen X-Fi2 however is unbearably slow! I don't mind quite sometime to rebuild the library once the initial sync is done but when it takes 5 minutes to load a playlist (3000+ songs) then I get upset. It takes so long to load said playlist that the player shuts off before it has time to load all the songs. I can't even just click play right away like I could on the Zen. The only way I've been able to get around it is to tap the screen twice. Once to load the playlist (which takes forever if it's more than 00 songs) and again to play once the lengthy loading process is over with. However even then it doesn't load all the songs. I've been communicating with tech support about this with no resolution in sight. All they keep telling me is how 'normal' it is for a player to load a large number of songs. My Zen which is an MTP player syncs and plays music much faster! Is there anyway to possibly upgrade this to an MTP player?

Hi Vokivolli,
Almost 2 months on from your original post I see that you have received no reply from an administrator. Are these problems still persisting with your player? I have an X-Fi Style too and am experiencing the same problems. Like you I was hoping that firmware updates would address the problem. I don't think that the Style is a priority for Creative and unfortunately I don't see them bothering to solve these issues. Hope I'm wrong cos otherwise I love the X-Fi Style.

Slow index loading on mobile devices

Hi, my organisation is trialing the new RH10 multiscreen html 5 output.
Our techincal documentation includes a very large index (7000+ terms).
The index loads fine on a desktop (Chrome/FF -- under 5 seconds and IE8 -- over 10 seconds), however when we try to load the same index on a mobile device, it takes 2-5 minutes.
Is this a known issue?
Is there a way to fix it?
Suggested fix (if Robo devs are listening):
Create an option that outputs chunked index data in JSON format (currently XML) then parse JSON to the index tree loader for tree generation and search queries.
Thanks.
Here is the bug report I submitted:
Concise problem statement:
Very slow index loading (>3 minutes) on large indexes (7000+ terms). Does not seem to cache index data.
Steps to reproduce bug:
1.Create an index with over 7000 terms.
2.Generate Mutliscreen HTML5 output.
3.Open Index in mobile browser (Safari/Android)
4.Wait for entire index to finish loading.
5.Refresh index page.
Results:Very slow loading (>3 minutes). Does not seem to cache index data.
Expected results:Loads in under 1 minute

Hi,
Is the mobile device connected via WiFi or 3G? What mobile device are you using and have you tried others?
I suspect the sheer size of the index is the problem. Even if it works fast, nn index with 7000 entries is not very usable on a mobile device.
Greet,
Willam
tg_yshen <[email protected]>schreef:
>
>Slow index loading on mobile devices
>created by tg_yshen in Multiscreen HTML5 - View the full discussion
>Hi, my organisation is trialing the new RH10 multiscreen html 5 output.
>
>Our techincal documentation includes a very large index (7000+ terms).
>
>The index loads fine on a desktop (Chrome/FF -- under 5 seconds and IE8 -- over 10 seconds), however when we try to load the same index on a mobile device, it takes 2-5 minutes.
>
>Is this a known issue?
>
>Is there a way to fix it?
>
>Thanks.
>
>Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4695167#4695167
>
>To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4695167#4695167. In the Actions box on the right, click the Stop Email Notifications link.
>
>Start a new discussion in Multiscreen HTML5 by email or at Adobe Forums
>For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Web pages are very slow to load airport is fine and other users do not have any problems

my macbook pro is very slow to load web pages airport is running fine and other users do not have any issues?

Likely a corrupted cache, do #12 and #13 here, if that doesn't work run through the Steps 1+
Step by Step to fix your Mac
Why is my computer slow?

5.0.5 so slow to load

I have a new MacBook Pro running 10.6.8 and all of my browsers run well and load quickly EXCEPT Safari which is painfully slow to load EVERY single time. I have cleared cache and more...
anyone else having this problem?
It is as if SAFARI runs in MOLASSES MODE!
Help?

From your Safari menu bar click Safari / Preferences then select the Security tab. Deselect: Enable plug ins Quit then relaunch Safari. If Safari speeds up loading pages, troubleshooting help here. Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues
Check Safari / Preferences - Extensions. If you have any installed, turn that off, quit, relaunch Safari.
Quit Safari. Open a Finder window select your Home folder in the Sidebar on the left. Then open the Library folder, then the Caches folder, then the com.apple.Safari folder. Move the cache.db file from the com.apple.Safari folder to the Trash. Relaunch Safari.
Check for Login Items: Open System Preferences/Accounts then select the Login Items tab. Delete any files or apps you have listed there. And go to /Library/Startup Items. Move any files in the Startup Items folder to the Trash.
Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure you always have a minimum of 15% free disk space.
From the Safari menu bar click Safari / Reset Safari. Select the top 7 buttons, click Reset.
Try Safari in another user account. Same problems there, then log back into your admin account, launch Disk Utility. /Applications/Utillities.
Select MacintoshHD in the panel on the left then select the First Aid tab.
Click: Verify Disk (not Verify Disk Permissions). If the startup disk needs repairing, follow the instructions for Using Disk Utility to verify or repair disks

IPhoto '09 Slow to load - Coredata Fault Issue?

Similar Messages

Maybe you are looking for